Microbial Dissimilatory Sulfur Cycle in Acid Mine Water

Ferric, sulfate, and hydrogen ions are produced from pyritic minerals associated with coal as a result of autotrophic bacterial metabolism. Water carrying these ions accumulated behind a porous dam composed of wood dust originating at a log-cutting mill. As water seeped through the porous dam, it was enriched in organic nutrients which then supported growth and metabolism of heterotrophic bacteria in the water downstream from the dam. The heterotrophic microflora within and below the sawdust dam included dissimilatory sulfate-reducing anaerobic bacteria which reduce sulfate to sulfide. The sulfide produced caused the chemical reduction of ferric to ferrous ion, and black FeS precipitate was deposited on the pond bottom. A net increase in the pH of the lower pond water was observed when compared to the upper pond water. Microbial activity in the wood dust was demonstrated, and a sequence of cellulose degradation processes was inferred on the basis of sugar accumulation in mixed cultures in the laboratory, ultimately yielding fermentation products which serve as nutrients for sulfate-reducing bacteria. Some of the microorganisms were isolated and characterized. The biochemical and growth characteristics of pure culture isolates were generally consistent with observed reactions in the acidic environment, with the exception of sulfate-reducing bacteria. Mixed cultures which contained sulfate-reducing bacteria reduced sulfate at pH 3.0 in the laboratory with sawdust as the only nutrient. Pure cultures of sulfate-reducing bacteria isolated from the mixed cultures did not reduce sulfate below pH 5.5.     

Removal of cadmium(II) ion from aqueous system by dry biomass, immobilized live and heat-inactivated Oscillatoria sp. H1 isolated from freshwater (Mogan Lake)

Oscillatoria sp. H1 (Cyanobacteria, microalgae) isolated from Mogan Lake was used for the removal of cadmium ions from aqueous solutions as its dry biomass, alive and heat-inactivated immobilized form on Ca-alginate. Particularly, the effect of physicochemical parameters like pH, initial concentration and contact time were investigated. The sorption of Cd(II) ions on the sorbent used was examined for the cadmium concentrations within the range of 25-250 mg/L. The biosorption of Cd(II) increased as the initial concentration of Cd(II) ions increased in the medium up to 100 mg/L. Maximum biosorption capacities for plain alginate beads, dry biomass, immobilized live Oscillatoria sp. H1 and immobilized heat-inactivated Oscillatoria sp. H1 were 21.2, 30.1, 32.2 and 27.5 mg/g, respectively. Biosorption equilibrium was established in about 1 h for the biosorption processes. The biosorption was well described by Langmuir and Freundlich adsorption isotherms. Maximum adsorption was observed at pH 6.0. The alginate-algae beads could be regenerated using 50 mL of 0.1 mol/L HCl solution with about 85% recovery.     

Spore-forming thermophilic sulfate-reducing bacteria isolated from north sea oil field waters

Thermophilic sulfate-reducing bacteria were isolated from oil field waters from oil production platforms in the Norwegian sector of the North Sea. Spore-forming rods dominated in the enrichments when lactate, propionate, butyrate, or a mixture of aliphatic fatty acids (C(4) through C(6)) was added as a carbon source and electron donor. Representative strains were isolated and characterized. The isolates grew autotrophically on H(2)-CO(2) and heterotrophically on fatty acids such as formate, propionate, butyrate, caproate, valerate, pyruvate, and lactate and on alcohols such as methanol, ethanol, and propanol. Sulfate, sulfite, and thiosulfate but not nitrate could be used as an electron acceptor. The temperature range for growth was 43 to 78 degrees C; the spores were extremely heat resistant and survived 131 degrees C for 20 min. The optimum pH was 7.0. The isolates grew well in salt concentrations ranging from 0 to 800 mmol of NaCl per liter. Sulfite reductase P582 was present, but cytochrome c and desulfoviridin were not found. Electron micrographs revealed a gram-positive cell organization. The isolates were classified as a Desulfotomaculum sp. on the basis of spore formation, general physiological characteristics, and submicroscopic organization. To detect thermophilic spore-forming sulfate-reducing bacteria in oil field water, polyvalent antisera raised against antigens from two isolates were used. These bacteria were shown to be widespread in oil field water from different platforms. The origin of thermophilic sulfate-reducing bacteria in the pore water of oil reservoirs is discussed.     

土生鳞伞对Cd2+的吸附特性

以土生鳞伞（Pholiota terrestris Overh.）子实体为生物吸附剂吸附水溶液中的Cd2+,分析吸附剂用量、初始pH值、初始重金属浓度、反应时间这4个因素对吸附的影响,并采用Langmuir和Freundlich等温吸附模型及准一级、准二级动力学模型拟合土生鳞伞的生物吸附特性.结果表明:水溶液中Cd2+...     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Biosorption of chromium, copper, manganese and zinc by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum

The study describes the sorption of Cr, Cu, Mn and Zn by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum and heavy metals. The concentrations studied were 50, 49, 60 and 70 (mg L(-1)) for Cr, Cu, Mn and Zn, respectively. The solution pH and ionic strength were very important factors in the metal biosorption performance and the biosorption capacity of P. aeruginosa AT18 for Cr3+,Cu2+, Mn2+ and Zn2+. In aqueous solution, the biosorption increased with increasing pH in the range 5.46-7.72. The results obtained in the experimental assays show that P. aeruginosa AT18 has the capacity for biosorption of the metallic ions Cr3+, Cu2+ and Zn2+ in solutions, although its capacity for the sorption of manganese is low (22.39 mg Mn2+/g of biomass) in comparison to the Cr3+, Cu2+ and Zn2+ ions, as shown by the individual analyses. However, 20% of the manganese was removed from an initial concentration of 49.0 mg L(-1), with a Qm value similar to that obtained in solutions containing mixtures of Cr3+, Cu2+, Mn2+and Zn2+. The chromium level sorbed by P. aeruginosa AT18 biomass was higher than that for Cu, Mn and Zn, with 100% removal in the pH range 7.00-7.72 and a Qm of 121.90-200.00 mg of Cr3+/g of biomass. The removal of Cr, Cu and Zn is also a result of precipitation processes.     

An improved method for production of silica from rice hull ash

Biosorption of monovalent ions Na+ and K+, by deactivated protonated yeast (Saccharomyces cerevisiae) at controlled pH, was compared with biosorption of divalent ions Ca2+ and Mg2+ to help to understand the underlying bindingmechanisms. The adsorption for monovalent ions was accompanied by H+ release. Divalent ions were sorbed by proton displacement, and also an additional mode not accompanied by release of H+. The sorption uptake of both monovalent and divalent metal ions increased with pH in the range 3-7 peaking at 6.75. Equilibrium sorption isotherms at pH = 6.75 showed that the totalmaximum biosorptive capacity for metal ions decreased in the following order: Ca > Mg > Na > or = K.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

The effect of sodium salts and pH on hydrogenase activity of the haloalkaliphilic sulfate-reducing bacteria

Hydrogenase is the main catabolic enzyme of hydrogen-utilizing sulfate-reducing bacteria. In haloalkaliphilic sulfate reducers, hydrogenase, particularly if it is periplasmic, functions at high concentrations of Na+ ions and low concentrations of H+ ions. The hydrogenases of the newly isolated sulfate-reducing bacteria Desulfonatronum thiodismutans, D. lacustre, and Desulfonatrovibrio hydrogenovorans exhibit different sensitivity to Na+ ions and remain active at NaCl concentrations between 0 and 4.3 M and NaHCO3 concentrations between 0 and 1.2 M. The hydrogenases of D. lacustre and D. thiodismutans remain active at pH values between 6 and 12. The optimum pH for the hydrogenase of D. thiodismutans is 9.5. The optimum pH for the cytoplasmic and periplasmic hydrogenases of D. lacustre is 10. Thus, the hydrogenases of D. thiodismutans, D. lacustre, and Dv. hydrogenovorans are tolerant to high concentrations of sodium salts and extremely tolerant to high pH values, which makes them unique objects for biochemical studies and biotechnological applications.     

Phylogenetic diversity of aerobic saprotrophic bacteria isolated from the Daqing oil field

A diverse and active microbial community in the stratal waters of the Daqing oil field (China), which is exploited with the use of water-flooding, was found to contain aerobic chemoheterotrophic bacteria (including hydrocarbon-oxidizing ones) and anaerobic fermentative, sulfate-reducing, and methanogenic bacteria. The aerobic bacteria were most abundant in the near-bottom zones of injection wells. Twenty pure cultures of aerobic saprotrophic bacteria were isolated from the stratal waters. Under laboratory conditions, they grew at temperatures, pH, and salinity values typical of the stratal water from which they were isolated. These isolates were found to be able to utilize crude oil and a wide range of hydrocarbons, fatty acids, and alcohols. Phylogenetic analysis carried out with the use of complete 16S rRNA sequences showed that the isolates could be divided into three major groups: gram-positive bacteria with a high and a low G + C content of DNA and gram-negative bacteria of the gamma-subclass of the Proteobacteria. Gram-positive isolates belonged to the genera Bacillus, Brevibacillus, Rhodococcus, Dietzia, Kocuria, Gordonia, Cellulomonas, and Clavibacter. Gram-negative isolates belonged to the genera Pseudomonas and Acinetobacter. In their 16S rRNA sequences, many isolates were similar to the known microbial species and some probably represented new species.     

Biosorption of Cr (VI) from aqueous solution by Rhizopus nigricans

The study was aimed to quantify the Cr sorption ability of powdered biomass of Rhizopus nigricans at the best operating conditions. The influence of solution pH, agitation, Cr (VI) concentration, biomass dosage, contact time, biomass particle size and temperature were studied. The optimum pH for biosorption of Cr (VI) was found to be 2.0. Higher adsorption percentage was noted at lower initial concentrations of Cr ions, while the adsorption capacity of the biomass increased with increasing concentration of ions. Optimum biomass dosage was observed as 0.5% (w/v). More than 75% of the ions were removed within 30 min of contact and maximum removal was obtained after 8 h. Biomass particles of smaller size (90 microm) gave maximum adsorption (99.2%) at 100 mg/l concentration. The adsorption capacity increased with increase in temperature and agitation speed and the optimum were determined as 45 degrees C at 120 rpm. Freundlich and Langmuir isotherms were used to evaluate the data and the regression constants were derived. The adsorption rate constant values (Kad) were calculated for different initial concentration of Cr ions and the sorption was found to be higher at lower concentration (100 mg/l) of metal ion.     

Cadmium removal from simulated wastewater to biomass byproduct of Lentinus edodes

A kind of agricultural waste, the byproduct of brown-rot fungus Lentinus edodes, was used as an efficient biosorbent for the removal of cadmium from water in this paper. The sorption conditions, such as pH, the dose of biomass and the initial concentration of cadmium were examined. Three kinds of adsorption models were applied to simulate the biosorption data. Uptake of cadmium was higher in weak acid condition than in strong acid condition. Nearly no sorption of cadmium occurred when the pH value was lower than 2.5. Biosorption isothermal data could be well simulated by Freundlich model, and then Langmuir and Temkin model. Langmuir simulation of the biosorption showed that the maximum uptake of cadmium was 5.58mmol/g in weak acid condition, which was much higher than many other biosorbents. The exchanged proton was highly related to the uptake of cadmium in weak acid condition. Fourier transform infrared spectrums and energy-dispersive X-ray microanalyzer were used to reveal ion-exchange mechanism between cadmium and the functional groups or participated inorganic metal ions during biosorption.     

Comparison of cadmium biosorption by Gram-positive and Gram-negative bacteria from activated sludge

Summary Gram-positive and Gram-negative bacteria were isolated from activated sludge and used to evaluate differences in cadmium biosorption. Gram-positive bacteria exhibited approximately 20% more cadmium biosorption at 30°C and pH 6.6 than Gram-negatives. Biosorption was largely passive in both cases, although metabolic uptake appeared to occur to a higher extent with Gram-positive bacteria.     

Biosorption of Pb2+ from aqueous solution by waste biomass of aerial roots of Rhizophora mangle (red mangrove)

The processing waste of the aerial roots of Rhizophora mangle was used in both its unmodified or mercaptoacetic acid (MAA) modified form for the sorption of Pb2+ from aqueous solution. The biomass rapidly and strongly sorbed Pb2+ at pH 5.0, which indicated chemisorption. A significant increase in Pb2+ sorption resulted from MAA treatment of the biomass, indicating that sorption occurs through an ion-exchange process. From sorption-capacity experiments, the unmodified and modified materials extracted, at pH 5, 31.3 and 85.5 mg of Pb2+ per gram of biomass, respectively, from aqueous solutions. Our studies may contribute to an innovative method for the economical and ecologically save removal and recovery of heavy-atom metal ions from contaminated waters through biosorption.     

Biosorption of Cd(II) and Pb(II) onto brown seaweed, Lobophora variegata (Lamouroux): kinetic and equilibrium studies

The present work deals with the biosorption performance of raw and chemically modified biomass of the brown seaweed Lobophora variegata for removal of Cd(II) and Pb(II) from aqueous solution. The biosorption capacity was significantly altered by pH of the solution delineating that the higher the pH, the higher the Cd(II) and Pb(II) removal. Kinetic and isotherm experiments were carried out at the optimal pH 5.0. The metal removal rates were conspicuously rapid wherein 90% of the total sorption occurred within 90 min. Biomass treated with CaCl₂ demonstrated the highest potential for the sorption of the metal ions with the maximum uptake capacities i.e. 1.71 and 1.79 mmol g⁻¹ for Cd(II) and Pb(II), respectively. Kinetic data were satisfactorily manifested by a pseudo-second order chemical sorption process. The process mechanism consisting of both surface adsorption and pore diffusion was found to be complex. The sorption data have been analyzed and fitted to sorption isotherm of the Freundlich, Langmuir, and Redlich–Peterson models. The regression coefficient for both Langmuir and Redlich–Peterson isotherms were higher than those secured for Freundlich isotherm implying that the biosorption system is possibly monolayer coverage of the L. variegata surface by the cadmium and lead ions. FT-IR studies revealed that Cd(II) and Pb(II) binding to L. variegata occurred primarily through biomass carboxyl groups accompanied by momentous interactions of the biomass amino and amide groups. In this study, we have observed that L. variegata had maximum biosorption capacity for Cd(II) and Pb(II) reported so far for any marine algae. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation and characterization of chitosan encapsulated Sargassum sp. biosorbent for nickel ions sorption

A new biosorbent - Sargassum sp. encapsulated with epichlorohydrin (ECH) cross-linked chitosan (CS) was investigated for nickel ions removal. The prepared biosorbent with Sargassum sp. to cross-linked chitosan of 3 (weight ratio) had the highest sorption capacity. The biosorption kinetics can be well fitted by the diffusion-controlled model. The organic leaching of CS was 77-88% less than that of algae at different pH. The biosorption capacity of nickel on CS was much higher than that of cross-linked chitosan (CLC) bead and lower than that of raw algae due to encapsulation. In addition, the reusability of CS was further evaluated and confirmed through five adsorption-desorption cycles. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis demonstrated that the nickel ions sequestration mechanism included ion exchange and nickel complexation with the carboxyl, amino, alcoholic and ether groups in CS.     

Studies on Uranium Removal by the Extracellular Polysaccharide of a Pseudomonas aeruginosa Strain

Extracellular polysaccharide (EPS) produced by a Pseudomonas aeruginosa strain BU2 was characterized for its ability to remove uranium from aqueous solution. The EPS was acidic in nature and found as a potent biosorbent for uranium (U), showing pH dependence and fast saturating metal sorption, being maximum (985 mg U g^{? 1} EPS) at pH 5.0. The polymer showed enhanced uranium sorption capacity and affinity with increasing solution pH, suggesting a preferential sorption of monovalent uranyl hydroxide ions over the nonhydroxylated divalent species. Pseudo-first-order and pseudo-second-order kinetic models were applied to the experimental data, assuming that the external mass transfer limitations in the system can be neglected and biosorption is sorption controlled. Equilibrium metal binding showing conformity to the Freundlich model suggested a multilayer sorption involving specific binding sites with affinity distribution. The presence of two types of metal binding sites corresponding to strong and weak binding affinity was interpreted from the Scatchard model equation. Uranium sorption by EPS was unaffected or only slightly affected in the presence of several interfering cations and anions, except iron and thorium. Fourier transform infrared (FTIR) spectroscopy ascertained the strong binding of uranium with the carboxylic groups of uronic acids of bacterial EPS at pH 5.0, whereas at lower pH, amino and hydroxyl groups played a major role in metal binding.     

Nickel(II) biosorption by <Emphasis Type="Italic">Rhodotorula glutinis</Emphasis>

The present study reports the feasibility of using Rhodotorula glutinis biomass as an alternative low-cost biosorbent to remove Ni(II) ions from aqueous solutions. Acetone-pretreated R. glutinis cells showed higher Ni(II) biosorption capacity than untreated cells at pH values ranging from 3 to 7.5, with an optimum pH of 7.5. The effects of other relevant environmental parameters, such as initial Ni(II) concentration, shaking contact time and temperature, on Ni(II) biosorption onto acetone-pretreated R. glutinis were evaluated. Significant enhancement of Ni(II) biosorption capacity was observed by increasing initial metal concentration and temperature. Kinetic studies showed that the kinetic data were best described by a pseudo-second-order kinetic model. Among the two-, three-, and four-parameter isotherm models tested, the Fritz-Schluender model exhibited the best fit to experimental data. Thermodynamic parameters (activation energy, and changes in activation enthalpy, activation entropy, and free energy of activation) revealed that the biosorption of Ni(II) ions onto acetone-pretreated R. glutinis biomass is an endothermic and non-spontaneous process, involving chemical sorption with weak interactions between the biosorbent and Ni(II) ions. The high sorption capacity (44.45 mg g⁻¹ at 25°C, and 63.53 mg g⁻¹ at 70°C) exhibited by acetone-pretreated R. glutinis biomass places this biosorbent among the best adsorbents currently available for removal of Ni(II) ions from aqueous effluents.     

Phylogenetic Diversity of Aerobic Saprotrophic Bacteria Isolated from the Daqing Oil Field

A diverse and active microbial community in the stratal waters of the Daqing oil field (China), which is exploited with the use of water-flooding, was found to contain aerobic chemoheterotrophic bacteria (including hydrocarbon-oxidizing ones) and anaerobic fermentative, sulfate-reducing, and methanogenic bacteria. The aerobic bacteria were most abundant in the near-bottom zones of injection wells. Twenty pure cultures of aerobic saprotrophic bacteria were isolated from the stratal waters. Under laboratory conditions, they grew at temperatures, pH, and salinity values typical of the stratal water from which they were isolated. These isolates were found to be able to utilize crude oil and a wide range of hydrocarbons, fatty acids, and alcohols. Phylogenetic analysis carried out with the use of complete 16S rRNA sequences showed that the isolates could be divided into three major groups: gram-positive bacteria with a high and a low G+C content of DNA and gram-negative bacteria of the -subclass of the Proteobacteria. Gram-positive isolates belonged to the genera Bacillus, Brevibacillus, Rhodococcus, Dietzia, Kocuria, Gordonia, Cellulomonas, and Clavibacter. Gram-negative isolates belonged to the genera Pseudomonas and Acinetobacter. In their 16S rRNA sequences, many isolates were similar to the known microbial species and some probably represented new species.     

Enhancement of Lead(II) Biosorption by Microalgal Biomass Immobilized onto Loofa (Luffa cylindrica) Sponge

A unicellular green microalga, Chlorella sorokiniana, was immobilized on loofa (Luffa cylindrica) sponge and successfully used as a new biosorption system for the removal of lead(II) ions from aqueous solutions. The biosorption of lead(II) ions on both free and immobilized biomass of C. sorokiniana was investigated using aqueous solutions in the concentration range of 10–300 mg/L. The biosorption of lead(II) ions by C. sorokiniana biomass increased as the initial concentration of lead(II) ions increased in the medium. The maximum biosorption capacity for free and immobilized biomass of C. sorokiniana was found to be 108.04 and 123.67 mg lead(II)/g biomass, respectively. The biosorption kinetics were found to be fast, with 96 % of adsorption within the first 5 min and equilibrium reached at 15 min. The adsorption of lead(II) both by free and immobilized C. sorokiniana biomass followed the Langmuir isotherm. The biosorption capacities were detected to be dependent on the pH of the solution; and the maximum adsorption was obtained at a solution pH of about 5. The effect of light metal ions on lead(II) uptake was also studied and it was shown that the presence of light metal ions did not significantly affect lead(II) uptake. The loofa sponge‐immobilized C. sorokiniana biomass could be regenerated using 0.1 M HCl, with up to 99 % recovery. The desorbed biomass was used in five biosorption‐desorption cycles, and no noticeable loss in the biosorption capacity was observed. In addition, fixed bed breakthrough curves for lead(II) removal were presented. These studies demonstrated that loofa sponge‐immobilized biomass of C. sorokiniana could be used as an efficient biosorbent for the treatment of lead(II) containing wastewater.