Hemolysis, toxicity, and randomly amplified polymorphic DNA analysis of Stachybotrys chartarum strains.

Stachybotrys chartarum is an indoor air, toxigenic fungus that has been associated with a number of human and veterinary health problems. Most notable among these has been a cluster of idiopathic pulmonary hemorrhage cases that were observed in the Cleveland, Ohio, area. In this study, 16 strains of S. chartarum isolated from case (n = 8) or control (n = 8) homes in Cleveland and 12 non-Cleveland strains from diverse geographic locations were analyzed for hemolytic activity, conidial toxicity, and randomly amplified polymorphic DNA banding patterns. In tests for hemolytic activity, strains were grown at 23 degrees C on wet wallboard pieces for an 8-week test period. Conidia from these wallboard pieces were subcultured on sheep's blood agar once a week over this period and examined for growth and clearing of the medium at 37 or 23 degrees C. Five of the Cleveland strains (all from case homes) showed hemolytic activity at 37 degrees C throughout the 8-week test compared to 3 of the non-Cleveland strains. Five of the Cleveland strains, compared to two of the non-Cleveland strains, produced highly toxic conidia (>90 microgram of T2 toxin equivalents per g [wet weight] of conidia) after 10 and 30 days of growth on wet wallboard. Only 3 of the 28 strains examined both were consistently hemolytic and produced highly toxic conidia. Each of these strains was isolated from a house in Cleveland where an infant had idiopathic pulmonary hemorrhage.     

Quantification of Siderophore and Hemolysin from Stachybotrys chartarum Strains, Including a Strain Isolated from the Lung of a Child with Pulmonary Hemorrhage and Hemosiderosis

A strain of Stachybotrys chartarum was recently isolated from the lung of a pulmonary hemorrhage and hemosiderosis (PH) patient in Texas (designated the Houston strain). This is the first time that S. chartarum has been isolated from the lung of a PH patient. In this study, the Houston strain and 10 strains of S. chartarum isolated from case (n = 5) or control (n = 5) homes in Cleveland were analyzed for hemolytic activity, siderophore production, and relatedness as measured by random amplified polymorphic DNA analysis.     

Study of Toxin Production by Isolates of Stachybotrys chartarum and Memnoniella echinata Isolated during a Study of Pulmonary Hemosiderosis in Infants

A cluster of cases of pulmonary hemosiderosis among infants was reported in Cleveland, Ohio, during 1993 and 1994. These unusual cases appeared only in infants ranging in age from 1 to 8 months and were characterized by pulmonary hemorrhage, which caused the babies to cough up blood. A case-control study identified major home water damage (from plumbing leaks, roof leaks, or flooding) as a risk factor for development of pulmonary hemorrhage in these infants. Because of an interest in the possibility that trichothecene mycotoxins might be involved in this illness, a number of isolates of Stachybotrys chartarum were grown in the laboratory on rice, and extracts were prepared and analyzed both for cytotoxicity and for specific toxins. Two isolates of Memnoniella echinata, a fungus closely related to S. chartarum, were also included in these studies. S. chartarum isolates collected from the homes were shown to produce a number of highly toxic compounds, and the profiles of toxic compounds from M. echinata were similar; the most notable difference was the fact that the principal metabolites produced by M. echinata were griseofulvins.     

Sanitation of Wallboard Colonized with Stachybotrys chartarum

Sections (8 cm²) of unused, nonsterile gypsum wallboard (dry wall) were inoculated with varying densities (10⁴ to ∼10⁸/ml) of conidia from 14- to 21-day cultures of Stachybotrys chartarum grown on cellulose agar. The sections were permitted to air dry and were placed into vessels with 86% or 92% RH and incubated at 22–25°C for up to 12 weeks. The moisture content of the dryboard increased from near 10% to over 35%. Selected sections with confluent surface growth, mainly of S. chartarum, were obtained within 3 weeks. Sections were cleaned with a quaternary or quaternary and chlorine dioxide or a concentrated oxygen-saline solution and treated, in some cases, with a preservative system and returned to humidity vessels. Reemergence of S. chartarum from inoculated and treated surfaces occurred within 5 weeks only with sections treated with the quaternary alone. Other fungi, mostly species of Aspergillus, Chaetomium and Penicillium, slowly colonized (between 9–12 weeks) at least some areas of most treated surfaces and most uninoculated control surfaces. Stachybotrys chartarum was also found on several sections of uninoculated controls. Sections treated with a quaternary/acrylic and placed in a dynamic challenging chamber remained visually free of colonized fungi for over 90 days. These studies indicate that control samples of uninstalled wallboard, available from local distributors, can contain a baseline bioburden, including S. chartarum, that will colonize surfaces under high humidity conditions. Sanitation and preservation treatment of the wallboard can markedly delay regrowth of these fungi, particularly of S. chartarum. Received: 8 January 1999 / Accepted: 22 February 1999     

Stereo- and Regioselective Hydroxylation of α-Ionone by Streptomyces Strains

A total of 215 Streptomyces strains were screened for their capacity to regio- and stereoselectively hydroxylate β- and/or α-ionone to the respective 3-hydroxy derivatives. With β-ionone as the substrate, 15 strains showed little conversion to 4-hydroxy- and none showed conversion to the 3-hydroxy product as desired. Among these 15 Streptomyces strains, S. fradiae Tü 27, S. arenae Tü 495, S. griseus ATCC 13273, S. violaceoniger Tü 38, and S. antibioticus Tü 4 and Tü 46 converted α-ionone to 3-hydroxy-α-ionone with significantly higher hydroxylation activity compared to that of β-ionone. Hydroxylation of racemic α-ionone [(6R)-(−)/(6S)-(+)] resulted in the exclusive formation of only the two enantiomers (3R,6R)- and (3S,6S)-hydroxy-α-ionone. Thus, the enzymatic hydroxylation of α-ionone by the Streptomyces strains tested proceeds with both high regio- and stereoselectivity.     

Evaluation of a Wipe Surface Sample Method for Collection of Bacillus Spores from Nonporous Surfaces

Polyester-rayon blend wipes were evaluated for efficiency of extraction and recovery of powdered Bacillus atrophaeus spores from stainless steel and painted wallboard surfaces. Method limits of detection were also estimated for both surfaces. The observed mean efficiency of polyester-rayon blend wipe recovery from stainless steel was 0.35 with a standard deviation of ±0.12, and for painted wallboard it was 0.29 with a standard deviation of ±0.15. Evaluation of a sonication extraction method for the polyester-rayon blend wipes produced a mean extraction efficiency of 0.93 with a standard deviation of ±0.09. Wipe recovery quantitative limits of detection were estimated at 90 CFU per unit of stainless steel sample area and 105 CFU per unit of painted wallboard sample area. The method recovery efficiency and limits of detection established in this work provide useful guidance for the planning of incident response environmental sampling following the release of a biological agent such as Bacillus anthracis.     

Quantification of siderophore and hemolysin from Stachybotrys chartarum strains, including a strain isolated from the lung of a child with pulmonary hemorrhage and hemosiderosis

A strain of Stachybotrys chartarum was recently isolated from the lung of a pulmonary hemorrhage and hemosiderosis (PH) patient in Texas (designated the Houston strain). This is the first time that S. chartarum has been isolated from the lung of a PH patient. In this study, the Houston strain and 10 strains of S. chartarum isolated from case (n = 5) or control (n = 5) homes in Cleveland were analyzed for hemolytic activity, siderophore production, and relatedness as measured by random amplified polymorphic DNA analysis.     

Quantitative Analysis of Cereulide, the Emetic Toxin of Bacillus cereus, Produced under Various Conditions

This paper describes a quantitative and sensitive chemical assay for cereulide, the heat-stable emetic toxin produced by Bacillus cereus. The methods previously available for measuring cereulide are bioassays that give a toxicity titer, but not an accurate concentration. The dose of cereulide causing illness in humans is therefore not known, and thus safety limits for cereulide cannot be indicated. We developed a quantitative and sensitive chemical assay for cereulide based on high-performance liquid chromatography (HPLC) connected to ion trap mass spectrometry. This chemical assay and a bioassay based on boar sperm motility inhibition were calibrated with purified cereulide and with valinomycin, a structurally similar cyclic depsipeptide. The boar spermatozoan motility assay and chemical assay gave uniform results over a wide range of cereulide concentrations, ranging from 0.02 to 230 μg ml⁻¹. The detection limit for cereulide and valinomycin by HPLC-mass spectrometry was 10 pg per injection. The combined chemical and biological assays were used to define conditions and concentrations of cereulide formation by B. cereus strains F4810/72, NC7401, and F5881. Cereulide production commenced at the end of logarithmic growth, but was independent of sporulation. Production of cereulide was enhanced by incubation with shaking compared to static conditions. The three emetic B. cereus strains accumulated 80 to 166 μg of cereulide g⁻¹ (wet weight) when grown on solid medium. Strain NC7401 accumulated up to 25 μg of cereulide ml⁻¹ in liquid medium at room temperature (21 ± 1°C) in 1 to 3 days, during the stationary growth phase when cell density was 2 × 10⁸ to 6 × 10⁸ CFU ml⁻¹. Cereulide production at temperatures at and below 8°C or at 40°C was minimal.     

Asexual reproduction and vegetative growth of Bionectria ochroleuca in response to temperature and photoperiod

Growth and reproduction are two essential life‐history traits for fungi. Understanding life‐history strategies provides insight into the environmental adaption of species. Here, we investigated the colonial morphology, vegetative growth, and asexual reproduction of the ascomycete fungus Bionectria ochroleuca in response to a variety of environmental conditions. We demonstrated that the increased temperature from 15 to 25°C induced mycelial growth and conidiation in B. ochroleuca. We also found that the optimal temperatures for mycelial growth and conidial formation in this fungus species were 25 and 30°C, respectively. However, as the temperature increased from 25 to 30°C, mycelial growth was suppressed, but the total number of conidia was significantly increased. The shift in light–dark cycles dramatically changed the morphological features of the colonies and affected both vegetative growth and asexual reproduction. Under incubation environments of alternating light and dark (16:8 and 8:16 light:dark cycles), conidiophores and conidia in the colonies formed dense‐sparse rings and displayed synchronous wave structures. When the light duration was prolonged in the sequence of 0, 8, 16, and 24 hr per day, mycelial growth was suppressed, but conidiation was promoted. Together, our results indicate that temperature and light period may trigger a trade‐off between vegetative growth and asexual reproduction in B. ochroleuca.     

Modeling Reduction of Uranium U(VI) under Variable Sulfate Concentrations by Sulfate-Reducing Bacteria

The kinetics for the reduction of sulfate alone and for concurrent uranium [U(VI)] and sulfate reduction, by mixed and pure cultures of sulfate-reducing bacteria (SRB) at 21 ± 3°C were studied. The mixed culture contained the SRB Desulfovibrio vulgaris along with a Clostridium sp. determined via 16S ribosomal DNA analysis. The pure culture was Desulfovibrio desulfuricans (ATCC 7757). A zero-order model best fit the data for the reduction of sulfate from 0.1 to 10 mM. A lag time occurred below cell concentrations of 0.1 mg (dry weight) of cells/ml. For the mixed culture, average values for the maximum specific reaction rate, V_max, ranged from 2.4 ± 0.2 μmol of sulfate/mg (dry weight) of SRB · h⁻¹) at 0.25 mM sulfate to 5.0 ± 1.1 μmol of sulfate/mg (dry weight) of SRB · h⁻¹ at 10 mM sulfate (average cell concentration, 0.52 mg [dry weight]/ml). For the pure culture, V_max was 1.6 ± 0.2 μmol of sulfate/mg (dry weight) of SRB · h⁻¹ at 1 mM sulfate (0.29 mg [dry weight] of cells/ml). When both electron acceptors were present, sulfate reduction remained zero order for both cultures, while uranium reduction was first order, with rate constants of 0.071 ± 0.003 mg (dry weight) of cells/ml · min⁻¹ for the mixed culture and 0.137 ± 0.016 mg (dry weight) of cells/ml · min⁻¹ (U₀ = 1 mM) for the D. desulfuricans culture. Both cultures exhibited a faster rate of uranium reduction in the presence of sulfate and no lag time until the onset of U reduction in contrast to U alone. This kinetics information can be used to design an SRB-dominated biotreatment scheme for the removal of U(VI) from an aqueous source.     

Mutational analyses of dinucleotide and tetranucleotide microsatellites in Escherichia coli: influence of sequence on expansion mutagenesis

Mutagenesis at [GT/CA]₁₀, [TC/AG]₁₁ and [TTCC/AAGG]₉ microsatellite sequences inserted in the herpes simplex virus thymidine kinase (HSV-tk) gene was analyzed in isogenic mutL⁺ and mutL^– Escherichia coli. In both strains, significantly more expansion than deletion mutations were observed at the [TTCC/AAGG]₉ motif relative to either dinucleo­tide motif. As the HSV-tk coding sequence contains an endogenous [G/C]₇ mononucleotide repeat and ~1000 bp of unique sequence, we were able to compare mutagenesis among various sequence motifs. We observed that the relative risk of mutation in E.coli is: [TTCC/AAGG]₉ > [GT/CA]₁₀ ~ [TC/AG]₁₁ > unique ~ [G/C]₇. The mutation frequency varied 1400-fold in mutL⁺ cells between the tetranucleotide motif and the mononucleotide motif, but only 50-fold in mutL^– cells. The [G/C]₇ sequence was destabilized the greatest and the tetranucleotide motif the least by loss of mismatch repair. These results demonstrate that the quantitative risk of mutation at various microsatellites greatly depends on the DNA sequence composition. We suggest alternative models for the production of expansion mutations during lagging strand replication of the [TTCC/AAGG]₉ microsatellite.     

Temperature and Sporulation of Aquatic Hyphomycetes

Temperature appears to be an important factor affecting the occurrence and distribution of aquatic hyphomycetes, the dominant leaf litter-decomposing fungi in streams. We compared conidium production by eight species of aquatic hyphomycetes grown on yellow poplar leaves in stream-simulating microcosms at three temperatures (15, 20, and 25°C). The greatest conidium production occurred at 15°C for one species, 20°C for two species, and 25°C for two species. Two species produced similar numbers of conidia at 20 and 25°C, and one species produced similar numbers of conidia at all three temperatures. Linear growth rates were determined on malt extract agar. Six species had the same pattern of temperature responses for growth on malt extract agar as for sporulation on leaves, as shown by the positive correlations between the two parameters at the three temperatures. The species examined also exhibited differences in number of conidia produced from a similar amount of leaf material at a given temperature. These differences appeared to be due primarily to differences in individual conidium mass (determined by weighing conidia produced from cultures), as shown by the relationship of the type Y = k/X (r² = 0.96), where Y is the number of conidia produced, X is the individual conidium mass in milligrams, and k is a constant empirically determined to be 2.11. This finding supports the hypothesis that aquatic hyphomycetes allocate similar amounts of their resources to reproduction but vary with respect how these resources are partitioned into reproductive units (conidia).     

Hydration effects of Ni(2+) binding to synthetic polynucleotides with regularly alternating purine-pyrimidine sequences

High precision ultrasonic and densimetric techniques have been used to study the interaction of Ni²⁺ ions with right-handed poly[d(G-C)]·poly[d(G-C)], poly-[d(A-C)]·poly[d(G-T)] and poly[d(A-T)]·poly[d(A-T)] in 5 mM CsCl, 0.2 mM HEPES, pH 7.5 at 20°C. From these measurements the changes in the apparent molar volume and the apparent molar adiabatic compressibility due to the interaction have been obtained. The volume effects of the binding, calculated per mole of Ni²⁺ ions, range from 11.7 to 23.9 cm³ mol^–1 and the compressibility effects range from 19.3 × 10^–4 to 43.1 × 10^–4 cm³ mol^–1 bar^–1. These data are interpreted in terms of dehydration of the polynucleotides and Ni²⁺ ions, i.e. the release of water molecules from the hydration shells of the molecules. An increase in G+C content gives an increase in volume and compressibility effects, indicating a rise in the extent of dehydration. The dehydration effects of Ni²⁺ binding to poly[d(G-C)]·poly[d(G-C)] are approximately twice those of poly[d(A-T)]·poly[d(A-T)]. The volume and compressibility effects of Ni²⁺–EDTA complex formation have also been measured and used as a model system for quantitative estimation. These values revealed that Ni²⁺ ions can coordinate two atomic groups of poly[d(G-C)]·poly[d(G-C)], while in the case of the Ni²⁺–poly[d(A-T)]·poly[d(A-T)] complex volume and compressibility effects correspond to one direct or two indirect (through water) contacts.     

Kinetics of Perchlorate- and Chlorate-Respiring Bacteria

Ten chlorate-respiring bacteria were isolated from wastewater and a perchlorate-degrading bioreactor. Eight of the isolates were able to degrade perchlorate, and all isolates used oxygen and chlorate as terminal electron acceptors. The growth kinetics of two perchlorate-degrading isolates, designated “Dechlorosoma” sp. strains KJ and PDX, were examined with acetate as the electron donor in batch tests. The maximum observed aerobic growth rates of KJ and PDX (0.27 and 0.28 h⁻¹, respectively) were only slightly higher than the anoxic growth rates obtained by these isolates during growth with chlorate (0.26 and 0.21 h⁻¹, respectively). The maximum observed growth rates of the two non-perchlorate-utilizing isolates (PDA and PDB) were much higher under aerobic conditions (0.64 and 0.41 h⁻¹, respectively) than under anoxic (chlorate-reducing) conditions (0.18 and 0.21 h⁻¹, respectively). The maximum growth rates of PDX on perchlorate and chlorate were identical (0.21 h⁻¹) and exceeded that of strain KJ on perchlorate (0.14 h⁻¹). Growth of one isolate (PDX) was more rapid on acetate than on lactate. There were substantial differences in the half-saturation constants measured for anoxic growth of isolates on acetate with excess perchlorate (470 mg/liter for KJ and 45 mg/liter for PDX). Biomass yields (grams of cells per gram of acetate) for strain KJ were not statistically different in the presence of the electron acceptors oxygen (0.46 ± 0.07 [n = 7]), chlorate (0.44 ± 0.05 [n = 7]), and perchlorate (0.50 ± 0.08 [n = 7]). These studies provide evidence that facultative microorganisms with the capability for perchlorate and chlorate respiration exist, that not all chlorate-respiring microorganisms are capable of anoxic growth on perchlorate, and that isolates have dissimilar growth kinetics using different electron donors and acceptors.     

Modulation of plasma protein binding and in vivo liver cell uptake of phosphorothioate oligodeoxynucleotides by cholesterol conjugation

Several studies have shown improved efficacy of cholesteryl-conjugated phosphorothioate antisense oligodeoxynucleotides. To gain insight into the mechanisms of the improved efficacy in vivo, we investigated the disposition of ISIS-9388, the 3′-cholesterol analog of the ICAM-1-specific phosphoro­thioate oligodeoxynucleotide ISIS-3082, in rats. Intravenously injected [³H]ISIS-9388 was cleared from the circulation with a half-life of 49.9 ± 2.2 min (ISIS-3082, 23.3 ± 3.8 min). At 3 h after injection, the liver contained 63.7 ± 3.3% of the dose. Compared to ISIS-3082, the hepatic uptake of ISIS-9388 is ~2-fold higher. Endothelial, Kupffer and parenchymal cells accounted for 45.7 ± 5.7, 33.0 ± 5.9 and 21.3 ± 2.6% of the liver uptake of [³H]ISIS-9388, respectively, and intracellular concentrations of ~2, 75 and 50 µM, respectively, could be reached in these cells (1 mg/kg dose). Preinjection with polyinosinic acid or poly­adenylic acid reduced the hepatic uptake of [³H]ISIS-9388, which suggests the involvement of (multiple) scavenger receptors. Size exclusion chromatography of mixtures of the oligonucleotides and rat plasma indicated that ISIS-9388 binds to a larger extent to high molecular weight proteins than ISIS-3082. Analysis by agarose gel electrophoresis indicated that ISIS-9388 binds more tightly to plasma proteins than ISIS-3082. The different interaction of the oligonucleotides with plasma proteins possibly explains their different dispositions. We conclude that cholesterol conjugation results in high accumulation of phosphorothioate oligodeoxynucleotides in various liver cell types, which is likely to be beneficial for antisense therapy of liver-associated diseases.     

Identification of Inositol 1,3,4-Trisphosphate 5-Kinase and Inositol 1,3,4,5-Tetrakisphosphate 6-Kinase in Immature Soybean Seeds

In extracts of immature soybean (Glycine max [L.] Merr.) seeds inositol tetrakisphosphate was formed from [³H]inositol 1,3,4-trisphosphate but not from [³H]inositol 1,4,5-trisphosphate. Inositol 1,3,4-trisphosphate kinase was purified to a specific activity of 3.55 min⁻¹ mg⁻¹ by polyethylenimine clarification and anion-exchange chromatography. The partially purified enzyme converted [³H]inositol 1,3,4-trisphosphate to inositol 1,3,4,5-tetrakisphosphate as the major product and inositol 1,3,4,6- and/or 1,2,3,4-tetrakisphosphate as the minor product. Subsequent experiments revealed a separate inositol 1,3,4,5-tetrakisphosphate 6-kinase activity, which could link these enzymes to inositol hexakisphosphate synthesis via the previously reported inositol 1,3,4,5,6-pentakisphosphate 2-kinase. The apparent K_m values for inositol 1,3,4-trisphosphate kinase were 200 ± 0 nm for inositol 1,3,4-trisphosphate and 171 ± 4 μm for ATP, and the reaction was not reversible. The kinetics were such that no activity could be detected using unlabeled inositol 1,3,4-trisphosphate and [γ-³²P]ATP, which suggested that other kinases may have been observed when less purified fractions were incubated with radiolabeled ATP. Inositol 1,3,4-trisphosphate kinase was nonspecifically inhibited more than 80% by various inositol polyphosphates at a concentration of 100 μm.     

Selection for Rate and Efficiency of Lean Gain in the Rat

Full-sib family selection for rate (WP) or efficiency (WP/F) of protein gain in rats from 3 to 9 weeks of age was applied for five generations. Three rats per litter were killed to estimate carcass protein. Standardized response/cumulative selection for WP was.19±.10 for WP,.28±.10 for 3- to 9-week gain,.28±.08 for 9-week weight,.16±.08 for litter size,.22±.12 for skinning loss and -.07±.09 for fraction of protein in the live weight. Response from selection for WP/F was.18±.16 for WP/F,.20±.11 for WP,.21±.11 for weight gain,.16±.11 for 3-week weight,.21±.10 for 9-week weight, but negligible for skinning loss or body protein. Response to WP/F selection was extremely variable among generations, associated with generation differences in weight and composition at 9 weeks. Estimates of heritability from offspring-midparent regression were.20±.12 for WP and.24±.08 for WP/F. Estimates of genotype-generation environment interaction were large for growth, feed intake and skinning loss. Maternal effects were large for weaning weight, fraction of body protein and WP. Sire component genetic correlations were 1.08±.13 for WP with total gain,.92±.08 for WP/F with gross efficiency and.29±.25 for WP with WP/F. A partitional calorimeter was used to evaluate heat production of rats. Lines differed in average heat loss but not in heat loss per unit actual or metabolic weight. Response to selection has been steady for WP but probably could be improved by selecting for WP/F at a constant weight rather than a constant age.     

Application of a Propionyl Coenzyme A Synthetase for Poly(3-Hydroxypropionate-co-3-Hydroxybutyrate) Accumulation in Recombinant Escherichia coli

The genetic operon for propionic acid degradation in Salmonella enterica serovar Typhimurium contains an open reading frame designated prpE which encodes a propionyl coenzyme A (propionyl-CoA) synthetase (A. R. Horswill and J. C. Escalante-Semerena, Microbiology 145:1381–1388, 1999). In this paper we report the cloning of prpE by PCR, its overexpression in Escherichia coli, and the substrate specificity of the enzyme. When propionate was utilized as the substrate for PrpE, a K_m of 50 μM and a specific activity of 120 μmol · min⁻¹ · mg⁻¹ were found at the saturating substrate concentration. PrpE also activated acetate, 3-hydroxypropionate (3HP), and butyrate to their corresponding coenzyme A esters but did so much less efficiently than propionate. When prpE was coexpressed with the polyhydroxyalkanoate (PHA) biosynthetic genes from Ralstonia eutropha in recombinant E. coli, a PHA copolymer containing 3HP units accumulated when 3HP was supplied with the growth medium. To compare the utility of acyl-CoA synthetases to that of an acyl-CoA transferase for PHA production, PHA-producing recombinant strains were constructed to coexpress the PHA biosynthetic genes with prpE, with acoE (an acetyl-CoA synthetase gene from R. eutropha [H. Priefert and A. Steinbüchel, J. Bacteriol. 174:6590–6599, 1992]), or with orfZ (an acetyl-CoA:4-hydroxybutyrate-CoA transferase gene from Clostridium propionicum [H. E. Valentin, S. Reiser, and K. J. Gruys, Biotechnol. Bioeng. 67:291–299, 2000]). Of the three enzymes, PrpE and OrfZ enabled similar levels of 3HP incorporation into PHA, whereas AcoE was significantly less effective in this capacity.     

Effect of Three Factors in Cheese Production (pH, Salt, and Heat) on Mycobacterium avium subsp. paratuberculosis Viability

Low pH and salt are two factors contributing to the inactivation of bacterial pathogens during a 60-day curing period for cheese. The kinetics of inactivation for Mycobacterium avium subsp. paratuberculosis strains ATCC 19698 and Dominic were measured at 20°C under different pH and NaCl conditions commonly used in processing cheese. The corresponding D values (decimal reduction times; the time required to kill 1 log₁₀ concentration of bacteria) were measured. Also measured were the D values for heat-treated and nonheated M. avium subsp. paratuberculosis in 50 mM acetate buffer (pH 5.0, 2% [wt/vol] NaCl) and a soft white Hispanic-style cheese (pH 6.0, 2% [wt/vol] NaCl). Samples were removed at various intervals until no viable cells were detected using the radiometric culture method (BACTEC) for enumeration of M. avium subsp. paratuberculosis. NaCl had little or no effect on the inactivation of M. avium subsp. paratuberculosis, and increasing NaCl concentrations were not associated with decreasing D values (faster killing) in the acetate buffer. Lower pHs, however, were significantly correlated with decreasing D values of M. avium subsp. paratuberculosis in the acetate buffer. The D values for heat-treated M. avium subsp. paratuberculosis ATCC 19698 in the cheese were higher than those predicted by studies done in acetate buffer. The heat-treated M. avium subsp. paratuberculosis strains had lower D values than the nonheated cells (faster killing) both in the acetate buffer (pH 5, 2% [wt/vol] NaCl) and in the soft white cheese. The D value for heat-treated M. avium subsp. paratuberculosis ATCC 19698 in the cheese (36.5 days) suggests that heat treatment of raw milk coupled with a 60-day curing period will inactivate about 10³ cells of M. avium subsp. paratuberculosis per ml.     

Regioselective Sequential Modification of Chitosan via Azide-Alkyne Click Reaction: Synthesis,Characterization, and Antimicrobial Activity of Chitosan Derivatives and Nanoparticles

Recently, the attention of researchers has been drawn toward the synthesis of chitosan derivatives and their nanoparticles with enhanced antimicrobial activities. In this study, chitosan derivatives with different azides and alkyne groups were synthesized using click chemistry, and these were further transformed into nanoparticles by using the ionotropic gelation method. A series of chitosan derivatives was successfully synthesized by regioselective modification of chitosan via an azide-alkyne click reaction. The amino moieties of chitosan were protected during derivatization by pthaloylation and subsequently unblocked at the end to restore their functionality. Nanoparticles of synthesized derivatives were fabricated by ionic gelation to form complexes of polyanionic penta-sodium tripolyphosphate (TPP) and cationic chitosan derivatives. Particle size analysis showed that nanoparticle size ranged from 181.03 ± 12.73 nm to 236.50 ± 14.32 nm and had narrow polydispersity index and positive surface charge. The derivatives and corresponding nanoparticles were evaluated in vitro for antibacterial and antifungal activities against three gram-positive and gram-negative bacteria and three fungal strains, respectively. The minimum inhibitory concentration (MIC) of all derivatives ranged from 31.3 to 250 µg/mL for bacteria and 188 to1500 µg/mL for fungi and was lower than that of native chitosan. The nanoparticles with MIC ranging from 1.56 to 25 µg/mLfor bacteria and 94 to 750 µg/mL for fungi exhibited higher activity than the chitosan derivatives. Chitosan O-(1-methylbenzene) triazolyl carbamate and chitosan O-(1-methyl phenyl sulfide) triazolyl carbamate were the most active against the tested bacterial and fungal strains. The hemolytic assay on erythrocytes and cell viability test on two different cell lines (Chinese hamster lung fibroblast cells V79 and Human hepatic cell line WRL68) demonstrated the safety; suggesting that these derivatives could be used in future medical applications. Chitosan derivatives with triazole functionality, synthesized by Huisgen 1,3-dipolar cycloaddition, and their nanoparticles showed significant enhancement in antibacterial and antifungal activities in comparison to those associated with native, non-altered chitosan.