HydroLink gel electrophoresis (HLGE). III. High DNA loading capacity and recovery of dsDNA

Novel polymers have been prepared for high performance electrophoretic separations of double-stranded DNA (dsDNA). These materials are part of a family of HydroLink high performance electrophoresis polymers. A comparison of the resolving capabilities of dsDNA HydroLink gels to agarose and polyacrylamide separations has been described in an accompanying paper. In this study, we demonstrate that dsDNA HydroLink gels possess ten times the loading capacity of comparable polyacrylamide or agarose gels without compromise to resolution or biological integrity of the separated DNA. A simplified procedure for recovery of separated components is also described.     

Interaction study between double-stranded DNA and berberine using capillary zone electrophoresis

Two non-self-complementary 17-mer double-stranded DNA (dsDNA) with four different central base pairs were designed to systematically investigate the binding affinity and sequence specificity of berberine with dsDNA by capillary zone electrophoresis (CZE). The data analysis with the Kenndler model proved only low affinity between dsDNA and berberine and suggested some weak binding preference of berberine for AATT-containing to GGCC-containing dsDNA. The binding constant, Ka, between berberine and dsDNA(AB) was about (1.0 +/- 0.7) x 10(3) M(-1). In addition, the separation of single-stranded DNA (ssDNA) from dsDNA under simple electrophoretic conditions enabled CZE to be a potentially alternative tool to check the extent of DNA annealing, which is usually done by the time-consuming and labor-intensive slab electrophoresis.     

Characterization of the helicase activity of the Escherichia coli RecBCD enzyme using a novel helicase assay

We describe an assay to measure the extent of enzymatic unwinding of DNA by a DNA helicase. This assay takes advantage of the quenching of the intrinsic protein fluorescence of Escherichia coli SSB protein upon binding to ssDNA and is used to characterize the DNA unwinding activity of recBCD enzyme. Unwinding in this assay is dependent on the presence of recBCD enzyme and linear dsDNA, is consistent with the known properties of recBCD enzyme, and closely parallels other methods for measuring recBCD enzyme helicase activity. The effects of varying temperature, substrate concentrations, enzyme concentration, and mono- and divalent salt concentrations on the helicase activity of recBCD enzyme were characterized. The apparent Km values for recBCD enzyme helicase activity on linear M13 dsDNA molecules at 25 degrees C are 0.6 nM dsDNA molecules and 130 microM ATP, respectively. The apparent turnover number for unwinding is approximately 15 microM base pairs s-1 (microM recBCD enzyme)-1. When this rate is corrected for the observed stoichiometry of recBCD enzyme binding to dsDNA, kcat for helicase activity corresponds to an unwinding rate of approximately 250 base pairs of DNA s-1 (functional recBCD complex)-1 at 25 degrees C. At 37 degrees C, the apparent Km value for dsDNA molecules was the same as that at 25 degrees C, but the apparent turnover number became 56 microM base pairs s-1 (microM recBCD enzyme)-1 [or 930 base pairs s-1 (functional recBCD complex)-1 when corrected for observed stoichiometry]. With increasing NaCl concentration, kcat peaks at 100 mM, and the apparent Km value for dsDNA increases by 3-fold at 200 mM NaCl. In the presence of 5 mM calcium acetate, the apparent Km value is increased by 3-fold, and kcat decreased by 20-30%. We have also shown that recBCD enzyme molecules are able to catalytically unwind additional dsDNA substrates subsequent to initiation, unwinding, and dissociation from a previous dsDNA molecule.     

Visualization of the homologous pairing of DNA catalyzed by the bacteriophage T4 UvsX protein

The uvsX gene product is essential for DNA repair and general recombination in T4 bacteriophage. The ability of UvsX protein to catalyze the homologous pairing of single-stranded DNA (ssDNA) with double-stranded DNA (dsDNA) in vitro was examined by electron microscopic (EM), nitrocellulose filter binding, and gel electrophoretic methods. Optimal joining was observed at ratios of UvsX protein:ssDNA of 2 nucleotides/protein monomer. At this level, the ssDNA was fully covered by UvsX protein as seen by EM, while the dsDNA appeared protein-free. Using this stoichiometry, the pairing of circular ssDNA with homologous supertwisted dsDNA was found to produce a high frequency of complexes in which a supertwisted dsDNA molecule was joined to a UvsX protein-ssDNA filament over a distance of less than 100 base pairs. These joints were labile to deproteinization and must have been paranemic. Pairing of linear ssDNA containing buried homology to the dsDNA produced identical structures. Pairing of fully homologous linear ssDNA and supertwisted dsDNA yielded D-loop joints (plectonemic) as seen by EM following deproteinization. Both the paranemic and the plectonemic joints were at sites of homology, as demonstrated by restriction cleavage of the complexes. Visualization of the joined complexes prior to deproteinization showed that 50% of the joints had the architecture of the paranemic joints, whereas in the remainder, a topologically relaxed dsDNA circle merged with the UvsX protein-ssDNA filament for a distance of 450 base pairs. The structure of the filament was not visibly altered in this region. These observations are similar, but not identical, to findings in parallel studies utilizing the RecA protein of Escherichia coli.     

DNA detection system using molecularly imprinted polymer as the gel matrix in electrophoresis

To develop a simple and inexpensive method for DNA detection, we prepared a molecularly imprinted polymer (MIP) for recognizing a specific double-stranded DNA (dsDNA) sequence and used it in an electrophoretic gel matrix. The MIP gel has many binding sites that are complementary in size, shape, and arrangement of functional groups of the target dsDNA sequence. During MIP gel electrophoresis (MIPGE), migration of the target dsDNA should be hindered by the capture effect of the binding sites in the MIP gel. This was confirmed by observation of deviations from the linear relationship between the migration distances of the DNA standard size markers in the polyacrylamide gel and those in the MIP gel. The migration distances of nontarget dsDNA maintained a linear relationship, however. In addition, the sequence selectivity of dsDNA in this method was investigated by using the Ha-ras gene and its point mutants. Except for A.T to T.A base pair substitution, mutant dsDNA (for example, substitution from A.T to C.G and from G.C to T.A) could be distinguished from the target (wild-type) dsDNA. Although some improvement in A.T (T.A) base pair distinction is still needed, this study is the first to demonstrate detection of a specific dsDNA sequence with MIPs and, as such, opens up a new realm for practical applications of MIPs.     

HydroLink gel electrophoresis: rapid electroblotting of dsDNA

Blotting and probing of DNA, RNA and proteins after electrophoresis is a powerful technique for the study of the structure and function of biomolecules. Key factors in successful blotting experiments are efficiency of transfer, maintenance of the resolution obtained during gel electrophoresis, accuracy of the probes used and sensitivity of the detection method. We have recently developed a system for the high performance resolution of DNA with 10-fold greater capacity for sample loads than agarose or polyacrylamide. In the present study, we describe conditions for the rapid (less than one hour) and quantitative electrotransfer of DNA in the 100-23,000-base pair range, with subsequent conditions for probing of transfer membranes using radioactive or biotinylated probes. Our results suggest complete maintenance of the high-resolution characteristic of HydroLink gel electrophoresis and potentially increased sensitivity due to the high loading capacity in HydroLink gel electrophoresis.     

RecA homology search is promoted by mechanical stress along the scanned duplex DNA

A RecA-single-stranded DNA (RecA-ssDNA) filament searches a genome for sequence homology by rapidly binding and unbinding double-stranded DNA (dsDNA) until homology is found. We demonstrate that pulling on the opposite termini (3' and 5') of one of the two DNA strands in a dsDNA molecule stabilizes the normally unstable binding of that dsDNA to non-homologous RecA-ssDNA filaments, whereas pulling on the two 3', the two 5', or all four termini does not. We propose that the 'outgoing' strand in the dsDNA is extended by strong DNA-protein contacts, whereas the 'complementary' strand is extended by the tension on the base pairs that connect the 'complementary' strand to the 'outgoing' strand. The stress resulting from different levels of tension on its constitutive strands causes rapid dsDNA unbinding unless sufficient homology is present.     

Separation of large DNA restriction fragments on a size-exclusion column by a nonideal mechanism

Double-strand DNA (dsDNA) restriction fragments were chromatographed on the DuPont Bioseries GF-250 column. Two anomolous chromatographic properties were observed. (1) A triphasic dependence of retention on dsDNA chain length was observed. Small DNA fragments (less than 500 base pairs) displayed typical size exclusion, intermediate size DNA (800-5000 base pairs) eluted in the void volume, and larger DNA fragments were increasingly retained. (2) The void volume for nucleic acids was less than that for large polypeptides. The retention of moderately large DNA fragments increased linearly as the square root of the chain length over the range 5.5 to 50 kilobase pairs (ca. 3-30 X 10(6) Mr). A number of eluant manipulations were carried out in order to examine the mechanism by which the larger DNA fragments were being retained and separated. Evidence was not obtained to support either ion exchange or reverse phase as the retention mechanism. The usefulness of such a column for molecular biological manipulations is illustrated by the rapid isolation of homogeneous viral DNA fragments resected from their cloning vectors with restriction endonucleases.     

Biochemical characterization of the DNA helicase activity of the escherichia coli RecQ helicase

We demonstrate that RecQ helicase from Escherichia coli is a catalytic helicase whose activity depends on the concentration of ATP, free magnesium ion, and single-stranded DNA-binding (SSB) protein. Helicase activity is cooperative in ATP concentration, with an apparent S(0.5) value for ATP of 200 microm and a Hill coefficient of 3.3 +/- 0.3. Therefore, RecQ helicase utilizes multiple, interacting ATP-binding sites to mediate double-stranded DNA (dsDNA) unwinding, implicating a multimer of at least three subunits as the active unwinding species. Unwinding activity is independent of dsDNA ends, indicating that RecQ helicase can unwind from both internal regions and ends of dsDNA. The K(M) for dsDNA is 0.5-0.9 microm base pairs; the k(cat) for DNA unwinding is 2.3-2.7 base pairs/s/monomer of RecQ helicase; and unexpectedly, helicase activity is optimal at a free magnesium ion concentration of 0.05 mm. Omitting Escherichia coli SSB protein lowers the rate and extent of dsDNA unwinding, suggesting that RecQ helicase associates with the single-stranded DNA (ssDNA) product. In agreement, the ssDNA-dependent ATPase activity is reduced in proportion to the SSB protein concentration; in its absence, ATPase activity saturates at six nucleotides/RecQ helicase monomer and yields a k(cat) of 24 s(-1). Thus, we conclude that SSB protein stimulates RecQ helicase-mediated unwinding by both trapping the separated ssDNA strands after unwinding and preventing the formation of non-productive enzyme-ssDNA complexes.     

Concerted intercalation and minor groove recognition of DNA by a homodimeric thiazole orange dye

The thiazole orange dye TOTO binds to double-stranded DNA (dsDNA) by a sequence selective bis-intercalation. Each chromophore is sandwiched between two base pairs in a (5'-CpT-3'):(5'-ApG-3') site, and the linker spans two base pairs in the minor groove. We have used one- and two-dimensional NMR spectroscopy to examine the dsDNA binding of an analogue of TOTO in which the linker has been modified to contain a bipyridyl group (viologen) that has minor groove binding properties. We have investigated the binding of this analogue, called TOTOBIPY, to three different dsDNA sequences containing a 5'-CTAG-3', a 5'-CTTAG-3', and a 5'-CTATAG-3' sites, respectively, demonstrating that TOTOBIPY prefers to span three base pairs. The many intermolecular NOE connectivities between TOTOBIPY and the d(CGCTTAGCG):d(CGCTAAGCG) oligonucleotide in the complex shows that the bipyridyl-containing linker is positioned in the minor groove and spans three base pairs. Consequently, we have succeeded in designing and synthesizing a ligand that recognizes an extended recognition sequence of dsDNA as the result of a concerted intercalation and minor groove binding mode.     

Poly(ethyleneoxide) for high resolution and high-speed separation of DNA by capillary electrophoresis

Capillary electrophoresis (CE) with polyacrylamide gels has already been demonstrated to allow single-base resolution of single-stranded DNA. However, linear polyacrylamide is not an ideal matrix because of a high viscosity and difficulties in preparing the polymer with well defined pore sizes. Alternatively, poly(ethyleneoxide) (PEO) with a large range of molecular masses from 300 000 to 8 000 000 is available commercially. In addition, it is easy to prepare homogeneous solutions to provide highly reproducible separation performance with sufficient resolution. Single-base resolution of double-stranded DNA between 123 and 124 base pairs can be achieved by the use of homogeneous matrices prepared from PEO (2.5% M_r 8 000 000), and even better resolution is achieved by using mixed polymer matrices. With further work, it should be possible to change the fractions and the total amounts of polymers to achieve even higher resolution for different samples with different size ranges of fragments. Another advantage of mixed polymer matrices is that relatively high resolution can be obtained while maintaining a relatively low viscosity compared to linear polyacrylamide with identical contents of formamide and urea, which makes it easier to fill these matrices into small capillaries.     

Use of ion exchange chromatography for the study of RecA-DNA interaction

In vitro binding of RecA protein to double-stranded DNA (dsDNA) was studied using ion-exchange liquid chromatography. The method allowed quantification of both free DNA and free protein. The results unambiguously showed a binding stoichiometry of 3 base pairs per RecA monomer. The binding exhibited cooperativity, and the stoichiometry suggested that RecA does not form complexes with two molecules of dsDNA. More than 90% of RecA molecules in the sample were active for DNA binding.     

Effects of bulge composition and flanking sequence on the kinking of DNA by bulged bases

We recently showed that bulged bases kink duplex DNA, with the degree of kinking increasing in roughly equal increments as the number of bases in the bulge increases from one to four [Hsieh, C.-H., & Griffith, J.D. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 4833-4837]. Here we have examined the kinking of DNA by single A, C, G, or T bulges with different neighboring base pairs. Synthetic 30 base pair (bp) duplex DNAs containing 2 single-base bulges spaced by 10 bp were ligated head to tail, and their electrophoretic behavior in highly cross-linked gels was examined. All bulge-containing DNAs showed marked electrophoretic retardations as compared to non-bulge-containing DNA. Regardless of the sequence of the flanking base pairs, purine bulges produced greater retardations than pyrimidine bulges. Furthermore, C and T bulges produced the same retardations as did G and A bulges. Bulged DNA containing different flanking base pairs showed marked differences in electrophoretic mobility. For C-bulged DNA, the greatest retardations were observed with G.C neighbors, the least with T.A neighbors, and an intermediate amount with a mixture of neighboring base pairs. For A-bulged DNA, the retardations were greatest with G.C neighbors, less with T.A neighbors, even less with a mixture of neighboring base pairs, and finally least with C.G neighbors. Thus flanking base pairs affect C-bulged DNA and A-bulged DNA differently, and G.C and C.G flanking base pairs were seen to have very different effects. These results imply an important role of base stacking in determining how neighboring base pairs influence the kinking of DNA by a single-base bulge.     

Joining of short DNA oligonucleotides with base pair mismatches by T4 DNA ligase

Oligonucleotide-directed mutagenesis is a widely used method for studying enzymes and improving their properties. The number of mutants that can be obtained with this method is limited by the number of synthetic 25-30mer oligonucleotides containing the mutation mismatch, becoming impracticably large with increasing size of a mutant library. To make this approach more practical, shorter mismatching oligonucleotides (7-12mer) might be employed. However, the introduction of these oligonucleotides in dsDNA poses the problem of sealing a DNA nick containing 5'-terminal base pair mismatches. In the present work we studied the ability of T4 DNA ligase to catalyze this reaction. It was found that T4 DNA ligase effectively joins short oligonucleotides, yielding dsDNA containing up to five adjacent mismatches. The end-joining rate of mismatching oligonucleotides is limited by the formation of the phosphodiester bond, decreasing with an increase in the number of mismatching base pairs at the 5'-end of the oligonucleotide substrate. However, in the case of a 3 bp mismatch, the rate is higher than that obtained with a 2 bp mismatch. Increasing the matching length with the number of mismatching base pairs fixed, or moving the mismatching motif downstream with respect to the joining site increases the rate of ligation. The ligation rate increases with the molar ratio [oligonucleotide:dsDNA]; however, at high excess of the oligonucleotide, inhibition of joining was observed. In conclusion, 9mer oligonucleotides containing a 3 bp mismatch are found optimal substrates to introduce mutations in dsDNA, opening perspectives for the application of T4 DNA ligase in mutagenesis protocols.     

Force spectroscopy and fluorescence microscopy of dsDNA–YOYO-1 complexes: implications for the structure of dsDNA in the overstretching region

When individual dsDNA molecules are stretched beyond their B-form contour length, they reveal a structural transition in which the molecule extends 1.7 times its contour length. The nature of this transition is still a subject of debate. In the first model, the DNA helix unwinds and combined with the tilting of the base pairs (which remain intact), results in a stretched form of DNA (also known as S-DNA). In the second model the base pairs break resulting effectively in two single-strands, which is referred to as force-induced melting. Here a combination of optical tweezers force spectroscopy with fluorescence microscopy was used to study the structure of dsDNA in the overstretching regime. When dsDNA was stretched in the presence of 10 nM YOYO-1 an initial increase in total fluorescence intensity of the dye–DNA complex was observed and at an extension where the dsDNA started to overstretch the fluorescence intensity leveled off and ultimately decreased when stretched further into the overstretching region. Simultaneous force spectroscopy and fluorescence polarization microscopy revealed that the orientation of dye molecules did not change significantly in the overstretching region (78.0°± 3.2°). These results presented here clearly suggest that, the structure of overstretched dsDNA can be explained accurately by force induced melting.     

Cryo-EM structure of the DNA-dependent protein kinase catalytic subunit at subnanometer resolution reveals alpha helices and insight into DNA binding

The DNA-dependent protein kinase catalytic subunit (DNA-PKcs) regulates the nonhomologous end joining pathway for repair of double-stranded DNA (dsDNA) breaks. Here, we present a 7A resolution structure of DNA-PKcs determined by cryo-electron microscopy single-particle reconstruction. This structure is composed of density rods throughout the molecule that are indicative of alpha helices and reveals structural features not observed in lower resolution EM structures. Docking of homology models into the DNA-PKcs structure demonstrates that up to eight helical HEAT repeat motifs fit well within the density. Surprisingly, models for the kinase domain can be docked into either the crown or base of the molecule at this resolution, although real space refinement suggests that the base location is the best fit. We propose a model for the interaction of DNA with DNA-PKcs in which one turn of dsDNA enters the central channel and interacts with a resolved alpha-helical protrusion.     

Fluorescent Determination of Double-stranded DNA with an Anionic 1,1′-Azonaphthalene Derivative

Palatine chrome black 6BN (PCB6BN) is virtually non-fluorescent in an aqueous solution or in the presence of single-stranded DNA (ssDNA), whereas the fluorescence intensity of PCB6BN was linearly enhanced up to 300 μM of double-stranded DNA (dsDNA) base pairs. PCB6BN could be a useful fluorescent probe for quantifying dsDNA even when ssDNA is present for both heterogeneous and homogeneous assays.     

Analysis and purification of nucleic acids by ion-pair reversed-phase high-performance liquid chromatography

Sizing of DNA fragments is a routine analysis traditionally performed on agarose or polyacrylamide gels. Electrophoretic analysis is labor-intensive with only limited potential for automation. Recovery of DNA fragments from gels is cumbersome. We present data on automated, size-based separation of DNA fragments by ion-pair reversed-phase high performance liquid chromatography (IP RP HPLC) - DNA chromatography - on the WAVE DNA Fragment Analysis System with the DNASep cartridge. This system is suitable for accurate and rapid sizing of double-stranded (ds) DNA fragments from 50 to ca. 2000 base pairs (bp). Fluorescently labeled DNA fragments are compatible with the technology. Length-dependent separation of dsDNA fragments is sequence independent and retention times are highly reproducible. The resolving capabilities of DNA chromatography are illustrated by the analysis of multiple DNA size markers. Resolved dsDNA fragments are easily collected and are suitable for downstream applications such as sequencing and cloning. DNA chromatography under denaturing conditions with fluorescently labeled DNA fragments offers a means for the separation and purification of individual strands of dsDNA. Analysis of DNA fragments on the WAVE System is highly automated and requires minimal manual intervention. DNA chromatography offers a reliable and automated alternative to gel electrophoresis for the analysis of DNA fragments.     

Deuterium and its role in the machinery of evolution

An argument is presented that the spontaneous mutation rate, the core of evolution theory, may be dictated by the deuterium/hydrogen (D/H) abundance ratio. This argument is supported by quantum mechanical calculations of the zero-point energy reduction for DNA base pairs upon deuterium substitution for hydrogen and recent experiments that show that the rate of catalytic dsDNA unwinding is dependent on the stability of the dsDNA.