Comprehensive features of natural and in vitro selected GNRA tetraloop-binding receptors

Specific recognitions of GNRA tetraloops by small helical receptors are among the most widespread long-range packing interactions in large ribozymes. However, in contrast to GYRA and GAAA tetraloops, very few GNRA/receptor interactions have yet been identified to involve GGAA tetraloops in nature. A novel in vitro selection scheme based on a rigid self-assembling tectoRNA scaffold designed for isolation of intermolecular interactions with A-minor motifs has yielded new GGAA tetraloop-binding receptors with affinity in the nanomolar range. One of the selected receptors is a novel 12 nt RNA motif, (CCUGUG ... AUCUGG), that recognizes GGAA tetraloop hairpin with a remarkable specificity and affinity. Its physical and chemical characteristics are comparable to those of the well-studied '11nt' GAAA tetraloop receptor motif. A second less specific motif (CCCAGCCC ... GAUAGGG) binds GGRA tetraloops and appears to be related to group IC3 tetraloop receptors. Mutational, thermodynamic and comparative structural analysis suggests that natural and in vitro selected GNRA receptors can essentially be grouped in two major classes of GNRA binders. New insights about the evolution, recognition and structural modularity of GNRA and A-minor RNA-RNA interactions are proposed.     

A conserved motif in group IC3 introns is a new class of GNRA receptor

Terminal tetraloops consisting of GNRA sequences are often found in biologically active large RNAs. The loops appear to contribute towards the organization of higher order RNA structures by forming specific tertiary interactions with their receptors. Group IC3 introns which possess a GAAA loop in the L2 region often have a phylogenetically conserved motif in their P8 domains. In this report, we show that this conserved motif stands as a new class of receptor that distinguishes the sequences of GNRA loops less stringently than previously known receptors. The motif can functionally substitute an 11 nt motif receptor in the Tetrahymena ribozyme. Its structural and functional similarity to one class of synthetic receptors obtained from in vitro selection is observed.     

Frequent use of the same tertiary motif by self-folding RNAs.

We have identified an 11 nucleotide RNA motif, [CCUAAG...UAUGG], that is extraordinarily abundant in group I and group II self-splicing introns at sites known, or suspected from co-variation analysis, to interact with hairpin terminal loops with a GNRA consensus sequence. Base substitution experiments using a ribozyme-substrate system derived from a group I intron reveal that this motif interacts preferentially with GAAA terminal loops and binds them with remarkable affinity, compared with other known combinations of GNRA loops and matched targets. A copy of the [CCUAAG...UAUGG] motif which is present in domain I of many group II introns is shown to interact with the GAAA terminal loop that caps domain V. This is the first interaction to be identified between these two domains, whose mutual recognition is known to be necessary and sufficient for group II ribozymic activity. We conclude that interaction of [CCUAAG...UAUGG] with GAAA loops is one of the most common solutions used by nature to solve the problem of compacting and bringing together RNA structural domains.     

Structural Variation and Uniformity among Tetraloop-Receptor Interactions and Other Loop-Helix Interactions in RNA Crystal Structures

Tetraloop-receptor interactions are prevalent structural units in RNAs, and include the GAAA/11-nt and GNRA-minor groove interactions. In this study, we have compiled a set of 78 nonredundant loop-helix interactions from X-ray crystal structures, and examined them for the extent of their sequence and structural variation. Of the 78 interactions in the set, only four were classical GAAA/11-nt motifs, while over half (48) were GNRA-minor groove interactions. The GNRA-minor groove interactions were not a homogeneous set, but were divided into five subclasses. The most predominant subclass is characterized by two triple base pair interactions in the minor groove, flanked by two ribose zipper contacts. This geometry may be considered the “standard” GNRA-minor groove interaction, while the other four subclasses are alternative ways to form interfaces between a minor groove and tetraloop. The remaining 26 structures in the set of 78 have loops interacting with mostly idiosyncratic receptors. Among the entire set, a number of sequence-structure correlations can be identified, which may be used as initial hypotheses in predicting three-dimensional structures from primary sequences. Conversely, other sequence patterns are not predictive; for example, GAAA loop sequences and GG/CC receptors bind to each other with three distinct geometries. Finally, we observe an example of structural evolution in group II introns, in which loop-receptor motifs are substituted for each other while maintaining the larger three-dimensional geometry. Overall, the study gives a more complete view of RNA loop-helix interactions that exist in nature.     

Rules for RNA recognition of GNRA tetraloops deduced by in vitro selection: comparison with in vivo evolution.

Terminal loops with a GNRA consensus sequence are a prominent feature of large self-assembling RNA molecules. In order to investigate tertiary interactions involving GNRA loops, we have devised an in vitro selection system derived from a group I ribozyme. Two selections, destined to isolate RNA sequences that would recognize two of the most widespread loops (GUGA and GAAA), yielded variants of previously identified receptors for those loops, and also some yet unrecognized, high-affinity binders with novel specificities towards members of the GNRA family. By taking advantage of available crystal structures, we have attempted to rationalize these results in terms of RNA-RNA contacts and to expose some of the structural principles that govern GNRA loop-mediated tertiary interactions; the role of loop nucleotide 2 in ensuring specific recognition by receptors is emphasized. More generally, comparison of the products of in vitro and natural selection is shown to provide insights into the mechanisms underlying the in vivo evolution of self-assembling RNA molecules.     

Common and distinctive features of GNRA tetraloops based on a GUAA tetraloop structure at 1.4 A resolution

GNRA tetraloops (N is A, C, G, or U; R is A or G) are basic building blocks of RNA structure that often interact with proteins or other RNA structural elements. Understanding sequence-dependent structural variation among different GNRA tetraloops is an important step toward elucidating the molecular basis of specific GNRA tetraloop recognition by proteins and RNAs. Details of the geometry and hydration of this motif have been based on high-resolution crystallographic structures of the GRRA subset of tetraloops; less is known about the GYRA subset (Y is C or U). We report here the structure of a GUAA tetraloop determined to 1.4 A resolution to better define these details and any distinctive features of GYRA tetraloops. The tetraloop is part of a 27-nt structure that mimics the universal sarcin/ricin loop from Escherichia coli 23S ribosomal RNA in which a GUAA tetraloop replaces the conserved GAGA tetraloop. The adenosines of the GUAA tetraloop form an intermolecular contact that is a commonplace RNA tertiary interaction called an A-minor motif. This is the first structure to reveal in great detail the geometry and hydration of a GUAA tetraloop and an A-minor motif. Comparison of tetraloop structures shows a common backbone geometry for each of the eight possible tetraloop sequences and suggests a common hydration. After backbone atom superposition, equivalent bases from different tetraloops unexpectedly depart from coplanarity by as much as 48 degrees. This variation displaces the functional groups of tetraloops implicated in protein and RNA binding, providing a recognition feature.     

In vitro selected GUAA tetraloop-binding receptors with structural plasticity and evolvability towards natural RNA structural modules

GNRA tetraloop-binding receptor interactions are key components in the macromolecular assembly of a variety of functional RNAs. In nature, there is an apparent bias for GAAA/11nt receptor and GYRA/helix interactions, with the former interaction being thermodynamically more stable than the latter. While past in vitro selections allowed isolation of novel GGAA and GUGA receptors, we report herein an in vitro selection that revealed several novel classes of specific GUAA receptors with binding affinities comparable to those from natural GAAA/11nt interactions. These GUAA receptors have structural homology with double-locked bulge RNA modules naturally occurring in ribosomal RNAs. They display mutational robustness that enables exploration of the sequence/phenotypic space associated to GNRA/receptor interactions through epistasis. Their thermodynamic self-assembly fitness landscape is characterized by a rugged neutral network with possible evolutionary trajectories toward natural GNRA/receptor interactions. High throughput sequencing analysis revealed synergetic mutations located away from the tertiary interactions that positively contribute to assembly fitness. Our study suggests that the repertoire of GNRA/receptor interactions is much larger than initially thought from the analysis of natural stable RNA molecules and also provides clues for their evolution towards natural GNRA/receptors.     

An in vitro-selected RNA receptor for the GAAC loop: modular receptor for non–GNRA-type tetraloop

Although artificial RNA motifs that can functionally replace the GNRA/receptor interaction, a class of RNA–RNA interacting motifs, were isolated from RNA libraries and used to generate designer RNA structures, receptors for non-GNRA tetraloops have not been found in nature or selected from RNA libraries. In this study, we report successful isolation of a receptor motif interacting with GAAC, a non-GNRA tetraloop, from randomized sequences embedded in a catalytic RNA. Biochemical characterization of the GAAC/receptor interacting motif within three structural contexts showed its binding affinity, selectivity and structural autonomy. The motif has binding affinity comparable with that of a GNRA/receptor, selectivity orthogonal to GNRA/receptors and structural autonomy even in a large RNA context. These features would be advantageous for usage of the motif as a building block for designer RNAs. The isolated motif can also be used as a query sequence to search for unidentified naturally occurring GANC receptor motifs.     

Quantitative analysis of the isolated GAAA tetraloop/receptor interaction in solution: a site-directed spin labeling study

The GNRA (N: any nucleotide; R: purine) tetraloop/receptor interaction is believed to be one of the most frequently occurring tertiary interaction motifs in RNAs, but an isolated tetraloop/receptor complex has not been identified in solution. In the present work, site-directed spin labeling is applied to detect tetraloop/receptor complex formation and estimate the free energy of interaction. For this purpose, the GAAA tetraloop/receptor interaction was chosen as a model system. A method was developed to place nitroxide labels at specific backbone locations in an RNA hairpin containing the GAAA tetraloop. Formation of the tetraloop/receptor complex was monitored through changes in the rotational correlation time of the tetraloop and the attached nitroxide. Results show that a hairpin containing the GAAA tetraloop forms a complex with an RNA containing the 11-nucleotide GAAA tetraloop receptor motif with an apparent Kd that is strongly dependent on Mg2+. At 125 mM MgCl2, Kd = 0.40 +/- 0.05 mM. The corresponding standard free energy of complex formation is -4.6 kcal/mol, representing the energetics of the tetraloop/receptor interaction in the absence of other tertiary constraints. The experimental strategy presented here should have broad utility in quantifying weak interactions that would otherwise be undetectable, for both nucleic acids and nucleic acid-protein complexes.     

Selection of a novel class of RNA-RNA interaction motifs based on the ligase ribozyme with defined modular architecture

To develop molecular tools for the detection and control of RNA molecules whose functions rely on their 3D structures, we have devised a selection system to isolate novel RNA motifs that interact with a target RNA structure within a given structural context. In this system, a GAAA tetraloop and its specific receptor motif (11-ntR) from an artificial RNA ligase ribozyme with modular architecture (the DSL ribozyme) were replaced with a target structure and random sequence, respectively. Motifs recognizing the target structure can be identified by in vitro selection based on ribozyme activity. A model selection targeting GAAA-loop successfully identified motifs previously known as GAAA-loop receptors. In addition, a new selection targeting a C-loop motif also generated novel motifs that interact with this structure. Biochemical analysis of one of the C-loop receptor motifs revealed that it could also function as an independent structural unit.     

Activity and thermostability of the small self-splicing group I intron in the pre-tRNA(lle) of the purple bacterium Azoarcus.

The 205-nt group I intron located in the pre-tRNA(lle) from the bacterium Azoarcus sp.BH72 is the smallest self-splicing group I intron identified to date. Comparative sequence analysis has placed this intron and the Anabaena pre-tRNA(Leu) intron into the same subgroup, IC3; we now compare their activity and stability. Unlike the Anabaena intron, the Azoarcus intron has two transitions in the kinetics of the first step of splicing. The faster transition occurs with a larger k(cat)/K(m) than that of the Anabaena or other group I introns, due to a rapid K(cat) (5 min(-1) at 32 degrees C) and a low K(m) for guanosine (17 microM). The excised intron circularizes by releasing a trinucleotide from the 5' end of the intron, another property unlike the Anabaena intron. Although it is smaller in size, the Azoarcus intron retains activity at higher temperatures, higher concentrations of urea, and higher pH than the Anabaena intron. Melting curves show that tertiary structure is disrupted at a lower temperature in the Anabaena intron. Some structural features that may explain the unusual stability of the Azoarcus intron include a G-C rich secondary structure and the presence of two 11-nt motifs, which are known to interact strongly with GAAA loops in group I and group II introns. The disruption of one of these interactions by substituting the Anabaena structural element in fact lowered the thermal stability of the Azoarcus intron. Thus, even superficially similar group I introns from the same structural subgroup can differ significantly in activity and stability.     

Clustering RNA structural motifs in ribosomal RNAs using secondary structural alignment

RNA structural motifs are the building blocks of the complex RNA architecture. Identification of non-coding RNA structural motifs is a critical step towards understanding of their structures and functionalities. In this article, we present a clustering approach for de novo RNA structural motif identification. We applied our approach on a data set containing 5S, 16S and 23S rRNAs and rediscovered many known motifs including GNRA tetraloop, kink-turn, C-loop, sarcin-ricin, reverse kink-turn, hook-turn, E-loop and tandem-sheared motifs, with higher accuracy than the state-of-the-art clustering method. We also identified a number of potential novel instances of GNRA tetraloop, kink-turn, sarcin-ricin and tandem-sheared motifs. More importantly, several novel structural motif families have been revealed by our clustering analysis. We identified a highly asymmetric bulge loop motif that resembles the rope sling. We also found an internal loop motif that can significantly increase the twist of the helix. Finally, we discovered a subfamily of hexaloop motif, which has significantly different geometry comparing to the currently known hexaloop motif. Our discoveries presented in this article have largely increased current knowledge of RNA structural motifs.     

Intermolecular interaction between a branching ribozyme and associated homing endonuclease mRNA

RNA tertiary interactions involving docking of GNRA (N; any base; R; purine) hairpin loops into helical stem structures on other regions of the same RNA are one of the most common RNA tertiary interactions. In this study, we investigated a tertiary association between a GAAA hairpin tetraloop in a small branching ribozyme (DiGIR1) and a receptor motif (HEG P1 motif) present in a hairpin structure on a separate mRNA molecule. DiGIR1 generates a 2', 5' lariat cap at the 5' end of its downstream homing endonuclease mRNA by catalysing a self-cleavage branching reaction at an internal processing site. Upon release, the 5' end of the mRNA forms a distinct hairpin structure termed HEG P1. Our biochemical data, in concert with molecular 3D modelling, provide experimental support for an intermolecular tetraloop receptor interaction between the L9 GAAA in DiGIR1 and a GNRA tetraloop receptor-like motif (UCUAAG-CAAGA) found within the HEG P1. The biological role of this interaction appears to be linked to the homing endonuclease expression by promoting post-cleavage release of the lariat capped mRNA. These findings add to our understanding of how protein-coding genes embedded in nuclear ribosomal DNA are expressed in eukaryotes and controlled by ribozymes.     

The common and the distinctive features of the bulged-G motif based on a 1.04 A resolution RNA structure

Bulged-G motifs are ubiquitous internal RNA loops that provide specific recognition sites for proteins and RNAs. To establish the common and distinctive features of the motif we determined the structures of three variants and compared them with related structures. The variants are 27-nt mimics of the sarcin/ricin loop (SRL) from Escherichia coli 23S ribosomal RNA that is an essential part of the binding site for elongation factors (EFs). The wild-type SRL has now been determined at 1.04 Å resolution, supplementing data obtained before at 1.11 Å and allowing the first calculation of coordinate error for an RNA motif. The other two structures, having a viable (C2658U^•G2663A) or a lethal mutation (C2658G^• G2663C), were determined at 1.75 and 2.25 Å resolution, respectively. Comparisons reveal that bulged-G motifs have a common hydration and geometry, with flexible junctions at flanking structural elements. Six conserved nucleotides preserve the fold of the motif; the remaining seven to nine vary in sequence and alter contacts in both grooves. Differences between accessible functional groups of the lethal mutation and those of the viable mutation and wild-type SRL may account for the impaired elongation factor binding to ribosomes with the C2658G^•G2663C mutation and may underlie the lethal phenotype.     

Evidence that folding of an RNA tetraloop hairpin is less cooperative than its DNA counterpart

Hairpin secondary structural elements play important roles in the folding and function of RNA and DNA molecules. Previous work from our lab on small DNA hairpin loop motifs, d(cGNAg) and d(cGNABg) (where B is C, G, or T), showed that folding is highly cooperative and obeys indirect coupling, consistent with a concerted transition. Herein, we investigate folding of the related, exceptionally stable RNA hairpin motif, r(cGNRAg) (where R is A or G). Previous NMR characterization identified a complex network of seven hydrogen bonds in this loop. We inserted three carbon (C3) spacers throughout the loop and found coupling between G1 of the loop and the CG closing base pair, similar to that found in DNA. These data support a GNRA motif being expandable at any position but before the G. Thermodynamic measurements of nucleotide-analogue-substituted oligonucleotides revealed pairwise-coupling free energies ranging from weak to strong. When coupling free energies were remeasured in the background of changes at a third site, they remained essentially unchanged even though all of the sites were coupled to each other. This type of coupling, referred to as "direct", is peculiar to the RNA loop. The data suggest that, for small stable loops, folding of RNA obeys a model with nearest-neighbor interactions, while folding of DNA follows a more concerted process in which the stabilizing interactions are linked through a conformational change. The lesser cooperativity in RNA loops may provide a more robust loop that can withstand mutations without a severe loss in stability. These differences may enhance the ability of RNA to evolve.     

Biochemical and mutagenic analysis of I-CreII reveals distinct but important roles for both the H-N-H and GIY-YIG motifs

Homing endonucleases typically contain one of four conserved catalytic motifs, and other elements that confer tight DNA binding. I-CreII, which catalyzes homing of the Cr.psbA4 intron, is unusual in containing two potential catalytic motifs, H-N-H and GIY-YIG. Previously, we showed that cleavage by I-CreII leaves ends (2-nt 3′ overhangs) that are characteristic of GIY-YIG endonucleases, yet it has a relaxed metal requirement like H-N-H enzymes. Here we show that I-CreII can bind DNA without an added metal ion, and that it binds as a monomer, akin to GIY-YIG enzymes. Moreover, cleavage of supercoiled DNA, and estimates of strand-specific cleavage rates, suggest that I-CreII uses a sequential cleavage mechanism. Alanine substitution of a number of residues in the GIY-YIG motif, however, did not block cleavage activity, although DNA binding was substantially reduced in several variants. Substitution of conserved histidines in the H-N-H motif resulted in variants that did not promote DNA cleavage, but retained high-affinity DNA binding—thus identifying it as the catalytic motif. Unlike the non-specific H-N-H colicins, however; substitution of the conserved asparagine substantially reduced DNA binding (though not the ability to promote cleavage). These results indicate that, in I-CreII, two catalytic motifs have evolved to play important roles in specific DNA binding. The data also indicate that only the H-N-H motif has retained catalytic ability.     

Predicting U-turns in ribosomal RNA with comparative sequence analysis

The U-turn is a well-known RNA motif characterized by a sharp reversal of the RNA backbone following a single-stranded uridine base. In experimentally determined U-turn motifs, the nucleotides 3' to the turn are frequently involved in tertiary interactions, rendering this motif particularly attractive in RNA modeling and functional studies. The U-turn signature is composed of an UNR sequence pattern flanked by a Y:Y, Y:A (Y=pyrimidine) or G:A base juxtaposition. We have identified 33 potential UNR-type U-turns and 25 related GNRA-type U-turns in a large set of aligned 16 S and 23 S rRNA sequences. U-turn candidates occur in hairpin loops (34 times) as well as in internal and multi-stem loops (24 times). These are classified into ten families based on loop type, sequence pattern (UNR or GNRA) and the nature of the closing base juxtaposition. In 13 cases, the bases on the 3' side of the turn, or on the immediate 5' side, are involved in tertiary covariations, making these sites strong candidates for tertiary interactions.