Polyionic hydrogels as support for immobilization of lipase

Summary Polyionic hydrogels have been prepared by complexation of chitosan and xanthan. These hydrogels have been used to immobilize lipase from porcine pancreas (E.C. 3.1.1.3). Immobilization efficiency varied between 90 and 99% of initial activity. Immobilized lipase retained its activity towards hydrolysis of olive oil in water as an emulsion and of olive oil in isooctane.     

Rapid deswelling response of poly(N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) hydrogels

Ternary poly( N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) (PNIPAAm/PROZO/PHEMA) hydrogels were prepared by the free-radical copolymerization of N-isopropylacrylamide (NIPAAm), 2-hydroxyethyl methacrylate (HEMA), and poly(2-alkyl-2-oxazoline) (PROZO) multifunctional macromonomers. The resulting polymeric materials were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), as well as by equilibrium swelling experiments. All synthesized hydrogels display temperature sensitivity in the 28-38 degrees C range. A high rate of response was registered as compared to that of materials based only on PNIPAAm. The swelling-deswelling peculiar behavior was related to the chemical composition (hydrophile/hydrophobe balance), the length of the inserted PROZO sequence, and inner morphology, an aspect which points on its possible control by synthesis. It was evidenced that the architecture of the resulting porous materials has a high order degree, emerging from the self-assembling of the microgel particles, which provided numerous, nearly uniform, large water release channels.     

Chitosan-functionalized poly(methyl methacrylate) particles by spinning disk processing for lipase immobilization

Chitosan-functionalized poly(methyl methacrylate) (PMMA-CH) particles were prepared by complexation between the negatively charged PMMA particles and the positively charged chitosan via a spinning disk processing. Processing parameters; feed rate and spinning speed, were optimized, which were traced by size distribution profiles of the formed PMMA-CH particles. Their sizes and net surface charges were found to be affected by MWs of chitosan (45, 100, and 230 kDa) used. Microscopic evidences were used to confirm their core–shell morphology. Chemical characteristics and thermal stability of such particles were determined by FTIR and TGA, respectively. Then, their ability to immobilize lipase (EC 3.1.1.3) was conducted and followed through zeta potential measurement. The percentage of lipase adsorption capacity increased with increasing lipase content, but the value decreased when the size of PMMA-CH particles increased. Also, the activity of lipase attached on PMMA-CH particles’ surface was preserved and increased with lipase loading.     

Covalent-bonded immobilization of lipase on poly(phenylene sulfide) dendrimers and their hydrolysis ability

Covalent-bonded immobilization of lipase from burkholderia cepacia onto two poly(phenylene sulfide) (PPS) dendrimers with different generations (two and three) was achieved using carbodiimide as a coupling reagent. The hydrolysis activity of olive oil to fatty acid was studied on enzyme-immobilized PPS dendrimers. Enzyme activity was proportional to the enzyme loading, and highest recovered activity was obtained at the medium enzyme loading for both G2 and G3 dendrimers. The immobilization improved the optimum pH and caused the temperature range to widen. Immobilization of enzyme has enhanced the thermal stability of enzyme activity in comparison with free enzyme. The immobilized enzyme as a biocatalyst for batch hydrolysis of olive oil retained 80 approximately 90% activity even after 20 times of recycling. This retention of activity after recycle is very valuable and powerful in enzyme technology. The present noteworthy and vital availability on enzyme reaction of the covalently bonded immobilized lipase on dendrimer came from the structure of dendrimer with a large number of functional terminal groups, which are easily available for immobilization of many lipases at the situation keeping reactive enzymes on the surface of dendrimer.     

Binary immobilization of tyrosinase by using alginate gel beads and poly(acrylamide-co-acrylic acid) hydrogels

The use of the immobilized and the stable enzymes has immense potential in the enzymatic analysis of clinical, industrial and environmental samples. However, their widespread uses are limited due to the high cost of their production. In this study, binary immobilization of tyrosinase by using Ca-alginate and poly(acrylamide-co-acrylic acid) [P(AAm-co-AA)] was investigated. Maximum reaction rate (Vmax) and Michaelis-Menten constant (Km) were determined for the free and binary immobilized enzymes. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized tyrosinase were also examined. For the free and binary immobilized enzymes on Ca-alginate and P(AAm-co-AA), optimum pH was found to be 7 and 5, respectively. Optimum temperature of the free and immobilized enzymes was observed to be 30 and 35 degrees C, respectively. Reuse number, storage and thermal stability of the free tyrosinase were increased by a result of binary immobilization.     

Covalent immobilization of lipase from Candida rugosa onto poly(acrylonitrile-co-2-hydroxyethyl methacrylate) electrospun fibrous membranes for potential bioreactor application

A simple way of fabricating enzymatic membrane reactor with high enzyme loading and activity retention from the conjugation between nanofibrous membrane and lipase was devised. Poly(acrylonitrile-co-2-hydroxyethyl methacrylate) (PANCHEMA) was electrospun into fibrous membrane and used as support for enzyme immobilization. The hydroxyl groups on the fibrous membrane surface were activated with epichlorohydrin, cyanuric chloride or p-benzoquinone, respectively. Lipase from Candida rugosa was covalently immobilized on these fibrous membranes. The resulted bioactive fibrous membranes were examined in catalytic efficiency and activity for hydrolysis. The observed enzyme loading on the fibrous membrane with fiber diameter of 80–150 nm was up to 1.6% (wt/wt), which was as thrice as that on the fibrous membrane with fiber diameter of 800–1000 nm. Activity retention for the immobilized lipase varied between 32.5% and 40.6% with the activation methods of hydroxyl groups. Stabilities of the immobilized lipase were obviously improved. In addition, continuous hydrolysis was carried out with an enzyme-immobilized fibrous membrane bioreactor and a steady hydrolysis conversion (3.6%) was obtained at a 0.23 mL/min flow rate under optimum condition.     

Surface modification of nanofibrous poly(acrylonitrile-co-acrylic acid) membrane with biomacromolecules for lipase immobilization

In this work, poly(acrylonitrile-co-acrylic acid) (PANCAA) was electrospun into nanofibers with a mean diameter of 180 nm. To create a biofriendly microenvironment for enzyme immobilization, collagen or protein hydrolysate from egg skin (ES) was respectively tethered on the prepared nanofibrous membranes in the presence of 1-ethyl-3-(dimethyl-aminopropyl) carbodiamine (EDC)/N-hydroxyl succinimide (NHS). Confocal laser scanning microscopy (CLSM) was used to verify the surface modification and protein density on the nanofibrous membranes. Lipase from Candida rugosa was then immobilized on the protein-modified nanofibrous membranes by covalent binding using glutaraldehyde (GA) as coupling agent, and on the nascent PANCAA nanofibrous membrane using EDC/NHS as coupling agent, respectively. The properties of the immobilized enzyme were assayed. It was found that different pre-tethered biomacromolecules had distinct effects on the immobilized enzyme. The activity retention of the immobilized lipase on ES hydrolysate-modified nanofibrous membrane increased from 15.0% to 20.4% compared with that on the nascent one, while it was enhanced up to more than quadrupled (activity retention of 61.7%) on the collagen-modified nanofibrous membrane. The kinetic parameter, K_m and V_max, were also determined for the free and immobilized lipases. Furthermore, the stabilities of the immobilized lipases were obviously improved compared with the free one.     

Synthesis and conformational study of poly(N delta-carbobenzoxy, N delta-benzyl-L-ornithine) and poly(N delta-benzyl-L-ornithine)

Poly(N^δ-carbobenzoxy, N^δ-benzyl-L -ornithine) (PCBLO) was prepared by the standard NCA method. PCBLO was converted into poly(N^δ-benzyl-L -ornithine) (PBLO) through decarbobenzoxylation with hydrogen bromide. The monomer N^δ-benzyl-L -ornithine was synthesized by reacting L -ornithine with benzaldehyde, followed by hydrogenation. The conformation of the two polypeptides was studied by optical rotatory dispersion and circular dichroism. PCBLO forms a right-handed helix in helix-promoting solvents. In mixed solvents of chloroform and dichloroacetic acid (DCA) it undergoes a sharp helix–coil transition at 12% (v/v) DCA at 25°C, as compared with 36% for poly(N^δ-carbobenzoxy-L -ornithine) (PCLO). Like PCLO, the helix–coil transition is “inverse,” that is, high temperature favors the helical form. PBLO is soluble in water at pH below 7 and has a “coiled” conformation. In 88% (v/v) 1-propanol above pH (apparent) 9.6 it is completely helical. In 50% 1-propanol the transition pH (apparent) is about 7.4; this compares with a pH_tr of about 10 for poly-L -ornithine in the same solvent.     

Studies of optimum conditions for covalent immobilization of Candida rugosa lipase on poly(gamma-glutamic acid) by RSM

Poly(gamma-glutamic acid) (gamma-PGA) is a material of polymer. Immobilization of Candida rugosa lipase (Lipase AY-30) by covalent binding on gamma-PGA led to a markedly improved performance of the enzyme. Response surface methodology (RSM) and 3-level-3-factor fractional factorial design were employed to evaluate the effects of immobilization parameters, such as immobilization time (2-6h), immobilization temperature (0-26 degrees C), and enzyme/support ratio (0.1-0.5, w/w). Based on the analysis of ridge max, the optimum immobilization conditions were as follows: immobilization time 2.3h, immobilization temperature 13.3 degrees C, and enzyme/support ratio 0.41 (w/w); the highest lipase activity obtained was 1196 U/mg-protein.     

Developmental toxicity assessment of thermoresponsive poly(N-isopropylacrylamide-co-acrylamide) oligomers in CD-1 mice

BACKGROUND: Although polymers and hydrogels are used successfully in biomedical applications, including implants and drug delivery devices, smaller molecular weight oligomers, such as those investigated here, have not been extensively studied in vivo. Poly(N‐isopropylacrylamide‐co‐acrylamide), or P(NIPAAm‐co‐AAm), has a unique thermoresponsive behavior and is under investigation as a novel drug delivery system for metastatic cancer treatment. To date, no studies have been published regarding the safety of P(NIPAAm‐co‐AAm) to the conceptus. METHODS: From gestation days (GD) 6–16, pregnant CD‐1 mice were dosed via i.p. injection with aqueous solutions containing 500, 750, or 1,000 mg/kg/d P(NIPAAm‐co‐AAm). Dams were sacrificed on GD 17 and their litters were examined for abnormalities. RESULTS: P(NIPAAm‐co‐AAm) caused no statistically significant difference in maternal weight gain or percent resorbed or dead fetuses compared to control values, but fetal weight was significantly decreased in the two highest dosage groups. CONCLUSIONS: At the highest dosages employed, maternal exposure to P(NIPAAm‐co‐AAm) was associated with decreased fetal weight. However, as the estimated human exposure levels for persons using this system would be some 1,500‐fold lower than the lowest dosage administered in this study, the authors feel that this oligomer was not shown to pose a biologically significant risk at relevant human dosages. Birth Defects Res (Part B), 2008. © 2008 Wiley‐Liss, Inc.     

Synthesis and properties of thermo- and pH-sensitive poly(N-isopropylacrylamide)/polyaspartic acid IPN hydrogels

Various interpenetrating polymer network (IPN) hydrogels with sensitivity to temperature and pH were prepared by introducing the pH-sensitive polymer polyaspartic acid (PASP) hydrogel, into the poly(N-isopropylacrylamide) (PNIPAAm) hydrogel system for the purpose of improving its response rate to temperature. The morphologies and thermal behavior of the prepared IPN hydrogels were studied by both scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The IPN hydrogels showed a large and uneven porous network structure, without showing the common PNIPAAm hydrogel structure. The paper moreover studied their swelling properties, such as temperature dependence of equilibrium swelling ratio, shrinking kinetics, re-swelling kinetics and oscillatory swelling behavior in water. The swelling experiment results revealed that IPN hydrogels exhibited much faster shrinking and re-swelling in function of the composition ratio of the two network components. These fast responsive hydrogels foster potential applications in biomedical and biotechnology fields.     

Poly(N,N,N-trimethylammoniumalkyl acrylamide chloride) based hydrogels for serum cholesterol reduction

Hydrogels present an attractive alternative to nanoscale block copolymer aggregates and microscale resin beads as potential asystemic serum cholesterol reduction materials. Not only would the oral delivery of these materials be more pleasant than the sand-like bile salt anion sequestrant beads but also the hydrogel preparation is much simpler than the copolymer aggregate analogues [Cameron, N. S.; Eisenberg, A.; Brown, G. R. Biomacromolecules 2002, 3, 116-123. Cameron, N. S.; Eisenberg, A.; Brown, G. R. Biomacromolecules 2002, 3, 124-132]. Our goal was to explore these materials building on our experience with bulk resins and self-assembled copolymers. In this paper, following a brief introduction to hydrogels and their application to hypercholesterolemia, the synthesis, characterization, and preliminary glycocholate binding properties of poly(N,N,N-trimethylammoniumalkyl acrylamide chloride)gel are presented [Cameron, N. S.; Eisenberg, A.; Brown, G. R. Polym. Preprints 2002, 43, 771-772].     

Preparation and application of poly(vinylamine)/alginate microcapsules to culturing of a mouse erythroleukemia cell line

Poly(vinylamine) was synthesized and used to replace poly-L-lysine in forming microcapsule with alginate. Test results indicated that capsules with good mechanical strength and permeability could be obtained under the controlled treatment conditions of poly(vinylamine) and alginate. Application of the current microcapsular system to cell culture was demonstrated by the usage of erythropoietin- (EPO-) producing IW32 mouse erythroleukemia cells. The encapsulated IW32 cells grew to a density of 8 x 10(7) cells/mL, two times that found in the corresponding poly-L-lysine/alginate capsules. The EPO accumulation inside the microcapsule with the current encapsulation system was also higher. A concentration of 7.3 U/mL was attained as compared to 4.3 U/mL in the poly-L-lysine/alginate microcapsule. (c) 1992 John Wiley & Sons, Inc.     

脂肪酶的固定化新技术

脂肪酶已被广泛应用于有机相催化体系中的水解、酯化和转酯反应,其固定化技术是得以工业化应用的关键因素。简要介绍了最新发展的几种固定化技术即交联酶晶体、硅基质包埋、脂质包被、共价固定、ＣＬＡｓ固定化等方法。     

Helix formation in poly (N epsilon,N epsilon,N epsilon-trimethyl-L-lysine) and poly (L-lysine): dependence on concentration and molecular weight.

Helix formation in (Lys)n.HClO4 and poly(N epsilon,N epsilon,N epsilon-trimethyl-L-lysine).HClO4 +AD(LysMe3)n.HClO4+BD is dependent on peptide concentration and on molecular weight. For (LysMe3)n.HClO4 of degree of polymerization (DP) 2510 the midpoint of the coil-to-helix transition is 2 mM and for DP of 190 it is 5 mM. For (Lys)n.HClO4 the peptide concentration for half-helix is 30-60 times as high, and is only weakly dependent, if at all, on molecular weight. Helix formation is an intermolecular process. The use of methylated (Lys)n as the perchlorate permits study of the intermolecular coil-helix transition at low concentration, instead of the high concentration (ca. 1-2 M) required for (Lys)n.HBr. At constant peptide concentration helix content increases with added NaClO4. The higher the peptide concentration, the less NaClO4 is needed to induce helix.     

Synthesis and gelation of DOPA-modified poly(ethylene glycol) hydrogels

3,4-Dihydroxyphenylalanine (DOPA) residues are known for their ability to impart adhesive and curing properties to mussel adhesive proteins. In this paper, we report the preparation of linear and branched DOPA-modified poly(ethylene glycol)s (PEG-DOPAs) containing one to four DOPA endgroups. Gel permeation chromatography-multiple-angle laser light scattering analysis of methoxy-PEG-DOPA in the presence of oxidizing reagents (sodium periodate, horseradish peroxidase, and mushroom tyrosinase) revealed the formation of oligomers of methoxy-PEG-DOPA, presumably resulting from oxidative polymerization of DOPA endgroups. In the case of PEG-DOPAs containing two or more DOPA endgroups, oxidative polymerization resulted in polymer network formation and rapid gelation. The amount of time required for gelation of aqueous PEG-DOPA solutions was found to be as little as 1 min and was dependent on the polymer architecture as well as the type and concentration of oxidizing reagent used. Analysis of reaction mixtures by UV-vis spectroscopy allowed the identification of reaction intermediates and the elucidation of reaction pathways. On the basis of the observed reaction intermediates, oxidation of the catechol side chain of DOPA resulted in the formation of highly reactive DOPA-quinone, which further reacted to form cross-linked products via one of several pathways, depending on the presence or absence of N-terminal protecting groups on the PEG-DOPA. N-Boc protected PEG-DOPA cross-linked via phenol coupling and quinone methide tanning pathways, whereas PEG-DOPA containing a free amino group cross-linked via a pathway that resembled melanogenesis. Similar differences were observed for the rate of gel formation as well as the molecular weight between cross-links ((-)M(c)), calculated using equilibrium swelling and the Flory-Rehner equation.     

New application of depth filters for the immobilization of Candida antarctica lipase B

Applied Microbiology and Biotechnology - The objective of this study was to use for the first time depth filters, which are usually intended for clarification of cell culture broth, as a direct...     

Zwitterionic poly(carboxybetaine) hydrogels for glucose biosensors in complex media

Zwitterionic hydrogels based on poly(carboxybetaine) methacrylate (polyCBMA) were developed to protect implantable electrochemical glucose biosensors from biofouling in complex media. To enhance the linearity and sensitivity of the sensing profile, both physical and chemical adsorption methods were developed. Results show that glucose sensors coated with polyCBMA hydrogels via the chemical method achieve very high sensitivity and good linearity in response to glucose in PBS, 10%, 50%, and 100% human blood serum. Essentially identical glucose signals were observed even after prolonged exposure to blood samples for over 12 days. The excellent performance of polyCBMA hydrogel coating offers great promise for designing biocompatible implantable glucose biosensors in biological medium.