Conformational Dynamics of Thermus aquaticus DNA Polymerase I during Catalysis

Despite the fact that DNA polymerases have been investigated for many years and are commonly used as tools in a number of molecular biology assays, many details of the kinetic mechanism they use to catalyze DNA synthesis remain unclear. Structural and kinetic studies have characterized a rapid, pre-catalytic open-to-close conformational change of the Finger domain during nucleotide binding for many DNA polymerases including Thermus aquaticus DNA polymerase I (Taq Pol), a thermostable enzyme commonly used for DNA amplification in PCR. However, little has been performed to characterize the motions of other structural domains of Taq Pol or any other DNA polymerase during catalysis. Here, we used stopped-flow Förster resonance energy transfer to investigate the conformational dynamics of all five structural domains of the full-length Taq Pol relative to the DNA substrate during nucleotide binding and incorporation. Our study provides evidence for a rapid conformational change step induced by dNTP binding and a subsequent global conformational transition involving all domains of Taq Pol during catalysis. Additionally, our study shows that the rate of the global transition was greatly increased with the truncated form of Taq Pol lacking the N-terminal domain. Finally, we utilized a mutant of Taq Pol containing a de novo disulfide bond to demonstrate that limiting protein conformational flexibility greatly reduced the polymerization activity of Taq Pol.     

Human DNA polymerase η is pre-aligned for dNTP binding and catalysis

Pre-steady-state kinetic studies on Y-family DNA polymerase η (Polη) have suggested that the polymerase undergoes a rate-limiting conformational change step before the phosphoryl transfer of the incoming nucleotide to the primer terminus. However, the nature of this rate-limiting conformational change step has been unclear, due in part to the lack of structural information on the Polη binary complex. We present here for the first time a crystal structure of human Polη (hPolη) in binary complex with its DNA substrate. We show that the hPolη domains move only slightly on dNTP binding and that the polymerase by and large is pre-aligned for dNTP binding and catalysis. We also show that there is no major reorientation of the DNA from a nonproductive to a productive configuration and that the active site is devoid of metals in the absence of dNTP. Together, these observations lead us to suggest that the rate-limiting conformational change step in the Polη replication cycle likely corresponds to a rate-limiting entry of catalytic metals in the active site.     

Solution structure of a viral DNA repair polymerase.

DNA polymerase X (Pol X) from the African swine fever virus (ASFV) specifically binds intermediates in the single-nucleotide base-excision repair process, an activity indicative of repair function. In addition, Pol X catalyzes DNA polymerization with low nucleotide-insertion fidelity. The structural mechanisms by which DNA polymerases confer high or low fidelity in DNA polymerization remain to be elucidated. The three-dimensional structure of Pol X has been determined. Unlike other DNA polymerases, Pol X is formed from only a palm and a C-terminal subdomain. Pol X has a novel palm subdomain fold, containing a positively charged helix at the DNA binding surface. Purine deoxynucleoside triphosphate (dNTP) substrates bind between the palm and C-terminal subdomain, at a dNTP-binding helix, and induce a unique conformation in Pol X. The purine dNTP-bound conformation and high binding affinity for dGTP-Mg(2+) of Pol X may contribute to its low fidelity.     

Use of viscogens, dNTPalphaS, and rhodium(III) as probes in stopped-flow experiments to obtain new evidence for the mechanism of catalysis by DNA polymerase beta

The kinetic mechanism and the structural bases of the fidelity of DNA polymerases are still highly controversial. Here we report the use of three probes in the stopped-flow studies of Pol beta to obtain new, direct evidence for our previous interpretations: (a) Increasing the viscosity of the reaction buffer by sucrose or glycerol is expected to slow down the conformational change differentially, and it was shown to slow down the first (fast) fluorescence transition selectively. (b) Use of dNTPalphaS in place of dNTP is expected to slow down the chemical step preferentially, and it was shown to slow down the second (slow) fluorescence transition selectively. (c) The substitution-inert Rh(III)dNTP was used to show for the first time that the slow fluorescence change occurs after mixing of Pol beta.DNA.Rh(III)dNTP with Mg(II). These results, along with crystal structures, suggest that the subdomain-closing conformational change occurs before binding of the catalytic Mg(II) while the rate-limiting step occurs after binding of the catalytic Mg(II). These results provide new evidence to the mechanism we suggested previously, but do not support the results of three recent papers of computational studies. The results were further supported by a "sequential mixing" stopped-flow experiment that used no analogues, and thus ruled out the possibility that the discrepancy between experimental and computational results is due to the use of analogues. The methodologies can be used to examine other DNA polymerases to answer whether the properties of Pol beta are exceptional or general.     

Structural insight into the substrate specificity of DNA Polymerase mu

DNA polymerase mu (Pol mu) is a family X enzyme with unique substrate specificity that contributes to its specialized role in nonhomologous DNA end joining (NHEJ). To investigate Pol mu's unusual substrate specificity, we describe the 2.4 A crystal structure of the polymerase domain of murine Pol mu bound to gapped DNA with a correct dNTP at the active site. This structure reveals substrate interactions with side chains in Pol mu that differ from other family X members. For example, a single amino acid substitution, H329A, has little effect on template-dependent synthesis by Pol mu from a paired primer terminus, but it reduces both template-independent and template-dependent synthesis during NHEJ of intermediates whose 3' ends lack complementary template strand nucleotides. These results provide insight into the substrate specificity and differing functions of four closely related mammalian family X DNA polymerases.     

DNA polymerase beta: pre-steady-state kinetic analyses of dATP alpha S stereoselectivity and alteration of the stereoselectivity by various metal ions and by site-directed mutagenesis

The first pre-steady-state kinetic analysis of the stereoselectivity of a DNA polymerase, Pol beta from rat brain, toward Rp and Sp isomers of dATPalphaS, and alteration of the stereoselectivity by various metal ions and by site-directed mutagenesis are reported. Diastereomers of dATPalphaS were synthesized by enzymatic methods to >98% purity. The rate of polymerization (k(pol)) and the apparent dissociation constant (K(d,app)) were measured with dATP, Rp-dATPalphaS, and Sp-dATPalphaS in the presence of Mg(2+), Mn(2+), or Cd(2+). The results indicate that wild type (WT) polymerase (Pol) beta can incorporate both Sp- and Rp-dATPalphaS in the presence of Mg(2+), but Sp is the preferred isomer. The stereoselectivity, defined as (k(pol)/K(d))(Sp)/(k(pol)/K(d))(Rp) (abbreviated Sp/Rp ratio), is 57.5 in the presence of Mg(2+). When Mg(2+) was substituted with Mn(2+) and Cd(2+), the Sp/Rp ratio decreased to 7.6 and 21, respectively. These results are discussed in relation to the crystal structures of various Pol beta complexes, as well as previous steady-state kinetic studies of other DNA polymerases. In addition, the D276R mutant was designed to introduce a potential extra hydrogen bonding interaction between the arginine side chain and the pro-Sp oxygen of the alpha-phosphate of dNTP. The kinetic data of the D276R mutant showed a pronounced relaxation of stereoselectivity of dATPalphaS (Sp/Rp ratio = 1.5, 3.7, and 1.5 for Mg(2+), Mn(2+), and Cd(2+), respectively). Furthermore, the D276R mutant showed a 5-fold enhanced reactivity toward Rp-dATPalphaS relative to WT Pol beta, suggesting that this mutant Pol beta can be used to incorporate Rp-dNTPalphaS into DNA oligomers.     

A unified kinetic mechanism applicable to multiple DNA polymerases

After extensive studies spanning over half a century, there is little consensus on the kinetic mechanism of DNA polymerases. Using stopped-flow fluorescence assays for mammalian DNA polymerase beta (Pol beta), we have previously identified a fast fluorescence transition corresponding to conformational closing, and a slow fluorescence transition matching the rate of single-nucleotide incorporation. Here, by varying pH and buffer viscosity, we have decoupled the rate of single-nucleotide incorporation from the rate of the slow fluorescence transition, thus confirming our previous hypothesis that this transition represents a conformational event after chemistry, likely subdomain reopening. Analysis of an R258A mutant indicates that rotation of the Arg258 side chain is not rate-limiting in the overall kinetic pathway of Pol beta, yet is kinetically significant in subdomain reopening. We have extended our kinetic analyses to a high-fidelity polymerase, Klenow fragment (KF), and a low-fidelity polymerase, African swine fever virus DNA polymerase X (Pol X), and showed that they follow the same kinetic mechanism as Pol beta, while differing in relative rates of single-nucleotide incorporation and the putative conformational reopening. Our data suggest that the kinetic mechanism of Pol beta is not an exception among polymerases, and furthermore, its delineated kinetic mechanism lends itself as a platform for comparison of the kinetic properties of different DNA polymerases and their mutants.     

The structural basis of the kinetic mechanism of a gap-filling X-family DNA polymerase that binds Mg(2+)-dNTP before binding to DNA

DNA with single-nucleotide (1-nt) gaps can arise during various DNA processing events. These lesions are repaired by X-family DNA polymerases (PolXs) with high gap-filling activity. Some PolXs can bind productively to dNTPs in the absence of DNA and fill these 1-nt gaps. Although PolXs have a crucial role in efficient gap filling, currently, little is known of the kinetic and structural details of their productive dNTP binding. Here, we show that Thermus thermophilus HB8 PolX (ttPolX) had strong binding affinity for Mg(2+)-dNTPs in the absence of DNA and that it follows a Theorell-Chance (hit-and-run) mechanism with nucleotide binding first. Comparison of the intermediate crystal structures of ttPolX in a binary complex with dGTP and in a ternary complex with 1-nt gapped DNA and Mg(2+)-ddGTP revealed that the conformation of the incoming nucleotide depended on whether or not DNA was present. Furthermore, the Lys263 residue located between two guanosine conformations was essential to the strong binding affinity of the enzyme. The ability to bind to either syn-dNTP or anti-dNTP and the involvement of a Theorell-Chance mechanism are key aspects of the strong nucleotide-binding and efficient gap-filling activities of ttPolX.     

Comparative kinetics of nucleotide analog incorporation by vent DNA polymerase

Comparative kinetic and structural analyses of a variety of polymerases have revealed both common and divergent elements of nucleotide discrimination. Although the parameters for dNTP incorporation by the hyperthermophilic archaeal Family B Vent DNA polymerase are similar to those previously derived for Family A and B DNA polymerases, parameters for analog incorporation reveal alternative strategies for discrimination by this enzyme. Discrimination against ribonucleotides was characterized by a decrease in the affinity of NTP binding and a lower rate of phosphoryl transfer, whereas discrimination against ddNTPs was almost exclusively due to a slower rate of phosphodiester bond formation. Unlike Family A DNA polymerases, incorporation of 9-[(2-hydroxyethoxy)methyl]X triphosphates (where X is adenine, cytosine, guanine, or thymine; acyNTPs) by Vent DNA polymerase was enhanced over ddNTPs via a 50-fold increase in phosphoryl transfer rate. Furthermore, a mutant with increased propensity for nucleotide analog incorporation (Vent(A488L) DNA polymerase) had unaltered dNTP incorporation while displaying enhanced nucleotide analog binding affinity and rates of phosphoryl transfer. Based on kinetic data and available structural information from other DNA polymerases, we propose active site models for dNTP, ddNTP, and acyNTP selection by hyperthermophilic archaeal DNA polymerases to rationalize structural and functional differences between polymerases.     

Accuracy, lesion bypass, strand displacement and translocation by DNA polymerases

The structures of DNA polymerases from different families show common features and significant differences that shed light on the ability of these enzymes to accurately copy DNA and translocate. The structure of a B family DNA polymerase from phage RB69 exhibits an active-site closing conformational change in the fingers domain upon forming a ternary complex with primer template in deoxynucleoside triphosphate. The rotation of the fingers domain alpha-helices by 60 degrees upon dNTP binding is analogous to the changes seen in other families of polymerases. When the 3' terminus is bound to the editing 3' exonuclease active site, the orientation of the DNA helix axis changes by 40 degrees and the thumb domain re-orients with the DNA. Structures of substrate and product complexes of T7 RNA polymerase, a structural homologue of T7 DNA polymerase, show that family polymerases use the rotation conformational change of the fingers domain to translocate down the DNA. The fingers opening rotation that results in translocation is powered by the release of the product pyrophosphate and also enables the Pol I family polymerases to function as a helicase in displacing the downstream non-template strand from the template strand.     

An incoming nucleotide imposes an anti to syn conformational change on the templating purine in the human DNA polymerase-iota active site

Substrate-induced conformational change of the protein is the linchpin of enzymatic reactions. Replicative DNA polymerases, for example, convert from an open to a closed conformation in response to dNTP binding. Human DNA polymerase-iota (hPoliota), a member of the Y family of DNA polymerases, differs strikingly from other polymerases in its much higher proficiency and fidelity for nucleotide incorporation opposite template purines than opposite template pyrimidines. We present here a crystallographic analysis of hPoliota binary complexes, which together with the ternary complexes show that, contrary to replicative DNA polymerases, the DNA, and not the polymerase, undergoes the primary substrate-induced conformational change. The incoming dNTP "pushes" templates A and G from the anti to the syn conformation dictated by a rigid hPoliota active site. Together, the structures posit a mechanism for template selection wherein dNTP binding induces a conformational switch in template purines for productive Hoogsteen base pairing.     

The frameshift infidelity of human DNA polymerase lambda. Implications for function

DNA polymerase lambda (Pol lambda) is a member of the Pol X family having properties in common with several other mammalian DNA polymerases. To obtain clues to possible functions in vivo, we have determined the fidelity of DNA synthesis by human Pol lambda. The results indicate that the average single-base deletion error rate of Pol lambda is higher than those of other mammalian polymerases. In fact, unlike other DNA polymerases, Pol lambda generates single-base deletions at average rates that substantially exceed base substitution rates. Moreover, the sequence specificity for single-base deletions made by Pol lambda is different from that of other DNA polymerases and reveals that Pol lambda readily uses template-primers with limited base pair homology at the primer terminus. This ability, together with an ability to fill short gaps in DNA at low dNTP concentrations, is consistent with a role for mammalian Pol lambda in non-homologous end-joining. This may include non-homologous end-joining of strand breaks resulting from DNA damage, because Pol lambda has intrinsic 5',2'-deoxyribose-5-phosphate lyase activity.     

Use of damaged DNA and dNTP substrates by the error-prone DNA polymerase X from African swine fever virus

The structural specificity that translesion DNA polymerases often show for a particular class of lesions suggests that the predominant criterion of selection during their evolution has been the capacity for lesion tolerance and that the error-proneness they display when copying undamaged templates may simply be a byproduct of this adaptation. Regardless of selection criteria/evolutionary history, at present both of these properties coexist in these enzymes, and both properties confer a fitness advantage. The repair polymerase, Pol X, encoded by the African swine fever virus (ASFV) is one of the most error-prone polymerases known, leading us to previously hypothesize that it may work in tandem with the exceptionally error-tolerant ASFV DNA ligase to effect viral mutagenesis. Here, for the first time, we test whether the error-proneness of Pol X is coupled with a capacity for lesion tolerance by examining its ability to utilize the types of damaged DNA and dNTP substrates that are expected to be relevant to ASFV. We (i) test Pol X's ability to both incorporate opposite to and extend from ubiquitous oxidative purine (7,8-dihydro-8-oxoguanine), oxidative pyrimidine (5,6-dihydroxy-5,6-dihydrothymine), and noncoding (AP site) lesions, in addition to 5,6-dihydrothymine, (ii) determine the catalytic efficiency and dNTP specificity of Pol X when catalyzing incorporation opposite to, and when extending from, 7,8-dihydro-8-oxoguanine in a template/primer context, and (iii) quantitate Pol X-catalyzed incorporation of the damaged nucleotide 8-oxo-dGTP opposite to undamaged templates in the context of both template/primer and a single-nucleotide gap. Our findings are discussed in light of ASFV biology and the mutagenic DNA repair hypothesis described above.     

Insight into the catalytic mechanism of DNA polymerase beta: structures of intermediate complexes

The catalytic reaction mediated by DNA polymerases is known to require two Mg(II) ions, one associated with dNTP binding and the other involved in metal ion catalysis of the chemical step. Here we report a functional intermediate structure of a DNA polymerase with only one metal ion bound, the DNA polymerase beta-DNA template-primer-chromium(III).2'-deoxythymidine 5'-beta,gamma-methylenetriphosphate [Cr(III).dTMPPCP] complex, at 2.6 A resolution. The complex is distinct from the structures of other polymerase-DNA-ddNTP complexes in that the 3'-terminus of the primer has a free hydroxyl group. Hence, this structure represents a fully functional intermediate state. Support for this contention is provided by the observation of turnover in biochemical assays of crystallized protein as well as from the determination that soaking Pol beta crystals with Mn(II) ions leads to formation of the product complex, Pol beta-DNA-Cr(III).PCP, whose structure is also reported. An important feature of both structures is that the fingers subdomain is closed, similar to structures of other ternary complexes in which both metal ion sites are occupied. These results suggest that closing of the fingers subdomain is induced specifically by binding of the metal-dNTP complex prior to binding of the catalytic Mg(2+) ion. This has led us to reevaluate our previous evidence regarding the existence of a rate-limiting conformational change in Pol beta's reaction pathway. The results of stopped-flow studies suggest that there is no detectable rate-limiting conformational change step.     

Solution structure of a viral DNA polymerase X and evidence for a mutagenic function.

The African swine fever virus DNA polymerase X (ASFV Pol X or Pol X), the smallest known nucleotide polymerase, has recently been reported to be an extremely low fidelity polymerase that may be involved in strategic mutagenesis of the viral genome. Here we report the solution structure of Pol X. The structure, unique within the realm of nucleotide polymerases, consists of only palm and fingers subdomains. Despite the absence of a thumb subdomain, which is important for DNA binding in other polymerases, we show that Pol X binds DNA with very high affinity. Further structural analyses suggest a novel mode of DNA binding that may contribute to low fidelity synthesis. We also demonstrate that the ASFV DNA ligase is a low fidelity ligase capable of sealing a nick that contains a G-G mismatch. This supports the hypothesis of a virus-encoded, mutagenic base excision repair pathway consisting of a tandem Pol X/ligase mutator.     

Kinetic mechanism of active site assembly and chemical catalysis of DNA polymerase β

It has been inferred from structural and computational studies that the mechanism of DNA polymerases involves subtle but important discrete steps that occur between binding and recognition of the correct dNTP and chemical catalysis. These steps potentially include local conformational changes involving active site residues, reorganization of Mg(2+)-coordinating ligands, and proton transfer. Here we address this broad issue by conducting extensive transient state kinetic analyses of DNA polymerase β (Pol β). We also performed kinetic simulations to evaluate alternative kinetic models. These studies provide some support for two-step subdomain closing and define constraints under which a kinetically significant prechemistry step can occur. To experimentally identify additional microscopic steps, we developed a stopped flow absorbance assay to measure proton formation that occurs during catalysis. These studies provide direct evidence that formation of the enzyme-bound 3'-O(-) nucleophile is rate determining for chemistry. We additionally show that at low pH the chemical step is rate limiting for catalysis, but at high pH, a postchemistry conformational step is rate limiting due to a pH-dependent increase in the rate of nucleotidyl transfer. Finally, we performed exhaustive analyses of [Mg(2+)] and pH effects. In contrast to published studies, the results suggest an irregular pH dependence of k(pol), which is consistent with general base catalysis involving cooperativity between two or more protonic residues. Overall, the results represent significant advancement in the kinetic mechanism of Pol β and also reconcile some computational and experimental findings.     

Nucleotide binding interactions modulate dNTP selectivity and facilitate 8-oxo-dGTP incorporation by DNA polymerase lambda

8-Oxo-7,8,-dihydro-2′-deoxyguanosine triphosphate (8-oxo-dGTP) is a major product of oxidative damage in the nucleotide pool. It is capable of mispairing with adenosine (dA), resulting in futile, mutagenic cycles of base excision repair. Therefore, it is critical that DNA polymerases discriminate against 8-oxo-dGTP at the insertion step. Because of its roles in oxidative DNA damage repair and non-homologous end joining, DNA polymerase lambda (Pol λ) may frequently encounter 8-oxo-dGTP. Here, we have studied the mechanisms of 8-oxo-dGMP incorporation and discrimination by Pol λ. We have solved high resolution crystal structures showing how Pol λ accommodates 8-oxo-dGTP in its active site. The structures indicate that when mispaired with dA, the oxidized nucleotide assumes the mutagenic syn-conformation, and is stabilized by multiple interactions. Steady-state kinetics reveal that two residues lining the dNTP binding pocket, Ala⁵¹⁰ and Asn⁵¹³, play differential roles in dNTP selectivity. Specifically, Ala⁵¹⁰ and Asn⁵¹³ facilitate incorporation of 8-oxo-dGMP opposite dA and dC, respectively. These residues also modulate the balance between purine and pyrimidine incorporation. Our results shed light on the mechanisms controlling 8-oxo-dGMP incorporation in Pol λ and on the importance of interactions with the incoming dNTP to determine selectivity in family X DNA polymerases.     

Mouse Rev1 protein interacts with multiple DNA polymerases involved in translesion DNA synthesis

Pol kappa and Rev1 are members of the Y family of DNA polymerases involved in tolerance to DNA damage by replicative bypass [translesion DNA synthesis (TLS)]. We demonstrate that mouse Rev1 protein physically associates with Pol kappa. We show too that Rev1 interacts independently with Rev7 (a subunit of a TLS polymerase, Pol zeta) and with two other Y-family polymerases, Pol iota and Pol eta. Mouse Pol kappa, Rev7, Pol iota and Pol eta each bind to the same approximately 100 amino acid C-terminal region of Rev1. Furthermore, Rev7 competes directly with Pol kappa for binding to the Rev1 C-terminus. Notwithstanding the physical interaction between Rev1 and Pol kappa, the DNA polymerase activity of each measured by primer extension in vitro is unaffected by the complex, either when extending normal primer-termini, when bypassing a single thymine glycol lesion, or when extending certain mismatched primer termini. Our observations suggest that Rev1 plays a role(s) in mediating protein-protein interactions among DNA polymerases required for TLS. The precise function(s) of these interactions during TLS remains to be determined.     

Conformational changes during normal and error-prone incorporation of nucleotides by a Y-family DNA polymerase detected by 2-aminopurine fluorescence

Y-family polymerases are specialized to carry out DNA synthesis past sites of DNA damage. Their active sites make fewer contacts to their substrates, consistent with the remarkably low fidelity of these DNA polymerases when copying undamaged DNA. We have used DNA containing the fluorescent reporter 2-aminopurine (2-AP) to study the reaction pathway of the Y-family polymerase Dbh. We detected 3 rapid noncovalent steps between binding of a correctly paired dNTP and the rate-limiting step for dNTP incorporation. These early steps resemble those seen with high-fidelity DNA polymerases, such as Klenow fragment, and include a step that may be related to the unstacking of the 5' neighbor of the templating base that is seen in polymerase ternary complex crystal structures. A significant difference between Dbh and high-fidelity polymerases is that Dbh generates no fluorescence changes subsequent to dNTP binding if the primer lacks a 3'OH, suggesting that the looser active site of Y-family polymerases may enforce reliance on the correct substrate structure in order to assemble the catalytic center. Dbh, like other bypass polymerases of the DinB subgroup, generates single-base deletion errors at an extremely high frequency by skipping over a template base that is part of a repetitive sequence. Using 2-AP as a reporter to study the base-skipping process, we determined that Dbh uses a mechanism in which the templating base slips back to pair with the primer terminus while the base that was originally paired with the primer terminus becomes unpaired.