Alpha helix capping in synthetic model peptides by reciprocal side chain–main chain interactions: Evidence for an N terminal “capping box”

A significant fraction of the amino acids in proteins are alpha helical in conformation. Alpha helices in globular proteins are short, with an average length of about twelve residues, so that residues at the ends of helices make up an important fraction of all helical residues. In the middle of a helix, H-bonds connect the NH and CO groups of each residue to partners four residues along the chain. At the ends of a helix, the H-bond potential of the main chain remains unfulfilled, and helix capping interactions involving bonds from polar side chains to the NH or CO of the backbone have been proposed and detected. In a study of synthetic helical peptides, we have found that the sequence Ser-Glu-Asp-Glu stabilizes the alpha helix in a series of helical peptides with consensus sequences. Following the report by Harper and Rose, which identifies SerXaaXaaGlu as a member of a class of common motifs at the N termini of alpha helices in proteins that they refer to as “capping boxes,” we have reexamined the side chain–main chain interactions in a varient sequence using ¹H NMR, and find that the postulated reciprocal side chain-backbone bonding between the first Ser and last Glu side chains and their peptide NH partners can be resolved: Deletion of two residues N terminal to the Ser-Glu-Asp-Glu sequence in these peptides has no effect on the initiation of helical structure, as defined by two-dimensional (2D) NMR experiments on this variant. Thus the capping box sequence Ser-Glu-Asp-Glu inhibits N terminal fraying of the N terminus of alpha helix in these peptides, and shows the side chain–main chain interactions proposed by Harper and Rose. It thus acts as a helix initiating signal. Since normal a helix cannot propagate beyond the N terminus of this structure, the box acts as a termination signal in this direction as well. © 1994 John Wiley & Sons, Inc.     

Helix capping.

Helix-capping motifs are specific patterns of hydrogen bonding and hydrophobic interactions found at or near the ends of helices in both proteins and peptides. In an alpha-helix, the first four >N-H groups and last four >C=O groups necessarily lack intrahelical hydrogen bonds. Instead, such groups are often capped by alternative hydrogen bond partners. This review enlarges our earlier hypothesis (Presta LG, Rose GD. 1988. Helix signals in proteins. Science 240:1632-1641) to include hydrophobic capping. A hydrophobic interaction that straddles the helix terminus is always associated with hydrogen-bonded capping. From a global survey among proteins of known structure, seven distinct capping motifs are identified-three at the helix N-terminus and four at the C-terminus. The consensus sequence patterns of these seven motifs, together with results from simple molecular modeling, are used to formulate useful rules of thumb for helix termination. Finally, we examine the role of helix capping as a bridge linking the conformation of secondary structure to supersecondary structure.     

Conformational analysis of peptide fragments derived from the peripheral subunit-binding domain from the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus: evidence for nonrandom structure in the unfolded state

There is currently a great deal of interest in the early events in protein folding. Two issues that have generated particular interest are the nature of the unfolded state under native conditions and the role of local interactions in folding. Here, we report the results of a study of a set of peptides derived from a small two-helix protein, the peripheral subunit-binding domain of the pyruvate dehydrogenase multienzyme complex. Five peptides of overlapping sequence were prepared, including sequences corresponding to each of the helices and to the region connecting them. The peptides were characterized by CD and, where possible, nmr. A peptide corresponding to the second helix is between 12 and 17% helical at neutral pH. CD also indicates a lower percentage of helical structure in the peptide corresponding to the first alpha-helix, although the values of the alpha-proton chemical shifts suggest some preference for nonrandom structure. Peptides corresponding to the interhelical loop, which in the full domain contains two overlapping beta-turns and a 5-residue 3(10)-helix, are less structured. There is no significant change in the helicity of any of these peptides with pH. To test for fragment complementation, CD spectra of the two peptides derived from each helix and the long connecting peptide were compared to the spectra of each possible pair, as well as to a mixture containing all three. No increase in structure was observed. We complement our peptide studies by characterizing a point mutant, D34V, which disrupts a critical hydrogen bonding network. This mutant is unable to fold and provides a useful model of the denatured state. The mutant is between 9 and 16% helical as judged by CD. The modest amount of helical structure formed in some of the peptide fragments and in the point mutant suggests that the denatured state of the peripheral subunit binding domain is not completely unstructured. This may contribute to the very rapid folding observed for the intact protein.     

Importance of context in protein folding: secondary structural propensities versus tertiary contact-assisted secondary structure formation

Molecular dynamics simulations can be used to reveal the detailed conformational behaviors of peptides and proteins. By comparing fragment and full-length protein simulations, we can investigate the role of each peptide segment in the folding process. Here, we take advantage of information regarding the helix formation process from our previous simulations of barnase and protein A as well as new simulations of four helical fragments from these proteins at three different temperatures, starting with both helical and extended structures. Segments with high helical propensity began the folding process by tethering the chain through side chain interactions involving either polar interactions, such as salt bridges, or hydrophobic staples. These tethers were frequently nonnative (i.e., not i --> i + 4 spacing) and provided a scaffold for other residues, thereby limiting the conformational search. The helical structure then propagated on both sides of the tether. Segments with low stability and propensity formed later in the folding process and utilized contacts with other portions of the protein when folding. These helices formed via a tertiary contact-assisted mechanism, primarily via hydrophobic contacts between residues distant in sequence. Thus, segments with different helical propensities appear to play different roles during protein folding. Furthermore, the active role of nonlocal side chains in helix formation highlights why we must move beyond simple hierarchical models of protein folding.     

Role of recurrent hydrophobic residues in catalysis of helix formation by T cell-presented peptides in the presence of lipid vesicles

We tested the hypothesis that the recurrence of hydrophobic amino acids in a polypeptide at positions falling in an axial, hydrophobic strip if the sequence were coiled as an alpha helix, can lead to helical nucleation on a hydrophobic surface. The hydrophobic surface could anchor such residues, whereas the peptide sequence grows in a helical configuration that is stabilized by hydrogen bonds among carbonyl and amido NH groups along the peptidyl backbone of the helix, and by other intercycle interactions among amino acid side chains. Such bound, helical structures might protect peptides from proteases and/or facilitate transport to a MHC-containing compartment and thus be reflected in the selection of T cell-presented segments. Helical structure in a series of HPLC-purified peptides was estimated from circular dichroism measurements in: 1) 0.01 M phosphate buffer, pH 7.0, 2) that buffer with 45% trifluoroethanol (TFE), and 3) that buffer with di-O-hexadecyl phosphatidylcholine vesicles. By decreasing the dielectric constant of the buffer, TFE enhances intrapeptide interactions generally, whereas the lipid vesicles only provide a surface for hydrophobic interactions. The peptides varied in their strip-of-helix hydrophobicity indices (SOHHI; the mean Kyte-Doolittle hydrophobicities of residues in an axial strip of an alpha helix) and in proline content. Structural order for peptides with helical circular dichroism spectra was estimated as percentage helicity from circular dichroism theta 222 nm values and peptide concentration. A prototypic alpha helical peptide with three cycles plus two amino acids and an axial hydrophobic strip of four leucyl residues (SOHHI = 3.8) was disordered in phosphate buffer, 58% helical in that buffer with 48% TFE, and 36% helical in that buffer with vesicles. Percentage helicity in the presence of vesicles of the subset of peptides without proline followed their SOHHI values. Peptides with multiple prolyl residues had circular dichroism spectra with strong signals, but since they did not have altered spectra in the presence of vesicles relative to phosphate buffer alone, the hydrophobic surface of the vesicle did not appear to stabilize those structures.     

Structure, stability and folding of the alpha-helix

Pauling first described the alpha-helix nearly 50 years ago, yet new features of its structure continue to be discovered, using peptide model systems, site-directed mutagenesis, advances in theory, the expansion of the Protein Data Bank and new experimental techniques. Helical peptides in solution form a vast number of structures, including fully helical, fully coiled and partly helical. To interpret peptide results quantitatively it is essential to use a helix/coil model that includes the stabilities of all these conformations. Our models now include terms for helix interiors, capping, side-chain interactions, N-termini and 3(10)-helices. The first three amino acids in a helix (N1, N2 and N3) and the preceding N-cap are unique, as their amide NH groups do not participate in backbone hydrogen bonding. We surveyed their structures in proteins and measured their amino acid preferences. The results are predominantly rationalized by hydrogen bonding to the free NH groups. Stabilizing side-chain-side-chain energies, including hydrophobic interactions, hydrogen bonding and polar/non-polar interactions, were measured accurately in helical peptides. Helices in proteins show a preference for having approximately an integral number of turns so that their N- and C-caps lie on the same side. There are also strong periodic trends in the likelihood of terminating a helix with a Schellman or alpha L C-cap motif. The kinetics of alpha-helix folding have been studied with stopped-flow deep ultraviolet circular dichroism using synchrotron radiation as the light source; this gives a far superior signal-to-noise ratio than a conventional instrument. We find that poly(Glu), poly(Lys) and alanine-based peptides fold in milliseconds, with longer peptides showing a transient overshoot in helix content.     

Two peptide fragments G55-I72 and K97-A109 from staphylococcal nuclease exhibit different behaviors in conformational preferences for helix formation

Two synthetic peptides, SNasealpha1 and SNasealpha2, corresponding to residues G55-I72 and K97-A109, respectively, of staphylococcal nuclease (SNase), are adopted for detecting the role of helix alpha1 (E57-A69) and helix alpha2 (M98-Q106) in the initiation of folding of SNase. The helix-forming tendencies of the two SNase peptide fragments are investigated using circular dichroism (CD) and two-dimensional (2D) nuclear magnetic resonance (NMR) methods in water and 40% trifluoroethanol (TFE) solutions. The coil-helix conformational transitions of the two peptides in the TFE-H2O mixture are different from each other. SNasealpha1 adopts a low population of localized helical conformation in water, and shows a gradual transition to helical conformation with increasing concentrations of TFE. SNasealpha2 is essentially unstructured in water, but undergoes a cooperative transition to a predominantly helical conformation at high TFE concentrations. Using the NMR data obtained in the presence of 40% TFE, an ensemble of alpha-helical structures has been calculated for both peptides in the absence of tertiary interactions. Analysis of all the experimental data available indicates that formation of ordered alpha-helical structures in the segments E57-A69 and M98-Q106 of SNase may require nonlocal interactions through transient contact with hydrophobic residues in other parts of the protein to stabilize the helical conformations in the folding. The folding of helix alpha1 is supposed to be effective in initiating protein folding. The formation of helix alpha2 depends strongly on the hydrophobic environment created in the protein folding, and is more important in the stabilization of the tertiary conformation of SNase.     

Chain conformation in polyretropeptides III: Design of a 310 helix using α,α-dialkylated amino acids and retropeptide bonds

Computer simulations have been used to design a polypeptide with a 3₁₀ helix conformation. The study has been been performed taking advantage of the intrinsic helix forming tendency of α-Aminoisobutyric acid. In order to avoid the formation of the α helix, which is the other common helical conformation adopted by α-Aminoisobutyric acid-based peptides, retropeptide bonds have been included in the sequence. Thus, retropeptides are not able to form the intramolecular hydrogen bonding interactions characteristic of the α helix. The influences of both the peptide length and the solvent have been examined and compared with those of the polypeptide without retropeptide bonds. Proteins 29:575–582,1997. © 1997 Wiley-Liss, Inc.     

Phosphorylation of serine residues affects the conformation of the calmodulin binding domain of human protein 4.1.

We have previously characterized the calcium-dependent calmodulin (CaM)-binding domain (Ser76-Ser92) of the 135-kDa human protein 4.1 isoform using fluorescence spectroscopy and chemically synthesized nonphosphorylated or serine phosphorylated peptides [Leclerc, E. & Vetter, S. (1998) Eur. J. Biochem. 258, 567-671]. Here we demonstrate that phosphorylation of two serine residues within the 17-residue peptide alters their ability to adopt alpha helical conformation in a position-dependent manner. The helical content of the peptides was determined by CD-spectroscopy and found to increase from 36 to 45% for the Ser80 phosphorylated peptide and reduce to 28% for the Ser84 phosphorylated peptide; the di-phosphorylated peptide showed 32% helical content. Based on secondary structure prediction methods we propose that initial helix formation involves the central residues Leu82-Phe86. The ability of the peptides to adopt alpha helical conformations did not correlate with the observed binding affinities to CaM. We suggest that the reduced CaM-binding affinities observed for the phosphorylated peptides are more likely to be the result of unfavorable sterical and electrostatic interactions introduced into the CaM peptide-binding interface by the phosphate groups, rather than being due to the effect of phosphorylation on the secondary structure of the peptides.     

Design of stable α‐helices using global sequence optimization

The rational design of peptide and protein helices is not only of practical importance for protein engineering but also is a useful approach in attempts to improve our understanding of protein folding. Recent modifications of theoretical models of helix‐coil transitions allow accurate predictions of the helix stability of monomeric peptides in water and provide new possibilities for protein design. We report here a new method for the design of α‐helices in peptides and proteins using AGADIR, the statistical mechanical theory for helix‐coil transitions in monomeric peptides and the tunneling algorithm of global optimization of multidimensional functions for optimization of amino acid sequences. CD measurements of helical content of peptides with optimized sequences indicate that the helical potential of protein amino acids is high enough to allow formation of stable α‐helices in peptides as short as of 10 residues in length. The results show the maximum achievable helix content (HC) of short peptides with fully optimized sequences at 5 °C is expected to be ～70–75%. Under certain conditions the method can be a powerful practical tool for protein engineering. Unlike traditional approaches that are often used to increase protein stability by adding a few favorable interactions to the protein structure, this method deals with all possible sequences of protein helices and selects the best one from them. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Chain length effects on helix-hairpin distribution in short peptides with Aib-DAla and Aib-Aib segments

The Aib-D Ala dipeptide segment has a tendency to form both type-I'/III' and type-I/III β-turns. The occurrence of prime turns facilitates the formation of β-hairpin conformations, while type-I/III turns can nucleate helix formation. The octapeptide Boc-Leu-Phe-Val-Aib-DAla-Leu-Phe-Val-OMe (1) has been previously shown to form a β-hairpin in the crystalline state and in solution. The effects of sequence truncation have been examined using the model peptides Boc-Phe-Val-Aib-Xxx-Leu-Phe-NHMe (2, 6), Boc-Val-Aib-Xxx-Leu-NHMe (3, 7), and Boc-Aib-Xxx-NHMe (4, 8), where Xxx=DAla, Aib. For peptides with central Aib-Aib segments, Boc-Phe-Val-Aib-Aib-Leu-Phe-NHMe (6), Boc-Val-Aib-Aib-Leu-NHMe (7), and Boc-Aib-Aib-NHMe (8) helical conformations have been established by NMR studies in both hydrogen bonding (CD3OH) and non-hydrogen bonding (CDCl3) solvents. In contrast, the corresponding hexapeptide Boc-Phe-Val-Aib-DAla-Leu-Phe-Val-NHMe (2) favors helical conformations in CDCl3 and β-hairpin conformations in CD3 OH. The β-turn conformations (type-I'/III) stabilized by intramolecular 4→1 hydrogen bonds are observed for the peptide Boc-Aib-D Ala-NHMe (4) and Boc-Aib-Aib-NHMe (8) in crystals. The tetrapeptide Boc-Val-Aib-Aib-Leu-NHMe (7) adopts an incipient 3(10)-helical conformation stabilized by three 4→1 hydrogen bonds. The peptide Boc-Val-Aib-DAla-Leu-NHMe (3) adopts a novel α-turn conformation, stabilized by three intramolecular hydrogen bonds (two 4→1 and one 5→1). The Aib-DAla segment adopts a type-I' β-turn conformation. The observation of an NOE between Val (1) NH?HNCH3 (5) in CD3OH suggests, that the solid state conformation is maintained in methanol solutions.     

Solution structure of the osteogenic 1-31 fragment of the human parathyroid hormone

The solution conformations of a selectively osteogenic 1-31 fragment of the human parathyroid hormone (hPTH), hPTH(1-31)NH(2), have been characterized by use of very high field NMR spectroscopy at 800 MHz. The combination of the CalphaH proton and (13)Calpha chemical shifts, (3)J(NH)(alpha) coupling constants, NH proton temperature coefficients, and backbone NOEs reveals that the hPTH(1-31)NH(2) peptide has well-formed helical structures localized in two distinct segments of the polypeptide backbone. There are also many characteristic NOEs defining specific side-chain/backbone and side-chain/side-chain contacts within both helical structures. The solution structure of hPTH(1-31)NH(2) contains a short N-terminal helical segment for residues 3-11, including the helix capping residues 3 and 11 and a long C-terminal helix for residues 16-30. The two helical structures are reinforced by well-defined capping motifs and side-chain packing interactions within and at both ends of these helices. On one face of the C-terminal helix, there are side-chain pairs of Glu22-Arg25, Glu22-Lys26, and Arg25-Gln29 that can form ion-pair and/or hydrogen bonding interactions. On the opposite face of this helix, there are characteristic hydrophobic interactions involving the aromatic side chain of Trp23 packing against the aliphatic side chains of Leu15, Leu24, Lys27, and Leu28. There is also a linear array of hydrophobic residues from Val2, to Leu7, to Leu11 and continuing on to residues His14 and Leu15 in the hinge region and to Trp23 in the C-terminal helix. Capping and hydrophobic interactions at the end of the N-terminal and at the beginning of the C-terminal helix appear to consolidate the helical structures into a V-shaped overall conformation for at least the folded population of the hPTH(1-31)NH(2) peptide. Stabilization of well-folded conformations in this linear 1-31 peptide fragment and possibly other analogues of human PTH may have a significant impact on the biological activities of the PTH peptides in general and specifically for the osteogenic/anabolic activities of bone-building PTH analogues.     

Salt bridges do not stabilize polyproline II helices

Interactions between side chains, and in particular salt bridges, have been shown to be important in the stabilization of secondary structure. Here we investigate the contribution of a salt bridge formed between a lysine and a glutamate to the polyproline II (P(II)) helical content of proline-rich peptides. Since this structure has precisely three residues per turn, charged residues spaced three residues apart are on the same side of the helix and are best situated to interact. By contrast, computer simulations show that charged residues spaced four residues apart are both too far apart to interact strongly and are oriented such that interactions are unlikely. We have measured the P(II) content of peptides containing a lysine and glutamate pair spaced three or four residues apart using circular dichroism spectroscopy. Somewhat surprisingly we find that the P(II) content is insensitive to both the spacing and the pH. These findings indicate that i --> i + 3 salt bridges do not stabilize the P(II) helical conformation. The implications of these observations for both P(II) helix formation and denatured protein conformations are discussed.     

Helix packing motif common to the crystal structures of two undecapeptides containing dehydrophenylalanine residues: implications for the de novo design of helical bundle super secondary structural modules

De novo designed peptide based super secondary structures are expected to provide scaffolds for the incorporation of functional sites as in proteins. Self-association of peptide helices of similar screw sense, mediated by weak interactions, has been probed by the crystal structure determination of two closely related peptides: Ac-Gly1-Ala2-Delta Phe3-Leu4-Val5-DeltaPhe6-Leu7-Val8-DeltaPhe9-Ala10-Gly11-NH2 (I) and Ac-Gly1-Ala2-DeltaPhe3-Leu4-Ala5-DeltaPhe6-Leu7-Ala8-DeltaPhe9-Ala10-Gly11-NH2 (II). The crystal structures determined to atomic resolution and refined to R factors 8.12 and 4.01%, respectively, reveal right-handed 3(10)-helical conformations for both peptides. CD has also revealed the preferential formation of right-handed 3(10)-helical conformations for both molecules. Our aim was to critically analyze the packing of the helices in the solid state with a view to elicit clues for the design of super secondary structural motifs such as two, three, and four helical bundles based on helix-helix interactions. An important finding is that a packing motif could be identified common to both the structures, in which a given peptide helix is surrounded by six other helices reminiscent of transmembrane seven helical bundles. The outer helices are oriented either parallel or antiparallel to the central helix. The helices interact laterally through a combination of N--H...O, C--H...O, and C--H...pi hydrogen bonds. Layers of interacting leucine residues are seen in both peptide crystal structures. The packing of the peptide helices in the solid state appears to provide valuable leads for the design of super secondary structural modules such as two, three, or four helix bundles by connecting adjacent antiparallel helices through suitable linkers such as tetraglycine segments.     

Lipid-induced conformational changes in glucagon,secretin, and vasoactive intestinal peptide

The CD of glucagon, secretin, and vasoactive intestinal peptide has been studied as a function of temperature in water and in aqueous solutions of dodecyl sulfate, phosphatidyl glycerol, and L -α-phosphatidic acid (dipalmitoyl). The anionic detergent and lipids induce helix formation in all three peptides, with the amount of induced helical content increasing in the order glucagon < secretin < vasoactive intestinal peptide. These observations are subject to quantitative rationalization using a matrix formulation for the configuration partition function. In this formulation the major conformational consequences of the interaction with anionic lipids or detergents is an increase in the probability for helix formation by arginyl, histidyl, and lysyl residues. The region in which helix formation is maximal is found to be at amino acid residues 13–20 in all three peptides. Other studies have implicated this portion of the polypeptide chain in receptor binding. Thus, the helical segment induced by interaction with anionic lipids may play an important physiological role.     

The Val-210-Ile pathogenic Creutzfeldt-Jakob disease mutation increases both the helical and aggregation propensities of a sequence corresponding to helix-3 of PrP(C)

A peptide corresponding to the third helical region within the PrP(C) protein, from residues 198 to 218 (helix-3), was synthesised with and without the familial 210-Val to Ile Creutzfeldt-Jakob disease mutation. The NMR structure of PrP(C) predicts no global variation in stability for this mutation, indicating that local sequence rather than global structural factors are involved in the pathological effects of this mutation. 1H NMR analysis of peptides with and without this mutation indicated that it had no significant effect on local helical structure. Temperature denaturation studies monitored by CD showed that the mutation increased the helical content within this region (helical propensity), but did not stabilise the helix toward denaturation (helical stability). Aggregation data indicated that, in addition to increasing helical propensity, this mutation increased the aggregation propensity of this sequence. CD and NMR data indicate that helical interactions, stabilised by the Val-210-Ile mutation, may precede the formation of beta-sheet aggregates in this peptide sequence. Therefore, this pathological mutation probably does not facilitate PrP(C) to PrP(Sc) conversion by directly destabilising the helical structure of PrP(C), but may preferentially stabilise PrP(Sc) by facilitating beta-sheet formation within this sequence region of PrP. In addition, helical interactions between helix-3 in two or more PrP(C) molecules may promote conversion to PrP(Sc).     

Stabilizing nonpolar/polar side-chain interactions in the alpha-helix.

A simplistic, yet often used, view of protein stability is that amino acids attract other amino acids with similar polarity, whereas nonpolar and polar side chains repel. Here we show that nonpolar/polar interactions, namely Val or Ile bonding to Lys or Arg in alpha-helices, can in fact be stabilizing. Residues spaced i, i + 4 in alpha-helices are on the same face of the helix, with potential to favorably interact and stabilize the structure. We observe that the nonpolar/polar pairs Ile-Lys, Ile-Arg, and Val-Lys occur in protein helices more often than expected when spaced i, i + 4. Partially helical peptides containing pairs of nonpolar/polar residues were synthesized. Controls with i, i + 5 spacing have the residues on opposite faces of the helix and are less helical than the test peptides with the i, i + 4 interactions. Experimental circular dichroism results were analyzed with helix-coil theory to calculate the free energy for the interactions. All three stabilize the helix with DeltaG between -0.14 and -0.32 kcal x mol(-1). The interactions are hydrophobic with contacts between Val or Ile and the alkyl groups in Arg or Lys. Side chains such as Lys and Arg can thus interact favorably with both polar and nonpolar residues.     

Design and characterization of a model αβ peptide

CD and nmr spectroscopy were used to compare the conformational properties of two related peptides. One of the peptides, Model AB, was designed to adopt a helix-turn-extended strand (αβ) tertiary structure in water that might be stabilized by hydrophobic interactions between two leucine residues in the amino-terminal segment and two methionine residues in the carboxyl terminal segment. The other peptide, AB Helix, has the same amino acid sequence as Model AB except that it lacks the-Pro-Met-Thr-Met-Thr-Gly segment at the carboxyl-terminus. Although the carboxyl-terminal segment of Model AB was found to be unstructured, its presence increases the number of residues in a helical conformation, shifts the pKas of three ionizable side chains by 1 pH unit or more compared to an unstructured peptide, stabilizes the peptide as a monomer in high concentrations of ammonium sulfate, increases the conformational stability of residues at the terminal ends of the helix, and results in many slowly exchanging amide protons throughout the entire backbone of the peptide. These results suggest that interactions between adjacent segments in a small peptide can have significant structure organizing effects. Similar kinds of interactions may be important in determining the structure of early intermediates in protein folding and may be useful in the de novo design of independently folding peptides. © 1995 John Wiley & Sons, Inc.     

Folding propensities of peptide fragments of myoglobin.

Myoglobin has been studied extensively as a paradigm for protein folding. As part of an ongoing study of potential folding initiation sites in myoglobin, we have synthetized a series of peptides covering the entire sequence of sperm whale myoglobin. We report here on the conformation preferences of a series of peptides that cover the region from the A helix to the FG turn. Structural propensities were determined using circular dichroism and nuclear magnetic resonance spectroscopy in aqueous solution, trifluoroethanol, and methanol. Peptides corresponding to helical regions in the native protein, namely the B, C, D, and E helices, populate the alpha region of (phi, psi) space in water solution but show no measurable helix formation except in the presence of trifluoroethanol. The F-helix sequence has a much lower propensity to populate helical conformations even in TFE. Despite several attempts, we were not successful in synthesizing a peptide corresponding to the A-helix region that was soluble in water. A peptide termed the AB domain was constructed spanning the A- and B-helix sequences. The AB domain is not soluble in water, but shows extensive helix formation throughout the peptide when dissolved in methanol, with a break in the helix at a site close to the A-B helix junction in the intact folded myoglobin protein. With the exception of one local preference for a turn conformation stabilized by hydrophobic interactions, the peptides corresponding to turns in the folded protein do not measurably populate beta-turn conformations in water, and the addition of trifluoroethanol does not enhance the formation of either helical or turn structure. In contrast to the series of peptides described here, either studies of peptides from the GH region of myoglobin show a marked tendency to populate helical structures (H), nascent helical structures (G), or turn conformations (GH peptide) in water solution. This region, together with the A-helix and part of the B-helix, has been shown to participate in an early folding intermediate. The complete analysis of conformational properties of isolated myoglobin peptides supports the hypothesis that spontaneous secondary structure formation in local regions of the polypeptide may play an important role in the initiation of protein folding.     

Helix propagation in trifluoroethanol solutions.

Helix propagation of the S-peptide sequence (residues 1-19 of ribonuclease A) in 2,2,2-trifluoroethanol (TFE) solutions has been investigated with CD and nmr Overhauser effect spectroscopies. In this study, the S-peptide helix is covalently initiated at the N-terminus through disulfide bonds to a helix scaffold derived from the N-terminal sequence of the bee venom peptide apamin. The entire S-peptide sequence of this hybrid sequence peptide becomes helical at high proportions of TFE. Residues 14-19 of the S-peptide are not helical in the free peptide in TFE, nor are they helical in ribonuclease A. The "helix stop" signal encoded by the S-peptide sequence near residue 13 does not persist at high TFE with this hybrid sequence peptide. The helix-stabilizing effects of TFE are due at least in part to facilitated propagation of an extant helix. This stabilizing effect appears to be a general solvation effect and not due to specific interaction of the helical peptide with TFE. Specifically these data support the idea that TFE destabilizes the coil state by less effective hydrogen bonding of the peptide amide to the solvent.