In vitro biocompatibility of schwann cells on surfaces of biocompatible polymeric electrospun fibrous and solution-cast film scaffolds

The in vitro responses of Schwann cells (RT4-D6P2T, a schwannoma cell line derived from a chemically induced rat peripheral neurotumor) on various types of electrospun fibrous scaffolds of some commercially available biocompatible and biodegradable polymers, i.e., poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), polycaprolactone (PCL), poly(l-lactic acid) (PLLA), and chitosan (CS), were reported in comparison with those of the cells on corresponding solution-cast film scaffolds as well as on a tissue-culture polystyrene plate (TCPS), used as the positive control. At 24 h after cell seeding, the viability of the attached cells on the various substrates could be ranked as follows: PCL film > TCPS > PCL fibrous > PLLA fibrous > PHBV film > CS fibrous approximately CS film approximately PLLA film > PHB film > PHBV fibrous > PHB fibrous. At day 3 of cell culture, the viability of the proliferated cells on the various substrates could be ranked as follows: TCPS > PHBV film > PLLA film > PCL film > PLLA fibrous > PHB film approximately PCL fibrous > CS fibrous > CS film > PHB fibrous > PHBV fibrous. At approximately 8 h after cell seeding, the cells on the flat surfaces of all of the film scaffolds and that of the PCL nanofibrous scaffold appeared in their characteristic spindle shape, while those on the surfaces of the PHB, PHBV, and PLLA macrofibrous scaffolds also appeared in their characteristic spindle shape, but with the cells being able to penetrate to the inner side of the scaffolds.     

High-throughput 3-D cell-based proliferation and cytotoxicity assays for drug screening and bioprocess development

We have designed, built and tested a three-dimensional (3-D) cell culture system on modified microplates for high-throughput, real-time, proliferation and cytotoxicity assays. In this 3-D culture system, cells expressing the enhanced green fluorescent protein (EGFP) were cultured in nonwoven polyethylene terephthalate (PET) fibrous scaffolds. Compared to 2-D cultures in conventional microplates, 3-D cultures gave more than 10-fold higher fluorescence signals with significantly increased signal-to-noise ratio (SNR), thus extending the application of conventional fluorescence microplate readers for online monitoring of culture fluorescence. The 3-D system was successfully used to demonstrate the effects of fetal bovine serum, fibronectin coating of PET fibers, and cytotoxicity of dexamethasone on recombinant murine embryonic stem D3 cells. The dosage effects of 5-fluorouracil and gemcitabine on high-density colon cancer HT-29 cells were also tested. These studies demonstrated that the 3-D culture microplate system with EGFP expressing cells can be used as a high-throughput system in drug discovery and bioprocess development.     

Human mesenchymal stem cells tissue development in 3D PET matrices

Human mesenchymal stem cells (hMSCs) are attractive cell sources for engineered tissue constructs with broad therapeutic potential. Three-dimensional (3D) hMSC tissue development in nonwoven poly(ethylene terephthalate) (PET) fibrous matrices was investigated. HMSCs were seeded onto 3D PET scaffolds and were cultured for over 1 month. Their proliferation rates were affected by seeding density but remained much lower than those of 2D controls. Compared to 2D surfaces, hMSCs grown in 3D scaffolds secreted and embedded themselves in an extensive ECM network composed of collagen I, collagen IV, fibronectin, and laminin. HMSCs were influenced by the orientation of adjacent PET fibers to organize the ECM proteins into highly aligned fibrils. We observed the increased expressions of alpha(2)beta(1) integrin but a slight decrease in the expression of alpha(5)beta(1) integrin in 3D compared to 2D culture and found that alpha(V)beta(3) was expressed only in 2D. Paxillin expression was down-regulated in 3D culture with a concomitant change in its localization patterns. We demonstrated the multi-lineage potentials of the 3D tissue constructs by differentiating the cells grown in the scaffolds into osteoblasts and adipocytes. Taken together, these results showed that hMSCs grown in 3D scaffolds display tissue development patterns distinct from their 2D counterparts and provide important clues for designing 3D scaffolds for developing tissue engineered constructs.     

Nuclei deformation in HaCaT keratinocytes cultivated on aligned fibrous substrates

Substrate topography influences cell shape, direction and rate of migration, nucleus shape, and gene expression levels. This influence is commonly studied using substrates with predefined surface structure and chemical composition. In the current work, we studied the state of HaCaT keratinocyte nuclei and actin cytoskeleton on poly(ε-caprolactone) scaffolds obtained by electrospinning. Two types of fibrous scaffolds were prepared and characterized. In the random scaffolds, the fibers were arranged in a nonsystematic fashion; however, most of the fibers had the same direction in the aligned scaffolds. When cultured on the aligned scaffolds, HaCaT cells exhibited oriented actin filaments and had more elongated nuclei.     

Novel hybrid scaffolds for the cultivation of osteoblast cells

In this study, natural biodegradable polysaccharide, chitosan, and synthetic biodegradable polymer, poly(?-caprolactone) (PCL) were used to prepare 3D, hybrid polymeric tissue scaffolds (PCL/chitosan blend and PCL/chitosan/PCL layer by layer scaffolds) by using the electrospinning technique. The hybrid scaffolds were developed through HA addition to accelerate osteoblast cell growth. Characteristic examinations of the scaffolds were performed by micrometer, SEM, contact angle measurement system, ATR-FTIR, tensile machine and swelling experiments. The thickness of all electrospun scaffolds was determined in the range of 0.010 ± 0.001-0.012 ± 0.002 mm. In order to optimize electrospinning processes, suitable bead-free and uniform scaffolds were selected by using SEM images. Blending of PCL with chitosan resulted in better hydrophilicity for the PCL/chitosan scaffolds. The characteristic peaks of PCL and chitosan in the blend and layer by layer nanofibers were observed. The PCL/chitosan/PCL layer by layer structure had higher elastic modulus and tensile strength values than both individual PCL and chitosan structures. The layer by layer scaffolds exhibited the PBS absorption values of 184.2; 197.2% which were higher than those of PCL scaffolds but lower than those of PCL/chitosan blend scaffolds. SaOs-2 osteosarcoma cell culture studies showed that the highest ALP activities belonged to novel PCL/chitosan/PCL layer by layer scaffolds meaning better cell differentiation on the surfaces.     

Liquid perfluorochemical-supported hybrid cell culture system for proliferation of chondrocytes on fibrous polylactide scaffolds

CP5 bovine chondrocytes were cultured on biodegradable electrospun fibrous polylactide (PLA) scaffolds placed on a flexible interface formed between two immiscible liquid phases: (1) hydrophobic perfluorochemical (PFC) and (2) aqueous culture medium, as a new way of cartilage implant development. Robust and intensive growth of CP5 cells was achieved in our hybrid liquid–solid–liquid culture system consisting of the fibrous PLA scaffolds in contrast to limited growth of the CP5 cells in traditional culture system with PLA scaffold placed on solid surface. The multicellular aggregates of CP5 cells covered the surface of PLA scaffolds and the chondrocytes migrated through and overgrew internal fibers of the scaffolds. Our hybrid culture system simultaneously allows the adhesion of adherent CP5 cells to fibers of PLA scaffolds as well as, due to use of phase of PFC, enhances the mass transfer in the case of supplying/removing of respiratory gases, i.e., O₂ and CO₂. Our flexible (independent of vessel shape) system is simple, ready-to-use and may utilize a variety of polymer-based scaffolds traditionally proposed for implant development.     

Microenvironment Promotes Tumor Cell Reprogramming in Human Breast Cancer Cell Lines

The microenvironment drives mammary gland development and function, and may influence significantly both malignant behavior and cell growth of mammary cancer cells. By restoring context, and forcing cells to properly interpret native signals from the microenvironment, the cancer cell aberrant behavior can be quelled, and organization re-established. In order to restore functional and morphological differentiation, human mammary MCF-7 and MDA-MB-231 cancer cells were allowed to grow in a culture medium filled with a 10% of the albumen (EW, Egg White) from unfertilized chicken egg. That unique microenvironment behaves akin a 3D culture and induces MCF-7 cells to produce acini and branching duct-like structures, distinctive of mammary gland differentiation. EW-treated MDA-MB-231 cells developed buds of acini and duct-like structures. Both MCF-7 and MDA-MB-231 cells produced β-casein, a key milk component. Furthermore, E-cadherin expression was reactivated in MDA-MB-231 cells, as a consequence of the increased cdh1 expression; meanwhile β-catenin – a key cytoskeleton component – was displaced behind the inner cell membrane. Such modification hinders the epithelial-mesenchymal transition in MDA-MB-231 cells. This differentiating pathway is supported by the contemporary down-regulation of canonical pluripotency markers (Klf4, Nanog). Given that egg-conditioned medium behaves as a 3D-medium, it is likely that cancer phenotype reversion could be ascribed to the changed interactions between cells and their microenvironment.     

Apple Derived Cellulose Scaffolds for 3D Mammalian Cell Culture

There are numerous approaches for producing natural and synthetic 3D scaffolds that support the proliferation of mammalian cells. 3D scaffolds better represent the natural cellular microenvironment and have many potential applications in vitro and in vivo. Here, we demonstrate that 3D cellulose scaffolds produced by decellularizing apple hypanthium tissue can be employed for in vitro 3D culture of NIH3T3 fibroblasts, mouse C2C12 muscle myoblasts and human HeLa epithelial cells. We show that these cells can adhere, invade and proliferate in the cellulose scaffolds. In addition, biochemical functionalization or chemical cross-linking can be employed to control the surface biochemistry and/or mechanical properties of the scaffold. The cells retain high viability even after 12 continuous weeks of culture and can achieve cell densities comparable with other natural and synthetic scaffold materials. Apple derived cellulose scaffolds are easily produced, inexpensive and originate from a renewable source. Taken together, these results demonstrate that naturally derived cellulose scaffolds offer a complementary approach to existing techniques for the in vitro culture of mammalian cells in a 3D environment.     

Electrospun Poly(L-Lactide) Fiber with Ginsenoside Rg3 for Inhibiting Scar Hyperplasia of Skin

Hypertrophic scarring (HS) has been considered as a great concern for patients and a challenging problem for clinicians as it can be cosmetically disfiguring and functionally debilitating. In this study, Ginsenoside Rg3/Poly(l-lactide) (G-Rg3/PLLA) electrospun fibrous scaffolds covering on the full-thickness skin excisions location was designed to suppress the hypertrophic scar formation in vivo. SEM and XRD results indicated that the crystal G-Rg3 carried in PLLA electrospun fibers was in amorphous state, which facilitates the solubility of G-Rg3 in the PLLA electrospun fibrous scaffolds, and solubility of G-Rg3 in PBS is increased from 3.2 µg/ml for pure G-Rg3 powders to 19.4 µg/ml for incorporated in PLLA-10% fibers. The released G-Rg3 content in the physiological medium could be further altered from 324 to 3445 µg in a 40-day release period by adjusting the G-Rg3 incorporation amount in PLLA electrospun fibers. In vitro results demonstrated that electrospun G-Rg3/PLLA fibrous scaffold could significantly inhibit fibroblast cell growth and proliferation. In vivo results confirmed that the G-Rg3/PLLA electrospun fibrous scaffold showed significant improvements in terms of dermis layer thickness, fibroblast proliferation, collagen fibers and microvessels, revealing that the incorporation of the G-Rg3 in the fibers prevented the HS formation. The above results demonstrate the potential use of G-Rg3/PLLA electrospun fibrous scaffolds to rapidly minimize fibroblast growth and restore the structural and functional properties of wounded skin for patients with deep trauma, severe burn injury, and surgical incision.     

Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering

For tissue engineering and regeneration, a porous scaffold with interconnected networks is needed to guide cell attachment and growth/ingrowth in three-dimensional (3D) structure. Using a rapid prototyping (RP) technique, we designed and fabricated 3D plotting system and three types of scaffolds: those from polycaprolactone (PCL), those from PCL and hydroxyapatite (HA), and those from PCL/HA and with a shifted pattern structure (PCL/HA/SP scaffold). Shifted pattern structure was fabricated to increase the cell attachment/adhesion. The PCL/HA/SP scaffold had a lower compressive modulus than PCL and PCL/HA scaffold. However, it has a better cell attachment than the scaffolds without a shifted pattern. MTT assay and alkaline phosphatase activity results for the PCL/HA/SP scaffolds were significantly enhanced compared to the results for the PCL and PCL/HA scaffolds. According to their degree of cell proliferation/differentiation, the scaffolds were in the following order: PCL/HA/SP > PCL/HA > PCL. These 3D scaffolds will be applicable for tissue engineering based on unique plotting system.     

Self-reporting Scaffolds for 3-Dimensional Cell Culture

Culturing cells in 3D on appropriate scaffolds is thought to better mimic the in vivo microenvironment and increase cell-cell interactions. The resulting 3D cellular construct can often be more relevant to studying the molecular events and cell-cell interactions than similar experiments studied in 2D. To create effective 3D cultures with high cell viability throughout the scaffold the culture conditions such as oxygen and pH need to be carefully controlled as gradients in analyte concentration can exist throughout the 3D construct. Here we describe the methods of preparing biocompatible pH responsive sol-gel nanosensors and their incorporation into poly(lactic-co-glycolic acid) (PLGA) electrospun scaffolds along with their subsequent preparation for the culture of mammalian cells. The pH responsive scaffolds can be used as tools to determine microenvironmental pH within a 3D cellular construct. Furthermore, we detail the delivery of pH responsive nanosensors to the intracellular environment of mammalian cells whose growth was supported by electrospun PLGA scaffolds. The cytoplasmic location of the pH responsive nanosensors can be utilized to monitor intracellular pH (pHi) during ongoing experimentation.     

Fabrication and evaluation of poly(epsilon-caprolactone)/silk fibroin blend nanofibrous scaffold

In this study we investigated the blend electrospinning of poly(?‐caprolactone) (PCL) and silk fibroin (SF) to improve the biodegradability and biocompatibility of PCL‐based nanofibrous scaffolds. Optimal conditions to fabricate PCL/SF (50/50) blend nanofiber were established for electrospinning using formic acid as a cosolvent and three‐dimensional (3D) PCL/SF blend nanofibrous scaffolds were prepared by a modified electrospinning process using methanol coagulation bath. The physical properties of 2D PCL/SF blend nanofiber mats and 3D highly porous blend nanofibrous scaffolds were measured and compared. To evaluate cytocompatibility of the 3D blend scaffolds as compared to 3D PCL nanofibrous scaffold, normal human dermal fibroblasts were cultured. It is concluded that biodegradability and cytocompatibility could be improved for the 3D highly porous PCL/SF (50/50) blend nanofibrous scaffold prepared by blending PCL with SF in electrospinning. In addition to the blending of PCL and SF, the 3D structure and high porosity of electrospun nanofiber assemblies may also be important factors for enhancing the performance of scaffolds. © 2011 Wiley Periodicals, Inc. Biopolymers 97: 265–275, 2012.     

Promotion of human mesenchymal stem cell differentiation on bioresorbable polycaprolactone/biphasic calcium phosphate composite scaffolds for bone tissue engineering

An artificial construct mimicking the intrinsic properties of the natural extracellular matrix in bones has been considered an ideal platform for bone tissue engineering, as it can present an appropriate microenvironment and regulate cell behaviours. In this report, we introduce biodegradable composite scaffolds consisting of polycaprolactone (PCL) and biphasic calcium phosphate (BCP). The scaffolds were fabricated by a salt-leaching process, and the ability of the scaffolds to facilitate osteogenic differentiation was investigated using human mesenchymal stem cells (hMSCs). The scaffolds had an inter-connected porous structure with quadrilateral pores of approximately 200 ～ 500 μm in width. The mechanical properties of the scaffolds changed as the BCP content was increased in the starting mixture. In the hMSC experiment, although we found that hMSCs adhered to the surface, as well as the inside, of the scaffolds, the incorporated BCP did not increase the proliferation of the hMSCs over 7 days in culture. Interestingly, the alkaline phosphatase (ALP) activity was 4 times higher on the PCL/BCP composite scaffold (0.12 ± 0.03 nmol/min/μg protein) thanon the PCL scaffold (0.03 ± 0.01 nmol/min/μg protein), suggesting that BCP can aid in generating a local environment that promotes bone regeneration. Therefore, a strategy combining polymers and ceramics can be considered a useful platform for bone tissue engineering.     

Exploring cellular adhesion and differentiation in a micro‐/nano‐hybrid polymer scaffold

Polymer scaffolds play an important role in three dimensional (3‐D) cell culture and tissue engineering. To best mimic the archiecture of natural extracellular matrix (ECM), a nano‐fibrous and micro‐porous combined (NFMP) scaffold was fabricated by combining phase separation and particulate leaching techniques. The NFMP scaffold possesses architectural features at two levels, including the micro‐scale pores and nano‐scale fibers. To evaluate the advantages of micro/nano combination, control scaffolds with only micro‐pores or nano‐fibers were fabricated. Cell grown in NFMP and control scaffolds were characterized with respect to morphology, proliferation rate, diffentiation and adhesion. The NFMP scaffold combined the advantages of micro‐ and nano‐scale structures. The NFMP scaffold nano‐fibers promoted neural differentiation and induced “3‐D matrix adhesion”, while the NFMP scaffold micro‐pores facilitated cell infiltration. This study represents a systematic comparison of cellular activities on micro‐only, nano‐only and micro/nano combined scaffolds, and demonstrates the unique advantages of the later. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications

Biomaterial-based scaffolds are important cues in tissue engineering (TE) applications. Recent advances in TE have led to the development of suitable scaffold architecture for various tissue defects. In this narrative review on polycaprolactone (PCL), we have discussed in detail about the synthesis of PCL, various properties and most recent advances of using PCL and PCL blended with either natural or synthetic polymers and ceramic materials for TE applications. Further, various forms of PCL scaffolds such as porous, films and fibrous have been discussed along with the stem cells and their sources employed in various tissue repair strategies. Overall, the present review affords an insight into the properties and applications of PCL in various tissue engineering applications.     

Electrospun Scaffold of Collagen and Polycaprolactone Containing ZnO Quantum Dots for Skin Wound Regeneration

Nanofibers(NFs)have been widely used in tissue engineering such as wound healing.In this work,the antibacterial ZnO quantum dots(ZnO QDs)have been incorporated into the biocompatible poly(ε-caprolactone)/collagen(PCL/Col)fibrous scaffolds for wound healing.The as-fabricated PCL-Col/ZnO fibrous scaffolds exhibited good swelling,antibacterial activity,and biodegradation behaviors,which were beneficial for the applications as a wound dressing.Moreover,the PCL-Col/ZnO fibrous scaffolds showed excellent cytocompatibility for promoting cell proliferation.The resultant PCL-Col/ZnO fibrous scaffolds containing vascular endothelial growth factor(VEGF)also exhibited promoted wound-healing effect through promoting expression of transforming growth factor-β(TGF-β)and the vascular factor(CD31)in tissues in the early stages of wound healing.This new electrospun fibrous scaffolds with wound-healing promotion and antibacterial property should be convenient for treating wound healing.     

Inhibitor of PI3K/Akt Signaling Pathway Small Molecule Promotes Motor Neuron Differentiation of Human Endometrial Stem Cells Cultured on Electrospun Biocomposite Polycaprolactone/Collagen Scaffolds

Small molecules as useful chemical tools can affect cell differentiation and even change cell fate. It is demonstrated that LY294002, a small molecule inhibitor of phosphatidylinositol 3-kinase (PI3K)/Akt signal pathway, can inhibit proliferation and promote neuronal differentiation of mesenchymal stem cells (MSCs). The purpose of this study was to investigate the differentiation effect of Ly294002 small molecule on the human endometrial stem cells (hEnSCs) into motor neuron-like cells on polycaprolactone (PCL)/collagen scaffolds. hEnSCs were cultured in a neurogenic inductive medium containing 1 μM LY294002 on the surface of PCL/collagen electrospun fibrous scaffolds. Cell attachment and viability of cells on scaffolds were characterized by scanning electron microscope (SEM) and 3-(4,5-dimethylthiazoyl-2-yl)2,5-diphenyltetrazolium bromide (MTT) assay. The expression of neuron-specific markers was assayed by real-time PCR and immunocytochemistry analysis after 15 days post induction. Results showed that attachment and differentiation of hEnSCs into motor neuron-like cells on the scaffolds with Ly294002 small molecule were higher than that of the cells on tissue culture plates as control group. In conclusion, PCL/collagen electrospun scaffolds with Ly294002 have potential for being used in neural tissue engineering because of its bioactive and three-dimensional structure which enhances viability and differentiation of hEnSCs into neurons through inhibition of the PI3K/Akt pathway. Thus, manipulation of this pathway by small molecules can enhance neural differentiation.     

Perfusion affects the tissue developmental patterns of human mesenchymal stem cells in 3D scaffolds

Human mesenchymal stem cells (hMSCs) developed in three‐dimensional (3D) scaffolds are significantly affected by culture conditions. We hypothesized that the hydrodynamic forces generated in perfusion bioreactors significantly affected hMSC functionality in 3D scaffolds by shaping the extracellular matrix (ECM) proteins. In this study, hMSCs were grown in 3D poly(ethylene terephthalate) (PET) scaffolds in static and a parallel perfusion system under similar initial conditions for up to 35 days. Results demonstrated that even at very low media velocities (O [10^?4 cm/sec]), perfusion cultures affected the ability of hMSCs to form an organized ECM network as illustrated by the immunostaining of collagen I and laminin fibrous structure. The change in the ECM microenvironment consequently influenced the nuclear shape. The hMSCs grown at the lower surface of static culture displayed a 15.2 times higher nuclear elongation than those at the upper surface, whereas cells grown in the perfusion bioreactor displayed uniform spherical nuclei on both surfaces. The difference in ECM organization and nuclear morphology associated with gene expression and differentiation characteristics of hMSCs. The cells exhibited lower CFU‐F colony forming ability and decreased expressions of stem‐cell genes of Rex‐1 and Oct‐4, implying a less primitive stem‐cell phenotype was maintained in the perfusion culture relative to the static culture conditions. The significantly higher expression level of osteonectin gene in the perfusion culture at day 28 indicated an upregulation of osteogenic ability of hMSCs. The study highlights the critical role of dynamic culture conditions on 3D hMSC construct development and properties. J. Cell. Physiol. 219: 421–429, 2009. © 2009 Wiley‐Liss, Inc.     

Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells

Electrospun nanocomposite scaffolds were fabricated by encapsulating multi-walled carbon nanotubes (MWNT) in poly (lactic acid) (PLA) nanofibers. Scanning electron microscopy (SEM) confirmed the fabrication of nanofibers, and transmission electron microscopy identified the alignment and dispersion of MWNT along the axis of the fibers. Tensile testing showed an increase in the tensile modulus for a MWNT loading of 0.25 wt% compared with electrospun nanofibrous mats without MWNT reinforcement. Conductivity measurements indicated that the confined geometry of the fibrous system requires only minute doping to obtain significant enhancements at 0.32 wt%. Adipose-derived human mesenchymal stem cells (hMSCs) were seeded on electrospun scaffolds containing 1 wt% MWNT and 0 wt% MWNT, to determine the efficacy of the scaffolds for cell growth, and the effect of MWNT on hMSC viability and proliferation over two weeks in culture. Staining for live and dead cells and DNA quantification indicated that the hMSCs were alive and proliferating through day 14. SEM images of hMSCs at 14 days showed morphological differences, with hMSCs on PLA well spread and hMSCs on PLA with 1% MWNT closely packed and longitudinally aligned.