Quantification and Size-profiling of Extracellular Vesicles Using Tunable Resistive Pulse Sensing

Extracellular vesicles (EVs), including ‘microvesicles’ and ‘exosomes’, are highly abundant in bodily fluids. Recent years have witnessed a tremendous increase in interest in EVs. EVs have been shown to play important roles in various physiological and pathological processes, including coagulation, immune responses, and cancer. In addition, EVs have potential as therapeutic agents, for instance as drug delivery vehicles or as regenerative medicine. Because of their small size (50 to 1,000 nm) accurate quantification and size profiling of EVs is technically challenging.This protocol describes how tunable resistive pulse sensing (tRPS) technology, using the qNano system, can be used to determine the concentration and size of EVs. The method, which relies on the detection of EVs upon their transfer through a nano sized pore, is relatively fast, suffices the use of small sample volumes and does not require the purification and concentration of EVs. Next to the regular operation protocol an alternative approach is described using samples spiked with polystyrene beads of known size and concentration. This real-time calibration technique can be used to overcome technical hurdles encountered when measuring EVs directly in biological fluids.     

Probing the conformational switch of I-motif DNA using tunable resistive pulse sensing

I-motif DNA, which can fold and unfold reversibly in various environments, plays a significant role in DNA nanotechnology and biological functions. Thus, it is of fundamental importance to identify the different conformations of i-motif DNA. Here, we demonstrate that distinct structures of i-motif DNA conjugated to polystyrene spheres can be distinguished through tunable resistive pulse sensing technique. When dispersed in acidic buffer, i-motif DNA coating on polystyrene spheres would fold into quadruplex structure and subsequently induce an apparent increase in the translocation duration time upon passing through a nanopore due to the shielding effect of the surface charge of the nanospheres. However, if the DNA strands don't have conformational changes in acidic buffer, little shift can be observed in the translocation duration time of the DNA functionalized polystyrene spheres. A before-and-after assay was also performed to illustrate the fast speed of i-motif DNA folding using this technique. The successful implementation of tunable resistive pulse sensing to monitor the conformational transition of i-motif DNA provides a potential tool to detect the structural changes of DNA and an alternative approach to study the function of DNA structures.     

Expression and purification of recombinant apolipoprotein A-I Zaragoza (L144R) and formation of reconstituted HDL particles

Apolipoprotein A-I Zaragoza (L144R) (apo A-I Z), has been associated with severe hypoalphalipoproteinemia and an enhanced effect of high density lipoprotein (HDL) reverse cholesterol transport. In order to perform further studies with this protein we have optimized an expression and purification method of recombinant wild-type apo A-I and apo A-I Z and produced mimetic HDL particles with each protein. An pET-45 expression system was used to produce N-terminal His-tagged apo A-I, wild-type or mutant, in Escherichia coli BL21 (DE3) which was subsequently purified by affinity chromatography in non-denaturing conditions. HDL particles were generated via a modified sodium cholate method. Expression and purification of both proteins was verified by SDS-PAGE, MALDI-TOF MS and immunochemical procedures. Yield was 30mg of purified protein (94% purity) per liter of culture. The reconstituted HDL particles checked via non-denaturing PAGE showed high homogeneity in their size when reconstituted both with wild-type apo A-I and apo A-I Z. An optimized system for the expression and purification of wild-type apo A-I and apo A-I Z with high yield and purity grade has been achieved, in addition to their use in reconstituted HDL particles, as a basis for further studies.     

Tangential flow microfiltration and ultrafiltration for human influenza A virus concentration and purification

Large scale purification of viruses and viral vectors for gene therapy applications and viral vaccines is a major separation challenge. Here tangential flow microfiltration and ultrafiltration using flat sheet membranes has been investigated for concentration of human influenza A virus. Ultrafiltration membranes with molecular weight cutoffs of 100 and 300 kDa as well as 0.1, 0.2 and 0.45 microm microfiltration membranes have been tested. The results indicate that use of 300 kDa membranes not only concentrate the virus particles but also lead to a significant removal of host cell proteins and DNA in the permeate. Tangential flow filtration may be used to fractionate virus particles. Human influenza A virus particles are spherical with an average size of 100 nm. Use of a 0.1 microm membrane leads to passage of virus particles less than 100 nm into the permeate and an increase of larger particles in the retentate. These results suggest that control of the transmembrane pressure, membrane pore size and pore size distribution could enable isolation of intact virus particles from damaged virions. Isolation of the virus particles of interest from viral fragments and other particulate matter could result in simplification of subsequent purification steps. Larger pore size membranes such as 0.45 microm that allow the passage of all virus particles may be used to remove host cell fragments. In addition virus particles attached to these fragments will be removed. Careful selection of membrane morphology and operating conditions will be essential in order to maximize the benefit of tangential flow filtration steps in the purification of viral products from cell cultures.     

Role of pulmonary surfactant protein Sp-C dimerization on membrane fragmentation: An emergent mechanism involved in lung defense and homeostasis

Surfactant protein C (SP-C) is a protein present in the pulmonary surfactant system that is involved in the biophysical properties of this lipoprotein complex, but it also has a role in lung defense and homeostasis. In this article, we propose that the link between both functions could rely on the ability of SP-C to induce fragmentation of phospholipid membranes and generate small vesicles that serve as support to present different ligands to cells in the lungs. Our results using bimolecular fluorescence complementation and tunable resistive pulse sensing setups suggest that SP-C oligomerization could be the triggering event that causes membrane budding and nanovesiculation. As shown by fluorescence microscopy and flow cytometry, these vesicles are differentially assimilated by alveolar macrophages and alveolar type II cells, indicating distinct roles of these alveoli-resident cells in the processing of the SP-C- induced vesicles and their cargo. These results depict a more accurate picture of the mechanisms of this protein, which could be relevant for the comprehension of pulmonary pathologies and the development of new therapeutic approaches.     

慢病毒载体定量检测方法的研究进展

免疫疗法正在发展成为一种可用于多种恶性肿瘤的有效且侵入性较小的治疗方法。慢病毒载体(Lentiviral vectors,LVs)因其能够稳定地整合相对较大的外源DNA,并且有效地转导分裂细胞和非分裂细胞,已在免疫治疗中显现出巨大潜力。临床应用对慢病毒载体具有较高的质量要求,需要对最终产品进行严格的质量控制以保证其纯度、效力和安全性。其中慢病毒载体的定量检测是产品研发和质控的关键环节之一。文中总结了LVs定量检测的现有方法,包括流式细胞术(Fluorescence activated cell sorter,FACS)、P24酶联免疫法(P24 enzyme-linked immunosorbent assay,P24 ELISA)、实时荧光定量PCR方法 (Real-time fluorescence quantitative polymerase chain reaction,RT-q PCR)、纳米粒子跟踪分析(Nanoparticle tracking analysis,NTA)、可调电阻式脉冲传感(Tunable resistive pulse sensing,TRPS)和病毒计数仪(Virus counter,VC),并对其优缺点进行比较,对发展新的检测方法和存在的挑战进行了展望。     

Comparative Analysis of Technologies for Quantifying Extracellular Vesicles (EVs) in Clinical Cerebrospinal Fluids (CSF)

Extracellular vesicles (EVs) have emerged as a promising biomarker platform for glioblastoma patients. However, the optimal method for quantitative assessment of EVs in clinical bio-fluid remains a point of contention. Multiple high-resolution platforms for quantitative EV analysis have emerged, including methods grounded in diffraction measurement of Brownian motion (NTA), tunable resistive pulse sensing (TRPS), vesicle flow cytometry (VFC), and transmission electron microscopy (TEM). Here we compared quantitative EV assessment using cerebrospinal fluids derived from glioblastoma patients using these methods. For EVs <150 nm in diameter, NTA detected more EVs than TRPS in three of the four samples tested. VFC particle counts are consistently 2–3 fold lower than NTA and TRPS, suggesting contribution of protein aggregates or other non-lipid particles to particle count by these platforms. While TEM yield meaningful data in terms of the morphology, its particle count are consistently two orders of magnitude lower relative to counts generated by NTA and TRPS. For larger particles (>150 nm in diameter), NTA consistently detected lower number of EVs relative to TRPS. These results unveil the strength and pitfalls of each quantitative method alone for assessing EVs derived from clinical cerebrospinal fluids and suggest that thoughtful synthesis of multi-platform quantitation will be required to guide meaningful clinical investigations.     

Study of a synthetic human olfactory receptor 17-4: expression and purification from an inducible mammalian cell line

In order to begin to study the structural and functional mechanisms of olfactory receptors, methods for milligram-scale purification are required. Here we demonstrate the production and expression of a synthetically engineered human olfactory receptor hOR17-4 gene in a stable tetracycline-inducible mammalian cell line (HEK293S). The olfactory receptor gene was fabricated from scratch using PCR-based gene-assembly, which facilitated codon optimization and attachment of a 9-residue bovine rhodopsin affinity tag for detection and purification. Induction of adherent cultures with tetracycline together with sodium butyrate led to hOR17-4 expression levels of approximately 30 microg per 150 mm tissue culture plate. Fos-choline-based detergents proved highly capable of extracting the receptors, and fos-choline-14 (N-tetradecylphosphocholine) was selected for optimal solubilization and subsequent purification. Analysis by SDS-PAGE revealed both monomeric and dimeric receptor forms, as well as higher MW oligomeric species. A two-step purification method of immunoaffinity and size exclusion chromatography was optimized which enabled 0.13 milligrams of hOR17-4 monomer to be obtained at >90% purity. This high purity of hOR17-4 is not only suitable for secondary structural and functional analyses but also for subsequent crystallization trials. Thus, this system demonstrates the feasibility of purifying milligram quantities of the GPCR membrane protein hOR17-4 for fabrication of olfactory receptor-based bionic sensing device.     

Downstream process design for Gag HIV-1 based virus-like particles

Virus-like particles-based vaccines have been gaining interest in recent years. The manufacturing of these particles includes their production by cell culture followed by their purification to meet the requirements of its final use. The presence of host cell extracellular vesicles represents a challenge for better virus-like particles purification, because both share similar characteristics which hinders their separation. The present study aims to compare some of the most used downstream processing technologies for capture and purification of virus-like particles. Four steps of the purification process were studied, including a clarification step by depth filtration and filtration, an intermediate step by tangential flow filtration or multimodal chromatography, a capture step by ion exchange, heparin affinity and hydrophobic interaction chromatography and finally, a polishing step by size exclusion chromatography. In each step, the yields were evaluated by percentage of recovery of the particles of interest, purity, and elimination of main contaminants. Finally, a complete purification train was implemented using the best results obtained in each step. A final concentration of 1.40 × 10¹⁰ virus-like particles (VLPs)/mL with a purity of 64% after the polishing step was achieved, with host cell DNA and protein levels complaining with regulatory standards, and an overall recovery of 38%. This work has resulted in the development of a purification process for HIV-1 Gag-eGFP virus-like particles suitable for scale-up.     

Concentration and purification of rubella virus using monolithic chromatographic support

The production of economically acceptable viral vaccines of high quality requires simple and efficient methods for purification and concentration of viral particles. Ion-exchange chromatography (IEC) has become one of commonly used methods for large-scale downstream purification of viruses. Viruses possess different biological and/or biochemical properties and therefore IEC conditions must be established specifically for each virus. Live attenuated rubella virus vaccines have been manufactured and successfully used widely to protect people from rubella and congenital rubella syndrome for almost 40 years. The aim of this study was to search for an efficient method for concentration and purification of rubella virus using IEC. The selected operating conditions using quaternary amine monolithic supports enabled highly efficient binding, purification and concentration of rubella virus from complex biological suspension without additional procedures. Eluted viral particles maintained their infectivity and viral recovery was almost 100%. At the same time, viral preparation was successfully depleted from host cell protein and DNA. This work indicates the possibility of using monoliths to improve the rubella virus yields in productions where high virus titers during cultivation can hardly be achieved.     

噬菌体phi29末端酶gp16蛋白C端结构域在溶液中的构象分析

噬菌体phi29是一种双链DNA病毒,它的增殖和成熟过程需要将较大的子代DNA包装入一个空间极其有限的新生病毒衣壳中,这一步骤由其转运马达完成.转运马达具有三个部分:头颈连接器蛋白(the connector)、pRNA和ATP水解酶蛋白(gp16).在结构预测中发现gp16蛋白的C端结构域可能与pRNA或DNA结合,但尚未有相关文献可以证明这种相互作用,因此其结构的解析成为研究其功能的关键.本文利用大肠杆菌SUMO表达系统,对噬菌体phi29 gp16蛋白的C端结构域进行重组构建并诱导表达后,通过Ni-NTA亲和层析纯化,再用分子排阻色谱获得高纯度的目的蛋白质单体,纯度达到95%左右.最后用X射线小角散射技术(small angle X-ray scattering)对其构象进行分析,收集小角散射数据,当目的蛋白的浓度为1.3 g/L、所得到的目的蛋白的三维结构与同源蛋白FtsK的晶体结构高度拟合,且通过CRYSOL软件反推计算的曲线与实验曲线高度重合.通过原核表达、纯化及结构分析,成功获得了该结构域在溶液中的状态信息.这一研究不仅为后续关于该结构域的功能研究奠定基础,也为病毒感染的诊断和治疗提供新思路.     

A plant derived multifunctional tool for nanobiotechnology based on Tomato bushy stunt virus

Structure, size, physicochemical properties and production strategies make many plant viruses ideal protein based nanoscaffolds, nanocontainers and nano-building blocks expected to deliver a multitude of applications in different fields such as biomedicine, pharmaceutical chemistry, separation science, catalytic chemistry, crop pest control and biomaterials science. Functionalization of viral nanoparticles through modification by design of their external and internal surfaces is essential to fully exploit the potentiality of these objects. In the present paper we describe the development of a plant derived multifunctional tool for nanobiotechnology based on Tomato bushy stunt virus. We demonstrate the ability of this system to remarkably sustain genetic modifications and in vitro chemical derivatizations of its outer surface, which resulted in the successful display of large chimeric peptides fusions and small chemical molecules, respectively. Moreover, we have defined physicochemical conditions for viral swelling and reversible viral pore gating that we have successfully employed for foreign molecules loading and retention in the inner cavity of this plant virus nanoparticles system. Finally, a production and purification strategy from Nicotiana benthamiana plants has been addressed and optimized.     

A molecular breadboard: Removal and replacement of subunits in a hepatitis B virus capsid

Hepatitis B virus (HBV) core protein is a model system for studying assembly and disassembly of icosahedral structures. Controlling disassembly will allow re‐engineering the 120 subunit HBV capsid, making it a molecular breadboard. We examined removal of subunits from partially crosslinked capsids to form stable incomplete particles. To characterize incomplete capsids, we used two single molecule techniques, resistive‐pulse sensing and charge detection mass spectrometry. We expected to find a binomial distribution of capsid fragments. Instead, we found a preponderance of 3 MDa complexes (90 subunits) and no fragments smaller than 3 MDa. We also found 90‐mers in the disassembly of uncrosslinked HBV capsids. 90‐mers seem to be a common pause point in disassembly reactions. Partly explaining this result, graph theory simulations have showed a threshold for capsid stability between 80 and 90 subunits. To test a molecular breadboard concept, we showed that missing subunits could be refilled resulting in chimeric, 120 subunit particles. This result may be a means of assembling unique capsids with functional decorations.     

Immobilization of diverse foreign proteins in viral polyhedra and potential application for protein microarrays

Cypoviruses are insect viruses that produce a cytoplasmic crystalline particle called the polyhedron in which progeny virions are occluded. The virion structural protein, VP3, is implicated in the occlusion of viral particles into polyhedra. In this study, we determined the amino acid sequence of VP3 required for occlusion of viral particles into polyhedra and proposed that this sequence could be used as an immobilization signal to direct the stable incorporation of foreign proteins into polyhedra. A large-scale survey revealed that the immobilization signal could, in fact, direct the incorporation of a variety of human proteins into polyhedra. Immune reactivity and protein-protein interactions were detected on the surface of polyhedra containing immobilized foreign proteins, and these particles were shown to be highly stabilized against dehydration. We showed that these particles could be arrayed onto a glass slide by standard spotting and laser manipulation methods. Thus, this approach is well suited for protein expression, purification, and the development of protein microarrays.     

Production methods for viral particles

Viral particles and virus-like particles (VLPs) or capsids are becoming important vehicles and templates in bio-imaging, drug delivery and materials sciences. Viral particles are prepared by infecting the host organism but VLPs are obtained from cells that express a capsid protein. Some VLPs are disassembled and then re-assembled to incorporate a material of interest. Cell-free systems, which are amenable to manipulating the viral assembly process, are also available for producing viral particles. Regardless of the production system employed, the particles are functionalized by genetic and/or chemical engineering. Here, we review various methods for producing and functionalizing viral particles and VLPs, and we discuss the merits of each system.     

Tobacco mosaic virus as an AFM tip calibrator

The study of high-resolution topographic surfaces of isolated single molecules is one of the applications of atomic force microscopy (AFM). Since tip-induced distortions are significant in topographic images the exact AFM tip shape must be known in order to correct dilated AFM height images using mathematical morphology operators. In this work, we present a protocol to estimate the AFM tip apex radius using tobacco mosaic virus (TMV) particles. Among the many advantages of TMV, are its non-abrasivity, thermal stability, bio-compatibility with other isolated single molecules and stability when deposited on divalent ion pretreated mica. Compared to previous calibration systems, the advantage of using TMV resides in our detailed knowledge of the atomic structure of the entire rod-shaped particle. This property makes it possible to interpret AFM height images in term of the three-dimensional structure of TMV. Results obtained in this study show that when a low imaging force is used, the tip is sensing viral protein loops whereas at higher imaging force the tip is sensing the TMV particle core. The known size of the TMV particle allowed us to develop a tip-size estimation protocol which permits the successful erosion of tip-convoluted AFM height images. Our data shows that the TMV particle is a well-adapted calibrator for AFM tips for imaging single isolated biomolecules. The procedure developed in this study is easily applicable to any other spherical viral particles.     

Purification of GFP fusion proteins with high purity and yield by monoclonal antibody-coupled affinity column chromatography

GFP has often been used as a marker of gene expression, protein localization in living and fixed tissues as well as for protein targeting in intact cells and organisms. Monitoring foreign protein expression via GFP fusion is also very appealing for bioprocess applications. Many cells, including bacterial, fungal, plant, insect and mammalian cells, can express recombinant GFP (rGFP) efficiently. Several methods and procedures have been developed to purify the rGFP or recombinant proteins fused with GFP tag. However, most current GFP purification methods are limited by poor yields and low purity. In the current study, we developed an improved purification method, utilizing a FMU-GFP.5 monoclonal antibody (mAb) to GFP together with a mAb-coupled affinity chromatography column. The method resulted in a sample that was highly pure (more than 97% homogeneity) and had a sample yield of about 90%. Moreover, the GFP epitope permitted the isolation of almost all the active recombinant target proteins fused with GFP, directly and easily, from the crude cellular sources. Our data suggests this method is more efficient than any currently available method for purification of GFP protein.     

Impact of ligand density on the optimization of ion-exchange membrane chromatography for viral vector purification

The effect of ligand density on anion-exchange membrane chromatography (AEXmc) for the purification of recombinant baculoviruses (rBVs), potential viral vectors in clinical applications, is studied by surface plasmon resonance on customized AEX surfaces and gradient elution experiments on Sartobind D membrane prototypes with different diethylamine ligand densities, complemented by dynamic light scattering analysis for estimation of the hydrodynamic particle size of the various biologics. A chromatographic-column model based on the steric mass action model of ion exchange is employed to analyze the gradient-elution AEXmc experiments, extrapolate the results to other operating conditions, and provide directions for process improvement. Although counterintuitively, the experimental evidence provided in this study shows that the lowering of ligand density is beneficial for rBV purification by AEXmc in bind-and-elute-mode, because it decreases the residual concentrations of host cell protein, dsDNA, and non-infective rBVs in the eluted product cut, and increases the overall yield by roughly 20% over current standard values. Overall, we present a case study on how rational design can streamline downstream process development.     

Two-step method to isolate target recombinant protein from co-purified bacterial contaminant SlyD after immobilised metal affinity chromatography

As part of a study to purify the internal domain of HER2 (ICD) from recombinant expression, through metal immobilised affinity chromatography (IMAC), we encountered a contaminant, SlyD, a 29 kDa native E. coli protein. SlyD is a recurrent contaminant, with a histidine rich domain enabling binding to IMAC columns and thus co-elution with the target protein. Research has been carried out on this protein and its purification, however, no work mentions how to treat it as a true contaminant or describe procedures to isolate it from target proteins. In this report, we described a two-step chromatographic method for the purification of ICD, including IMAC as a capture step and size exclusion chromatography (SEC) as a polishing step. IMAC allowed us to purify ICD from bacterial crude with SlyD co-eluting. SEC then allowed us to resolve ICD from SlyD and achieve a purity greater than 95% for ICD. However, this method has been developed to accommodate any protein whose molecular weight is different enough from SlyD to be separated by SEC.     

Exploiting heparin-binding properties of MoMLV-based retroviral vectors for affinity chromatography

Chromatography is deemed the most promising technology for large-scale purification of viral vectors. The authors have previously shown that heparin affinity chromatography could be successfully employed for the purification of VSV-G pseudotyped Moloney murine leukemia virus (MoMLV)-derived vectors giving excellent results in terms of recovery of active particles, reproducibility and selectivity. In this study, the authors examined whether the ability of retrovirus particles to specifically bind to heparin ligands is restricted to VSV-G pseudotypes produced by 293-based packaging cells. It is shown that VSV-G deficient retrovirus particles are captured by a heparin chromatography column as efficiently as VSV-G containing particles. Most strikingly, RD114 pseudotyped retrovirus particles derived from a HT1080-based cell line were found to bind heparin with the same affinity as 293-derived VSV-G pseudotypes. RD114 pseudotyped retrovirus particles were successfully isolated using heparin affinity chromatography obtaining good recoveries of functional particles (43%). These results indicate that heparin affinity chromatography can be extended to the purification of retroviral vectors produced by different packaging cell lines independently of the Env-protein used for pseudotyping.