Electron Tomography of Cryofixed,Isometrically Contracting Insect Flight Muscle Reveals Novel Actin-Myosin Interactions

Background

Isometric muscle contraction, where force is generated without muscle shortening, is a molecular traffic jam in which the number of actin-attached motors is maximized and all states of motor action are trapped with consequently high heterogeneity. This heterogeneity is a major limitation to deciphering myosin conformational changes in situ.

Methodology

We used multivariate data analysis to group repeat segments in electron tomograms of isometrically contracting insect flight muscle, mechanically monitored, rapidly frozen, freeze substituted, and thin sectioned. Improved resolution reveals the helical arrangement of F-actin subunits in the thin filament enabling an atomic model to be built into the thin filament density independent of the myosin. Actin-myosin attachments can now be assigned as weak or strong by their motor domain orientation relative to actin. Myosin attachments were quantified everywhere along the thin filament including troponin. Strong binding myosin attachments are found on only four F-actin subunits, the “target zone”, situated exactly midway between successive troponin complexes. They show an axial lever arm range of 77°/12.9 nm. The lever arm azimuthal range of strong binding attachments has a highly skewed, 127° range compared with X-ray crystallographic structures. Two types of weak actin attachments are described. One type, found exclusively in the target zone, appears to represent pre-working-stroke intermediates. The other, which contacts tropomyosin rather than actin, is positioned M-ward of the target zone, i.e. the position toward which thin filaments slide during shortening.

Conclusion

We present a model for the weak to strong transition in the myosin ATPase cycle that incorporates azimuthal movements of the motor domain on actin. Stress/strain in the S2 domain may explain azimuthal lever arm changes in the strong binding attachments. The results support previous conclusions that the weak attachments preceding force generation are very different from strong binding attachments.     

A modelized distribution of actomyosin interactions in the vertebrate cardiac muscle

Preliminary assumption of this model is that interactions between actin and myosin presupposes an exact three-dimensional geometrical correspondence between sites, due to the very short time constants present under physiological conditions. Only small and controlled torsions of the actin filaments are accepted. The model uses geometrical information concerning orientations and dimensions of myosin crossbridges and actin monomeres to modelize the distribution of their inter-actions. An orientation map of actin sites in the cross-section perpendicular to the filament axis is proposed, adapted to the specific filament array of vertebrate muscle. Orientation of myosin crossbridges follows Luther's rules. According to the model, any interaction between actin and myosin implies the superimposition of their respective cross-sectional planes. The axial length of actin monomere is 55 A; the distance between two crossbridges along the myosin filament axis is 143 A. The following properties are derived: 1) The shortening step of the sliding actin filament must be a multiple of 11 A (highest common factor). Taking into account the staggered disposition of the two actin strands and the presence of two heads for each cross-bridge, the most probable value for this shortening step is equal to 99 A. A specific scheme is proposed to describe the shortening process. The behavior of the modelized crossbridge does not need any elastic structure--2) Planes situated at 715 A (lowest common multiple) of actin and myosin coinciding planes are also in coincidence. In a hemi-sarcomere the maximal number of these planes, referred to as simultaneously activable planes, is 10 (20 if both myosin heads are considered). The proportion of interactions authorized by the site orientations is 1/12. In the model, the concept of randomly recruited crossbridges is replaced by a discretized recruitment, based on geometrical properties at an ultrastructural level. The proposed distribution is homogeneous: it can be extended radially in the sarcomere and authorizes the actin filament sliding in the whole physiological range under the control of a dual activation function, reproducing Ca++ temporal and spatial distribution.     

Cross-bridge number, position, and angle in target zones of cryofixed isometrically active insect flight muscle

Electron micrographic tomograms of isometrically active insect flight muscle, freeze substituted after rapid freezing, show binding of single myosin heads at varying angles that is largely restricted to actin target zones every 38.7 nm. To quantify the parameters that govern this pattern, we measured the number and position of attached myosin heads by tracing cross-bridges through the three-dimensional tomogram from their origins on 14.5-nm-spaced shelves along the thick filament to their thin filament attachments in the target zones. The relationship between the probability of cross-bridge formation and axial offset between the shelf and target zone center was well fitted by a Gaussian distribution. One head of each myosin whose origin is close to an actin target zone forms a cross-bridge most of the time. The probability of cross-bridge formation remains high for myosin heads originating within 8 nm axially of the target zone center and is low outside 12 nm. We infer that most target zone cross-bridges are nearly perpendicular to the filaments (60% within 11 degrees ). The results suggest that in isometric contraction, most cross-bridges maintain tension near the beginning of their working stroke at angles near perpendicular to the filament axis. Moreover, in the absence of filament sliding, cross-bridges cannot change tilt angle while attached nor reach other target zones while detached, so may cycle repeatedly on and off the same actin target monomer.     

Sliding distance per ATP molecule hydrolyzed by myosin heads during isotonic shortening of skinned muscle fibers.

We measured isotonic sliding distance of single skinned fibers from rabbit psoas muscle when known and limited amounts of ATP were made available to the contractile apparatus. The fibers were immersed in paraffin oil at 20 degrees C, and laser pulse photolysis of caged ATP within the fiber initiated the contraction. The amount of ATP released was measured by photolyzing 3H-ATP within fibers, separating the reaction products by high-pressure liquid chromatography, and then counting the effluent peaks by liquid scintillation. The fiber stiffness was monitored to estimate the proportion of thick and thin filament sites interacting during filament sliding. The interaction distance, Di, defined as the sliding distance while a myosin head interacts with actin in the thin filament per ATP molecule hydrolyzed, was estimated from the shortening distance, the number of ATP molecules hydrolyzed by the myosin heads, and the stiffness. Di increased from 11 to 60 nm as the isotonic tension was reduced from 80% to 6% of the isometric tension. Velocity and Di increased with the concentration of ATP available. As isotonic load was increased, the interaction distance decreased linearly with decrease of the shortening velocity and extrapolated to 8 nm at zero velocity. Extrapolation of the relationship between Di and velocity to saturating ATP concentration suggests that Di reaches 100-190 nm at high shortening velocity. The interaction distance corresponds to the sliding distance while cross-bridges are producing positive (working) force plus the distance while they are dragging (producing negative forces). The results indicate that the working and drag distances increase as the velocity increases. Because Di is larger than the size of either the myosin head or the actin monomer, the results suggest that for each ATPase cycle, a myosin head interacts mechanically with several actin monomers either while working or while producing drag.     

Structural elements of z-disks

Structural features of the Z-line were examined in negative stained rabbit psoas myofibrils. The data obtained allow to conclude that: 1) the amount of overlap of actin-containing filaments from apposing sarcomeres is about 50 nm; 2) there are five bands of extra density separated by the distances approximately 20 nm across entire Z-line width, and three central of these bands are localized in the actin overlap region; 3) the axial repeating distance between Z-filament attachment sites on thin filament is found to be 17-20 nm. A model for the array of cross-bridges between action-containing filaments in Z-line is presented.     

Studies on the nature of the Z-discs in skeletal muscle fibres of sharks, Etmopterus spinax L. and Galeus melastomus Rafinesque-Schmaltz

The ultrastructural details of Z-discs from red, intermediate, and white axial muscle fibres from the sharks Etmopterus spinax and Galeus melastomus are described. Red fibre Z-discs contain the most amorphous matrix material, and are thicker (100–115 nm) than intermediate (85–88 nm) and white Z-discs (75–80 nm). Four sets of oblique bars extend tangentially from each thin filament. In each set two bars are present, those of white fibres are close together (approximately 5 nm), while those of red fibres are separated by a distance of 15 nm. A model of shark Z-disc structure is proposed. The denaturation (heat transition) temperatures of the muscle proteins were studied by differential scanning calorimetry (DSC). The heat transitions of collagen, actin, and myosin were identified; the actin heat transition temperature increased in the sequence red, intermediate, and white. The total protein pattern of red and white muscle were studied by SDS electrophoresis. A protein with a molecular weight of about 55000 may represent a Z-disc protein.     

Extensibility and symmetry of actin filaments in contracting muscles

When isometrically contracting muscles are subjected to a quick release followed by a shortening ramp of appropriate speed (V(o)), tension decays from its value at the isometric plateau (P(o)) to <0. 05 P(o) with the same time course as the quick part of the release; thereafter, tension remains at a negligible level for the duration of the shortening ramp. X-ray diffraction data obtained under these conditions provide evidence that 1) at V(o) very few heads form an actomyosin complex, while the number of heads doing so at P(o) is significant; 2) relative to rest the actin filament at V(o) is approximately 0.12% shorter and more twisted, while it is approximately 0.3% longer and less twisted at P(o); and 3) the myosin heads attaching to actin during force development do so against a thin filament compliance of at least 0.646 +/- 0.046% nm per P(o).     

Purification, Ultrastructure, and Composition of Axial Filaments from Leptospira

The ultrastructure of three strains of water Leptospira was studied by negative staining, thin sectioning, and freeze-etching. The cells possessed a triple-layered sheath which covered two independent axial filaments, one inserted subterminally in each end of the cell. The protoplasmic cylinder was surrounded by a triple-layered cell wall and possessed ribosomes, lamellar structures, and a typical procaryotic nuclear region. The axial filament was comprised of several component structures. An axial fibril, with a diameter of 20 to 25 nm, consisted of a solid inner core (13 to 16 nm in diameter) surrounded by a coat. A terminal knob (40 to 70 nm in length) was connected to a series of disc insertion structures at the terminal end of the axial fibril. The axial fibril was surrounded by a helical outer coat (35 to 60 nm in diameter) which was composed of a continuously coiled fiber, 3 to 4 nm in diameter, embedded in an electron-dense material. A procedure for the purification of the axial fibrils was presented and their ultrastructural, physical, and chemical properties were determined. Similarities in ultrastructural, physical, and chemical properties were noted between the axial fibrils and bacterial flagella. A schematic model of the leptospiral axial filament is presented, and a mechanism is proposed for its function as a locomotor organelle.     

Organization of Actin Filaments in the Axial Rod of Abalone Sperm Revealed by Quick Freeze Technique

An axial rod in abalone ( Haliotis discus ) sperm is a structure composed of a bundle of actin filaments, which elongates anteriorly to form the acrosomal process during the acrosome reaction. The ultrastructure of the actin filament bundle constituting the axial rod was examined using quick freeze technique followed by either freeze-substitution or deep-etch electron microscopy. Thin sections of quick freeze and freeze-substituted sperm revealed that the actin filaments in the axial rod are hexagonally packed in a paracrystalline array through its almost entire length with an average center-to-center spacing of 12 nm. Periodic transverse bands were also observed across the actin filament bundle, which may reflect the cross-bridges interconnecting the adjacent filaments. Quick-freeze deep-etch analysis provided the three-dimensional view of the axial rod. Actin filaments exhibiting 5.5–6 nm spaced striations were observed to run in parallel with each other inside the axial rod. The existence of cross-bridging structures was also displayed between adjacent filaments. These results suggest that the actin filaments in the axial rod are probably held together by regularly spaced cross-bridges to form a well ordered hexagonally packed bundle, and also cross-linked by fibrous structure to the lateral inner acrosomal membrane which closely surrounds the anterior half of the actin filament bundle.     

Cross-bridge attachment during high-speed active shortening of skinned fibers of the rabbit psoas muscle: implications for cross-bridge action during maximum velocity of filament sliding

To characterize the kinetics of cross-bridge attachment to actin during unloaded contraction (maximum velocity of filament sliding), ramp-shaped stretches with different stretch-velocities (2-40,000 nm per half-sarcomere per s) were applied to actively contracting skinned fibers of the rabbit psoas muscle. Apparent fiber stiffness observed during such stretches was plotted versus the speed of the imposed stretch (stiffness-speed relation) to derive the rate constants for cross-bridge dissociation from actin. The stiffness-speed relation obtained for unloaded shortening conditions was shifted by about two orders of magnitude to faster stretch velocities compared to isometric conditions and was almost identical to the stiffness-speed relation observed in the presence of MgATPgammaS at high Ca(2+) concentrations, i.e., under conditions where cross-bridges are weakly attached to the fully Ca(2+) activated thin filaments. These data together with several control experiments suggest that, in contrast to previous assumptions, most of the fiber stiffness observed during high-speed shortening results from weak cross-bridge attachment to actin. The fraction of strongly attached cross-bridges during unloaded shortening appears to be as low as some 1-5% of the fraction present during isometric contraction. This is about an order of magnitude less than previous estimates in which contribution of weak cross-bridge attachment to observed fiber stiffness was not considered. Our findings imply that 1) the interaction distance of strongly attached cross-bridges during high-speed shortening is well within the range consistent with conventional cross-bridge models, i.e., that no repetitive power strokes need to be assumed, and 2) that a significant part of the negative forces that limit the maximum speed of filament sliding might originate from weak cross-bridge interactions with actin.     

Nebulin, a helical actin binding protein.

Nebulin, a giant protein (molecular mass 800 kDa) specific for the skeletal muscle of vertebrates, has been suggested to be involved in the length regulation of the thin filament as a 'molecular ruler'. Despite its size, nebulin appears to be composed mainly of small repeats of approximately 35 amino acids. We have characterized in this study the conformational and functional properties of single repeats. Complete repeats were found to bind to F-actin while a truncated one did not. One repeat is therefore the smallest unit for nebulin--actin interaction. Circular dichroism and nuclear magnetic resonance spectra measured for the peptides in water indicated a transient helical conformation. The folded region is located for them all around the conserved sequence SDxxYK. The helical conformation is strongly stabilized by anionic detergents and trifluoroethanol while uncharged or positively charged detergents have no effect. Since the surface of the actin filament is known to contain clusters of negative charges, anionic detergents may mimic the effect of an actin environment. 3D structures were calculated for three representative peptides in SDS. In vivo, the nebulin helices should form a complex with the actin filament. Based on the assumed importance of charge interactions between nebulin and actin, we propose a model for the structure of the F-actin-nebulin complex in vivo. According to that, two nebulin molecules occupy symmetrical positions along the central cleft of the actin filament bridging the two strands of the actin two-start helix. The consistency of this model with experimental data is discussed.     

X-ray diffraction evidence for the extensibility of actin and myosin filaments during muscle contraction.

To clarify the extensibility of thin actin and thick myosin filaments in muscle, we examined the spacings of actin and myosin filament-based reflections in x-ray diffraction patterns at high resolution during isometric contraction of frog skeletal muscles and steady lengthening of the active muscles using synchrotron radiation as an intense x-ray source and a storage phosphor plate as a high sensitivity, high resolution area detector. Spacing of the actin meridional reflection at approximately 1/2.7 nm-1, which corresponds to the axial rise per actin subunit in the thin filament, increased about 0.25% during isometric contraction of muscles at full overlap length of thick and thin filaments. The changes in muscles stretched to approximately half overlap of the filaments, when they were scaled linearly up to the full isometric tension, gave an increase of approximately 0.3%. Conversely, the spacing decreased by approximately 0.1% upon activation of muscles at nonoverlap length. Slow stretching of a contracting muscle increased tension and increased this spacing over the isometric contraction value. Scaled up to a 100% tension increase, this corresponds to a approximately 0.26% additional change, consistent with that of the initial isometric contraction. Taken together, the extensibility of the actin filament amounts to 3-4 nm of elongation when a muscle switches from relaxation to maximum isometric contraction. Axial spacings of the layer-line reflections at approximately 1/5.1 nm-1 and approximately 1/5.9 nm-1 corresponding to the pitches of the right- and left-handed genetic helices of the actin filament, showed similar changes to that of the meridional reflection during isometric contraction of muscles at full overlap. The spacing changes of these reflections, which also depend on the mechanical load on the muscle, indicate that elongation is accompanied by slight changes of the actin helical structure possibly because of the axial force exerted by the actomyosin cross-bridges. Additional small spacing changes of the myosin meridional reflections during length changes applied to contracting muscles represented an increase of approximately 0.26% (scaled up to a 100% tension increase) in the myosin periodicity, suggesting that such spacing changes correspond to a tension-related extension of the myosin filaments. Elongation of the myosin filament backbone amounts to approximately 2.1 nm per half sarcomere. The results indicate that a large part (approximately 70%) of the sarcomere compliance of an active muscle is caused by the extensibility of the actin and myosin filaments; 42% of the compliance resides in the actin filaments, and 27% of it is in the myosin filaments.     

Protein osmotic pressure and cross-bridge attachment determine the stiffness of thin filaments in muscle ex vivo

The properties of some models of the actin filament are compared with those of the thin filament in muscle. The greater stiffness of thin filaments ex vivo with respect to F-actin in vitro is attributed to the effect of both protein osmotic pressure and the attached cross-bridges. By comparing the stiffness of thin filaments in vitro and in isometric and rigor muscles the stiffness of thin filaments in relaxed muscle is computed. The upper limit of thin filament stretching is deduced to approach approximately 10 nm microm(-1). It is also calculated that, on stretching by 2.02 nm of the fully non-overlapped thin filament or by 1.59 nm of the thin filament on isometric contraction, the energy released on the hydrolysis of one molecule of ATP is fully used up.     

Mechanics and models of the myosin motor

In striated muscles, shortening comes about by the sliding movement of thick filaments, composed mostly of myosin, relative to thin filaments, composed mostly of actin. This is brought about by cyclic action of 'cross-bridges' composed of the heads of myosin molecules projecting from a thick filament, which attach to an adjacent thin filament, exert force for a limited time and detach, and then repeat this cycle further along the filament. The requisite energy is provided by the hydrolysis of a molecule of adenosine triphosphate to the diphosphate and inorganic phosphate, the steps of this reaction being coupled to mechanical events within the cross-bridge. The nature of these events is discussed. There is good evidence that one of them is a change in the angle of tilt of a 'lever arm' relative to the 'catalytic domain' of the myosin head which binds to the actin filament. It is suggested here that this event is superposed on a slower, temperature-sensitive change in the orientation of the catalytic domain on the actin filament. Many uncertainties remain.     

The native membrane fusion machinery in cells.

Recombinant SNAREs have been demonstrated as the minimal membrane fusion machinery. The participation of additional proteins in the regulation of membrane fusion has been suggested. In this study we provide nanometer-resolution images of native NSF oligomers and SNARE complexes isolated from neurons and the pancreas. Our study reveals the presence of new coiled rod-like structures in association with the SNARE complex only in neuronal tissue. Neuronal SNAREs were found coiled and super-coiled with these structures. The existence of NSF as pentamers in its native state is also demonstrated. The extent of coiling and super-coiling of SNAREs may regulate the potency and efficacy of membrane fusion in cells.     

Models of contractile units and their assembly in smooth muscle

It is believed that the contractile filaments in smooth muscle are organized into arrays of contractile units (similar to the sarcomeric structure in striated muscle), and that such an organization is crucial for transforming the mechanical activities of actomyosin interaction into cell shortening and force generation. Details of the filament organization, however, are still poorly understood. Several models of contractile filament architecture are discussed here. To account for the linear relationship observed between the force generated by a smooth muscle and the muscle length at the plateau of an isotonic contraction, a model of contractile unit is proposed. The model consists of 2 dense bodies with actin (thin) filaments attached, and a myosin (thick) filament lying between the parallel thin filaments. In addition, the thick filament is assumed to span the whole contractile unit length, from dense body to dense body, so that when the contractile unit shortens, the amount of overlap between the thick and thin filaments (i.e., the distance between the dense bodies) decreases in exact proportion to the amount of shortening. Assembly of the contractile units into functional contractile apparatus is assumed to involve a group of cells that form a mechanical syncytium. The contractile apparatus is assumed malleable in that the number of contractile units in series and in parallel can be altered to accommodate strains on the muscle and to maintain the muscle's optimal mechanical function.     

Thin filament length regulation in striated muscle sarcomeres: pointed-end dynamics go beyond a nebulin ruler

The actin (thin) filaments in striated muscle are highly regulated and precisely specified in length to optimally overlap with the myosin (thick) filaments for efficient myofibril contraction. Here, we review and critically discuss recent evidence for how thin filament lengths are controlled in vertebrate skeletal, vertebrate cardiac, and invertebrate (arthropod) sarcomeres. Regulation of actin polymerization dynamics at the slow-growing (pointed) ends by the capping protein tropomodulin provides a unified explanation for how thin filament lengths are physiologically optimized in all three muscle types. Nebulin, a large protein thought to specify thin filament lengths in vertebrate skeletal muscle through a ruler mechanism, may not control pointed-end actin dynamics directly, but instead may stabilize a large core region of the thin filament. We suggest that this stabilizing function for nebulin modifies the lengths primarily specified by pointed-end actin dynamics to generate uniform filament lengths in vertebrate skeletal muscle. We suggest that nebulette, a small homolog of nebulin, may stabilize a correspondingly shorter core region and allow individual thin filament lengths to vary according to working sarcomere lengths in vertebrate cardiac muscle. We present a unified model for thin filament length regulation where these two mechanisms cooperate to tailor thin filament lengths for specific contractile environments in diverse muscles.     

Myosin filament polymerization and depolymerization in a model of partial length adaptation in airway smooth muscle

Length adaptation in airway smooth muscle (ASM) is attributed to reorganization of the cytoskeleton, and in particular the contractile elements. However, a constantly changing lung volume with tidal breathing (hence changing ASM length) is likely to restrict full adaptation of ASM for force generation. There is likely to be continuous length adaptation of ASM between states of incomplete or partial length adaption. We propose a new model that assimilates findings on myosin filament polymerization/depolymerization, partial length adaptation, isometric force, and shortening velocity to describe this continuous length adaptation process. In this model, the ASM adapts to an optimal force-generating capacity in a repeating cycle of events. Initially the myosin filament, shortened by prior length changes, associates with two longer actin filaments. The actin filaments are located adjacent to the myosin filaments, such that all myosin heads overlap with actin to permit maximal cross-bridge cycling. Since in this model the actin filaments are usually longer than myosin filaments, the excess length of the actin filament is located randomly with respect to the myosin filament. Once activated, the myosin filament elongates by polymerization along the actin filaments, with the growth limited by the overlap of the actin filaments. During relaxation, the myosin filaments dissociate from the actin filaments, and then the cycle repeats. This process causes a gradual adaptation of force and instantaneous adaptation of shortening velocity. Good agreement is found between model simulations and the experimental data depicting the relationship between force development, myosin filament density, or shortening velocity and length.     

Kinetics of thin filament activation probed by fluorescence of N-((2-(Iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1, 3-diazole-labeled troponin I incorporated into skinned fibers of rabbit psoas muscle: implications for regulation of muscle contraction

Making use of troponin with fluorescently labeled troponin I subunit (N-((2-(iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1, 3-diazole-troponin I, IANBD-TnI) that had previously been described in solution studies as a probe for thin filament activation (. Proc. Natl. Acad. Sci. 77:7209-7213), we present a new approach that allows the kinetics of thin filament activation to be studied in skinned muscle fibers. After the exchange of native troponin for fluorescently labeled troponin, the fluorescence intensity is sensitive to both changes in calcium concentration and actin attachment of cross-bridges in their strong binding states (. Biophys. J. 77:000-000). Imposing rapid changes in the fraction of strongly attached cross-bridges, e.g., by switching from isometric contraction to high-speed shortening, causes changes in thin filament activation at fixed Ca(2+) concentrations that can be followed by recording fluorescence intensity. Upon changing to high-speed shortening we observed small (<20%) changes in fluorescence that became faster at higher Ca(2+) concentrations. At all Ca(2+) concentrations, these changes are more than 10-fold faster than force redevelopment subsequent to the period of unloaded shortening. We interpret this as an indication that equilibration among different states of the thin filament is rapid and becomes faster as Ca(2+) is raised. Fast equilibration suggests that the rate constant of force redevelopment is not limited by changes in the activation level of thin filaments induced by the isotonic contraction before force redevelopment. Instead, our modeling shows that, in agreement with our previous proposal for the regulation of muscle contraction, a rapid and Ca(2+)-dependent equilibration among different states of the thin filament can fully account for the Ca(2+) dependence of force redevelopment and the fluorescence changes described in this study.     

X-ray diffraction studies on oriented gels of vertebrate smooth muscle thin filaments.

The ATPase activity of acto-myosin subfragment 1 (S1) at low ratios of S1 to actin in the presence of tropomyosin is dependent on the tropomyosin source and ionic conditions. Whereas skeletal muscle tropomyosin causes a 60% inhibitory effect at all ionic strengths, the effect of smooth muscle tropomyosin was found to be dependent on the ionic strength. At low ionic strength (20 mM) smooth muscle tropomyosin inhibits the ATPase activity by 60%, while at high ionic strength (120 mM) it potentiates the ATPase activity three- to five-fold. Therefore, the difference in the effect of smooth muscle and skeletal muscle tropomyosin on the acto-S1 ATPase activity was due to a greater fraction of the tropomyosin-actin complex being turned on in the absence of S1 with smooth muscle tropomyosin than with skeletal muscle tropomyosin. Using well-oriented gels of actin and of reconstituted specimens from vertebrate smooth muscle thin filament proteins suitable for X-ray diffraction, we localized the position of tropomyosin on actin under different levels of acto-S1 ATPase activity. By analysing the equatorial X-ray pattern of the oriented specimens in combination with solution scattering experiments, we conclude that tropomyosin is located at a binding radius of about 3.5 nm on the f-actin helix under all conditions studied. Furthermore, we find no evidence that the azimuthal position of tropomyosin is different for smooth muscle tropomyosin at various ionic strengths, or vertebrate tropomyosin, since the second actin layer-line intensity (at 17.9 nm axial and 4.3 nm radial spacing), which was shown in skeletal muscle to be a sensitive measure of this parameter, remains strong and unchanged. Differences in the ATPase activity are not necessarily correlated with different positions of tropomyosin on f-actin. The same conclusion is drawn from our observations that, although the regulatory protein caldesmon inhibits the ATPase activity in native and reconstituted vertebrate smooth muscle thin filaments at a molar ratio of actin/tropomyosin/caldesmon of 28:7:1, the second actin layer-line remains strong. Only adding caldesmon in excess reduces the intensity of the second actin layer-line, from which the binding radius of caldesmon can be estimated to be about 4 nm. The lack of predominant meridional reflections in oriented specimens, with caldesmon present, suggests that caldesmon does not project away from the thin filament as troponin molecules in vertebrate striated muscle in agreement with electron micrographs of smooth muscle thin filaments. In freshly prepared native smooth muscle thin filaments we observed a Ca(2+)-sensitive reversible bundling effect.(ABSTRACT TRUNCATED AT 400 WORDS)