一种新型肿瘤血管抗体Fab的基因克隆与表达

鼠单克隆抗体AA98是我室研制的一株新型抗肿瘤血管抗体,体内实验证明它可以抑制血管生成,抑制肿瘤生长。从分泌抗体AA98的杂交瘤细胞中提取总RNA,采用逆转录PCR(RT-PCR)分别扩增重链Fd及轻链κ,并进行序列测定。将Fd和κ链依次与噬菌粒pComb3H连接,构建pComb3H-AA98Fab表达载体。在大肠杆菌中表达了AA98Fab。免疫印迹表明该Fab片段识别分子量为100kD的蛋白,具有原抗体AA98的抗原特异性。AA98Fab是研究抗体AA98作用机理的工具,也为制备重组免疫毒素,尝试肿瘤血管靶向治疗实验打下了基础。     

Epiregulin Recognition Mechanisms by Anti-epiregulin Antibody 9E5: STRUCTURAL,FUNCTIONAL, AND MOLECULAR DYNAMICS SIMULATION ANALYSES*

Epiregulin (EPR) is a ligand of the epidermal growth factor (EGF) family that upon binding to its epidermal growth factor receptor (EGFR) stimulates proliferative signaling, especially in colon cancer cells. Here, we describe the three-dimensional structure of the EPR antibody (the 9E5(Fab) fragment) in the presence and absence of EPR. Among the six complementarity-determining regions (CDRs), CDR1–3 in the light chain and CDR2 in the heavy chain predominantly recognize EPR. In particular, CDR3 in the heavy chain dramatically moves with cis-trans isomerization of Pro¹⁰³. A molecular dynamics simulation and mutational analyses revealed that Arg⁴⁰ in EPR is a key residue for the specific binding of 9E5 IgG. From isothermal titration calorimetry analysis, the dissociation constant was determined to be 6.5 nm. Surface plasmon resonance analysis revealed that the dissociation rate of 9E5 IgG is extremely slow. The superimposed structure of 9E5(Fab)·EPR on the known complex structure of EGF·EGFR showed that the 9E5(Fab) paratope overlaps with Domains I and III on the EGFR, which reveals that the 9E5(Fab)·EPR complex could not bind to the EGFR. The 9E5 antibody will also be useful in medicine as a neutralizing antibody specific for colon cancer.     

Epitope mapping of gibberellin to the anti-gibberellin A(4) monoclonal antibody by saturation transfer difference NMR spectroscopy

Saturation transfer difference (STD) NMR spectroscopy is a promising tool for rapid screening, identifying ligands that interact with a target protein, and characterizing the epitopes of the ligands. Gibberellins (GAs) are a class of plant hormones and form a large family consisting of more than 120 members. A few of them, called "active" GAs, are considered to be perceptible to a receptor that remains unknown. We applied STD NMR spectroscopy to detect the binding activity and identify the binding epitope of gibberellin A(3) (GA(3)) that is recognized by monoclonal antibody 4-B8(8)/E9. This is one of the antibodies that can mimic a GA receptor in the manner of recognition of active GAs. The information on the binding epitope, obtained by STD NMR, was in good agreement with that shown by analyzing the crystal structure of the antibody-GA(4) complex. This suggests that STD NMR spectroscopy would be very useful to characterize the interaction between GAs and such binding proteins as GA-catabolic enzymes and receptors.     

Recombinant anti-stefin A Fab fragment: sequence analysis of the variable region and expression in Escherichia coli

Human stefin A is an inhibitor of lysosomal cysteine proteinases cathepsin B, H, L and S. In the present report we describe the cloning and expression of anti-stefin A Fab fragment A22 in E. coli. We have determined the nucleotide sequences of the antibody heavy and light chain and compared them to the murine immunoglobulin germ line sequences. Expression of the two antibody chains was achieved using a single vector with a PhoA promoter and coding regions placed after the signal sequences, directing them to the periplasmic space. The A22 Fab fragment was extracted from the periplasmic space and expression was confirmed by Western blot analysis. The recombinant A22 Fab fragment had an affinity for stefin A comparable to the original monoclonal antibody, as determined by ELISA.     

Single chain Fab (scFab) fragment

Background  

The connection of the variable part of the heavy chain (VH) and and the variable part of the light chain (VL) by a peptide linker to form a consecutive polypeptide chain (single chain antibody, scFv) was a breakthrough for the functional production of antibody fragments in Escherichia coli. Being double the size of fragment variable (Fv) fragments and requiring assembly of two independent polypeptide chains, functional Fab fragments are usually produced with significantly lower yields in E. coli. An antibody design combining stability and assay compatibility of the fragment antigen binding (Fab) with high level bacterial expression of single chain Fv fragments would be desirable. The desired antibody fragment should be both suitable for expression as soluble antibody in E. coli and antibody phage display.     

Display of a functional hetero-oligomeric catalytic antibody on the yeast cell surface

A functional hetero-oligomeric protein was, for the first time, displayed on the yeast cell surface. A hetero-oligomeric Fab fragment of the catalytic antibody 6D9 can hydrolyze a non-bioactive chloramphenicol monoester derivative to produce chloramphenicol. The gene encoding the light chain of the Fab fragment of 6D9 was expressed with the tandemly-linked C-terminal half of alpha-agglutinin. At the same time, the gene encoding the Fd fragment of the heavy chain of the Fab fragment was expressed as a secretion protein. The combined Fab fragment displayed and associated on the yeast cell surface had an intermolecular disulfide linkage between the light and heavy chains. This protein fragment catalyzed the hydrolysis of a chloramphenicol monoester derivative and exhibited high stability in binding with a transition-state analog (TSA). The catalytic reaction was also inhibited by the TSA. The successful display of a functional hetero-oligomeric catalytic antibody provides a useful model for the display of hetero-oligomeric proteins and enzymes.     

Structure, epitope mapping, and docking simulation of a gibberellin mimic peptide as a peptidyl mimotope for a hydrophobic ligand

Using NMR spectroscopy and simulated annealing calculations, we determined the solution structure of the disulfide-linked cyclized decapeptide ACLPWSDGPC (SD), which is bound to an anti-(gibberellin A(4)) mAb 4-B8(8)/E9 and was found to be the first peptidyl mimotope for a hydrophobic ligand. The resulting structure of the peptide showed a beta-turn-like conformation in residues three to seven and the region converges well (average rmsd 0.54 A). The binding activity and the epitopes of the peptide to the antibody were assessed using saturation transfer difference (STD)-NMR experiments. We also conducted docking simulations between the peptide and the mAb to determine how the peptide is bound to the mAb. Resonances around the beta-turn-like conformation of peptide SD (residues 3-5) showed strong STD enhancement, which agreed well with results from docking simulation between peptide SD and the mAb. Together with the commonality of amino acid residues of the mAb involved in interactions with gibberellin A(4) (GA(4)) and peptide SD, we concluded that peptide SD is bound to the antigen-binding site of mAb 4-B8(8)/E9 as a GA(4) mimic, confirming evidence for the existence of peptide mimics even for hydrophobic ligands.     

Antibody variable region binding by Staphylococcal protein A: thermodynamic analysis and location of the Fv binding site on E-domain.

Immunoglobulins of human heavy chain subgroup III have a binding site for Staphylococcal protein A on the heavy chain variable domain (V(H)), in addition to the well-known binding site on the Fc portion of the antibody. Thermodynamic characterization of this binding event and localization of the Fv-binding site on a domain of protein A is described. Isothermal titration calorimetry (ITC) was used to characterize the interaction between protein A or fragments of protein A and variants of the hu4D5 antibody Fab fragment. Analysis of binding isotherms obtained for titration of hu4D5 Fab with intact protein A suggests that 3-4 of the five immunoglobulin binding domains of full length protein A can bind simultaneously to Fab with a Ka of 5.5+/-0.5 x 10(5) M(-1). A synthetic single immunoglobulin binding domain, Z-domain, does not bind appreciably to hu4D5 Fab, but both the E and D domains are functional for hu4D5 Fab binding. Thermodynamic parameters for titration of the E-domain with hu4D5 Fab are n = 1.0+/-0.1, Ka = 2.0+/-0.3 x 10(5) M(-1), and deltaH = -7.1+/-0.4 kcal mol(-1). Similar binding thermodynamics are obtained for titration of the isolated V(H) domain with E-domain indicating that the E-domain binding site on Fab resides within V(H). E-domain binding to an IgG1 Fc yields a higher affinity interaction with thermodynamic parameters n = 2.2+/-0.1, Ka > 1.0 x 10(7) M(-1), and deltaH = -24.6+/-0.6 kcal mol(-1). Fc does not compete with Fab for binding to E-domain indicating that the two antibody fragments bind to different sites. Amide 1H and 15N resonances that undergo large changes in NMR chemical shift upon Fv binding map to a surface defined by helix-2 and helix-3 of E-domain, distinct from the Fc-binding site observed in the crystal structure of the B-domain/Fc complex. The Fv-binding region contains negatively charged residues and a small hydrophobic patch which complements the basic surface of the region of the V(H) domain implicated previously in protein A binding.     

Crystal structure of an Fab fragment in complex with a meningococcal serosubtype antigen and a protein G domain.

Many pathogens present highly variable surface proteins to their host as a means of evading immune responses. The structure of a peptide antigen corresponding to the subtype P1.7 variant of the porin PorA from the human pathogen Neisseria meningitidis was determined by solution of the X-ray crystal structure of the ternary complex of the peptide (ANGGASGQVK) in complex with a Fab fragment and a domain from streptococcal protein G to 1.95 A resolution. The peptide adopted a beta-hairpin structure with a type I beta-turn between residues Gly4P and Gly7P, the conformation of the peptide being further stabilised by a pair of hydrogen bonds from the side-chain of Asn2P to main-chain atoms in Val9P. The antigen binding site within the Fab formed a distinct crevice lined by a high proportion of apolar amino acids. Recognition was supplemented by hydrogen bonds from heavy chain residues Thr50H, Asp95H, Leu97H and Tyr100H to main-chain and side-chain atoms in the peptide. Complementarity-determining region (CDR) 3 of the heavy chain was responsible for approximately 50 % of the buried surface area formed by peptide-Fab binding, with the remainder made up from CDRs 1 and 3 of the light chain and CDRs 1 and 2 of the heavy chain. Knowledge of the structures of variable surface antigens such as PorA is an essential prerequisite to a molecular understanding of antigenic variation and its implications for vaccine design.     

Structure of Fab fragment of malaria transmission blocking antibody 2A8 against P. vivax P25 protein

Understanding the structural basis of recognition between antigen and antibody requires the structural comparison of free and complexed components. Previously, we have reported the crystal structure of the complex between Fab fragment of murine monoclonal antibody 2A8 (Fab2A8) and Plasmodium vivax P25 protein (Pvs25) at 3.2 Å resolution. We report here the crystallization and X-ray structure of native Fab2A8 at 4.0 Å resolution. The 2A8 antibody generated against Pvs25 prevents the formation of P. vivax oocysts in the mosquito, when assayed in membrane feeding experiment.Comparison of native Fab2A8 structure with antigen bound Fab2A8 structure indicates the significant conformational changes in CDR-H1 and CDR-H3 regions of V_H domain and CDR-L3 region of V_L domain of Fab2A8. Upon complex formation, the relative orientation between V_L and V_H domains of Fab2A8 is conserved, while significant differences are observed in elbow angles of heavy and light chains. The combing site residues of complexed Fab2A8 exhibited the reduced temperature factor compared to native Fab2A8, suggesting a loss of conformational entropy upon antigen binding.     

Bacterial expression and purification of the Fab fragment of a monoclonal antibody specific for the low-density lipoprotein receptor-binding site of human apolipoprotein E.

We report the bacterial expression and the purification of a monoclonal antibody (mAb) specific for an epitope that coincides with the LDL receptor (LDLr)-binding domain of human apolipoprotein E (apoE). This antibody resembles the LDLr in its primary structure and its specificity for apoE variants. The recombinant Fab (rFab) fragment of mAb 2E8, consisting of the entire light chain and the Fd portion of the heavy chain, was expressed in Escherichia coli and purified to homogeneity. Purification was facilitated by including a five-histidine carboxyl-terminal extension on the Fd chain. A 5- to 10-fold difference in yield of the antibody was observed when the plasmid was expressed in two different strains of E. coli. Typically 2-6 mg of rFab per liter of culture medium was recovered in the periplasm of the TG1 strain and less than 1 mg was recovered in the periplasm of the XL1-Blue strain. Culture temperatures above 35 degrees C or inclusion of sucrose in the medium reduced rFab yields. The 2E8 rFab was indistinguishable from Fab prepared from 2E8 hybridoma-generated IgG with respect to its affinity and fine specificity. We are using this system to express a panel of 2E8 variant Fabs that will be used as probes to establish the structural features responsible for the binding of apoE to the LDLr.     

Fabs specific for 8-oxoguanine: control of DNA binding.

Free radicals produce a broad spectrum of DNA base modifications including 7,8-dihydro-8-oxoguanine (8-oxoG). Since free radicals have been implicated in many pathologies and in aging, 8-oxoG has become a benchmark for factors that influence free radical production. Fab g37 is a monoclonal antibody that was isolated by phage display in an effort to create a reagent for detecting 8-oxoG in DNA. Although this antibody exhibited a high degree of specificity for the 8-oxoG base, it did not appear to recognize 8-oxoG when present in DNA. Fab g37 was modified using HCDR1 and HCDR2 segment shuffling and light chain shuffling. Fab 166 and Fab 366 which bound to 8-oxoG in single-stranded DNA were isolated. Fab 166 binds more selectively to single-stranded oligonucleotides containing 8-oxoG versus control oligonucleotides than does Fab 366 which binds DNA with reduced dependency on 8-oxoG. Numerous other clones were also isolated and characterized that contained a spectrum of specificities for 8-oxoG and for DNA. Analysis of the primary sequences of these clones and comparison with their binding properties suggested the importance of different complementarity determining regions and residues in determining the observed binding phenotypes. Subsequent chain shuffling experiments demonstrated that mutation of SerH53 to ArgH53 in the Fab g37 heavy chain slightly decreased the Fab's affinity for 8-oxoG but significantly improved its binding to DNA in an 8-oxoG-dependent manner. The light chain shuffling experiments also demonstrated that numerous promiscuous light chains could enhance DNA binding when paired with either the Fab g37 or Fab 166 heavy chains; however, only the Fab 166 light chain did so in an additive manner when combined with the Fab 166 heavy chain that contains ArgH53. A three-point model for Fab 166 binding to oligonucleotides containing 8-oxoG is proposed. We describe a successful attempt to generate a desired antibody specificity, which was not present in the animal's original immune response.     

Structural insights into steroid hormone binding: the crystal structure of a recombinant anti-testosterone Fab fragment in free and testosterone-bound forms.

The monoclonal anti-testosterone antibody (3-C(4)F(5)) has a relatively high affinity (3 x 10(8) m(-1)) with an overall good specificity profile. However, the earlier characterized binding properties have shown that both the affinity and specificity of this antibody must be improved if it is intended for use in clinical immunoassays. In this paper, the crystal structures of the recombinant anti-testosterone (3-C(4)F(5)) Fab fragment have been determined in the testosterone-bound and free form at resolutions of 2.60 and 2.72 A, respectively. The high affinity binding of the (3-C(4)F(5)) Fab is mainly determined by shape complementarity between the protein and testosterone. Only one direct hydrogen bond is formed between the hydroxyl group of the testosterone D-ring and the main-chain oxygen of Gly100(J)H. The testosterone is deeply bound in a hydrophobic pocket, and the close shape complementarity is mainly formed by the third complementarity-determining regions (CDR) of the heavy and light chain. Comparison of the bound structure with the free structure indicates conformational changes in the protein upon testosterone binding. The conformational changes of the side chains of two residues Glu95H and Tyr99H in the CDR-H3 are particularly essential for the binding. Interesting similarities in the binding of different steroids were also observed upon comparison of the available structures of anti-steroid antibodies.     

Crystal structure of a chimeric Fab' fragment of an antibody binding tumour cells.

The crystal structure of a chimeric Fab' fragment of a monoclonal antibody is presented. The Fab' comprises the murine light chain and heavy chain variable domains of the carcinoma-binding antibody B72.3 fused to the constant domain of human kappa, and the first constant domain and hinge domain of human gamma 4, respectively. A model for the Fab' has been determined by molecular replacement and refined to a resolution of 3.1 A with an R-factor of 17.6%. The additional residues that distinguish a Fab' from a Fab fragment are seen to be disordered in the crystals. The H3 hypervariable loop is short and adopts a sharp hairpin turn in a conformation that results from an interaction between the lysine side-chain of H93 and the main-chain carbonyl group of H96. The remaining hypervariable loops display conformations similar to those predicted from the canonical structures approach, although loop H2 is apparently displaced by a salt-bridge formed between H55 Asp and the neighbouring H73 Lys. These and other features of the structure likely to be important in grafting the hypervariable loops to an otherwise human framework are discussed.     

Crystal structure of the HIV-2 neutralizing Fab fragment 7C8 with high specificity to the V3 region of gp125

7C8 is a mouse monoclonal antibody specific for the third hypervariable region (V3) of the human immunodeficiency virus type 2 (HIV-2)-associated protein gp125. The three-dimensional crystal structure of the Fab fragment of 7C8, determined to 2.7 Å resolution, reveals a deep and narrow antigen-binding cleft with architecture appropriate for an elongated epitope. The highly hydrophobic cleft is bordered on one side by the negatively charged second complementarity determining region (CDR2) and the unusually long positively charged CDR3 of the heavy chain and, on the other side, by the CDR1 of the light chain. Analysis of 7C8 in complex with molecular models of monomeric and trimeric gp125 highlights the importance of a conserved stretch of residues FHSQ that is localized centrally on the V3 region of gp125. Furthermore, modeling also indicates that the Fab fragment neutralizes the virus by sterically impairing subsequent engagement of the gp125 trimer with the co-receptor on the target cell.     

A fully synthetic human Fab antibody library based on fixed VH/VL framework pairings with favorable biophysical properties

This report describes the design, generation and testing of Ylanthia, a fully synthetic human Fab antibody library with 1.3E+11 clones. Ylanthia comprises 36 fixed immunoglobulin (Ig) variable heavy (VH)/variable light (VL) chain pairs, which cover a broad range of canonical complementarity-determining region (CDR) structures. The variable Ig heavy and Ig light (VH/VL) chain pairs were selected for biophysical characteristics favorable to manufacturing and development. The selection process included multiple parameters, e.g., assessment of protein expression yield, thermal stability and aggregation propensity in fragment antigen binding (Fab) and IgG1 formats, and relative Fab display rate on phage. The framework regions are fixed and the diversified CDRs were designed based on a systematic analysis of a large set of rearranged human antibody sequences. Care was taken to minimize the occurrence of potential posttranslational modification sites within the CDRs. Phage selection was performed against various antigens and unique antibodies with excellent biophysical properties were isolated. Our results confirm that quality can be built into an antibody library by prudent selection of unmodified, fully human VH/VL pairs as scaffolds.     

Identification of chimpanzee Fab fragments by repertoire cloning and production of a full-length humanized immunoglobulin G1 antibody that is highly efficient for neutralization of dengue type 4 virus

A safe and effective dengue vaccine is still not available. Passive immunization with monoclonal antibodies from humans or nonhuman primates represents an attractive alternative for the prevention of dengue virus infection. Fab monoclonal antibodies to dengue type 4 virus (DENV-4) were recovered by repertoire cloning of bone marrow mRNAs from an immune chimpanzee and analyzed for antigen binding specificity, V(H) and V(L) sequences, and neutralizing activity against DENV-4 in vitro. Fabs 5A7, 3C1, 3E4, and 7G4 were isolated from a library constructed from a chimpanzee following intrahepatic transfection with infectious DENV-4 RNA. Fabs 5H2 and 5D9, which had nearly identical V(H) sequences but varied in their V(L) sequences, were recovered from a library constructed from the same chimpanzee after superinfection with a mixture of DENV-1, DENV-2, and DENV-3. In radioimmunoprecipitation, Fab 5A7 precipitated only DENV-4 prM, and Fabs 3E4, 7G4, 5D9, and 5H2 precipitated DENV-4 E but little or no prM. Fab 3E4 and Fab 7G4 competed with each other for binding to DENV-4 in an enzyme-linked immunosorbent assay, as did Fab 3C1 and Fab 5A7. Fab 5H2 recognized an epitope on DENV-4 that was separate from the epitope(s) recognized by other Fabs. Both Fab 5H2 and Fab 5D9 neutralized DENV-4 efficiently with a titer of 0.24 to 0.58 micro g/ml by plaque reduction neutralization test (PRNT), whereas DENV-4-neutralizing activity of other Fabs was low or not detected. Fab 5H2 was converted to full-length immunoglobulin G1 (IgG1) by combining it with human sequences. The humanized chimpanzee antibody IgG1 5H2 produced in CHO cells neutralized DENV-4 strains from different geographical origins at a similar 50% plaque reduction (PRNT(50)) titer of 0.03 to 0.05 micro g/ml. The DENV-4 binding affinities were 0.42 nM for Fab 5H2 and 0.24 nM for full-length IgG1 5H2. Monoclonal antibody IgG1 5H2 may prove valuable for passive immunoprophylaxis against dengue virus in humans.     

Comparison of two forms of catalytic antibody displayed on yeast-cell surface

Two forms of the Fab fragment of the catalytic antibody 6D9 were individually displayed on yeast-cell surface in fusion to the C-terminal half of -agglutinin: one was 6D9 Fab1, in which the light chain of the Fab (Lc) fragment is displayed on cell surface and the heavy chain of the Fab (Fd) fragment is secreted and linked to the Lc fragment with a disulfide bond; the other was 6D9 Fab2, in which the Fd fragment is displayed on cell surface and the Lc fragment is secreted and linked to the Fd fragment with a disulfide bond. Analysis by flow cytometry indicated that some 6D9 Fab2 fragments were unable to construct an appropriate conformation, and that most of the 6D9 Fab1 fragments displayed on yeast-cell surface exhibited higher binding affinity, stability, and catalytic activity. Conformation of the surface-displayed hetero-dimeric Fab fragment mainly depended on the intermolecular disulfide bond between the Lc and Fd fragments. The conformation of 6D9 Fab1 was more stable than that of Fab2. In the reducing environment of solution containing 25 nM DTT, the function of 6D9 Fab2 was almost completely lost. The successful display of 6D9 Fab1 on yeast-cell surface provides a novel approach to the engineering of catalytic antibodies.     

抗破伤风类毒素单抗可变区基因的克隆及在大肠杆菌中表达的三种工程抗体

我们采用RT-PCR,从小鼠杂交瘤细胞中扩增并克隆了抗破伤风类毒素(TT)抗体轻、重链可变区,重链Fd区基因,测定了其VH、Vk序列。并在大肠杆菌中表达了Fd片段,ELISA分析的结果表明Fd片段具有抗原结合的能力,但特异性很差。进一步采用SOE,和PCR技术,将VH、VK基因与ScFv连接片段组装成单链抗体(ScFv)基因片段,以及将人重链CH1和Fab基因连接片段组装成Fab基因片段。将它们分别插入含噬菌体fd外壳蛋白3基因的phagem-id pHEN 1中,在辅助噬菌体M 13-VCS作用下,噬菌体表面表达了抗TT的噬菌体单链抗体(phage-ScFv)与噬菌体Fab(phage-Fab),经ELISA检测,表明它们都能与TT特异结合。