Biodeterioration of Mayan buildings at uxmal and tulum,Mexico

Uxmal and Tulum are two important Mayan sites in the Yucatan peninsula. The buildings are mainly composed of limestone and grey/black discoloration is seen on exposed walls and copious greenish biofilms on inner walls. The principal microorganisms detected on interior walls at both Uxmal and Tulum were cyanobacteria; heterotrophic bacteria and filamentous fungi were also present. A dark‐pigmented mitosporic fungus and Bacillus cereus, both isolated from Uxmal, were shown to be acidogenic in laboratory cultures. Cyanobacteria belonging to rock‐degrading genera Synechocystis and Gloeocapsa were identified at both sites. Surface analysis previously showed that calcium ions were present in the biofilms on buildings at Uxmal and Tulum, suggesting the deposition of biosolubilized stone. Apart from their potential to degrade the substrate, the coccoid cyanobacteria supply organic nutrients for bacteria and fungi, which can produce organic acids, further increasing stone degradation.     

Genetic Characterization of Epilithic Cyanobacteria and Their Associated Bacteria

Epilithic phototrophic biofilms develop inside Roman Necropolis and Catacombs on rock surfaces exposed to artificial light sources and are composed by a microbial consortium dominated by cyanobacteria. In this work, six non-axenic cultures of Leptolyngbya sp. strains isolated from biofilms from different Roman hypogea and maintained in cultures from 11 to 20 years were analysed along with their associated bacteria isolated in culture. The employment of PCR-fingerprinting techniques, using HIP1 and ERIC derived primers, allowed the clustering in three groups of the six Leptolyngbya strains and the typing of their isolated bacteria. The bacterial fingerprinting patterns were in agreement with the 16S rRNA gene sequencing and showed the presence in Leptolyngbya isolates of Pseudomonas, Stenotrophomonas, Agrobacterium and Bacillus representatives that were detected also in biofilms sampled from catacombs.     

Bacteriophage Φ S1 Infection of Pseudomonas fluorescens Planktonic Cells versus Biofilms

This communication focuses on the efficacy of a specific lytic phage, phage F S1, as a control agent of Pseudomonas fluorescens biofilms. The effect of phage infection temperature and the host growth temperature were evaluated. The results obtained showed that the phage infection process was temperature dependent and that the optimum temperature of infection of planktonic cells and biofilms was 26°C. At this temperature, bacteriophage F S1, at a multiplicity of infection (MOI) of 0.5 infected both planktonic cells and biofilms causing a biomass reduction of about 85% in both cases.     

Characterization of cyanobacteria isolated from biofilms on stone monuments at Santiniketan,India

Cyanobacterial biofilms occurring on the exterior of three stone monuments at Santiniketan, India were analyzed. Species of Scytonema and Tolypothrix were the major components of these biofilms. Identification was obtained by morphometric procedures and 16S rRNA gene sequencing. Biofilms cultured for prolonged periods revealed the presence of several other cyanobacteria belonging to 14 different genera. Cyanobacteria on stone in the tropical environment of India formed a distinct cluster that was quite different from that of cyanobacteria reported for a similar substratum in temperate regions. Absorption spectra of the organisms from Santiniketan showed a high quantity of scytonemin, mycosporine-like amino acids, and carotenoids. All of the organisms survived in a desiccated state and rapidly revived after wetting. The organisms were heterocystous and nitrogenase activity was reactivated within 24?h of wetting by which time heterocysts in their filaments had also appeared.     

Phototrophic Biofilms on Ancient Mayan Buildings in Yucatan, Mexico

Buildings at the important archaeological sites of Uxmal and Kabah, Mexico, are being degraded by microbial biofilms. Phospholipid fatty acid (PLFA) and chlorophyll a analyses indicated that phototrophs were the major epilithic microorganisms and were more prevalent on interior walls than exterior walls. Culture and microscopical techniques showed that Xenococcus formed the major biomass on interior surfaces, but the stone-degrading genera Gloeocapsa and Synechocystis were also present in high numbers. Relatively few filamentous algae and cyanobacteria were detected. The fatty acid analysis also showed that complex biofilms colonize these buildings. Circular depressions observed by scanning electron microscopy (SEM) on stone and stucco surfaces beneath the biofilm corresponded in shape and size to coccoid cyanobacteria. SEM images also demonstrated the presence of calcareous deposits on some coccoid cells in the biofilm. Phototrophic biofilms may contribute to biodegradation by (1) providing nutrients that support growth of acid-producing fungi and bacteria and (2) active “boring” behavior, the solubilized calcium being reprecipitated as calcium carbonate. Received: 15 March 1999 / Accepted: 24 June 1999     

Characterization of planktonic and biofilm cells from two filamentous cyanobacteria using a shotgun proteomic approach

Abstract

Cyanobacteria promote marine biofouling with significant impacts. A qualitative proteomic analysis, by LC-MS/MS, of planktonic and biofilm cells from two cyanobacteria was performed. Biofilms were formed on glass and perspex at two relevant hydrodynamic conditions for marine environments (average shear rates of 4?s^?1 and 40?s^?1). For both strains and surfaces, biofilm development was higher at 4?s^?1. Biofilm development of Nodosilinea sp. LEGE 06145 was substantially higher than Nodosilinea sp. LEGE 06119, but no significant differences were found between surfaces. Overall, 377 and 301 different proteins were identified for Nodosilinea sp. LEGE 06145 and Nodosilinea sp. LEGE 06119. Differences in protein composition were more noticeable in biofilms formed under different hydrodynamic conditions than in those formed on different surfaces. Ribosomal and photosynthetic proteins were identified in most conditions. The characterization performed gives new insights into how shear rate and surface affect the planktonic to biofilm transition, from a structural and proteomics perspective.     

Nutritional quality of biofilms with respect to light regime in Lake Saint-Pierre (Québec, Canada)

1. In situ experiments were conducted using specialised incubation devices to grow biofilms under varying light regimes and grazing intensities (by excluding fish and large‐sized zooplankton, >2 mm) both within and between two sites in Lake Saint‐Pierre. 2. Biofilms growing under greater in situ UVR and light exposures found in the south water mass were characterised by a greater biomass and nutrient content, but their total fatty acid (FA) contents and ratios of elemental nutrients were not significantly different from the north. There was a relatively greater abundance of chlorophytes and cyanobacteria in the south water mass, along with a greater proportion of low nutritional quality saturated fatty acids (SAFA). Conversely, biofilms growing in the north had a greater relative abundance of diatoms, as well as greater eicosapentaneoic acid (20:5ω3) and docosahexaneoic acid (22:6ω3) concentrations (two FAs implicated in the physiological competency of grazers). 3. The prevailing community structures created differences in terms of nutritional status of the biofilms for benthic grazers and their predators at the two sites. The biofilms from the southern site were characterised by greater food quantity at the expense of quality, while biofilms from the northern site contained less food of a better quality. Despite this, the nutritional regime in the south supported a greater productivity at higher trophic levels. The secondary treatments (light and grazing by fish and macro‐invertebrates) had lesser effects on food quality.     

New microscope produced by <Emphasis Type="Italic">Lambda Praha Co.</Emphasis> applicable to field studies of microorganisms

A new microscope produced by the company Lambda Praha, applicable to field studies, was used for the observation of biofilms growing on stones and rocks of the Red Sea beach at Sharm El Sheikh resort in Egypt. The microscope was equipped with a novel LED illumination system, independent of sunlight as the light source, and an attachable mechanical stage making possible a precise and systematic observation of the preparation. Using this device, black biofilms of cyanobacteria and green biofilms of algae were studied; characteristic sheaths protecting the cells against the intense sunlight were found in cyanobacteria belonging to the genus Lyngbya. Trichomes on phylloids consisting of 3 to 4 cells were observed in algae belonging to the genus Padina, whose nuclei were degraded as a result of apoptosis, which is in contrast to the species Padina pavonia containing visible nuclear residues observed on the shore of the Mediterranean Sea near Lastovo island in Croatia in 2007.     

Relationship between color and pigment production in two stone biofilm-forming cyanobacteria (Nostoc sp. PCC 9104 and Nostoc sp. PCC 9025)

Previous studies have provided evidence that color measurements enable on site quantification of superficial biofilms, thereby avoiding the need for sampling. In the present study, the efficiency of color measurements to evaluate to what extent pigment production is affected by environmental parameters such as light intensity, combined nitrogen and nutrient availability, was tested with two cyanobacteria, Nostoc sp. strains PCC 9104 and PCC 9025, which form biofilms on stone. Both strains were acclimated, in aerated batch cultures for 2 weeks, to three different culture media: BG-11, BG-11₀, and BG-11₀/10 at either high or low light intensity. The content of chlorophyll a, carotenoids, and phycocyanins was measured throughout the experiment, together with variations in the color of the cyanobacteria, which were represented in the CIELAB color space. The results confirmed that the CIELAB color parameters are correlated with pigment content in such a way that variations in the latter are reflected as variations in color.     

Spatial Dominance and Inorganic Carbon Assimilation by Conspicuous Autotrophic Biofilms in a Physical and Chemical Gradient of a Cold Sulfurous Spring: The Role of Differential Ecological Strategies

The community composition and ecophysiological features of microbial autotrophic biofilms were studied in Fuente Podrida, a cold sulfur spring located in East Spain. We demonstrated how different ecophysiological strategies, such as resistance and/or utilization of sulfide and oxygen, light adaptation, or resistance to high water flow, allow each of the microorganisms described to efficiently colonize several areas within the environmental gradient. In the zone of the spring constantly influenced by sulfide-rich waters, biofilms were formed by purple bacteria, cyanobacteria, and filamentous colorless sulfur bacteria. Purple bacteria showed higher photosynthetic efficiency per pigment unit than cyanobacteria, although they were dominant only in anoxic areas. Two filamentous cyanobacteria, strain UVFP1 and strain UVFP2, were also abundant in the sulfide-rich area. Whereas the cyanobacterial strain UVFP2 shows a strategy based on the resistance to sulfide of oxygenic photosynthesis, strain UVFP1, additionally, has the capacity for sulfide-driven anoxygenic photosynthesis. Molecular phylogenetic analyses cluster the benthic strain UVFP1 with genus Planktothrix, but with no particular species, whereas UVFP2 does not closely cluster with any known cyanobacterial species. The colorless sulfur bacterium Thiothrix sp. extended throughout the zone in which both sulfide and oxygen were present, exhibiting its capacity for chemolithoautotrophic dark carbon fixation. Downstream from the source, where springwater mixes with well-oxygenated stream water and sulfide disappears, autotrophic biofilms were dominated by diatoms showing higher photosynthetic rates than cyanobacteria and, by a lesser extent, by a sulfide-sensitive cyanobacterium (strain UVFP3) well adapted to low light availability, although in the areas of higher water velocity far from the river shore, the dominance shifted to crust-forming cyanobacteria. Both types of microorganisms were highly sensitive to sulfide impeding them from occupying sulfide-rich areas of the spring. Sulfide, oxygen, light availability, and water velocity appear as the main factors structuring the autotrophic community of Fuente Podrida spring. An erratum to this article is availbale at .     

Larval development and post-settlement metamorphosis of the barnacle Balanus albicostatus Pilsbry and the serpulid polychaete Pomatoleios kraussii Baird: Impact of a commonly used antifouling biocide,Irgarol 1051

Abstract

The impact of a commonly-used antifouling algicide, Irgarol 1051, on the larval development and post-settlement metamorphosis of the barnacle, Balanus albicostatus Pilsbry (Crustacea: Cirripedia), and the larval metamorphosis of a serpulid polycheate, Pomatoleios kraussii Baird, was evaluated. In the case of B. albicostatus, larval mortality increased with an increase in the concentration of Irgarol 1051, and there was a shift in the larval stage targeted from advanced instars to early instars. Nauplii that survived to the cyprid instar stage when reared in the presence of Irgarol 1051 showed prolonged instar and total naupliar duration when compared to the controls. The post-settlement metamorphosis of cyprids significantly varied with Irgarol concentration and also with biofilm age. One and 2-d-old untreated biofilms showed higher metamorphosis when compared to 5-d-old biofilms. However, when the biofilms that promoted cyprid metamorphosis were treated with Irgarol 1051 at low concentrations, metamorphosis rates decreased. Cyprids were prevented from metamorphosing completely by biofilms treated at the highest concentration of Irgarol 1051. Inhibition of metamorphosis was also observed in the case of competent polychaete larvae when exposed to Irgarol 1051 compared to those exposed to metamorphosis inducers such as 3-iso-butyl-1-methylxanthine (IBMX) and natural biofilms. Identification of the pathway(s) that caused the promotory biofilms to become toxic when exposed to Irgarol 1051 is discussed.     

Characteristics and role of the exocellular polysaccharides produced by five cyanobacteria isolated from phototrophic biofilms growing on stone monuments

Three coccoid and two filamentous cyanobacterial strains were isolated from phototrophic biofilms exposed to intense solar radiation on lithic surfaces of the Parasurameswar Temple and Khandagiri caves, located in Orissa State, India. Based on to their morphological features, the three coccoid strains were assigned to the genera Gloeocapsosis and Gloeocapsa, while the two filamentous strains were assigned to the genera Leptolyngbya and Plectonema. Eleven to 12 neutral and acidic sugars were detected in the slime secreted by the five strains. The secretions showed a high affinity for bivalent metal cations, suggesting their ability to actively contribute to weakening the mineral substrata. The secretion of protective pigments in the polysaccharide layers, namely mycosporine amino acid-like substances (MAAs) and scytonemins, under exposure to UV radiation showed how the acclimation response contributes to the persistence of cyanobacteria on exposed lithoid surfaces in tropical areas.     

Microbial Biofilms on the Sandstone Monuments of the Angkor Wat Complex,Cambodia

Discoloring biofilms from Cambodian temples Angkor Wat, Preah Khan, and the Bayon and West Prasat in Angkor Thom contained a microbial community dominated by coccoid cyanobacteria. Molecular analysis identified Chroococcidiopsis as major colonizer, but low similarity values (<95%) suggested a similar genus or species not present in the databases. In only two of the six sites sampled were filamentous cyanobacteria, Microcoleus, Leptolyngbya, and Scytonema, found; the first two detected by sequencing of 16S rRNA gene library clones from samples of a moist green biofilm on internal walls in Preah Khan, where Lyngbya (possibly synonymous with Microcoleus) was seen by direct microscopy as major colonizer. Scytonema was detected also by microscopy on an internal wall in the Bayon. This suggests that filamentous cyanobacteria are more prevalent in internal (high moisture) areas. Heterotrophic bacteria were found in all samples. DNA sequencing of bands from DGGE gels identified Proteobacteria (Stenotrophomonas maltophilia and Methylobacterium radiotolerans) and Firmicutes (Bacillus sp., Bacillus niacini, Bacillus sporothermodurans, Lysinibacillus fusiformis, Paenibacillus sp., Paenibacillus panacisoli, and Paenibacillus zanthoxyli). Some of these bacteria produce organic acids, potentially degrading stone. Actinobacteria, mainly streptomycetes, were present in most samples; algae and fungi were rare. A dark-pigmented filamentous fungus was detected in internal and external Preah Khan samples, while the alga Trentepohlia was found only in samples taken from external, pink-stained stone at Preah Khan. Results show that these microbial biofilms are mature communities whose major constituents are resistant to dehydration and high levels of irradiation and can be involved in deterioration of sandstone. Such analyses are important prerequisites to the application of control strategies.     

Acclimation at high temperatures increases the ability of Raphidiopsis raciborskii (Cyanobacteria) to withstand phosphate deficiency and reveals distinct strain responses

ABSTRACT

Raphidiopsis (Cylindrospermopsis) raciborskii is one of the most studied potentially harmful cyanobacteria. Single environmental factors such as increased temperature or light are reported to be promoters of R. raciborskii growth, but the interaction of two or more promoting factors is less understood. The performance of two strains of R. raciborskii (MVCC19, Uruguayan and LP1, Brazilian) were evaluated under acclimation and temperature shifts (25–32°C) in combination with two transitions from phosphorus (P) sufficiency to limiting growth conditions. When subjected to transition from high P sufficiency to a P-limiting state, strains were able to grow only at the warmer temperature if previously acclimated. The MVCC19 strain showed higher specific growth rates and a shorter growth phase than LP1. Morphological differences were also found: the MVCC19 strain produced shorter filaments, while the LP1 strain increased in length and the number of cells per filament. The results show the positive effect of high temperature on the ability of R. raciborskii to withstand P-limiting conditions, which may confer resilience of populations to periods of severe nutrient limitation in warm lakes. This finding contributes to the understanding of the success of this species in diverse environmental conditions. The effect of temperature on the tolerance of nutrient deficiency and the performance of strains under lake conditions suggests the need for a drastic reduction in nutrient loads to avoid R. raciborskii dominance in warmer lakes.     

Short-term response of monospecific and natural algal biofilms to copper exposure

The effect of copper additions (Cu ranging from 0 to 30?µM) on the photosynthesis of three different microalgal biofilms was studied to identify the factors that cause sensitivity differences between benthic and pelagic algae. The response of biofilms which colonized artificial substrata in the River Meuse was compared with those of two laboratory-grown monospecific biofilms, one consisting of the diatom Synedra ulna, and the other composed of a filament-forming cyanobacterium, Oscillatoria sp. The photosynthetic yield Φ_II (quantum efficiency of photosystem II) was studied with PAM (Pulse Amplitude Modulated) fluorimetry. S. ulna biofilms appeared to be the most sensitive to Cu, followed by the cyanobacteria, while natural biofilms, dominated by supposedly very sensitive diatom species such as Melosira varians and Diatoma vulgare, were the most resistant to Cu. In the highly productive biofilms, pH is suggested to play a role in lowering toxicity by helping the precipitation of cupric ions. Cu accumulation by the biofilms during the exposure period followed a linear relationship with Cu concentration, saturation not being observed; natural biofilms had an accumulation factor of 1–2.5?×?10³ relative to the concentrations in the water, while the diatoms growing unattached to the substratum had a higher concentration factor, up to 4.9?×?10³. It was concluded that the physical structure of the biofilm (package of cells and thickness), and not the species composition, was the main factor regulating the sensitivity of the biofilm to Cu toxicity during short-term exposures.     

Characterization of polymicrobial biofilms obtained from saliva or carious lesions in dentin

Abstract

This study aimed to compare the formation of polymicrobial biofilms using carious dentin or saliva as inoculum for application in in vitro microbiological studies on caries research. For biofilm growth, combined samples of infected dentin or saliva from three donors were used. The biofilms were grown on glass coverslips, under a regimen of intermittent exposure (6?h day^?1) to 1% sucrose for 4?days. Total bacterial loads, as well as specific aciduric bacteria and mutans streptococci loads were quantified and correlated with biofilm acidogenicity and susceptibility to chlorhexidine. The data were evaluated using the Student’s-t, Mann Whitney and Kruskal-Wallis tests. The two biofilms showed similar microbial loads (total bacteria, aciduric bacteria and mutans streptococci) on day 4, and high acidogenicity after 48?h and were susceptible to chlorhexidine at different time intervals. In conclusion, both dentin and saliva can be used as an inoculum in in vitro studies of processes related to biofilm formation.     

Effects of the interactions between glutaraldehyde and the polymeric matrix on the efficacy of the biocide against pseudomonas fluorescens biofilms

Glutaraldehyde (GTA) is a widely used biocide due to its high effectiveness. The experimental work reported here was carried out to assess the effectiveness of GTA in controlling biofilms formed by Pseudomonas fluorescens on stainless steel slides, and to compare efficacy against both planktonic and sessile micro‐rganisms. The tests were performed using two concentrations of GTA (50 and 100mg 1^‐1), biofilms of two ages (7 and 15 d), several pH values (5,7 and 9) and a range of exposure times (from 0 (control) to 1,3,7 and 24 h). The action of GTA on biofilm and planktonic populations was assessed by means of activity tests, zeta potential, and the wet weight of the biofilms. Biofilms were not completely removed after treatment with GTA in any of the conditions studied. The higher GTA concentration was more effective in reducing the bacterial activity of the biofilm. The biocide proved to be more effective for longer exposure times. GTA showed good antimicrobial activity against P. fluorescens in suspension, with higher activity at pH 9. The findings of this study suggest that when GTA is used to control biofilms, it reacts with one of the components of the matrix, the proteins, thereby reducing its antimicrobial action.     

Development of a high throughput and low cost model for the study of semi-dry biofilms

Abstract

The persistence of microorganisms as biofilms on dry surfaces resistant to the usual terminal cleaning methods may pose an additional risk of transmission of infections. In this study, the Centre for Disease Control (CDC) dry biofilm model (DBM) was adapted into a microtiter plate format (Model 1) and replicated to create a novel in vitro model that replicates conditions commonly encountered in the healthcare environment (Model 2). Biofilms of Staphylococcus aureus grown in the two models were comparable to the biofilms of the CDC DBM in terms of recovered log₁₀ CFU well^?1. Assessment of the antimicrobial tolerance of biofilms grown in the two models showed Model 2 a better model for biofilm formation. Confirmation of the biofilms’ phenotype with an extracellular matrix deficient S. aureus suggested stress tolerance through a non-matrix defined mechanism in microorganisms. This study highlights the importance of conditions maintained in bacterial growth as they affect biofilm phenotype and behaviour.     

The development of marine biofilms on two commercial non-biocidal coatings: a comparison between silicone and fluoropolymer technologies

The antimicrobial performance of two fouling-release coating systems, Intersleek 700® (IS700; silicone technology), Intersleek 900® (IS900; fluoropolymer technology) and a tie coat (TC, control surface) was investigated in a short term (10 days) field experiment conducted at a depth of ca 0.5 m in the Marina Bandar Rawdha (Muscat, Oman). Microfouling on coated glass slides was analyzed using epifluorescence microscopy and adenosine-5′-triphosphate (ATP) luminometry. All the coatings developed biofilms composed of heterotrophic bacteria, cyanobacteria, seven species of diatoms (2 species of Navicula, Cylindrotheca sp., Nitzschia sp., Amphora sp., Diploneis sp., and Bacillaria sp.) and algal spores (Ulva sp.). IS900 had significantly thinner biofilms with fewer diatom species, no algal spores and the least number of bacteria in comparison with IS700 and the TC. The ATP readings did not correspond to the numbers of bacteria and diatoms in the biofilms. The density of diatoms was negatively correlated with the density of the bacteria in biofilms on the IS900 coating, and, conversely, diatom density was positively correlated in biofilms on the TC. The higher antifouling efficacy of IS900 over IS700 may lead to lower roughness and thus lower fuel consumption for those vessels that utilise the IS900 fouling-release coating.