Enhanced Cutinase-Catalyzed Hydrolysis of Polyethylene Terephthalate by Covalent Fusion to Hydrophobins

Cutinases have shown potential for hydrolysis of the recalcitrant synthetic polymer polyethylene terephthalate (PET). We have shown previously that the rate of this hydrolysis can be enhanced by the addition of hydrophobins, small fungal proteins that can alter the physicochemical properties of surfaces. Here we have investigated whether the PET-hydrolyzing activity of a bacterial cutinase from Thermobifida cellulosilytica (Thc_Cut1) would be further enhanced by fusion to one of three Trichoderma hydrophobins, i.e., the class II hydrophobins HFB4 and HFB7 and the pseudo-class I hydrophobin HFB9b. The fusion enzymes exhibited decreased k_cat values on soluble substrates (p-nitrophenyl acetate and p-nitrophenyl butyrate) and strongly decreased the hydrophilicity of glass but caused only small changes in the hydrophobicity of PET. When the enzyme was fused to HFB4 or HFB7, the hydrolysis of PET was enhanced >16-fold over the level with the free enzyme, while a mixture of the enzyme and the hydrophobins led only to a 4-fold increase at most. Fusion with the non-class II hydrophobin HFB9b did not increase the rate of hydrolysis over that of the enzyme-hydrophobin mixture, but HFB9b performed best when PET was preincubated with the hydrophobins before enzyme treatment. The pattern of hydrolysis by the fusion enzymes differed from that of Thc_Cut1 as the concentration of the product mono(2-hydroxyethyl) terephthalate relative to that of the main product, terephthalic acid, increased. Small-angle X-ray scattering (SAXS) analysis revealed an increased scattering contrast of the fusion proteins over that of the free proteins, suggesting a change in conformation or enhanced protein aggregation. Our data show that the level of hydrolysis of PET by cutinase can be significantly increased by fusion to hydrophobins. The data further suggest that this likely involves binding of the hydrophobins to the cutinase and changes in the conformation of its active center.     

The pleiotropic functions of intracellular hydrophobins in aerial hyphae and fungal spores

Higher fungi can rapidly produce large numbers of spores suitable for aerial dispersal. The efficiency of the dispersal and spore resilience to abiotic stresses correlate with their hydrophobicity provided by the unique amphiphilic and superior surface-active proteins–hydrophobins (HFBs)–that self-assemble at hydrophobic/hydrophilic interfaces and thus modulate surface properties. Using the HFB-enriched mold Trichoderma (Hypocreales, Ascomycota) and the HFB-free yeast Pichia pastoris (Saccharomycetales, Ascomycota), we revealed that the rapid release of HFBs by aerial hyphae shortly prior to conidiation is associated with their intracellular accumulation in vacuoles and/or lipid-enriched organelles. The occasional internalization of the latter organelles in vacuoles can provide the hydrophobic/hydrophilic interface for the assembly of HFB layers and thus result in the formation of HFB-enriched vesicles and vacuolar multicisternal structures (VMSs) putatively lined up by HFBs. These HFB-enriched vesicles and VMSs can become fused in large tonoplast-like organelles or move to the periplasm for secretion. The tonoplast-like structures can contribute to the maintenance of turgor pressure in aerial hyphae supporting the erection of sporogenic structures (e.g., conidiophores) and provide intracellular force to squeeze out HFB-enriched vesicles and VMSs from the periplasm through the cell wall. We also show that the secretion of HFBs occurs prior to the conidiation and reveal that the even spore coating of HFBs deposited in the extracellular matrix requires microscopic water droplets that can be either guttated by the hyphae or obtained from the environment. Furthermore, we demonstrate that at least one HFB, HFB4 in T. guizhouense, is produced and secreted by wetted spores. We show that this protein possibly controls spore dormancy and contributes to the water sensing mechanism required for the detection of germination conditions. Thus, intracellular HFBs have a range of pleiotropic functions in aerial hyphae and spores and are essential for fungal development and fitness.     

Cutinase and hydrophobin interplay: A herald for pathogenesis?

Surface-penetrating phytopathogenic fungi frequently form appressoria. These are specialised infection structures pivotal to fungal ingress into the host. Recently, we demonstrated that one member of a family of cutinases in Magnaporthe grisea is involved in surface sensing, mediating appressorium differentiation and penetration peg formation and hence facilitates host penetration. Cutinase2 serves as an upstream activator of cAMP/PKA and DAG/PKC signalling cascades and is essential for full virulence. Here, we speculate on the role of rice blast hydrophobins as surface interactors facilitating fungal cutinase activity.Key words: rice blast fungus, appressorium, cutinase, hydrophobin, penetration, surface sensing, signalling     

Hydrophobins from <Emphasis Type="Italic">Aspergillus</Emphasis> species cannot be clearly divided into two classes

Background

Hydrophobins are a family of small secreted proteins with a characteristic pattern of eight cysteine residues found exclusively in filamentous fungi. They have originally been divided into two classes based on their physical properties and hydropathy patterns, and are involved in the attachment of hyphae to hydrophobic structures, the formation of aerial structures and appear to be involved in pathogenicity.

Findings

Analysis of nine genome sequences from seven Aspergilli revealed fifty hydrophobins, where each species displayed between two to eight hydrophobins. Twenty of the identified hydrophobins have not previously been described from these species. Apart from the cysteines, very little amino acid sequence homology was observed. Twenty-three of the identified hydrophobins could be classified as class I hydrophobins based on their conserved cysteine spacing pattern and hydropathy pattern. However twenty-six of the identified hydrophobins were intermediate forms. Notably, a single hydrophobin, ATEG_04730, from Aspergillus terreus displayed class II cysteine spacing and had a class II hydropathy pattern.

Conclusion

Fifty hydrophobins were identified in Aspergillus, all containing the characteristic eight cysteine pattern. Aspergillus terreus exhibited both class I and class II hydrophobins. This is the first report of an Aspergillus species with the potential to express both class I and class II hydrophobins. Many of the identified hydrophobins could not directly be allocated to either class I or class II.

     

Novel Hydrophobins from <Emphasis Type="Italic">Trichoderma</Emphasis> Define a New Hydrophobin Subclass: Protein Properties,Evolution, Regulation and Processing

Hydrophobins are small proteins, characterised by the presence of eight positionally conserved cysteine residues, and are present in all filamentous asco- and basidiomycetes. They are found on the outer surfaces of cell walls of hyphae and conidia, where they mediate interactions between the fungus and the environment. Hydrophobins are conventionally grouped into two classes (class I and II) according to their solubility in solvents, hydropathy profiles and spacing between the conserved cysteines. Here we describe a novel set of hydrophobins from Trichoderma spp. that deviate from this classification in their hydropathy, cysteine spacing and protein surface pattern. Phylogenetic analysis shows that they form separate clades within ascomycete class I hydrophobins. Using T. atroviride as a model, the novel hydrophobins were found to be expressed under conditions of glucose limitation and to be regulated by differential splicing.     

Biochemical characterization of the cutinases from Thermobifida fusca

Thermobifida fusca produces two cutinases which share 93% identity in amino acid sequence. In the present study, we investigated the detailed biochemical properties of T. fusca cutinases for the first time. For a better comparison between bacterial and fungal cutinases, recombinant Fusarium solani pisi cutinase was subjected to the similar analysis. The results showed that both bacterial and fungal cutinases are monomeric proteins in solution. The bacterial cutinases exhibited a broad substrate specificity against plant cutin, synthetic polyesters, insoluble triglycerides, and soluble esters. In addition, the two isoenzymes of T. fusca and the F. solani pisi cutinase are similar in substrate kinetics, the lack of interfacial activation, and metal ion requirements. However, the T. fusca cutinases showed higher stability in the presence of surfactants and organic solvents. Considering the versatile hydrolytic activity, good tolerance to surfactants, superior stability in organic solvents, and thermostability demonstrated by T. fusca cutinases, they may have promising applications in related industries.     

Differential Regulation and Posttranslational Processing of the Class II Hydrophobin Genes from the Biocontrol Fungus Hypocrea atroviridis

Hydrophobins are small extracellular proteins, unique to and ubiquitous in filamentous fungi, which mediate interactions between the fungus and environment. The mycoparasitic fungus Hypocrea atroviridis has recently been shown to possess 10 different class II hydrophobin genes, which is a much higher number than that of any other ascomycete investigated so far. In order to learn the potential advantage of this hydrophobin multiplicity for the fungus, we have investigated their expression patterns under different physiological conditions (e.g., vegetative growth), various conditions inducing sporulation (light, carbon starvation, and mechanical injury-induced stress), and confrontation with potential hosts for mycoparasitism. The results show that the 10 hydrophobins display different patterns of response to these conditions: one hydrophobin (encoded by hfb-2b) is constitutively induced under all conditions, whereas other hydrophobins were formed only under conditions of carbon starvation (encoded by hfb-1c and hfb-6c) or light plus carbon starvation (encoded by hfb-2c, hfb-6a, and hfb-6b). The hydrophobins encoded by hfb-1b and hfb-5a were primarily formed during vegetative growth and under mechanical injury-provoked stress. hfb-22a was not expressed under any conditions and is likely a pseudogene. None of the 10 genes showed a specific expression pattern during mycoparasitic interaction. Most, but not all, of the expression patterns under the three different conditions of sporulation were dependent on one or both of the two blue-light regulator proteins BLR1 and BLR2, as shown by the use of respective loss-of-function mutants. Matrix-assisted laser desorption ionization-time of flight mass spectrometry of mycelial solvent extracts provided sets of molecular ions corresponding to HFB-1b, HFB-2a, HFB-2b, and HFB-5a in their oxidized and processed forms. These in silico-deduced sequences of the hydrophobins indicate cleavages at known signal peptide sites as well as additional N- and C-terminal processing. Mass peaks observed during confrontation with plant-pathogenic fungi indicate further proteolytic attack on the hydrophobins. Our study illustrates both divergent and redundant functions of the 10 hydrophobins of H. atroviridis.Hydrophobins are unique and ubiquitous small proteins, characterized by the presence of eight positionally conserved cysteine residues, and present in all multicellular asco- and basidiomycetes. According to their hydropathy profiles and spacing between the conserved cysteines (37), they are divided into two classes (class I and class II). Hydrophobins are secreted proteins, found on the outer surfaces of the cell walls of hyphae and conidia, where they mediate interactions between the fungus and the environment (18, 24, 37), such as surface recognition during pathogenic interaction with plants, insects, or other fungi, but also in symbiosis (38). In addition, they also influence cell wall composition (33). Because of these manifold roles, it is less surprising that the expression of hydrophobin genes is subject to complex patterns of signals, including those that are related to the triggering of conidiogenesis or indicating the presence of a plant host.Many species of the fungal genus Hypocrea/Trichoderma are known as mycoparasites, and several of them are therefore applied as biocontrol agents (6, 7, 36). In addition, Trichoderma spp. have recently been reported to occur as endophytes and to be able to elicit positive plant responses against potential pathogens (17). Because of the reasons given above, hydrophobins would be candidate proteins playing a role in this process, and in fact a class I hydrophobin gene has recently been reported to be overproduced during endophytic interaction of Trichoderma asperellum and cucumber roots (35). In addition, other hydrophobins may be involved in the mechanism of mycoparasitism itself as well as the colonization of decaying wood.Our information about the roles of hydrophobins in the physiology of Trichoderma as well as other ascomycetous fungi is mostly derived from reversed genetics of a few major members (3, 4, 19-22). In Hypocrea jecorina (= Trichoderma reesei), two major class II hydrophobins (HFB-1 and HFB-2) have been studied in detail (4) and shown to be formed under different physiological conditions (29). However, the genome sequence of H. jecorina contains six class II hfb genes (27), and the roles of HFB-3, HFB-4, HFB-5, and HFB-6 are yet unknown. In the biocontrol fungus Hypocrea atroviridis (formerly called “Trichoderma harzianum”), only a single hydrophobin gene has been characterized so far (srh1 [28]) and shown to be expressed mainly under conditions of sporulation. Consequently, very little is known about hydrophobins and their regulation in Trichoderma.We have recently reported that two species of the Trichoderma/Hypocrea genus, Hypocrea virens and Hypocrea atroviridis, have an exceptional high number of class II hydrophobin genes (i.e., 11 and 10 phylogenetically different genes, respectively [22]). Therefore, the objective of this work was to investigate whether all of them are in fact expressed and, if so, under which conditions. We thereby put emphasis on vegetative growth, mycoparasitic interaction, and different triggers of sporulation and on learning whether the sporulation- and stress-regulating proteins BLR1 and BLR2 (10, 15) play a role in this process.In addition, we used matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry to detect the respective proteins and to learn their mode of processing. It has previously been shown that direct solvent extraction of mycelia and spores of Ascomycetes in the process of sample preparation provides a small set of protein peaks in the range of 5,000 to 10,000 Da representing the hydrophobin inventory (27). Structural studies of hydrophobins from H. jecorina (2, 20, 30, 31), Schizophyllum commune (13), and Agaricus bisporus (26) have shown expected signal peptide cleavage but also unusual processing patterns, including cleavage after Arg and Pro, as well as C-terminal modification.     

Purifying selection and birth-and-death evolution in the class II hydrophobin gene families of the ascomycete <Emphasis Type="Italic">Trichoderma/Hypocrea</Emphasis>

Background  

Hydrophobins are proteins containing eight conserved cysteine residues that occur uniquely in mycelial fungi. Their main function is to confer hydrophobicity to fungal surfaces in contact with air or during attachment of hyphae to hydrophobic surfaces of hosts, symbiotic partners or themselves resulting in morphogenetic signals. Based on their hydropathy patterns and solubility characteristics, hydrophobins are divided into two classes (I and II), the latter being found only in ascomycetes.     

Constitutive expression of hydrophobin HFB1 from Trichoderma reesei in Pichia pastoris and its pre‐purification by foam separation during cultivation

Hydrophobins are small surface‐active proteins that have considerable potential for use in applications ranging from medical and technical coatings, separation technologies, biosensors, and personal care. Their wider use would be facilitated by the availability of recombinant tailor‐made hydrophobins. We successfully expressed the class II hydrophobin HFB1 from Trichoderma reesei in Pichia pastoris under the control of the constitutive GAP (glyceraldehyde 3‐phosphate dehydrogenase) promoter. Avoiding the use of the AOX1 (alcohol oxidase 1) promoter prevents the costs and risks associated with the storage and delivery of methanol used as an inducer. Efficient secretion of hydrophobin was achieved using either the alpha‐factor prepro‐peptide or the native secretion signal of HFB1. The secreted hydrophobins have been isolated with a purity of up to 70% using in situ foam separation during the cultivation process. Coating experiments and surface pressure measurements demonstrated the activity of the hydrophobins. An immunodot assay showed the accessibility of carboxyterminally fused tags of the hydrophobin, which is necessary for potential applications using functionalized hydrophobins. The presented data show that Pichia pastoris is a suitable system for production of constitutively expressed and secreted active hydrophobin, allowing for in situ pre‐purification using foam separation.     

MHP1, a Magnaporthe grisea hydrophobin gene, is required for fungal development and plant colonization

Fungal hydrophobins are implicated in cell morphogenesis and pathogenicity in several plant pathogenic fungi including the rice blast fungus Magnaporthe grisea. A cDNA clone encoding a hydrophobin (magnaporin, MHP1) was isolated from a cDNA library constructed from rice leaves infected by M. grisea. The MHP1 codes for a typical fungal hydrophobin of 102 amino acids containing eight cysteine residues spaced in a conserved pattern. Hydropathy analysis of amino acids revealed that MHP1 belongs to the class II group of hydrophobins. The amino acid sequence of MHP1 exhibited about 20% similarity to MPG1, an M. grisea class I hydrophobin. Expression of MHP1 was highly induced during plant colonization and conidiation, but could hardly be detected during mycelial growth. Transformants in which MHP1 was inactivated by targeted gene replacement showed a detergent wettable phenotype, but were not altered in wettability with water. mhp1 mutants also exhibited pleiotropic effects on fungal morphogenesis, including reduction in conidiation, conidial germination, appressorium development and infectious growth in host cells. Furthermore, conidia of mhp1 mutants were defective in their cellular organelles and rapidly lose viability. As a result, mhp1 mutants exhibited a reduced ability to infect and colonize a susceptible rice cultivar. These phenotypes were recovered by re-introduction of an intact copy of MHP1. Taken together, these results indicate that MHP1 has essential roles in surface hydrophobicity and infection-related fungal development, and is required for pathogenicity of M. grisea.     

Hemoglobin regulates the metabolic and synthetic function of rat insulinoma cells cultured in a hollow fiber bioreactor

Pancreatic islet transplantation continues to benefit patients with type 1 diabetes by normalizing glucose metabolism and improving other complications of diabetes. However, islet transplantation therapy is limited by the inadequate availability of pancreatic islets. In order to address this concern, this work investigated the expansion of rat insulinoma cells (INS‐1) and their ability to generate insulin in a hollow fiber bioreactor (HFB). The long‐term goal of this project is to develop a bioartificial pancreas. HFBs were incubated at two different oxygenation conditions (10% and 19% O₂) to determine the best scenario for O₂ transport to cultured cells. Also, bovine hemoglobin (BvHb) was supplemented in the cell culture media of the HFBs in order to increase O₂ transport under both oxygenation conditions. Our results show that INS‐1 cells expanded under all oxygenation conditions after 2 weeks of culture, with a slightly higher cell expansion under normoxic oxygenation (19% O₂) for both control HFBs and BvHb HFBs. In addition, cellular insulin production remained steady throughout the study for normoxic control HFBs and BvHb HFBs, while it increased under hypoxic oxygenation (10% O₂) for both types of HFBs but to different extents. Under the two different oxygenation conditions, cellular insulin production was more uniform with time in BvHb HFBs versus control HFBs. These results, along with qRT‐PCR analysis, suggest a possible dysregulation of the insulin‐signaling pathway under hypoxic culture conditions. In conclusion, the HFB culture system is an environment capable of expanding insulinomas while maintaining their viability and insulin production capabilities. Biotechnol. Bioeng. 2010;107: 582–592. © 2010 Wiley Periodicals, Inc.     

Fungal hydrophobins in medical and technical applications

Class I and class II hydrophobins are small secreted fungal proteins that self-assemble at hydrophilic-hydrophobic interfaces into amphipathic films. Apart from eight conserved cysteine residues, the amino acid sequences between and within both classes have diverged considerably, and this is reflected in the biophysical properties of these proteins. For instance, assemblages of class I hydrophobins are highly insoluble, while those of class II hydrophobins readily dissolve in a variety of solvents. The properties of hydrophobins make them interesting candidates for use in a wide range of medical and technical applications. Each application has its own requirements, which may be met by using specific natural variants of hydrophobins or by modifying hydrophobins chemically or genetically. Applications also require high production systems for hydrophobins. In this respect, filamentous fungi that naturally secrete hydrophobins into the medium seem to be the hosts of choice.     

Purification and characterization of novel cutinase from nasturtium (Tropaeolum majus) pollen.

Cutinase from pollen grains of Tropaeolum majus was purified by Sephadex G-100 gel filtration, QAE-Sephadex chromatography, and isoelectric focusing. The purified enzyme was homogeneous as judged by polyacrylamide gel electrophoresis in the presence and absence of sodium dodecyl sulfate. The molecular weight of the enzyme was estimated to be 40,000 by both Sephadex G-100 gel filtration and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This cutinase was found to be a glycoprotein containing about 7% carbohydrate and the isoelectric point of this enzyme was 5.45. It catalyzed hydrolysis of p-nitrophenyl esters of C₂ to C₁₈ fatty acids with similar K_m and V. The purified cutinase showed an optimum pH of 6.8 with cutin as the substrate, whereas with p-nitrophenyl esters of fatty acids the optimum pH was 8.0. This enzyme did not show any metal ion requirement. Unlike the previously studied fungal cutinases, the present pollen enzyme was strongly inhibited by thiol-directed reagents such as N-ethylmaleimide and p-hydroxymercuribenzoate whereas it was totally insensitive to the active serine-directed reagent, diisopropylfluorophosphate. The purified pollen cutinase showed preference for primary alcohol esters, but it did not catalyze hydrolysis of tripalmitoyl or trioleyl glycerol at significant rates. The properties of the pollen enzyme are, in general, in sharp contrast to those of the fungal cutinase, and the present results strongly suggest that the pollen enzyme belongs to a new class of cutinases. Another esterase which preferentially hydrolyzed p-nitrophenyl acetate was also found in the extracellular fluid. This enzyme, separated from cutinase, showed a pI of 5.6 and it was sensitive to diisopropylfluorophosphate, but not to SH-directed reagents.     

Identification of novel gene clusters for secondary metabolism in <Emphasis Type="Italic">Trichoderma</Emphasis> genomes

Trichoderma species are widely used in agriculture as biofungicides. These fungi are rich source of secondary metabolites and the mycoparasitic species are enriched in genes for biosynthesis of secondary metabolites. Most often, genes for secondary metabolism are clustered in fungal genomes. Previously, no systematic study was undertaken to identify the secondary-metabolism related gene clusters in Trichoderma genomes. In the present study, a survey of the three Trichoderma genomes viz. T. reesei, T. atroviride and T. virens, was made to identify the putative gene clusters associated with secondary metabolism. In T. reesei genome, we identified one new NRPS and 6 new PKS clusters, which is much less than that found in T. atroviride (4 and 8) and T. virens (8 and 7). This work would pave the way for discovery of novel secondary metabolites and pathways in Trichoderma.     

Structural and functional studies on a thermostable polyethylene terephthalate degrading hydrolase from Thermobifida fusca

Bacterial cutinases are promising catalysts for the modification and degradation of the widely used plastic polyethylene terephthalate (PET). The improvement of the enzyme for industrial purposes is limited due to the lack of structural information for cutinases of bacterial origin. We have crystallized and structurally characterized a cutinase from Thermobifida fusca KW3 (TfCut2) in free as well as in inhibitor-bound form. Together with our analysis of the thermal stability and modelling studies, we suggest possible reasons for the outstanding thermostability in comparison to the less thermostable homolog from Thermobifida alba AHK119 and propose a model for the binding of the enzyme towards its polymeric substrate. The TfCut2 structure is the basis for the rational design of catalytically more efficient enzyme variants for the hydrolysis of PET and other synthetic polyesters.     

Significance of the class II hydrophobin FgHyd5p for the life cycle of Fusarium graminearum

Hydrophobins are small secreted proteins ubiquitously found in filamentous fungi. Some hydrophobins were shown to have functions in fungal development, while others lack known function. Class II hydrophobins from Fusarium graminearum and Fusarium culmorum are characterized by formation of low stability aggregates and their solubility in organic solvents. They are economically relevant to the brewing industry because they can induce beer gushing. Since cellular functions of Hyd5p's are still unknown, we analyzed the influence of FgHyd5p on growth and morphology of F. graminearum using FgΔhyd5 knock-out mutants expressing sGFP under the control of the hyd5 promoter and compared them with the performance of the parent wild type strain. Results demonstrate that FgHyd5p does not affect the colony and hyphal morphology. FgHyd5p affects the hydrophobicity of aerial mycelia but had no obvious function in penetration of hyphae through the water air interface. The hydrophobin affects the morphology of conidia, but not their fitness. Different sources of carbon and nitrogen as well as different pH have no effect on the expression of the hyd5 gene, which was demonstrated to be expressed upon growth of F. graminearum on hydrophobic surfaces.     

Synthesis and characteristics of new fluorescent probes based on cardiolipin

New fluorescent lipid probes, cardiolipin derivatives AV12-CL and B7-CL, bearing the residues of 12-(9-anthryl)-11E-dodecenoic and 7-(4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacen-8-yl)heptanoic acid, respectively, have been synthesized by acylation of 1-lysocardiolipin, which had been obtained from bovine heart cardiolipin by enzymatic hydrolysis with bacterial lipase. The resulting probes are intended for the study of protein-anionic phospholipid interactions.     

Screening of commercial enzymes for poly(ethylene terephthalate) (PET) hydrolysis and synergy studies on different substrate sources

Poly(ethylene terephthalate) (PET) is one of the most consumed plastics in the world. The development of efficient technologies for its depolymerization for monomers reuse is highly encouraged, since current recycling rates are still very low. In this study, 16 commercial lipases and cutinases were evaluated for their abilities to catalyze the hydrolysis of two PET samples. Humicola insolens cutinase showed the best performance and was then used in reactions on other PET sources, solely or in combination with the efficient mono(hydroxyethyl terephthalate)-converting lipase from Candida antarctica. Synergy degrees of the final titers of up to 2.2 (i.e., more than double of the concentration when both enzymes were used, as compared to their use alone) were found, with increased terephthalic acid formation rates, reaching a maximum of 59,989 µmol/L (9.36 g/L). These findings open up new possibilities for the conversion of post-consumer PET packages into their minimal monomers, which can be used as drop in at existing industrial facilities.     

Two-stage fungal biopulping for improved enzymatic hydrolysis of wood

A novel two-stage, whole organism fungal biopulping method was examined for increasing the yield of enzymatic hydrolysis of wood into soluble glucose. Liriodendron tulipifera wood chips (1 g) were exposed to liquid culture suspensions of white rot (Ceriporiopsis subvermispora) or brown rot (Postia placenta) fungi and incubated at 28 °C, either alone in single-stage 30 day (one fungal species applied) or two-stage 60 day (both fungal species applied in alternative succession) treatments. Fungi grew in all treatments, but did not significantly decrease the percent carbohydrate content of the wood. Two-stage treatments differed significantly in mass loss depending on order of exposure, suggesting additive or inhibitory fungal interactions occurred. Treatments consisting of C. subvermispora followed by P. placenta exhibited 6 ± 0.5% mass loss and increased the yield of enzymatic hydrolysis by 67-119%. This significant hydrolysis improvement suggests that fungal biopulping technologies could support commercial lignocellulosic ethanol production efforts if further developed.