Long-term release of clodronate from biodegradable microspheres

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions. Published: July 11, 2001.     

A novelin vitro release technique for peptide-containing biodegradable microspheres

The purpose of this study was to develop and evaluate a dialysisin vitro release technique for peptide-containing poly(d, 1-lactide-coglycolide) (PLGA) microspheres (ms) that would correlate within vitro data. Using a luteinizing hormone- releasing hormone analogue (LHRH), Orntide acetate, solubility and stability were determined in 0.1 M phosphate buffer (PB), pH 7.4, and in 0.1 M acetate buffer (AB), pH 4.0, with highperformance liquid chromotography (HPLC), and peptide permeability through a dialysis membrane (molecular weight cut-off 300,000) was determined. Orntide ms were prepared by a dispersion/solvent extraction/evaporation method and characterized for drug content (HPLC), particle size distribution (laser diffraction method), and surface morphology (scanning electron microscopy).In vitro release was studied in PB using a conventional extraction method and with a new dialysis method in AB. Gravimetric analyses of polymer mass loss and matrix hydration, and peptide adsorption to blank PLGA ms (50∶50, M_w 28 022) were carried out in PB and AB upon incubation at 37°C. Serum Orntide and testosterone levels in rats after administration of Orntide ms were determined by radioimmunoassay. Orntide acetate solubility was influenced by pH; approximately 2.3 mg/mL dissolved in PB and >18 mg/mL in AB. Stability was pH- and temperature-dependent. The peptide was very stable at pH 4.0, 4°C, but degraded rapidly at pH 7.4,37°C. Peptide permeability through the dialysis membrane was accelerated by agitation and>95% equilibrium was reached within 48 hours. The overall release rate was higher with the dialysis method. Mass loss of the Orntide ms was faster in AB (50% loss in 3 weeks: 95% in 35 days) than in PB (65% in 35 days). In contrast, hydration after 35 days was 4-fold higher in PB. The nonspecific adsorption to blank ms was greater in PB (128 μ g Orntide/10 mg PLGA) compared with AB (<5 μ g Orntide/10 mg PLGA). Administration of 30-day Orntide PLGA ms to rats resulted in an initial serum Orntide level of 21 ng/mL after 6 hours and a C_max of 87 ng/mL after 6 days. Testesterone levels were suppressed immediately after ms administration (3 mg Orntide/Kg) from 5.2 ng/mL to 0.3 ng/mL (after 24 hours) and remained suppressed for 38 days. Orntide acetate solubility and degradation kinetics were markedly influenced by pH of the buffer systems and mass loss; matrix hydration, as well as the nonspecific adsorption to blank ms, was pH-dependent. Thein vitro release profile obtained with the dialysis method in AB correlated well with thein vivo data, therepy providing a more reliable prediction ofin vivo performance.     

Development of a dialysis in vitro release method for biodegradable microspheres

The purpose of this research was to develop a simple and convenient in vitro release method for biodegradable microspheres using a commercially available dialyzer. A 25 KD MWCO Float-a-Lyzer was used to evaluate peptide diffusion at 37°C and 55°C in different buffers and assess the effect of peptide concentration. In vitro release of Leuprolide from PLGA microspheres, having a 1-month duration of action, was assessed using the dialyzer and compared with the commonly used “sample and separate” method with and without agitation. Peptide diffusion through the dialysis membrane was rapid at 37°C and 55°C in all buffers and was independent of peptide concentration. There was no detectable binding to the membrane under the conditions of the study. In vitro release of Leuprolide from PLGA microspheres was tri-phasic and was complete in 28 days with the dialysis technique. With the sample and separate technique, linear release profiles were obtained with complete release occurring under conditions of agitation. Diffusion through the dialysis membrane was sufficiently rapid to qualify the Float-a-Lyzer for an in vitro release system for microparticulate dosage forms. Membrane characteristics render it useful to study drug release under real-time and accelerated conditions. Published: October 6, 2005     

A model-dependent approach to correlate accelerated with real-time release from biodegradable microspheres

The purpose of this study was to determine the feasibility of applying accelerated in vitro release testing to correlate or predict long-term in vitro release of leuprolide poly(lactideco-glycolide) microspheres. Peptide release was studied using a dialysis technique at 37°C and at elevated temperatures (50°C–60°C) in 0.1 M phosphate buffered saline (PBS) pH 7.4 and 0.1 M acetate buffer pH 4.0. The data were analyzed using a modification, of the Weibull equation. Peptide release was temperature dependent and complete within 30 days at 37°C and 3 to 5 days at the elevated temperatures. In vitro release profiles at the elevated temperatures correlated well with release at 37°C. The shapes of the release profiles at all temperatures were similar. Using the modified Weibull equation, an increase in temperature was characterized by an increase in the model parameter, α, a scaling factor for the apparent rate constant. Complete release at 37°C was shortened from ∼30 days to 5 days at 50°C, 3.5 days at 55°C, 2.25 days at 60°C in PBS pH 7.4, and 3 days at 50°C in acetate buffer pH 4.0. Values for the model parameter β indicated that the shape of the release profiles at 55°C in PBS pH 7.4 (2.740) and 50°C in 0.1 M acetate buffer pH 4.0 (2.711) were similar to that at 37°C (2.577). The E_a for hydration and erosion were determined to be 42.3 and 19.4 kcal/mol, respectively. Polymer degradation was also temperature dependent and had an E_a of 31.6 kcal/mol. Short-term in vitro release studies offer the possibility of correlation with long-term release, thereby reducing the time and expense associated with longterm studies. Accelerated release methodology could be useful in the prediction of long-term release from extended release microsphere dosage forms and may serve as a quality control tool for the release of clinical or commercial batches. Selected for the 2005 AAPS Outstanding Graduate Student Research Award in Pharmaceutical Technologies Sponsored by Solvay Pharmaceuticals.     

Lysozyme microencapsulation within biodegradable PLGA microspheres: urea effect on protein release and stability

Lysozyme was encapsulated within biodegradable poly(D, L-lactide-co-glycolide) microspheres by a double emulsion solvent evaporation method for studying its release mechanism associated with protein stability problems. When urea, a protein unfolding agent, was added into the incubation medium lysozyme release rate from the microspheres increased with the increase in urea concentration. The enhanced lysozyme release was attributed to the suppression of protein aggregation, to the facilitated diffusion of unfolded lysozyme by an efficient reptile motion of unfolded protein molecules through porous channels in microspheres, and to the largely decreased extent of nonspecific protein adsorption onto the enlarged surface area of degrading polymer microspheres in the presence of urea. Encapsulating lysozyme in an unfolded form within PLGA microspheres was attempted by using urea as an excipient. This new urea-based formulation exhibited a more sustained lysozyme release profile than the control formulation, and released lysozyme from the microspheres showed a much less amount of lysozyme dimer population while maintaining a correct conformation after refolding in the incubation medium. This study provides new insights for the formulation of protein encapsulated PLGA microspheres.     

Cytokine immunotherapy of cancer with controlled release biodegradable microspheres in a human tumor xenograft/SCID mouse model

 A novel biodegradable poly(lactic acid) microsphere formulation was evaluated for in vivo cytokine immunotherapy of cancer in a human tumor xenograft/severe combined immunodeficiency (SCID) mouse model. Co-injection of interleukin-2 (IL-2)-loaded microspheres with tumor cells into a subcutaneous site resulted in the complete suppression of tumor engraftment in 80% of animals. In contrast, bovine-serum-albumin(BSA)-loaded particles or bolus injections of poly(ethylene glycol)/IL-2 were ineffective in preventing tumor growth. The antitumor effect of IL-2 released by the microspheres was shown to be mediated by the mouse natural killer cells. This is the first evidence that the rejection of human tumor xenografts can be provoked by the sustained in vivo delivery of IL-2 from biodegradable microspheres. The use of poly(lactic acid) microspheres to deliver cytokines to the tumor environment could provide a safer and simpler alternative to gene therapy protocols in the treatment of cancer. Received: 9 September 1997 / Accepted: 30 October 1997     

Microencapsulation of human growth hormone within biodegradable polyester microspheres: protein aggregation stability and incomplete release mechanism.

Recombinant human growth hormone (rhGH) was encapsulated within poly(D,L-lactic-co-glycolic acid) microspheres by a double emulsion solvent evaporation method. A mixture of methylene chloride and ethyl acetate in varying volume ratios was used for the microsphere preparation. Protein release profiles from three different microsphere formulations demonstrated initial burst effects ranging from 28.2% to 54.7% after a 1-day incubation and exhibited no further significant releases up to 19 days. This was because the encapsulated rhGH with the microspheres was largely aggregated in a noncovalent fashion during the formulation. Nonaggregated water soluble rhGH species within the microspheres are likely to be responsible for the rapid release upon incubation. The initially released rhGH in the incubation medium, however, was composed of mostly monomer species with a small amount of dimer as probed by size-exclusion chromatography. Circular dichroism spectra of the initially released rhGH in the medium revealed that the conformation of the released rhGH was correctly folded relative to that of native rhGH, with little variation in alpha-helix contents depending on the formulations. The "nonrelease" mechanism after the initial burst release was attributed to nonspontaneously dissociable noncovalent protein aggregation and surface adsorption of rhGH present within the microspheres.     

Preparation of biodegradable microspheres and matrix devices containing naltrexone

In this study, the use of biodegradable polymers for microencapsulation of naltrexone using solvent evaporation technique is investigated. The use of naltrexone microspheres for the preparation of matrix devices is also studied. For this purpose, poly(L-lactide) (PLA) microspheres containing naltrexone prepared by solvent evaporation technique were compressed at temperatures above the Tg of the polymer. The effect of different process parameters, such as drug/polymer ratio and stirring rate during preparation of microspheres, on the morphology, size distribution, and in vitro drug release of microspheres was studied. As expected, stirring rate influenced particle size distribution of microspheres and hence drug release profiles. By increasing the stirring speed from 400 to 1200 rpm, the mean diameter of microspheres decreased from 251 μm to 104 μm. The drug release rate from smaller microspheres was faster than from larger microspheres. However, drug release from microspheres with low drug content (20% wt/wt) was not affected by the particle size of microspheres. Increasing the drug content of microspheres from 20% to 50% wt/wt led to significantly faster drug release from microspheres. It was also shown that drug release from matrix devices prepared by compression of naltrexone microspheres is much slower than that of microspheres. No burst release was observed with matrix devices. Applying higher compression force, when compressing microspheres to produce tablets, resulted in lower drug release from matrix devices. The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a PLA microparticulate system or matrix devices.     

Prolonged release biodegradable vesicular carriers for rifampicin--formulation and kinetics of release

An attempt has been made to design suitable liposome and niosome-encapsulated drug delivery system for rifampicin and evaluated the same in vitro and in vivo. A modified lipid layer hydration method was employed to prepare these vesicular carriers. The formulated systems were characterized in vitro for size distribution analysis, drug entrapment, drug release profiles and vesicular stability at different conditions of storage. In vivo drug kinetics was evaluated in normal, healthy albino rats for niosomal formulation upon subcutaneous injection and various pharmacokinetic parameters were determined. Niosomes and liposomes exhibited mean diameter of 9.73 and 11.87 microns with entrapment efficiencies of 30.5 and 34.2% respectively. Both the products exhibited sustained release characteristics in vitro with zero order drug release kinetics up to initial 10 hr. Stability evaluation indicated that both formulations were not significantly leaky over a period of one month. Niosomal formulation elevated plasma elimination half life and decreased elimination rate constants for rifampicin in vivo suggested that encapsulation retarded the removal of the drug from circulation compared to free drug due to slow drug release into systemic circulation. A five-fold increase in the area under plasma rifampicin concentration-time curve for niosomal rifampicin as compared to free drug indicated better bioavailability of encapsulated drug. It is evident from this study that niosomes and liposomes could be promising delivery systems for rifampicin with prolonged drug release profiles and reasonably good stability characteristics.     

Process and formulation variables in the preparation of injectable and biodegradable magnetic microspheres

The aim of this study was to prepare biodegradable sustained release magnetite microspheres sized between 1 to 2 μm. The microspheres with or without magnetic materials were prepared by a W/O/W double emulsion solvent evaporation technique using poly(lactide-co-glycolide) (PLGA) as the biodegradable matrix forming polymer. Effects of manufacturing and formulation variables on particle size were investigated with non-magnetic microspheres. Microsphere size could be controlled by modification of homogenization speed, PLGA concentration in the oil phase, oil phase volume, solvent composition, and polyvinyl alcohol (PVA) concentration in the outer water phase. Most influential were the agitation velocity and all parameters that influence the kinematic viscosity of oil and outer water phase, specifically the type and concentration of the oil phase. The magnetic component yielding homogeneous magnetic microspheres consisted of magnetite nanoparticles of 8 nm diameter stabilized with a polyethylene glycole/polyacrylic acid (PEG/PAA) coating and a saturation magnetization of 47.8 emu/g. Non-magnetic and magnetic microspheres had very similar size, morphology, and size distribution, as shown by scanning electron microscopy. The optimized conditions yielded microspheres with 13.7 weight% of magnetite and an average diameter of 1.37 μm. Such biodegradable magnetic microspheres seem appropriate for vascular administration followed by magnetic drug targeting.     

Limited adhesion of biodegradable microspheres to E- and P-selectin under flow

In a variety of disease settings the expression of the endothelial selectins E- and P-selectin appears to be increased. This feature makes these molecules attractive targets around which to design directed drug-delivery schemes. One possible approach for achieving such delivery is to use polymeric biodegradable microspheres bearing a humanized monoclonal antibody (MAb) for E- and P-selectin, MAb HuEP5C7.g2. Perhaps the simplest technique for "coupling" HuEP5C7.g2 to the microspheres is via nonspecific adsorption. Previous studies suggest, however, that the adsorption of proteins onto microspheres fabricated in the presence of a stabilizer such as poly(vinyl alcohol) (PVA) is limited. It is unclear to what extent this limited level of adsorbed HuEP5C7.g2 would be able to support adhesion to E- and P-selectin under flow conditions. To explore this issue, we prepared microspheres from the biodegradable polymer, poly(epsilon-caprolactone) (PCL), using a single emulsion process and PVA as a stabilizer. We then incubated the PCL microspheres with HuEP5C7.g2 and studied the adhesion of the resulting HuEP5C7.g2 microspheres to E- and P-selectin under in vitro flow conditions. We found that the HuEP5C7.g2 PCL microspheres exhibit specific adhesion to Chinese hamster ovary cells stably expressing P-selectin (CHO-P) and 4-h IL-1beta-activated human umbilical vein endothelial cells (HUVEC). In contrast, HuEP5C7.g2 PCL microspheres exhibit little adhesion to parental CHO cells or unactivated HUVEC. The attachment efficiency to the selectin substrates was quite low, with appreciable attachment occurring only at low shear (0.3 dyn/cm(2)). Other supporting data strongly suggest that the limited attachment efficiency is due to a low level of HuEP5C7.g2 adsorbed to the PCL microspheres. Although the attachment was limited, a significant percentage of the HuEP5C7.g2 PCL microspheres were able to remain adherent at relatively high shear (8 dyn/cm(2)). Combined, our data suggest that HuEP5C7.g2 PCL microspheres exhibit selective limited adhesion to cellular substrate expressing E- and P-selectin.     

Progesterone and estradiol in biodegradable microspheres for control of estrus and ovulation in mares

Progesterone and estradiol 17-beta in poly (DL-lactide) microspheres were used to control estrus and ovulation in mares after luteolysis was induced by prostaglandin F(2)infinity. Mares were given a single intramuscular injection of biodegradable poly (DL-lactide) microspheres, 1 day following prostaglandin treatment, containing no hormones (control), 0.625 g progesterone and 50 mg estradiol (low dose), 1.25 g progesterone and 100 mg estradiol (medium dose), or 1.875 g progesterone and 150 mg estradiol (high dose; n=15 mares per group). Mares treated with the low dose had significantly longer intervals (P<0.05) to estrus and ovulation than the control mares; however, low dose mares had shorter intervals (P<0.05) to estrus than high dose mares and shorter intervals to ovulation than medium and high dose mares. Regression analysis indicated that the medium dose was sufficient for maximizing interval to ovulation while the high dose maximized interval to estrus. All groups of mares exhibited similar (P>0.05) post-treatment estrus lengths. A clinical response scoring system based on synchrony of both estrus and ovulation within a treatment group was also used to measure the effectiveness of treatments on control of estrus and ovulation. Clinical response scores did not differ (P>0.05) among treatment groups. Mares were randomly assigned for insemination at the beginning of the first post-treatment estrus. Rates for embryo recovery performed by uterine lavage 7 days post-ovulation did not differ (P>0.05) among groups. Concentrations of serum progesterone increased in mares receiving progesterone and estradiol microspheres. At 10 to 14 days post-injection of microspheres, progesterone concentrations were higher (P<0.05) and remained above 1 ng/ml in the mares receiving the high dose. Progesterone concentrations were also higher (P<0.05) on Days -3 to -1 (Day 0 = day of post-treatment ovulation) in mares receiving the high dose when compared to control mares. Gonadotropin concentrations were suppressed (P<0.05) in the medium and high dose groups.     

Energy metabolism and re-establishment of intercellularadhesion complexes of gel entrapped hepatocytes

We studied the effect of continuous medium flow on the viabilityand structural organization of hepatocytes high density entrapped inalginate gel beads in the first few hours after isolation.The metabolic energy status of the entrapped cells, monitored invivo by ³¹P NMR spectroscopy, was stable during theexperimental time and a physiological redox ratio was reachedafter the first three hours of culture. The morphologicalanalysis revealed that the entrapped hepatocytes placed in a fixed-bed bioreactor under continuous flow showed a polyhedricalshape with numerous microvilli on cell surface and reconstitutedtight junctions as well as bile canalicular structures, closelyresembling those present in the liver.These results suggest that continuous flow allows the culture ofhepatocytes at very high cell density within a matrix withoutloss of viability and accelerates cellular tissue reconstructionat very short times after isolation. This type of culture couldrepresent a very useful model for physiological andtoxicological studies as well as a promising approach toward thedevelopment of a bioartificial hybrid support device in acuteliver failure.     

In vitro and in vivo activities of leukotriene B4-loaded biodegradable microspheres

Leukotriene B(4) (LTB(4)) is a potent inflammatory mediator and stimulates the immune response. In addition, LTB(4) promotes leukocyte functions such as phagocytosis, chemotaxis and chemokinesis of polymorphonuclear leukocytes, as well as modulates cytokine release. However, some physicochemical characteristics of leukotrienes, such as poor solubility in water and chemical instability, make them difficult to administer in vivo. The aim of this study was to develop LTB(4)-loaded microspheres (MS) that prolong and sustain the in vivo release of this mediator. An oil-in-water emulsion solvent extraction-evaporation method was chosen to prepare the lipid-loaded MS. We determined their diameters, evaluated the in vitro release of LTB(4), using enzyme immunoassay and evaluated in vitro MS uptake by peritoneal macrophages. To assess the preservation of neutrophil chemoattractant activity, LTB(4)-loaded MS were tested in vitro (in a modified Boyden microchamber) and in vivo, after intratracheal administration.     

Scanning and transmission electron microscopy of biodegradable microspheres (DSM) in blood vessels

A type of biodegradable microsphere (DSM), approximately 45 microns in diameter, made of polymerized potato starch (Pharmacia, Sweden) was intravenously injected into rats to observe the state of DSM in small blood vessels in the kidney and liver at the electron microscopic level. Prior to their digestion with amylase, individual DSM changed their round shape to an irregularly folded one to occupy almost the whole area of the lumen. At the transmission electron microscopic level, DSM were impregnated with colloidal iron and were easily identified. Interaction of the iron labelled DSM with the surface of endothelial cells was unexpectedly loose and no adherence or fusion of this surface was observed. The starch substance was not visible in the pinocytotic vesicles of the endothelium. These findings suggest the independent profile of DSM in situ.     

Adaptor protein complexes and intracellular transport

The AP (adaptor protein) complexes are heterotetrameric protein complexes that mediate intracellular membrane trafficking along endocytic and secretory transport pathways. There are five different AP complexes: AP-1, AP-2 and AP-3 are clathrin-associated complexes; whereas AP-4 and AP-5 are not. These five AP complexes localize to different intracellular compartments and mediate membrane trafficking in distinct pathways. They recognize and concentrate cargo proteins into vesicular carriers that mediate transport from a donor membrane to a target organellar membrane. AP complexes play important roles in maintaining the normal physiological function of eukaryotic cells. Dysfunction of AP complexes has been implicated in a variety of inherited disorders, including: MEDNIK (mental retardation, enteropathy, deafness, peripheral neuropathy, ichthyosis and keratodermia) syndrome, Fried syndrome, HPS (Hermansky–Pudlak syndrome) and HSP (hereditary spastic paraplegia).     

Inositol polyphosphates and intracellular calcium release

The hydrolysis of inositol lipids triggered by the occupation of cell surface receptors generates several intracellular messengers. Many different inositol phosphate isomers accumulate in stimulated cells. Of these D-myo-inositol 1,4,5-trisphosphate (Ins 1,4,5-P3) is responsible for discharging Ca2+ from intracellular stores. Specific membrane binding sites for Ins 1,4,5-P3 have been detected. The properties of these sites and their possible relationship to the calcium release process is reviewed. Ins 1,4,5-P3 binding sites may be present in discrete subcellular structures ("calciosomes"). Kinetic and some electrophysiological evidence indicates that Ins 1,4,5-P3 acts to open a Ca2+ channel. Recent progress on the purification of the receptor from neuronal tissues is summarized. Phosphorylation of Ins 1,4,5-P3 by a specific kinase results in the production of D-myo-inositol 1,3,4,5-tetraphosphate (Ins 1,3,4,5-P4). This inositol phosphate has been reported to increase the entry of Ca2+ across the plasma membrane, activate nonspecific ion channels in the plasma membrane, alter the Ca2+ content of the Ins 1,4,5-P3-releasable store, and bind to and alter the activity of certain enzymes. These data and the possible biological significance of Ins 1,3,4,5-P4 are discussed.     

Synthesis of biodegradable poly-epsilon-caprolactone microspheres by dispersion ring-opening polymerization in supercritical carbon dioxide

A series of fluorinated diblock and triblock copolymers of poly(epsilon-caprolactone) and poly(heptadecafluorodecylacrylate) were prepared by combining ring-opening polymerization of epsilon-CL and atom transfer radical polymerization of the acrylate. These copolymers with well-controlled molecular weight and composition were characterized by (1)H NMR spectroscopy and used as stabilizers for the dispersion ring-opening polymerization of epsilon-CL in supercritical carbon dioxide. The effect of composition and architecture of the polymeric stabilizers on the stabilization of PCL microspheres was investigated. Finally, purification of PCL was successfully implemented by reactive supercritical fluid extraction of the tin catalyst.     

Sustained release of proteins from electrospun biodegradable fibers

Electrospinning is a simple and versatile technique of producing polymeric fibers ranging from submicron to micron in diameter. Incorporation of bioactive agents into the fibers could make a biofunctional tissue engineering scaffold. In this study, we investigated the feasibility of encapsulating human beta-nerve growth factor (NGF), which was stabilized in a carrier protein, bovine serum albumin (BSA) in a copolymer of epsilon-caprolactone and ethyl ethylene phosphate (PCLEEP) by electrospinning. Partially aligned protein encapsulated fibers were obtained and the protein was found to be randomly dispersed throughout the electrospun fibrous mesh in aggregate form. A sustained release of NGF via diffusion process was obtained for at least 3 months. PC12 neurite outgrowth assay confirmed that the bioactivity of electrospun NGF was retained, at least partially, throughout the period of sustained release, thus clearly demonstrating the feasibility of encapsulating proteins via electrospinning to produce biofunctional tissue scaffolds.