Succinylation of cyclodextrin glycosyltransferase from Thermoanaerobacter sp. 501 enhances its transferase activity using starch as donor

A simple modification procedure, the succinylation of amino groups, was suitable to increase the transferase (disproportionation) activity of cyclodextrin glycosyltransferase (CGTase) from Thermoanaerobacter sp. 501 using different linear oligosaccharides as acceptors. On the contrary, the synthesis of cyclodextrins (CDs), the coupling of CDs with oligosaccharides, and the hydrolysis of starch decreased after chemical modification. The degree of succinylation of amino groups (45%) was accurately determined by MALDI-TOF mass spectrometry. The formation of CDs under industrial conditions was analyzed for native and succinylated CGTases, showing similar selectivity to alpha-, beta-, gamma-CD. The acceptor reaction with D-glucose using soluble starch as glucosyl donor was studied at 60 degrees C and pH 5.5. Malto-oligosaccharides (MOS) production was notably higher using the semisynthetic enzyme at different ratios (w/w) starch:D-glucose. Thus, more than 90% of the initial starch was converted into MOS (G2-G7) in 48 h employing a ratio donor:acceptor 1:2 (w/w).     

Biochemical and genetic analyses of a novel gamma-cyclodextrin glucanotransferase from an alkalophilic Bacillus clarkii 7364

On screening for microorganisms in soil obtained in Japan that produce large amounts of gamma-cyclodextrin (gamma-CD), we identified a novel alkalophilic bacterium, Bacillus clarkii 7364. The cyclodextrin glucanotransferase (CGTase) secreted into the culture medium by this bacterium was purified by affinity chromatography on a gamma-CD-immobilized column, followed by chromatography on a gel filtration column. The enzyme converted 13.7% of pre-gelatinized potato starch (10% w/w per reaction mixture) into CDs, and the majority (79%) of the product CDs was of the gamma form. This property is quite unique among known CGTases and thus we named this enzyme gamma-CGTase. The N-terminal and internal amino acid sequences of gamma-CGTase were determined and used to design PCR primers for amplification of the nucleotide sequence that encodes the gamma-CGTase gene. The entire gene sequence amplified by PCR was determined and then cloned into E. coli. The recombinant enzyme synthesized by E. coli retained biochemical properties quite similar to those of the original one. Comparison of the deduced amino acid sequence of gamma-CGTase with those of other known CGTases that have different product specificities revealed the importance of subsites -3 and -7 for the preferential gamma-cyclization activity.     

Recent advances in discovery,heterologous expression,and molecular engineering of cyclodextrin glycosyltransferase for versatile applications

Cyclodextrin glycosyltransferase (CGTase) is an important enzyme with multiple functions, in particular the production of cyclodextrins. It is also widely applied in baking and carbohydrate glycosylation because it participates in various types of catalytic reactions. New applications are being found with novel CGTases being isolated from various organisms. Heterologous expression is performed for the overproduction of CGTases to meet the requirements of these applications. In addition, various directed evolution techniques have been applied to modify the molecular structure of CGTase for improved performance in industrial applications. In recent years, substantial progress has been made in the heterologous expression and molecular engineering of CGTases. In this review, we systematically summarize the heterologous expression strategies used for enhancing the production of CGTases. We also outline and discuss the molecular engineering approaches used to improve the production, secretion, and properties (e.g., product and substrate specificity, catalytic efficiency, and thermal stability) of CGTase.     

Process modeling and simulation can guide process development: case study α-cyclodextrin

Modeling and simulation of biotechnological processes enables the quantification of possible process variations. In this way it provides a tool for guiding research towards the most promising directions. The method is shown on the basis of the case study of α-cyclodextrin production. The production process was modeled and the model is used to evaluate the potential impact of CGTases with new properties. Sensitivity analyses show that yield and selectivity are the crucial parameters. Reaction time has only limited impact and substrate concentration has to be above 20%. The use of thermostable enzymes provides some energy savings. Furthermore, the effect of new CGTases leading to a modified downstream processing was assessed.     

Combined enzymatic modification of stevioside and rebaudioside A

Cyclodextrin glucanotransferases (CGTases, EC 2.4.1.19) produced by mesophilic, thermophilic, alkaliphilic, and halophilic bacilli were used for transglycosylating stevioside and rebaudiosides A with the use of starch as a donor. CGTases produced by B. stearothermophilus B-5076 B. macerans BIO-4m were the most effective biocatalysts. This method can be successfully used for direct transglycosylation of stevia extract without purification of its individual components.     

Hydrophobic interaction chromatography on octyl sepharose--an approach for one-step platform purification of cyclodextrin glucanotransferases

Cyclodextrin glucanotransferase (CGTase) from Bacillus circulans ATCC 21783 was concentrated by ultrafiltration and subsequently purified by hydrophobic interaction chromatography on Octyl Sepharose 4 fast flow. The matrix was able to bind selectively to the enzyme at a very low ammonium sulfate concentration of 0.67 M and enzyme desorption was performed by decreasing gradient of the salt. The overall recovery was 80% with 689-fold purity. CGTases derived from four soil isolates and Toruzyme, the commercial preparation of CGTase, also bound to Octyl Sepharose under similar conditions at 0.67 M and eluted at 0.55-0.5 M of ammonium sulfate. Octyl Sepharose chromatography can thus be used as a platform approach for purification of CGTases from various bacterial sources. Long stretches of sequence predominated by hydrophobic amino acids are reportedly present in the starch binding domains of CGTases. Starch binding experiments indicated the binding of the enzymes to the octyl matrix through these domains.     

HYDROPHOBIC INTERACTION CHROMATOGRAPHY ON OCTYL SEPHAROSE—AN APPROACH FOR ONE-STEP PLATFORM PURIFICATION OF CYCLODEXTRIN GLUCANOTRANSFERASES

Cyclodextrin glucanotransferase (CGTase) from Bacillus circulans ATCC 21783 was concentrated by ultrafiltration and subsequently purified by hydrophobic interaction chromatography on Octyl Sepharose 4 fast flow. The matrix was able to bind selectively to the enzyme at a very low ammonium sulfate concentration of 0.67 M and enzyme desorption was performed by decreasing gradient of the salt. The overall recovery was 80% with 689-fold purity. CGTases derived from four soil isolates and Toruzyme, the commercial preparation of CGTase, also bound to Octyl Sepharose under similar conditions at 0.67 M and eluted at 0.55–0.5 M of ammonium sulfate. Octyl Sepharose chromatography can thus be used as a platform approach for purification of CGTases from various bacterial sources. Long stretches of sequence predominated by hydrophobic amino acids are reportedly present in the starch binding domains of CGTases. Starch binding experiments indicated the binding of the enzymes to the octyl matrix through these domains.     

Combined enzymatic modification of stevioside and rebaudioside A

Cyclodextrin glucanotransferases (CGTases, EC 2.4.1.19) produced by mesophilic, thermophilic, alkaliphilic, and halophilic bacilli were used for transglycosylating stevioside and rebaudiosides A with the use of starch as a donor. CGTases produced by Bacillus stearothermophilus B-5076 B. Macerans BIO-4m were the most effective biocatalysts. This method can be used successfully for direct transglycosylation of stevia extract without purification of its individual components.     

Interaction of gymnemic acid with cyclodextrins analyzed by isothermal titration calorimetry, NMR and dynamic light scattering

The physiological phenomenon that the antisweet taste effect of gymnemic acid (GA) is diminished by application of gamma-cyclodextrin (gamma-CD) to the mouth was evaluated at the molecular level using isothermal titration calorimetry, NMR and dynamic light scattering. These analyses showed that GA specifically binds to gamma-CD. Thermodynamic analysis using isothermal titration calorimetry revealed that the association constant of GA and gamma-CD is 10(5)-10(6) m(-1) with favorable enthalpy and entropy changes. The heat capacity change was negative and large, despite the change in accessible surface area upon binding being small. These thermodynamics indicate that the binding is dominated by hydrophobic interactions, which is in agreement with inclusion complex formation of gamma-CD. In addition, NMR measurements showed that in solution the spectra of GA are broad and sharpened by the addition of gamma-CD, indicating that unbound GA is in a water-soluble aggregate that is dispersed when it forms a complex with gamma-CD. Dynamic light scattering showed that the average diameter of unbound GA is > 30 nm and that of GA and gamma-CD complex is 2.2 nm, similar to unbound gamma-CD, supporting the aggregate property of GA and the inclusion complexation of GA by gamma-CD.     

Cyclodextrin production by cyclodextrin glycosyltransferase from Bacillus circulans DF 9R

Cyclodextrins (CD) are cyclic oligosaccharides with multiple applications in the food, pharmaceutical, cosmetic, agricultural and chemical industries. In this work, the conditions used to produce CD with cyclodextrin glycosyltransferase from Bacillus circulans DF 9R were optimized using experimental designs. The developed method allowed the partial purification and concentration of the enzyme from the cultural broth and, subsequently, the CD production, using the same cassava starch as enzyme adsorbent and as substrate. Heat-treatment of raw starch at 70 degrees C for 15 min in the presence of adsorbed cyclodextrin glycosyltransferase allowed the starch liquefaction without enzyme inactivation. The optimum conditions for CD production were: 5% (w/v) cassava starch, 15 U of enzyme per gram of substrate, reaction temperature of 56 degrees C and pH 6.4. After 4h, the proportion of starch converted to CD reached 66% (w/w) and the weight ratio of alpha-CD:beta-CD:gamma-CD was 1.00:0.70:0.16.     

Application of cyclodextrinase in non-complexant production of γ-cyclodextrin

The production of γ-cyclodextrin usually includes the utilization of organic complexants. However, the non-complexant production of γ-cyclodextrin is always being explored due to the defects of organic complexants. However, in non-complexant production, the separation of γ-cyclodextrin from α- and β-cyclodextrin is still a challenge. Here, the selective hydrolysis ability of a cyclodextrinase designated PpCD (cyclodextrinase from Palaeococcus pacificus) on α-cyclodextrin, β-cyclodextrin, and γ-cyclodextrin was proved. The k_cat/K_m values of PpCD for α-cyclodextrin and β-cyclodextrin were roughly 12-fold and 5-fold higher than that of γ-cyclodextrin. It was proved that PpCD had selective hydrolysis ability and its γ-cyclodextrin purification performance was apparent on various simulated cyclodextrin mixtures with reported proportions derived from different CGTases. Besides, the hydrolysis temperature was optimized and it could be seen that 85°C was appropriate for the production of γ-cyclodextrin. In addition, the production of γ-cyclodextrin was achieved by using PpCD in the γ-CGTase reaction products.     

Starch digestion in tropical fishes: isolation, structural studies and inhibition kinetics of alpha-amylases from two tilapias Oreochromis niloticus and Sarotherodon melanotheron

alpha-Amylases from the intestinal cavity of two tilapia species, Oreochromis niloticus (ONI-AMY) and Sarotherodon melanotheron (SME-AMY), were purified using ammonium sulfate precipitation, affinity chromatography and chromatofocusing procedures. The purification was approximately 100-fold. The amylolytic activity, specific activity, product distribution, pH and temperature profile of ONI-AMY and SME-AMY are quite similar. The molecular mass differs slightly: 56600 (ONI-AMY) vs. 55500 (SME-AMY). As shown by isoelectric focusing analysis, both amylases contain two isoforms A and B with distinct pI: 7.2 (A) and 7.8 (B), vs. 8.3 (A) and 8.8 (B), respectively. It was not possible to isolate B, since B converts into A with time. The kinetics of the inhibition of ONI-AMY and SME-AMY activity by alpha-, beta- and gamma-cyclodextrin (alpha-, beta- and gamma-CD) were investigated using amylose as the substrate. Statistical analysis of the kinetic data expressed using a general velocity equation and assuming rapid equilibrium showed that the inhibition is of the mixed noncompetitive type. Similar results were obtained with ONI-AMY and SME-AMY. beta- and gamma-CD are stronger inhibitors than alpha-CD. ONI-AMY and SME-AMY are then closely related and show the general features common to the members of the alpha-amylase class (family 13). They enable ONI and SME tilapias to digest starch in food.     

Optimisation of batch culture conditions for cyclodextrin glucanotransferase production from Bacillus circulans DF 9R

Background  

The extracellular enzyme cyclodextrin glucanotransferase (CGTase) synthesizes cyclic malto-oligosaccharides called cyclodextrins (CDs) from starch and related α-1,4-glucans. CGTases are produced by a variety of bacteria, mainly Bacillus species, by submerged culture in complex medium. CGTases differ in the amount and types of CDs produced. In addition, CGTase production is highly dependent on the strain, medium composition and culture conditions. Therefore we undertook this study with a newly isolated strain of Bacillus circulans.     

Engineering of cyclodextrin glucanotransferases and the impact for biotechnological applications

Cyclodextrin glucanotransferases (CGTases) are industrially important enzymes that produce cyclic α-(1,4)-linked oligosaccharides (cyclodextrins) from starch. Cyclodextrin glucanotransferases are also applied as catalysts in the synthesis of glycosylated molecules and can act as antistaling agents in the baking industry. To improve the performance of CGTases in these various applications, protein engineers are screening for CGTase variants with higher product yields, improved CD size specificity, etc. In this review, we focus on the strategies employed in obtaining CGTases with new or enhanced enzymatic capabilities by searching for new enzymes and improving existing enzymatic activities via protein engineering.     

Site-directed mutations in Alanine 223 and Glycine 255 in the acceptor site of gamma-Cyclodextrin glucanotransferase from Alkalophilic Bacillus clarkii 7364 affect cyclodextrin production

A cyclodextrin glucanotransferase (CGTase) from Bacillus clarkii 7364 converts starch into gamma-cyclodextrin (gamma-CD) with high specificity. Comparison of the deduced amino acid sequence of this CGTase with those of other typical CGTases revealed that several amino acids are deleted or substituted with others at several subsites. Of these amino acids, Ala223 at subsite +2 and Gly255 at subsite +3 in the acceptor site of the enzyme were replaced by several amino acids through site-directed mutagenesis. The replacement of Ala223 by lysine, arginine and histidine strongly enhanced the gamma-CD-forming activity in the neutral pH range. On the other hand, all mutants obtained on replacing Gly255 with the above amino acids showed significant decreases in the gamma-CD-forming activity. Taking into account both the kinetic parameters and pKa values of the side chains of the three basic amino acids, the protonation state of the amino groups in their side chains at subsite +2 seems to enhance the hydrogen bonding interaction between these basic amino acids and the glucose residues of linear oligosaccharides. The enhancement of the interaction may play an important role by helping the substrate reach subsite +1, hence increasing the gamma-CD-forming activity and kcat value.     

Spectra and structure of complexes formed by sodium fusidate and potassium helvolate with beta- and gamma-cyclodextrin

The complexation of two steroid antibiotics of the fusidane family, sodium fusidate and potassium helvolate, by beta-CD and gamma-CD has been studied by using 1D and 2D-NMR techniques. Both guests form 1:1 complexes with gamma-CD and 1:2 (guest:cyclodextrin) complexes with beta-CD. Thus, both antibiotics behave as monotopic and ditopic guests when they are complexed by gamma-CD and beta-CD, respectively. Both steroids enter into the cavity of the gamma-CD by the side chain, reaching the central region of the steroid (rings C and D), whereas the A and B (partially) rings remain outside. For beta-CD complexes, ROESY spectra show a remarkable absence of interactions of the protons of the C and D rings, whereas clear interactions corresponding to the side chain, and A and B rings are observed. The obtained equilibrium constants (see previous paper) are discussed in terms of the structures proposed for the complexes. NMR spectra of sodium fusidate are revised, and a full assignment of the 1H and 13C NMR spectra is presented for potassium helvolate.     

γ-Cyclodextrin: a review on enzymatic production and applications

Cyclodextrins are cyclic α-1,4-glucans that are produced from starch or starch derivates using cyclodextrin glycosyltransferase (CGTase). The most common forms are α-, β-, and γ-cyclodextrins. This mini-review focuses on the enzymatic production, unique properties, and applications of γ-cyclodextrin as well as its difference with α- and β-cyclodextrins. As all known wild-type CGTases produce a mixture of α-, β-, and γ-cyclodextrins, the obtaining of a CGTase predominantly producing γ-cyclodextrin is discussed. Recently, more economic production processes for γ-cyclodextrin have been developed using improved γ-CGTases and appropriate complexing agents. Compared with α- and β-cyclodextrins, γ-cyclodextrin has a larger internal cavity, higher water solubility, and more bioavailability, so it has wider applications in many industries, especially in the food and pharmaceutical industries.     

Rational design of cyclodextrin glycosyltransferase from Bacillus circulans strain 251 to increase alpha-cyclodextrin production

Cyclodextrin glycosyltransferases (CGTase) (EC 2.4.1.19) are extracellular bacterial enzymes that generate cyclodextrins from starch. All known CGTases produce mixtures of alpha, beta, and gamma-cyclodextrins. A maltononaose inhibitor bound to the active site of the CGTase from Bacillus circulans strain 251 revealed sugar binding subsites, distant from the catalytic residues, which have been proposed to be involved in the cyclodextrin size specificity of these enzymes. To probe the importance of these distant substrate binding subsites for the alpha, beta, and gamma-cyclodextrin product ratios of the various CGTases, we have constructed three single and one double mutant, Y89G, Y89D, S146P and Y89D/S146P, using site-directed mutagenesis. The mutations affected the cyclization, coupling; disproportionation and hydrolyzing reactions of the enzyme. The double mutant Y89D/S146P showed a twofold increase in the production of alpha-cyclodextrin from starch. This mutant protein was crystallized and its X-ray structure, in a complex with a maltohexaose inhibitor, was determined at 2.4 A resolution. The bound maltohexaose molecule displayed a binding different from the maltononaose inhibitor, allowing rationalization of the observed change in product specificity. Hydrogen bonds (S146) and hydrophobic contacts (Y89) appear to contribute strongly to the size of cyclodextrin products formed and thus to CGTase product specificity. Changes in sugar binding subsites -3 and -7 thus result in mutant proteins with changed cyclodextrin production specificity.     

Characteristics of pyrene phospholipid/gamma-cyclodextrin complex

Recently, it was demonstrated that gamma-cyclodextrins (gamma-CDs) greatly accelerates transfer of hydrophobic pyrene-labeled and other fluorescent phospholipid derivatives from vesicles to cells in culture (). To understand better the characteristics of this process, we studied the interaction of gamma-CD with pyrene-labeled phosphatidylcholines (PyrPCs) using a variety of physical methods. Either one or both of the acyl chains of PC was labeled with a pyrene moiety (monoPyrPCs and diPyrPCs, respectively), and the length of the labeled chain(s) varied from 4 to 14 carbons. Fluorescent binding assays showed that the association constant decreases strongly with increasing acyl chain length. PyrPC/gamma-CD stoichiometry was 1:2 for the shorter chain species, but changed to 1:3 when the acyl chain length exceeded 8 (diPyrPCs) or 10 (monoPyrPCs) carbons. The activation energy for the formation of diPyr(10)PC/gamma-CD complex was high, i.e., +92 kJ/mol, indicating that the phospholipid molecule has to fully emerge from the bilayer before complex formation can take place. The free energy, enthalpy, and entropy of transfer of monoPyrPC from bilayer to gamma-CD complex were close to zero. The absorption, Fourier transform infrared, and fluorescence spectral measurements and lifetime analysis indicated that the pyrene moiety lies inside the CD cavity and is conformationally restricted, particularly when the labeled chain is short. The acyl chains of a PyrPC molecule seem to share a CD cavity rather than occupy different ones. The present data provide strong evidence that the ability of gamma-CD to enhance intermembrane transfer of pyrene-labeled phospholipids is based on the formation of stoichiometric complexes in the aqueous phase. This information should help in designing CD derivatives that are more efficient lipid carriers then those available at present.     

Bacteriocin Production and Different Strategies for Their Recovery and Purification

Bacteriocins from lactic acid bacteria (LAB) are a diverse group of antimicrobial proteins/peptides, offering potential as biopreservatives, and exhibit a broad spectrum of antimicrobial activity at low concentrations along with thermal as well as pH stability in foods. High bacteriocin production usually occurs in complex media. However, such media are expensive for an economical production process. For effective use of bacteriocins as food biopreservatives, there is a need to have heat-stable wide spectrum bacteriocins produced with high-specific activity in food-grade medium. The main hurdles concerning the application of bacteriocins as food biopreservatives is their low yield in food-grade medium and time-consuming, expensive purification processes, which are suitable at laboratory scale but not at industrial scale. So, the present review focuses on the bacteriocins production using complex and food-grade media, which mainly emphasizes on the bacteriocin producer strains, media used, different production systems used and effect of different fermentation conditions on the bacteriocin production. In addition, this review emphasizes the purification processes designed for efficient recovery of bacteriocins at small and large scale.