Quantification by real-time PCR of developmental and adult myosin mRNA in rat muscles

A real-time RT-PCR assay using newly designed primers was developed to analyze developmental and adult MHC mRNA expression both in skeletal muscles and single fibers. Only 4 ng of total RNA was necessary for the analysis of the relative mRNA expression of MHC genes. Different validation steps were realized concerning both specificity and sensitivity of each primer set, and linearity and efficiency of each real-time PCR amplification. Then, quantification of MHC mRNA in neonatal and adult muscles as well as in single fibers was done by the ΔC_T method, with CycA gene as the reference gene. Due to a higher sensitivity than that of a competitive PCR method, we demonstrated that this assay is suitable to study very low level of MHC mRNA expression as developmental MHC in adult muscle and to quantify mRNA from very small samples.     

A Quick Method for Species Identification of Japanese Eel (<Emphasis Type="Italic">Anguilla japonica</Emphasis>) Using Real-Time PCR: An Onboard Application for Use During Sampling Surveys

To compensate for the limited number of morphological characteristics of fish eggs and larvae, we established a convenient and robust method of species identification for eggs of the Japanese eel (Anguilla japonica) using a real-time polymerase chain reaction (PCR) that can be performed onboard research ships at sea. A total of about 1.2 kbp of the mitochondrial 16S ribosomal RNA gene sequences from all species of Anguilla and 3 other anguilliform species were compared to design specific primer pairs and a probe for A. japonica. This real-time PCR amplification was conducted for a total of 44 specimens including A. japonica, A. marmorata, A. bicolor pacifica, and 6 other anguilliform species. Immediate PCR amplification was only observed in A. japonica. We then tested this method under onboard conditions and obtained the same result as had been produced in the laboratory. These results suggest that real-time PCR can be a powerful tool for detecting Japanese eel eggs and newly hatched larvae immediately after onboard sampling during research cruises and will allow targeted sampling efforts to occur rapidly in response to any positive onboard identification of the eggs and larvae of this species.     

Detection and Quantification of Fusarium oxysporum f. sp. niveum Race 1 in Plants and Soil by Real-time PCR

Fusarium wilt caused by Fusarium oxysporum f. sp. niveum (Fon) is the most serious soil-borne disease in the world and has become the main limiting factor of watermelon production. Reliable and quick detection and quantification of Fon are essential in the early stages of infection for control of watermelon Fusarium wilt. Traditional detection and identification tests are laborious and cannot efficiently quantify Fon isolates. In this work, a real-time polymerase chain reaction (PCR) assay has been described to accurately identify and quantify Fon in watermelon plants and soil. The FONRT-18 specific primer set which was designed based on identified specific sequence amplified a specific 172 bp band from Fon and no amplification from the other formae speciales of Fusarium oxysporum tested. The detection limits with primers were 1.26 pg/μl genomic DNA of Fon, 0.2 pg/ng total plant DNA in inoculated plant, and 50 conidia/g soil. The PCR assay could also evaluate the relationships between the disease index and Fon DNA quantity in watermelon plants and soil. The assay was further used to estimate the Fon content in soil after disinfection with CaCN₂. The real-time PCR method is rapid, accurate and reliable for monitoring and quantification analysis of Fon in watermelon plants and soil. It can be applied to the study of disease diagnosis, plant-pathogen interactions, and effective management.     

Quality control for quantitative PCR based on amplification compatibility test

Quantitative qPCR is a routinely used method for the accurate quantification of nucleic acids. Yet it may generate erroneous results if the amplification process is obscured by inhibition or generation of aberrant side-products such as primer dimers. Several methods have been established to control for pre-processing performance that rely on the introduction of a co-amplified reference sequence, however there is currently no method to allow for reliable control of the amplification process without directly modifying the sample mix. Herein we present a statistical approach based on multivariate analysis of the amplification response data generated in real-time. The amplification trajectory in its most resolved and dynamic phase is fitted with a suitable model. Two parameters of this model, related to amplification efficiency, are then used for calculation of the Z-score statistics. Each studied sample is compared to a predefined reference set of reactions, typically calibration reactions. A probabilistic decision for each individual Z-score is then used to identify the majority of inhibited reactions in our experiments. We compare this approach to univariate methods using only the sample specific amplification efficiency as reporter of the compatibility. We demonstrate improved identification performance using the multivariate approach compared to the univariate approach. Finally we stress that the performance of the amplification compatibility test as a quality control procedure depends on the quality of the reference set.     

A Quantitative Real-Time PCR Method Using an X-Linked Gene for Sex Typing in Pigs

At present, a wide range of molecular sex-typing protocols in wild and domestic animals are available. In pigs, most of these methods are based on PCR amplification of X–Y homologous genes followed by gel electrophoresis which is time-consuming and in some cases expensive. In this paper, we describe, for the first time, a SYBR green-based quantitative real-time PCR (qPCR) assay using an X-linked gene, the glycoprotein M6B, for genetic sexing of pigs. Taking into account the differences in the glycoprotein M6B gene copy number between genders, we determine the correct sex of 54 pig samples from either diaphragm or hair follicle from different breeds using the 2^?ΔΔCT method for relative quantification. Our qPCR assay represents a quick, inexpensive, and reliable tool for sex determination in pigs. This new protocol could be easily adapted to other species in which the sex determination was required.     

Specific PCR-based detection of Alternaria helianthi: the cause of blight and leaf spot in sunflower

Alternaria helianthi is an important seed-borne pathogenic fungus responsible for blight disease in sunflower. The current detection methods, which are based on culture and morphological identification, are time-consuming, laborious and are not always reliable. A PCR-based diagnostic method was developed with species-specific primers designed based on the sequence data of a region consisting of the 5.8S RNA gene and internal transcribed spacers—ITS 1 and ITS 2 of nuclear ribosomal RNA gene (rDNA) repeats of A. helianthi. The specificity of the primer pairs AhN1F and AhN1R designed was verified by PCR analysis of DNA from 18 Alternaria helianthi strains isolated from India, 14 non-target Alternaria spp. and 11 fungal isolates of other genera. A single amplification product of 357-bp was detected from DNA of A. helianthi isolates. No cross-reaction was observed with any of the other isolates tested. The detection limit of the PCR method was of 10?pg from template DNA. The primers could also detect the pathogen in infected sunflower seed. This species-specific PCR method provides a quick, simple, powerful and reliable alternative to conventional methods in the detection and identification of A. helianthi. This is the first report of an A. helianthi-specific primer set.     

Novel cost-efficient real-time PCR assays for detection and quantitation of Listeria monocytogenes

Listeriosis is a serious food-borne infection with mortality rates approaching 30%. Therefore, the rapid, cost-effective, and automated detection of Listeria monocytogenes throughout the food chain continues to be a major concern. Here we describe three novel quantitative real-time PCR assays for L. monocytogenes based on amplification of a target hlyA gene with SYBR Green I chemistry and hydrolysis probe (TaqMan MGB probe). In order to offer sensitive, rapid and robust tool of additional economical value the real-time PCR assays were designed and optimized to only 5 μl-reactions. All assays were evaluated by using different non-reference Listeria strains isolated from various food matrices. Results demonstrated specificity to L. monocytogenes with accurate quantification over a dynamic range of 5-6 log units with R² higher than 0.98 and amplification efficiencies reaching above 92%. The detection and quantification limits were as low as 165 genome equivalents. Comparison of novel assays to commercially available TaqMan® Listeria monocytogenes Detection Kit and previously published studies revealed similar specificity, sensitivity and efficiency, but greater robustness and especially cost-efficiency in the view of smaller reaction volumes and continuous increase in sample throughput.     

Quantification of Pseudomonas fluorescens strains F113, CHA0 and Pf153 in the rhizosphere of maize by strain-specific real-time PCR unaffected by the variability of DNA extraction efficiency

Pseudomonas fluorescens strains F113 and CHA0 are well-known plant growth-promoting rhizobacteria (PGPR) often used as model strains in biocontrol experiments. To monitor their persistence in large scale field experiments, culture-independent methods are needed. In this study, a strain-specific real-time PCR quantification tool was developed based on sequence-characterized amplified regions (SCAR) for P. fluorescens strains F113, CHA0 and Pf153. Differences in DNA extraction efficiencies from rhizosphere samples were circumvented using plasmid APA9 as internal standard to normalize C_T values after real-time amplification. The detection limits of the real-time PCR assays for all three strains were approximately 10 cells for genomic DNA and 10⁴ cells/g rhizosphere for maize samples grown in different natural soils. Population sizes of the three strains in the rhizosphere of maize measured by the new real-time PCR approaches were similar to those measured by most probable number (MPN)-PCR. A persistence study of the three strains indicated that the strains persisted differently over a period of 5 weeks. In conclusion the newly developed real-time PCR approach is a fast and resource efficient method for monitoring individual biocontrol strains in natural soil, which makes it an apt quantification tool for future large-scale field experiments.     

Locked Nucleic Acid Probe-Based Real-Time PCR Assay for the Rapid Detection of Rifampin-Resistant Mycobacterium tuberculosis

Drug-resistant Mycobacterium tuberculosis can be rapidly diagnosed through nucleic acid amplification techniques by analyzing the variations in the associated gene sequences. In the present study, a locked nucleic acid (LNA) probe-based real-time PCR assay was developed to identify the mutations in the rpoB gene associated with rifampin (RFP) resistance in M. tuberculosis. Six LNA probes with the discrimination capability of one-base mismatch were designed to monitor the 23 most frequent rpoB mutations. The target mutations were identified using the probes in a “probe dropout” manner (quantification cycle = 0); thus, the proposed technique exhibited superiority in mutation detection. The LNA probe-based real-time PCR assay was developed in a two-tube format with three LNA probes and one internal amplification control probe in each tube. The assay showed excellent specificity to M. tuberculosis with or without RFP resistance by evaluating 12 strains of common non-tuberculosis mycobacteria. The limit of detection of M. tuberculosis was 10 genomic equivalents (GE)/reaction by further introducing a nested PCR method. In a blind validation of 154 clinical mycobacterium isolates, 142/142 (100%) were correctly detected through the assay. Of these isolates, 88/88 (100%) were determined as RFP susceptible and 52/54 (96.3%) were characterized as RFP resistant. Two unrecognized RFP-resistant strains were sequenced and were found to contain mutations outside the range of the 23 mutation targets. In conclusion, this study established a sensitive, accurate, and low-cost LNA probe-based assay suitable for a four-multiplexing real-time PCR instrument. The proposed method can be used to diagnose RFP-resistant tuberculosis in clinical laboratories.     

Validation of DNA and RNA real-time assays for food analysis using the hilA gene of Salmonella enterica serovars

In Europe, alternative methods for the detection of food-borne pathogens can be used instead of the standard ISO/CEN reference protocol, if validated according to the protocol outlined in ISO 16140, 2003. In this study, the performance of two novel methods for the detection of Salmonella sp. using real-time PCR technology in tandem with an adapted two-step enrichment protocol were assessed and validated against a reference culture method, ISO 6579, 2004. The DNA and RNA real-time PCR assays amplified a 270 bp region of the hilA gene of Salmonella enterica serovars, and incorporated an internal amplification control (IAC) which was co-amplified with the hilA gene to monitor potential PCR inhibitors and ensure successful amplification. The inclusivity and exclusivity of the hilA primer set was examined for both the DNA and RNA methods and detected the 30 S. enterica serovars but not the 30 non-salmonellae strains. The inoculation of meat carcass swabs with five different S. enterica serovars at five different inocula, indicated both PCR methods were able to detect between 1 and 10 CFU per carcass swab. The real-time DNA PCR assay performed as well as the traditional cultural method in detecting Salmonella sp. in artificially contaminated salad, chocolate, fish and cheese samples. The relative accuracy, relative sensitivity and relative specificity of the DNA PCR real-time method were determined to be 98.5, 98.1 and 100%, respectively. The DNA method was further validated in a collaborative inter-laboratory trial according to ISO 16140, 2003. The validated methods provide an accurate means for the rapid detection and tracking of S. enterica serovars giving equivalent results to the standard method within three days, thus providing an alternative testing method to the reference microbiological method. The real-time PCR methodology not only offers significant time-saving advantages compared to traditional methods, it can also be applied to a wide range of samples types.     

Real-time quantitative PCR assay for analysis of platelet glycoprotein IIIa gene expression

A quantitative detection assay for analysis of platelet glycoprotein GPIIIa gene expression is presented. The assay uses two fluorescently labeled TaqMan MGB probes to detect the polymorphic site in GPIIIa nucleotide sequence, leading to antigens HPA-1a and HPA-1b. In order to avoid the influence of DNA contamination on RNA quantification, a forward primer was constructed to span an exon-exon junction. The assay is therefore applicable to expression studies also in samples containing only a small amount of contaminating DNA. To standardize the amount of sample cDNA added to the reaction, amplification of endogenous control 18SrRNA was included in a separate well. The amplification validation experiment showed a high real-time PCR efficiency for HPA-1a, HPA-1b and 18SrRNA. Relative quantification was therefore performed using the comparative C(T) method. The assay was optimized on a reversely transcribed total RNA from platelets, and the specificity rate was determined by sequencing. The amount of cDNA at which amplification was still clearly detectable was 5 ng. This newly developed real-time quantitative PCR assay is a sensitive, reproducible and reliable method. It is suitable for studying different stages of megakaryopoiesis, monitoring molecular alteration in defective platelets and determining differences in the GPIIIa expression level between normal and pathological megakaryocytic differentiation pathways.     

Kinetic Outlier Detection (KOD) in real-time PCR

Real-time PCR is becoming the method of choice for precise quantification of minute amounts of nucleic acids. For proper comparison of samples, almost all quantification methods assume similar PCR efficiencies in the exponential phase of the reaction. However, inhibition of PCR is common when working with biological samples and may invalidate the assumed similarity of PCR efficiencies. Here we present a statistical method, Kinetic Outlier Detection (KOD), to detect samples with dissimilar efficiencies. KOD is based on a comparison of PCR efficiency, estimated from the amplification curve of a test sample, with the mean PCR efficiency of samples in a training set. KOD is demonstrated and validated on samples with the same initial number of template molecules, where PCR is inhibited to various degrees by elevated concentrations of dNTP; and in detection of cDNA samples with an aberrant ratio of two genes. Translating the dissimilarity in efficiency to quantity, KOD identifies outliers that differ by 1.3–1.9-fold in their quantity from normal samples with a P-value of 0.05. This precision is higher than the minimal 2-fold difference in number of DNA molecules that real-time PCR usually aims to detect. Thus, KOD may be a useful tool for outlier detection in real-time PCR.     

DNA analysis with multiplex microarray-enhanced PCR

We have developed a highly sensitive method for DNA analysis on 3D gel element microarrays, a technique we call multiplex microarray-enhanced PCR (MME-PCR). Two amplification strategies are carried out simultaneously in the reaction chamber: on or within gel elements, and in bulk solution over the gel element array. MME-PCR is initiated by multiple complex primers containing gene-specific, forward and reverse, sequences appended to the 3′ end of a universal amplification primer. The complex primer pair is covalently tethered through its 5′ end to the polyacryl- amide backbone. In the bulk solution above the gel element array, a single pair of unattached universal primers simultaneously directs pseudo-monoplex PCR of all targets according to normal solution-phase PCR. The presence of a single universal PCR primer pair in solution accelerates amplification within gel elements and eliminates the problem of primer interference that is common to conventional multiplex PCR. We show 10⁶-fold amplification of targeted DNA after 50 cycles with average amplification efficiency 1.34 per cycle, and demonstrate specific on-chip amplification of six genes in Bacillus subtilis. All six genes were detected at 4.5 pg of bacterial genomic DNA (equivalent to 10³ genomes) in 60 independent amplification reactions performed simultaneously in single reaction chamber.     

Real-time quantitative PCR for enteric adenovirus serotype 40 in environmental waters

Adenoviruses 40 and 41 have been recognized as important etiological agents of gastroenteritis in children. A real-time PCR method (TaqMan assay) was developed for rapid quantification of adenovirus 40 (Ad40) by amplifying an 88 bp sequence from the hexon gene. To establish a quantification standard curve, a 1090 bp hexon region of Ad40 was amplified and cloned into the pGEM-T Vector. A direct correlation was observed between the fluorescence threshold cycle number (Ct) and the starting quantity of Ad40 hexon gene. The quantification was linear over 6-log units and the amplification efficiency averaged greater than 95%. Seeding studies using various environmental matrices (including sterile water, creek water, brackish estuarine water, ocean water, and secondary sewage effluent) suggest that this method is applicable to environmental samples. However, real-time PCR was sensitive to inhibitors present in the environmental samples. Lower efficiency of PCR amplification was found in secondary sewage effluent and creek waters. Application of the method to fecal contaminated waters successfully quantified the presence of Ad40. The sensitivity of the real-time PCR is comparable to the traditional nested PCR assay for environmental samples. In addition, the real-time PCR assay offers the advantage of speed and insensitivity to contamination during PCR set up. The real-time PCR assay developed in this study is suitable for quantitative determination of Ad40 in environmental samples and represents a considerable advancement in pathogen quantification in aquatic environments.     

Quantification of Rice Blast Disease Progressions Through Taqman Real-Time PCR

Rice blast caused by Magnaporthe oryzae is a major disease in the paddy field and also a representative model system in the investigation of plant–microbe interactions. This study was undertaken to provide the quantitative evaluation method that specifically determines the amount of M. oryzae proliferation in planta. Real-time PCR was used as the detection strategy in combination with the primer pair and Taqman probe specific to MHP1, a unigene encoding HYDROPHOBIN that is indispensable for normal virulence expression. Based on the crossing point values from the PCR reactions containing a series of increasing concentration of cloned amplicon or fungal genomic DNA, correlation among the template’s copy number or its amount and amplification pattern was calculated. Reliability of this equation was further confirmed using the DNA samples from the rice leaves infected with compatible or incompatible strains of M. oryzae. The primer pair used in the Taqman real-time PCR reaction can recognize the existence of fungal DNA as low as 1 pg. In sum, our quantitative evaluation system is applicable and reliable in the blast diagnosis and also in the estimation of objective blast disease progression.     

New Molecular Screening Tools for Analysis of Free-Living Diazotrophs in Soil

Free-living nitrogen-fixing prokaryotes (diazotrophs) are ubiquitous in soil and are phylogenetically and physiologically highly diverse. Molecular methods based on universal PCR detection of the nifH marker gene have been successfully applied to describe diazotroph populations in the environment. However, the use of highly degenerate primers and low-stringency amplification conditions render these methods prone to amplification bias, while less degenerate primer sets will not amplify all nifH genes. We have developed a fixed-primer-site approach with six PCR protocols using less degenerate to nondegenerate primer sets that all amplify the same nifH fragment as a previously published PCR protocol for universal amplification. These protocols target different groups of diazotrophs and allowed for direct comparison of the PCR products by use of restriction fragment length polymorphism fingerprinting. The new protocols were optimized on DNA from 14 reference strains and were subsequently tested with bulk DNA extracts from six soils. These analyses revealed that the new PCR primer sets amplified nifH sequences that were not detected by the universal primer set. Furthermore, they were better suited to distinguish between diazotroph populations in the different soils. Because the novel primer sets were not specific for monophyletic groups of diazotrophs, they do not serve as an identification tool; however, they proved powerful as fingerprinting tools for subsets of soil diazotroph communities.     

Efficiency clustering for low-density microarrays and its application to QPCR

Background  

Pathway-targeted or low-density arrays are used more and more frequently in biomedical research, particularly those arrays that are based on quantitative real-time PCR. Typical QPCR arrays contain 96-1024 primer pairs or probes, and they bring with it the promise of being able to reliably measure differences in target levels without the need to establish absolute standard curves for each and every target. To achieve reliable quantification all primer pairs or array probes must perform with the same efficiency.     

Quantitative real-time PCR (qPCR) detection chemistries affect enumeration of the Dehalococcoides 16S rRNA gene in groundwater

Quantitative real-time PCR (qPCR) commonly uses the fluorogenic 5′ nuclease (TaqMan) and SYBR Green I (SG) detection chemistries to enumerate biomarker genes. Dehalococcoides (Dhc) are keystone bacteria for the detoxification of chlorinated ethenes, and the Dhc 16S ribosomal RNA (rRNA) gene serves as a biomarker for monitoring reductive dechlorination in contaminated aquifers. qPCR enumeration of Dhc biomarker genes using the TaqMan or SG approach with the same primer set yielded linear calibration curves over a seven orders of magnitude range with similar amplification efficiencies. The TaqMan assay discriminates specific from nonspecific amplification observed at low template concentrations with the SG assay, and had a 10-fold lower limit of detection of ~3 copies per assay. When applied to Dhc pure cultures and Dhc-containing consortia, both detection methods enumerated Dhc biomarker genes with differences not exceeding 3-fold. Greater variability was observed with groundwater samples, and the SG chemistry produced false-positive results or yielded up to 6-fold higher biomarker gene abundances compared to the TaqMan method. In most cases, the apparent error associated with SG detection resulted from quantification of nonspecific amplification products and was more pronounced with groundwater samples that had low biomarker concentrations or contained PCR inhibitors. Correction of the apparent error using post-amplification melting curve analysis produced 2 to 21-fold lower abundance estimates; however, gel electrophoretic analysis of amplicons demonstrated that melting curve analysis was insufficient to recognize all nonspecific amplification. Upon exclusion of nonspecific amplification products identified by combined melting curve and electrophoretic amplicon analyses, the SG method produced false-negative results compared to the TaqMan method. To achieve sensitive and accurate quantification of Dhc biomarker genes in environmental samples (e.g., groundwater) and avoid erroneous conclusions, the analysis should rely on TaqMan detection chemistry, unless additional analyses validate the results obtained with the SG approach.     

Use of 5´-anchored primers for the enhanced recovery of specific microsatellite markers in Brassica napus L.

Microsatellite markers have assumed great significance in biological research. The isolation and characterisation of microsatellites involves DNA library construction and screening, DNA sequencing, primer design and PCR optimisation. When a microsatellite is situated close to the beginning or end of a cloned fragment, specific primers cannot be designed for one of the flanking sequences, thus hindering the utilisation of such microsatellites as markers. The present approach was to use one 5′-anchored primer complementary to the microsatellite sequence in combination with one specific Cy5- labelled primer with a view to retrieving useful microsatellites, which would otherwise be lost. Six pairs of a 5′ anchored primer and a specific primer were used across a set of 31 Brassica napus winter cultivars and one accession each of five additional Brassica species. Using laser fluorometry a single labelled product was observed after amplification with each of four primer pairs, and one primer pair gave two labelled products. Three products corresponded in size with the products expected if 5′ anchoring was effective, indicating the amplification of locus-specific full-length products including all of the microsatellite repeats. All six primer pairs showed polymorphisms across the Brassica species examined, but only one primer pair showed polymorphisms within B. napus, making it useful for genetic analysis in rapeseed cultivars. The other primer pairs could be useful in studying gene introgression into B. napus or for investigating interspecific crosses involving different Brassica species. Received: 5 August 1999 / Accepted: 1 November 1999     

Quantification of Endospore-Forming Firmicutes by Quantitative PCR with the Functional Gene spo0A

Bacterial endospores are highly specialized cellular forms that allow endospore-forming Firmicutes (EFF) to tolerate harsh environmental conditions. EFF are considered ubiquitous in natural environments, in particular, those subjected to stress conditions. In addition to natural habitats, EFF are often the cause of contamination problems in anthropogenic environments, such as industrial production plants or hospitals. It is therefore desirable to assess their prevalence in environmental and industrial fields. To this end, a high-sensitivity detection method is still needed. The aim of this study was to develop and evaluate an approach based on quantitative PCR (qPCR). For this, the suitability of functional genes specific for and common to all EFF were evaluated. Seven genes were considered, but only spo0A was retained to identify conserved regions for qPCR primer design. An approach based on multivariate analysis was developed for primer design. Two primer sets were obtained and evaluated with 16 pure cultures, including representatives of the genera Bacillus, Paenibacillus, Brevibacillus, Geobacillus, Alicyclobacillus, Sulfobacillus, Clostridium, and Desulfotomaculum, as well as with environmental samples. The primer sets developed gave a reliable quantification when tested on laboratory strains, with the exception of Sulfobacillus and Desulfotomaculum. A test using sediment samples with a diverse EFF community also gave a reliable quantification compared to 16S rRNA gene pyrosequencing. A detection limit of about 10⁴ cells (or spores) per gram of initial material was calculated, indicating this method has a promising potential for the detection of EFF over a wide range of applications.