Dye adsorption by sewage sludge-based activated carbons in batch and fixed-bed systems

The present research work deals with the production of activated carbons by chemical activation and pyrolysis of sewage sludges. The adsorbent properties of these sewage sludges based activated carbons were studied by liquid-phase adsorption tests. Dyes removal from colored wastewater being a possible application for sludge based adsorbents, methylene blue and saphranine removing from solution was studied. Pure and binary adsorption assays were performed in batch and fixed bed systems. In all cases studied, the adsorbents produced from sewage sludges were able to adsorb both the compounds considered here. Nevertheless, time required for reaching equilibrium, adsorptive capacity and fixed bed characteristic parameters were different for these two compounds. Methylene blue adsorption occurred faster than that of saphranine, and it was preferably adsorbed when treating binary solutions. It could be concluded that the sewage sludge-based activated carbons may be promising for dyes removal from aqueous streams.     

Methylene blue and iodine adsorption onto an activated desert plant

Although frequently less toxic than many colorless effluents, colored effluents are generally considered by the public as an indicator of pollution. The present investigation aimed at identifying the effectiveness of a local desert plant characteristic of Southwest Algeria and known as Salsolavermiculata, which was pyrolyzed and treated chemically with a 50% zinc chloride solution, to remove methylene blue and iodine. The natural plant adsorption capacities were respectively 23mg/g and 272mg/g for methylene blue and iodine. Corresponding results for the pyrolyzed plant uptakes were 53mg/g and 951mg/g, while those for the pyrolyzed plant, chemically treated and activated at 650 degrees C, were 130mg/g and 1178mg/g, respectively. In comparison, the standard Merck activated carbon capacities were 200mg/g for methylene blue and 950mg/g for iodine. Consequently, this low-cost local plant may also prove useful for the removal of large organic molecules as well as potential inorganic contaminants.     

Characterization of mesoporous activated carbons prepared by pyrolysis of sewage sludge with pyrolusite

Activated carbons were prepared from sewage sludge by chemical activation. Pyrolusite was added as a catalyst during activation and carbonization. The influence of the mineral addition on the properties of the activated carbons produced was evaluated. The results show that activated carbons from pyrolusite-supplemented sewage sludge had up to a 75% higher BET surface area and up to a 66% increase in mesoporosity over ordinary sludge-based activated carbons. Batch adsorption experiments applying the prepared adsorbents to synthetic dye wastewater treatment yielded adsorption data well fitted to the Langmuir isotherm. The adsorbents from pyrolusite-supplemented sludges performed better in dye removal than those without mineral addition, with the carbon from pyrolusite-augmented sludge T2 presenting a significant increase in maximum adsorption capacity of 50 mg/g. The properties of the adsorbents were improved during pyrolusite-catalyzed pyrolysis via enhancement of mesopore production, thus the mesopore channels may provide fast mass transfer for large molecules like dyes.     

Activated carbons from waste biomass by sulfuric acid activation and their use on methylene blue adsorption

Preparation of the activated carbons from sunflower oil cake by sulphuric acid activation with different impregnation ratios was carried out. Laboratory prepared activated carbons were used as adsorbents for the removal of methylene blue (MB) from aqueous solutions. Liquid-phase adsorption experiments were conducted and the maximum adsorption capacity of each activated carbon was determined. The effects of various process parameters i.e., temperature, pH, initial methylene blue concentration, contact time on the adsorption capacity of each activated carbon were investigated. The kinetic models for MB adsorption onto the activated carbons were studied. Langmuir isotherm showed better fit than Freundlich isotherm for all activated carbon samples. The rates of adsorption were found to conform to the pseudo-second-order kinetics with good correlation. The separation factor (R(L)) revealed the favorable nature of the isotherm of the MB activated carbon system.     

Chemical activation of hickory and peanut hull hydrochars for removal of lead and methylene blue from aqueous solutions

Hickory and peanut hydrochars were chemically activated with KOH and H₃PO₄ and tested for their ability to remove methylene blue and lead from aqueous solutions. The physicochemical characteristics of the activated hydrochars determined were surface area, pore volume, and elemental composition. Kinetics and isotherm studies were then conducted on methylene blue adsorption. Compared to their nonactivated counterparts, the chemically activated hydrochars had higher surface areas and more functional groups. Activated hydrochars also had greater methylene blue and lead adsorption rates, which can be attributed to the improved physicochemical characteristics. H₃PO₄ activated hydrochars removed more contaminants than the corresponding KOH ones.     

Adsorption of methylene blue from aqueous solution on pyrolyzed petrified sediment

The adsorption kinetics of methylene blue on pyrolyzed petrified sediment (PPS) has been performed using a batch-adsorption technique. The effects of various experimental parameters, such as initial dye concentration, contact time, and temperature were investigated. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data. The best correlation coefficient was obtained using the pseudo first-order kinetic model, which shows that the adsorption of methylene blue followed the pseudo-first-order rate expression and the rate constants were evaluated. The Langmuir and Freundlich adsorption isotherm models were applied to describe the equilibrium isotherms and the isotherm constants were determined. It was found that the data fitted well to Langmuir and Freundlich models. The activation energy of adsorption was also evaluated for the adsorption of methylene blue onto pyrolyzed sediment. It was found about 8.5 kJ mol(-1). Thermodynamics parameters DeltaG(o), DeltaH(o), DeltaS(o) were calculated, indicating that this process can be spontaneous and endothermic. The adsorption enthalpy and entropy were found as 14-18.5 kJ mol(-1) and 52.8-67 J mol(-1) K(-1), respectively. The results obtained from the adsorption process using PPS as adsorbent was subjected to student's t-test.     

Adsorption of heavy metals onto sewage sludge-derived materials

Two materials were produced from sewage sludge by: (1) pyrolysis of dried sewage sludge (PS); (2) chemical activation of dried sewage sludge with ZnCl(2) followed by pyrolysis (AS). The aim was to study the application of these materials for metal purification from water and to determine the efficiency of each material. Although AS displayed higher capacity, both PS and AS were able to adsorb these metals and the preferential order was equal: Hg(II)>Pb(II)>Cu(II)>Cr(III). For each metal-adsorbent pair, metal adsorption was highly pH dependent. In all cases the equilibrium was well described both by the Langmuir and the Freundlich isotherms. At the corresponding optimum pH, AS showed the following adsorption capacities: 175.4, 64.1, 30.7 and 15.4 mg/g of Hg(II), Pb(II), Cu(II) and Cr(III), respectively. These results indicate the potential application of these sewage sludge based adsorbents for the treatment of metal polluted effluents.     

Studies on the survival of enterohemorrhagic and environmental Escherichia coli strains in wastewater and in activated sludges from dairy sewage treatment plants

Survival of Escherichia coli O157:H7 strain isolated from milk in Poland and an environmental E. coli strain in wastewater from Garwolin and ?owicz dairies and in activated sludges from dairy sewage treatment plants as well as in dairy wastewater with activated sludges was examined. Environmental materials were contaminated with about 10(8) of target bacteria/ml of sample. The experiments were performed under temperature conditions typical of autumn-winter (6 degrees) and spring-summer (24 degrees C) seasons. It was found that the non-pathogenic E. coli strain survived longer in all media than the enterohemorrhagic serotype. E. coli O157:H7 bacteria were not detected (in direct plating method) in activated sludges after 21-28 days; in dairy wastewater as well as in wastewater with activated sludges after 21-25 days. These periods for environmental E. coli strain were 35-42 days (activated sludges), 25-28 days (wastewater with activated sludges). At higher temperature environmental E. coli were not detected in wastewater from ?owicz dairy sewage treatment plant after 25 days, but the bacteria were still present in wastewater from Garwolin dairy sewage tratment plant after 34 days. The obtained results show that the lack of environmental E. coli bacteria (as a indicator bacteria of fecal contamination) in dairy wastewater and in dairy wastewater with activated sludges could indicate the absence of pathogenic E. coli bacteria. Prolonged existence of the enterohemorrhagic serotype in activated sludges shows the need to treat activated sludges prior to the utilization of these materials as fertilizer.     

Quinone profiling of bacterial communities in natural and synthetic sewage activated sludge for enhanced phosphate removal

Respiratory quinones were used as biomarkers to study bacterial community structures in activated sludge reactors used for enhanced biological phosphate removal (EBPR). We compared the quinone profiles of EBPR sludges and standard sludges, of natural sewage and synthetic sewage, and of plant scale and laboratory scale systems. Ubiquinone (Q) and menaquinone (MK) components were detected in all sludges tested at molar MK/Q ratios of 0.455 to 0.981. The differences in MK/Q ratios were much larger when we compared different wastewater sludges (i.e., raw sewage and synthetic sewage) than when we compared sludges from the EBPR and standard processes or plant scale and laboratory scale systems. In all sludges tested a Q with eight isoprene units (Q-8) was the most abundant quinone. In the MK fraction, either tetrahydrogenated MK-8 or MK-7 was the predominant type, and there was also a significant proportion of MK-6 to MK-8 in most cases. A numerical cluster analysis of the profiles showed that the sludges tested fell into two major clusters; one included all raw sewage sludges, and the other consisted of all synthetic sewage sludges, independent of the operational mode and scale of the reactors and the phosphate accumulation. These data suggested that Q-8-containing species belonging to the class Proteobacteria (i.e., species belonging to the beta subclass) were the major constituents of the bacterial populations in the EBPR sludge, as well as in standard activated sludge. Members of the class Actinobacteria (gram-positive bacteria with high DNA G+C contents) were the second most abundant group in both types of sludge. The bacterial community structures in activated sludge processes may be affected more by the nature of the influent wastewater than by the introduction of an anaerobic stage into the process or by the scale of the reactors.     

Adsorption of Phenolic Compounds and Methylene Blue onto Activated Carbon Prepared from Date Fruit Pits

Activated carbon has been prepared from date fruit pits. The carbon, prepared at different burn‐off rates, showed a high uptake of methylene blue. At 92 % burn‐off (weight loss percent of the carbonized pits upon activation), methylene blue uptake was 590 mg/g. With this high capacity, the carbon was then used to study the adsorption of phenol, 2‐nitrophenol, 2,4‐dinitrophenol, and 2,4,6‐trinitrophenol. The prepared activated carbon showed an adsorption capacity better than that of many activated carbons in current use. The experimental adsorption data for the single components were regressed using both Langmuir and Freundlich isotherm models and the fit was generally satisfactory. The experimental adsorption data of the binary system phenol‐2‐nitrophenol were compared with the predicted results using two predictive models: the generalized Langmuir and the IAS models. The data were better represented by the IAS theory than the generalized Langmuir model even though the fit of the experimental data was not adequate.     

Anionic surfactants in treated sewage and sludges: risk assessment to aquatic and terrestrial environments

Compared to low concentrations of anionic surfactants (AS) in activated sludge process effluents (ASP) (<0.2 mg/L), upflow anaerobic sludge blanket-polishing pond (UASB-PP) effluents were found to contain very high concentrations of AS (>3.5 mg/L). AS (or linear alkylbenzen sulfonate, LAS) removals >99% have been found for ASP while in case of UASB-PP it was found to be < or = 30%. AS concentrations averaged 7347 and 1452 mg/kg dry wt. in wet UASB and dried sludges, respectively. Treated sewage from UASB based sewage treatment plants (STPs) when discharged to aquatic ecosystems are likely to generate substantial risk. Post-treatment using 1-1.6d detention, anaerobic, non-algal polishing ponds was found ineffective. Need of utilizing an aerobic method of post-treatment of UASB effluent in place of an anaerobic one has been emphasized. Natural drying of UASB sludges on sludge drying beds (SDBs) under aerobic conditions results in reduction of adsorbed AS by around 80%. Application of UASB sludges on SDBs was found simple, economical and effective. While disposal of treated UASB effluent may cause risk to aquatic ecosystems, use of dried UASB sludges is not likely to cause risk to terrestrial ecosystems.     

Microwave assisted thermal treatment of defective coffee beans press cake for the production of adsorbents

Defective coffee press cake, a residue from coffee oil biodiesel production, was evaluated as an adsorbent for removal of basic dyes (methylene blue – MB) from aqueous solutions. The adsorbent was prepared by microwave treatment, providing a significant reduction in processing time coupled to an increase in adsorption capacity in comparison to conventional carbonization in a muffle furnace. Batch adsorption tests were performed at 25 °C and the effects of particle size, contact time, adsorbent dosage and initial solution pH were investigated. Adsorption kinetics was better described by a second-order model. The experimental adsorption equilibrium data were fitted to Langmuir, Freundlich and Tempkin adsorption models, with Langmuir providing the best fit. The results presented in this study show that microwave activation presents great potential as an alternative method in the production of adsorbents.     

Low temperature conversion of rice husks, eucalyptus sawdust and peach stones for the production of carbon-like adsorbent

In this study, the feasibility of preparing effective adsorbents from unmitigated agroforestry wastes was investigated. Three different kinds of carbon-like materials were produced by low temperature pyrolysis (LTC, <500 degrees C) of the raw materials rice husks, eucalyptus sawdust and peach stones. The carbon-like materials were characterized by instrumental methods (SEM,X-RDS,BET,MAS-RMN,FTIR), physico-chemical adsorption (iodine-, methylene blue- and phenazone-number; acetic acid adsorption isotherm; textile dyes- and carbohydrate adsorption), and heat value determination. The produced materials, which showed appreciable adsorption capacity, can be considered as precursors for the production of active coal or even be used directly as well.     

Adsorption of chromium from aqueous solution by activated alumina and activated charcoal

Cr(VI) is considered to be potentially carcinogenic to humans. Removal of Cr(VI) ions from aqueous solution under different conditions was investigated using activated alumina (AA) and activated charcoal (AC) as adsorbents. Batch mode experiments were conducted to study the effects of adsorbent dose, contact time, pH, temperature and initial concentration of Cr(VI). Results showed that the adsorption of Cr(VI) depended significantly on pH and temperature. Equilibrium studies showed that Cr(VI) had a high affinity for AA at pH 4 and AC at pH 2. For AA, maximum adsorption was found at 25 degrees C, indicating exothermic adsorption, while for AC, maximum adsorption was at 40 degrees C. Freundlich and Langmuir adsorption isotherms were also applied and they showed good fits to the experimental data. The results suggest that both AA and AC could be used as effective adsorbents for the removal of Cr(VI) ions.     

Enumeration of pathogenic bacteria from sewage sludge in Kuwait

Domestic sewage in Kuwait is mainly treated by an activated sludge process. Sewage sludges at different treatment stages and the digested sludge were studied for their content of pathogenic bacteria. Two Gram-positive cocci and eight Gram-negative bacilli were isolated and enumerated in the sewage sludges and in raw sewage. During March, Aeromonas hydrophila was the dominant bacterium isolated. Serratia liquefaciens in raw sewage and sludge-2, and Salmonella species in digested sludge were dominant during April. Enterobacter aerogenes was dominant in sewage samples in May. Various types of bacteria isolated were tested for their sensitivity to a wide range of antibiotics.     

Interactions and Survival of Enteric Viruses in Soil Materials

There were marked differences in the abilities of eight different soil materials to remove and retain viruses from settled sewage, but for each soil material the behavior of two different viruses, poliovirus type 1 and reovirus type 3, was often similar. Virus adsorption to soil materials was rapid, the majority occurring within 15 min. Clayey materials efficiently adsorbed both viruses from wastewater over a range of pH and total dissolved solids levels. Sands and organic soil materials were comparatively poor adsorbents, but in some cases their ability to adsorb viruses increased at low pH and with the addition of total dissolved solids or divalent cations. Viruses in suspensions of soil material in settled sewage survived for considerable time periods, despite microbial activity. In some cases virus survival was prolonged in suspensions of soil materials compared to soil-free controls. Although sandy and organic soil materials were poor virus adsorbents when suspended in wastewater, they gave ≥95% virus removal from intermittently applied wastewater as unsaturated, 10-cm-deep columns. However, considerable quantities of the retained viruses were washed from the columns by simulated rainfall. Under the same conditions, clayey soil material removed ≥99.9995% of the viruses from applied wastewater, and none were washed from the columns by simulated rainfall.     

Chemical Disinfection of Holding-Tank Sewage

A number of chemical disinfectants were evaluated for their bactericidal and virucidal effectiveness in holding-tank sewage. It was found that the disinfection efficiencies of formaldehyde, benzalkonium chloride, cetylpyridinium chloride, and methylene blue were markedly improved if the pH of the sewage was raised from 8.0 to 10.5. When formaldehyde, benzalkonium chloride, and methylene blue were tested with either 2-week holding times with no sewage additions or 10-day holding times with daily sewage additions, disinfection effectiveness was maintained as long as the sewage pH was kept at 10.5 and the disinfectant concentration was kept at 100 mg/liter or more. Calcium hypochlorite, zinc sulfate, and phenol were found to be relatively ineffective disinfectants for holding-tank sewage.     

Interactions and survival of enteric viruses in soil materials

There were marked differences in the abilities of eight different soil materials to remove and retain viruses from settled sewage, but for each soil material the behavior of two different viruses, poliovirus type 1 and reovirus type 3, was often similar. Virus adsorption to soil materials was rapid, the majority occurring within 15 min. Clayey materials efficiently adsorbed both viruses from wastewater over a range of pH and total dissolved solids levels. Sands and organic soil materials were comparatively poor adsorbents, but in some cases their ability to adsorb viruses increased at low pH and with the addition of total dissolved solids or divalent cations. Viruses in suspensions of soil material in settled sewage survived for considerable time periods, despite microbial activity. In some cases virus survival was prolonged in suspensions of soil materials compared to soil-free controls. Although sandy and organic soil materials were poor virus adsorbents when suspended in wastewater, they gave >/=95% virus removal from intermittently applied wastewater as unsaturated, 10-cm-deep columns. However, considerable quantities of the retained viruses were washed from the columns by simulated rainfall. Under the same conditions, clayey soil material removed >/=99.9995% of the viruses from applied wastewater, and none were washed from the columns by simulated rainfall.     

东方栓孔菌菌丝体生物吸附剂对染料的脱色作用及其吸附机制研究

利用东方栓孔菌Trametes orientalis菌丝体制得的生物吸附剂,对刚果红、结晶紫、铬天青、亚甲基蓝和中性红5种染料进行了脱色试验,对脱色效果较好的染料进行了影响因子优化,并通过红外光谱分析、化学修饰等方法研究其吸附作用的机制。结果显示：东方栓孔菌菌丝体生物吸附剂对结晶紫有相对较好的脱色效果;在优化的影响因子中,0%–3.0%（m/v）浓度范围内,盐度对染料脱色有促进作用;表面活性剂促使脱色率增加,吐温60浓度为1.5%（v/v）时脱色率可达83.84%;温度为43℃、初始pH为3.0、振荡培养10d后吸附率最高达91.54%。红外光谱分析及化学修饰结果表明菌丝体对染料的吸附作用主要是由它们之间的静电作用力所致。