Comparison of the Sequence-Dependent Fluorescence of the Cyanine Dyes Cy3, Cy5, DyLight DY547 and DyLight DY647 on Single-Stranded DNA

Cyanine dyes are commonly used for fluorescent labeling of DNA and RNA oligonucleotides in applications including qPCR, sequencing, fluorescence in situ hybridization, Förster resonance energy transfer, and labeling for microarray hybridization. Previous research has shown that the fluorescence efficiency of Cy3 and Cy5, covalently attached to the 5′ end of single-stranded DNA, is strongly sequence dependent. Here, we show that DY547 and DY647, two alternative cyanine dyes that are becoming widely used for nucleic acid labeling, have a similar pattern of sequence-dependence, with adjacent purines resulting in higher intensity and adjacent cytosines resulting in lower intensity. Investigated over the range of all 1024 possible DNA 5mers, the intensities of Cy3 and Cy5 drop by ∼50% and ∼65% with respect to their maxima, respectively, whereas the intensities of DY547 and DY647 fall by ∼45% and ∼40%, respectively. The reduced magnitude of change of the fluorescence intensity of the DyLight dyes, particularly of DY647 in comparison with Cy5, suggests that these dyes are less likely to introduce sequence-dependent bias into experiments based on fluorescent labeling of nucleic acids.     

Analysis of oligonucleotide microarrays by 3' end labeling using fluorescent nucleotides and terminal transferase

A simple enzymatic labeling procedure is described to determine spot quality in oligonucleotide microarrays. By using fluorescently labeled dideoxynucleotides or ribonucleotides as substrate for terminal deoxynucleotidyl transferase (TdT), a single fluorophore can be covalently attached at the 3' end of each oligonucleotide probe molecule in the spot. Fluorescein-12-ddUTP CyTM3-ddUTP Cy5-UTP, and Cy3-UTP were compared as TdT substrates for 3' end labeling an array of 1273 hexamer probes. Cy5-UTP was found to show minimal bias toward probe base composition and is therefore well suited for quantitative analysis of microarray spots where the oligonucleotide probes are coupled via a 5' end linkage to the solid phase.     

两种标记方法对60mer寡核苷酸芯片背景信号影响的初步分析

研究两种不同的样本标记方法对人全基因组高密度60mer寡核苷酸芯片背景信号的影响。收集5对患病与健康人外周血单个核细胞,分别提取总RNA后,采用限制性显示技术（restriction display,RD）进行样本双色（Cy3/Cy5）荧光标记,与5张Agilent 60mer高密度（22K）Human 1B寡核苷酸芯片进行杂交。芯片全部杂交点分3组：基因探针组、阳性对照组和阴性对照组。阳性对照采用荧光标记寡核苷酸直接掺入法进行标记。对全部杂交信号点的Cy3和Cy5背景信号值,用SPSS软件进行数据转换、正态性检验、方差齐性检验、变异系数分析和重复数据的方差分析。数据分析结果显示,Cy3 标记的背景信号值均高于 Cy5标记的背景信号值。重复测量数据的方差分析表明,在Cy3 和Cy5标记中,两种不同标记方法间的背景信号值的差异极显著（PCy3＜0.01, PCy5＜0.01）,且RD标记点的背景信号平均值低于荧光标记寡核苷酸直接掺入标记法标记的阳性对照点。RD标记方法是一种有用的低背景信号的高密度长链寡核苷酸芯片样本标记方法。     

Synthesis and properties of fluorescent NF-kappa B-recognizing hairpin oligodeoxyribonucleotide decoys

Intramolecular fluorescence quenching of cyanine dyes was investigated using a model hairpin oligonucleotide decoy encoding a NF-kappaB p50 subunit binding site. Two types of hairpin oligonucleotides were synthesized: (1) 5'-(6-aminohexyl)- and 3'-(3-aminopropyl)-linked (I); (2) 5'-(6-aminohexyl)- and 3'-[3-(3-hydroxypropyldithio)propyl]-linked (II). Oligonucleotide I was covalently modified using monofunctional either Cy3- or Cy5.5-N-hydroxysuccinimide esters. Using reverse-phase HPLC, mono-and dicyanineamide derivatives of I were isolated. Mono-Cy3-modified derivatives of I, but not the mono-Cy5.5-modified derivatives, showed a 2-fold higher Cy3 fluorescence intensity compared to the free dye. There was no detectable difference in fluorescence between the di-Cy3 derivative of I and the free dye at the same concentration. However, there was a 4-fold quenching of fluorescence in the case of the di-Cy5.5 derivative of the same hairpin oligonucleotide. The quenching of Cy5.5 fluorescence could not be explained by the interaction of Cy5.5 with nucleotide bases as demonstrated by incubating free Cy5.5 dye with oligonuclotides. The quenching effect was further investigated using an oligonucleotide bearing a cleavable 3'-amino-terminated linker bearing an S-S bond (III). After modification of the 5'- and 3'-end of oligonucleotide III with a Cy5.5 monofunctional hydroxysuccinimide ester, a 70-75% quenching of fluorescence was observed. Fluorescence was 100% dequenched after the reduction of S-S bond. The obtained result unequivocally demonstrates that the formation of intramolecular Cy5.5 dimers is the dominant mechanism of fluorescence quenching in symmetric dye-dye hairpin decoy beacons.     

Increasing the sensitivity of DNA microarrays by metal-enhanced fluorescence using surface-bound silver nanoparticles

The effects of metal-enhanced fluorescence (MEF) have been measured for two dyes commonly used in DNA microarrays, Cy3 and Cy5. Silver island films (SIFs) grown on glass microscope slides were used as substrates for MEF DNA arrays. We examined MEF by spotting biotinylated, singly-labeled 23 bp DNAs onto avidin-coated SIF substrates. The fluorescence enhancement was found to be dependent on the DNA spotting concentration: below ~12.5 μM, MEF increased linearly, and at higher concentrations MEF remained at a constant maximum of 28-fold for Cy5 and 4-fold for Cy3, compared to avidin-coated glass substrates. Hybridization of singly-labeled oligonucleotides to arrayed single-stranded probes showed lower maximal MEF factors of 10-fold for Cy5 and 2.5-fold for Cy3, because of the smaller amount of immobilized fluorophores as a result of reduced surface hybridization efficiencies. We discuss how MEF can be used to increase the sensitivity of DNA arrays, especially for far red emitting fluorophores like Cy5, without significantly altering current microarray protocols.     

Fluorescence resonance energy transfer (FRET) and competing processes in donor-acceptor substituted DNA strands: a comparative study of ensemble and single-molecule data

We studied the fluorescence resonance energy transfer (FRET) efficiency of different donor-acceptor labeled model DNA systems in aqueous solution from ensemble measurements and at the single molecule level. The donor dyes: tetramethylrhodamine (TMR); rhodamine 6G (R6G); and a carbocyanine dye (Cy3) were covalently attached to the 5'-end of a 40-mer model oligonucleotide. The acceptor dyes, a carbocyanine dye (Cy5), and a rhodamine derivative (JA133) were attached at modified thymidine bases in the complementary DNA strand with donor-acceptor distances of 5, 15, 25 and 35 DNA-bases, respectively. Anisotropy measurements demonstrate that none of the dyes can be observed as a free rotor; especially in the 5-bp constructs the dyes exhibit relatively high anisotropy values. Nevertheless, the dyes change their conformation with respect to the oligonucleotide on a slower time scale in the millisecond range. This results in a dynamic inhomogeneous distribution of donor/acceptor (D/A) distances and orientations. FRET efficiencies have been calculated from donor and acceptor fluorescence intensity as well as from time-resolved fluorescence measurements of the donor fluorescence decay. Dependent on the D/A pair and distance, additional strong fluorescence quenching of the donor is observed, which simulates lower FRET efficiencies at short distances and higher efficiencies at longer distances. On the other hand, spFRET measurements revealed subpopulations that exhibit the expected FRET efficiency, even at short D/A distances. In addition, the measured acceptor fluorescence intensities and lifetimes also partly show fluorescence quenching effects independent of the excitation wavelength, i.e. either directly excited or via FRET. These effects strongly depend on the D/A distance and the dyes used, respectively. The obtained data demonstrate that besides dimerization at short D/A distances, an electron transfer process between the acceptor Cy5 and rhodamine donors has to be taken into account. To explain deviations from FRET theory even at larger D/A distances, we suggest that the pi-stack of the DNA double helix mediates electron transfer from the donor to the acceptor, even over distances as long as 35 base pairs. Our data show that FRET experiments at the single molecule level are rather suited to resolve fluorescent subpopulations in heterogeneous mixture, information about strongly quenched subpopulations gets lost.     

Quantitative comparison of long-wavelength Alexa Fluor dyes to Cy dyes: fluorescence of the dyes and their bioconjugates.

Amine-reactive N-hydroxysuccinimidyl esters of Alexa Fluor fluorescent dyes with principal absorption maxima at about 555 nm, 633 nm, 647 nm, 660 nm, 680 nm, 700 nm, and 750 nm were conjugated to antibodies and other selected proteins. These conjugates were compared with spectrally similar protein conjugates of the Cy3, Cy5, Cy5.5, Cy7, DY-630, DY-635, DY-680, and Atto 565 dyes. As N-hydroxysuccinimidyl ester dyes, the Alexa Fluor 555 dye was similar to the Cy3 dye, and the Alexa Fluor 647 dye was similar to the Cy5 dye with respect to absorption maxima, emission maxima, Stokes shifts, and extinction coefficients. However, both Alexa Fluor dyes were significantly more resistant to photobleaching than were their Cy dye counterparts. Absorption spectra of protein conjugates prepared from these dyes showed prominent blue-shifted shoulder peaks for conjugates of the Cy dyes but only minor shoulder peaks for conjugates of the Alexa Fluor dyes. The anomalous peaks, previously observed for protein conjugates of the Cy5 dye, are presumably due to the formation of dye aggregates. Absorption of light by the dye aggregates does not result in fluorescence, thereby diminishing the fluorescence of the conjugates. The Alexa Fluor 555 and the Alexa Fluor 647 dyes in protein conjugates exhibited significantly less of this self-quenching, and therefore the protein conjugates of Alexa Fluor dyes were significantly more fluorescent than those of the Cy dyes, especially at high degrees of labeling. The results from our flow cytometry, immunocytochemistry, and immunohistochemistry experiments demonstrate that protein-conjugated, long-wavelength Alexa Fluor dyes have advantages compared to the Cy dyes and other long-wavelength dyes in typical fluorescence-based cell labeling applications.     

Oligonucleotide Microarray with RD-PCR Labeling Technique for Detection and Typing of Human Papillomavirus

Currently, screening for high-risk human papillomavirus (HPV) infection remains an important health concern throughout the world, because of the close association between certain types of HPV and cervical cancer. In this study, we explore the possibility of using ∼70mer oligonucleotide microarray for detection and genotyping of HPV. The ∼70mer type-specific oligonucleotide probes of four different types HPV were designed by using biological software Arraydesigner 2.0, which analyzed the whole genome sequences of HPV and selected optimal probes. These probes were synthesized and printed onto the surface of glass slides in order to prepare a low-density microarray. HPV samples were labeled with fluorescence dyes Cy3 using a method of restriction display polymerase chain reaction (RD-PCR). HPV plasmid DNA was restricted with Sau3A I to produce multiple fragments that were ligated to adaptors subsequently and used as PCR template. PCR labeling was performed with the fluorescently labeled universal primer (Cy3-UP) whose sequence is designed according to the adaptor of the RD-PCR approaches. The labeled samples were hybridized with the oligonucleotide microarray. The scanning results showed that HPV DNA hybridized specifically with multiple spots correspondingly to show positive signals, whereas no signals were detected of all the negative and blank controls. These results demonstrated that ∼70mer oligonucleotide microarray can be applied to HPV detection and genotyping. The application of RD-PCR in the sample labeling can increase significantly the sensitivity of the assay and will be especially useful for the discriminate diagnosis of multiple pathogens.     

A highly fluorescent DNA toolkit: synthesis and properties of oligonucleotides containing new Cy3, Cy5 and Cy3B monomers

Cy3B is an extremely bright and stable fluorescent dye, which is only available for coupling to nucleic acids post-synthetically. This severely limits its use in the fields of genomics, biology and nanotechnology. We have optimized the synthesis of Cy3B, and for the first time produced a diverse range of Cy3B monomers for use in solid-phase oligonucleotide synthesis. This molecular toolkit includes phosphoramidite monomers with Cy3B linked to deoxyribose, to the 5-position of thymine, and to a hexynyl linker, in addition to an oligonucleotide synthesis resin in which Cy3B is linked to deoxyribose. These monomers have been used to incorporate single and multiple Cy3B units into oligonucleotides internally and at both termini. Cy3B Taqman probes, Scorpions and HyBeacons have been synthesized and used successfully in mutation detection, and a dual Cy3B Molecular Beacon was synthesized and found to be superior to the corresponding Cy3B/DABCYL Beacon. Attachment of Cy3, Cy3B and Cy5 to the 5-position of thymidine by an ethynyl linker enabled the synthesis of an oligonucleotide FRET system. The rigid linker between the dye and nucleobase minimizes dye-dye and dye-DNA interactions and reduces fluorescence quenching. These reagents open up new future applications of Cy3B, including more sensitive single-molecule and cell-imaging studies.     

Anomalous fluorescence enhancement of Cy3 and cy3.5 versus anomalous fluorescence loss of Cy5 and Cy7 upon covalent linking to IgG and noncovalent binding to avidin

This study provides a critical examination of protein labeling with Cy3, Cy5, and other Cy dyes. Two alternate situations were tested. (i) Antibodies were covalently labeled with Cy dye succinimidyl ester at various fluorophore/protein ratios and the fluorescence of the labeled antibodies was compared to that of free Cy dye. (ii) Fluorescent biotin derivatives were synthesized by derivatizing ethylenediamine with one biotin and one Cy3 (or Cy5) residue. The fluorescence properties of these biotin-Cy dye conjugates were examined at all ligand/(strept)avidin ratios (0 相似文献   

A novel fluorescence ratiometric method confirms the low solvent viscosity of the cytoplasm.

Two homologous indocyanine dyes, Cy3.18 and Cy5.18, can be used as a ratio pair for fluorometric determination of solvent viscosity. Succinimidyl ester derivatives of these dyes can be attached to inert carrier macromolecules, such as Ficoll 70, for measurement of intracellular or intravesicular solvent viscosity. When the viscosity of the solvent was varied by various methods, the fluorescence intensity ratio (Cy3/Cy5) in a mixture of Cy3.18-Ficoll 70 (Cy3F70) and Cy5.18-Ficoll 70 (Cy5F70) in solution was found to be solely a function of solvent viscosity and was insensitive to other solvent parameters such as dielectric constant, temperature, and the ability of the solvent to form hydrogen bonds. Most important, it was insensitive to the presence of large macromolecules, such as proteins, which increase the shear viscosity but have little effect on solvent viscosity. Following microinjection into the cytoplasm of living tissue culture cells, no binding of Cy3F70 or Cy5F70 to intracellular components was detected by fluorescence recovery after photobleaching. Fluorescence intensity ratio imaging of Cy3F70 and Cy5F70 in non-motile interphase CV1 and PtK1 cells showed that the solvent viscosity of cytoplasm was not significantly different from water and showed no spatial variation.     

Absolute quantification of microRNAs by using a universal reference

MicroRNAs (miRNAs) are a species of small RNAs ∼21–23-nucleotides long that have been shown to play an important role in many different cellular, developmental, and physiological processes. Accordingly, numerous PCR-, sequencing-, or hybridization-based methods have been established to identify and quantify miRNAs. Their short length results in a high dynamic range of melting temperatures and therefore impedes a proper selection of detection probes or optimized PCR primers. While miRNA microarrays allow for massive parallel and accurate relative measurement of all known miRNAs, they have so far been less useful as an assay for absolute quantification. Here, we present a microarray-based approach for global and absolute quantification of miRNAs. The method relies on the parallel hybridization of the sample of interest labeled with Cy5 and a universal reference of 954 synthetic miRNAs in equimolar concentrations that are labeled with Cy3 on a microarray slide containing probes for all human, mouse, rat, and viral miRNAs (miRBase 12.0). Each single miRNA is quantified with respect to the universal reference canceling biases related to sequence, labeling, or hybridization. We demonstrate the accuracy of the method by various spike-in experiments. Furthermore, we quantified miRNA copy numbers in liver samples and CD34(+)/CD133(−) hematopoietic progenitor cells.     

New donor-acceptor pair for fluorescent immunoassays by energy transfer

A novel F?rster donor-acceptor dye pair for an immunoassay based on resonance energy transfer (RET) is characterized with respect to its photophysical properties. As donor and acceptor, we chose the long-wavelength excitable cyanine dyes Cy5 and Cy5.5, respectively. Due to the perfect spectral overlap, an exceptionally high R(0) value of 68.7 A is obtained in solution. For biochemical applications, antibodies (IgG) are labeled with Cy5, while a tracer for competitive binding is synthesized by labeling bovine serum albumin (BSA) with an analyte derivative and Cy5.5. Binding the dyes to proteins at a low dye/protein ratio increases the fluorescence lifetimes and quantum yields, leading to an enhanced R(0) value of 85.2 A. At higher dye/protein ratios, the formation of nonfluorescent dimeric species causes a decrease in the fluorescence lifetime and quantum yield due to RET from monomeric dyes to dimers within one protein molecule. The F?rster distances could be calculated using the dimer absorption spectra to 83.9 and 83.6 A for Cy5 and Cy5.5, respectively. Upon binding of the Cy5-labeled IgG to the tracer, efficient quenching of Cy5 fluorescence is observed. Steady-state and time-resolved measurements reveal that approximately 50% of the quenching results in F?rster-type RET, while the residual quenching effect is caused by static quenching processes. The applicability of this dye pair is demonstrated in a homogeneous competitive immunoassay for the pesticide simazine.     

Facile synthesis of thiol-reactive Cy3 and Cy5 derivatives with enhanced water solubility

The cyanine dyes Cy3 and Cy5 have proven valuable in numerous applications involving conjugation with proteins. Practical syntheses of lysine-selective, succinimidyl ester derivatives of these dyes have been published, and succinimidyl esters are commercially available. However, the published syntheses of cysteine-selective derivatives produce relatively low yields from expensive starting materials, or produce molecules with marginal water solubility for protein labeling. We report here facile syntheses (four steps, >50% overall yield) of iodoacetamide, sulfhydryl-reactive derivatives of the Cy3 and Cy5 fluorophores. These novel derivatives have good water solubility (>2.5 mM) and bear only one reactive side chain, reducing possible protein cross-linking encountered with previous derivatives.     

Stability, specificity and fluorescence brightness of multiply-labeled fluorescent DNA probes.

In this work, we studied the fluorescence and hybridization of multiply-labeled DNA probes which have the hydrophilic fluorophore 1-(straightepsilon-carboxypentynyl)-1'-ethyl- 3,3,3', 3'-tetramethylindocarbocyanine-5,5'-disulfonate (Cy3) attached via either a short or long linker at the C-5 position of deoxyuridine. We describe the effects of labeling density, fluorophore charge and linker length upon five properties of the probe: fluorescence intensity, the change in fluorescence upon duplex formation, the quantum yield of fluorescence (Phif), probe-target stability and specificity. For the hydrophilic dye Cy3, we have demonstrated that the fluorescence intensity andPhifare maximized when labeling every 6th base using the long linker. With a less hydrophilic dye, a labeling density this high could not be achieved without serious quenching of the fluorescence. The target specificity of multiply-labeled DNA probes was just as high as compared to the unmodified control probe, however, a less stable probe-target duplex is formed that exhibits a lower melting temperature. A mechanism that accounts for this destabilization is proposed which is consistent with our data. It involves dye-dye and dye-nucleotide interactions which appear to stabilize a single-stranded conformation of the probe.     

Functional analysis and comparative genomics of expressed sequence tags from the lycophyte Selaginella moellendorffii

Background

DNA microarrays are widely used in gene expression analyses. To increase throughput and minimize costs without reducing gene expression data obtained, we investigated whether four mRNA samples can be analyzed simultaneously by applying four different fluorescent dyes.

Results

Following tests for cross-talk of fluorescence signals, Alexa 488, Alexa 594, Cyanine 3 and Cyanine 5 were selected for hybridizations. For self-hybridizations, a single RNA sample was labelled with all dyes and hybridized on commercial cDNA arrays or on in-house spotted oligonucleotide arrays. Correlation coefficients for all combinations of dyes were above 0.9 on the cDNA array. On the oligonucleotide array they were above 0.8, except combinations with Alexa 488, which were approximately 0.5. Standard deviation of expression differences for replicate spots were similar on the cDNA array for all dye combinations, but on the oligonucleotide array combinations with Alexa 488 showed a higher variation.

Conclusion

In conclusion, the four dyes can be used simultaneously for gene expression experiments on the tested cDNA array, but only three dyes can be used on the tested oligonucleotide array. This was confirmed by hybridizations of control with test samples, as all combinations returned similar numbers of differentially expressed genes with comparable effects on gene expression.     

Evaluation of two-dimensional differential gel electrophoresis for proteomic expression analysis of a model breast cancer cell system

The technique of fluorescent two-dimensional (2D) difference gel electrophoresis for differential protein expression analysis has been evaluated using a model breast cancer cell system of ErbB-2 overexpression. Labeling of paired cell lysate samples with N-hydroxy succinimidyl ester-derivatives of fluorescent Cy3 and Cy5 dyes for separation on the same 2D gel enabled quantitative, sensitive, and reproducible differential expression analysis of the cell lines. SyproRuby staining was shown to be a highly sensitive and 2D difference gel electrophoresis-compatible method for post-electrophoretic visualization of proteins, which could then be picked and identified by matrix-assisted laser-desorption ionization mass spectroscopy. Indeed, from these experiments, we have identified multiple proteins that are likely to be involved in ErbB-2-mediated transformation. A triple dye labeling methodology was used to identify proteins differentially expressed in the cell system over a time course of growth factor stimulation. A Cy2-labeled pool of samples was used as a standard with all Cy3- and Cy5-labeled sample pairs to facilitate cross-gel quantitative analysis. DeCyder (Amersham Biosciences, Inc.) software was used to distinguish clear statistical differences in protein expression over time and between the cell lines.