A novel detection strategy for odorant molecules based on controlled bioengineering of rat olfactory receptor I7

In this study, we report a dose-dependent detection of odorant molecules in solution by rat olfactory receptor I7 (OR I7) in its membrane fraction. The OR I7 is immobilized on a gold electrode by multilayer bioengineering based on a mixed self-assembled monolayer and biotin/avidin system, which allows for a well-controlled immobilization of the bioreceptor within its lipid environment. The odorant detection is electronically performed in a quantitative manner by electrochemical impedance spectroscopy (EIS) measurements on samples and controls.     

Immobilization of native membrane-bound rhodopsin on biosensor surfaces

In this paper, we evaluated the grafting of G-protein-coupled receptors (GPCRs) onto functionalized surfaces, which is a primary requirement to elaborate receptor-based biosensors, or to develop novel GPCR assays. Bovine rhodopsin, a prototypical GPCR, was used in the form of receptor-enriched membrane fraction. Quantitative immobilization of the membrane-bound rhodopsin either non-specifically on a carboxylated dextran surface grafted with long alkyl groups, or specifically on a surface coated with anti-rhodopsin antibody was demonstrated by surface plasmon resonance. In addition, a new substrate based on mixed self-assembled multilayer that anchors specific anti-receptor antibodies was developed. Electrochemical impedance spectroscopy performed upon deposition of membrane-bound rhodopsin of increasing concentration exhibited a significant change, until a saturation level was reached, indicating optimum receptor immobilization on the substrate. The structures obtained with this new immobilization procedure of the rhodopsin in its native membrane environment are stable, with a controlled density of specific anchoring sites. Therefore, such receptor immobilization method is attractive for a range of applications, especially in the field of GPCR biosensors.     

Patterning of photosensitive polyimide LB film and its application in the fabrication of biomolecular microphotodiode array

Ultra thin film of photosensitive polyimide having benzene and sulfonyloxyimide moieties in the main chain was prepared using a Langmuir-Blodgett (LB) technique, and then micro array pattern of the polyimide LB film on a gold substrate was obtained by deep UV lithographic technique. In order to array cytochrome c molecules along the micro-patterned gold substrate, the well-characterized monolayer of cytochrome c was immobilized with a mixed monolayer of 11-mercaptoundecanoic acid (11-MUDA) and decanethiol. The redox activity and electron transfer between cytochrome c molecular center and gold electrode interface for the self-assembled cytochrome c monolayer were investigated by cyclic voltammetry measurement. Biomolecular photodiode consisting of cytochrome c and green fluorescent protein (GFP) onto the patterned gold substrate was fabricated by self-assembly process. The integration and morphology of cytochrome c and GFP were studied from the measurements of atomic force microscopy (AFM) and fluorescence emission. Especially, current-voltage characteristics of the protein multilayers were investigated by scanning tunneling microscopy (STM) and its application in biomolecular photodiode was also examined.     

Amperometric immunosensor for the detection of Escherichia coli O157:H7 in food specimens

A novel, label-free amperometric immunosensor has been developed for the rapid detection of heat-killed Escherichia coli O157:H7 (E. coli O157:H7). This immunosensor was prepared as follows. First, the long-chain, amine-terminated alkanethiol 11-amino-1-undecanethiol hydrochloride (AUT) was self-assembled onto a gold electrode surface to form an ordered, oriented, compact, and stable monolayer possessing -NH(2) functional groups that could immobilize massive gold nanoparticles (GNPs). Next, chitosan-multiwalled carbon nanotubes-SiO(2)/thionine (CHIT-MWNTs-SiO(2)@THI) nanocomposites and GNPs multilayer films were prepared via layer-by-layer (LBL) assembly. The surface area enhancement from the LBL assembly of the multilayer films improves the stability of the immobilized CHIT-MWNTs-SiO(2)@THI. More important, the sensitivity and stability of the immunosensor can be enhanced proportionally to the quantity of the THI mediator immobilized on the electrode surface. Finally, the E. coli O157:H7 antibody (anti-E. coli O157:H7) was covalently bound to the GNP monolayer and its bioactivity was measured by enzyme-linked immunosorbent assay (ELISA). Transmission electron microscopy (TEM) was employed to characterize the morphology of the MWNTs, CHIT-MWNTs, and CHIT-MWNTs-SiO(2)@THI. Under optimal conditions, the calibration curve for heat-killed E. coli O157:H7 has a working range of 4.12×10(2)-4.12×10(5) colony-forming units (CFU)/ml, and the total assay time was less than 45 min.     

Application of impedance spectroscopy for monitoring colloid Au-enhanced antibody immobilization and antibody-antigen reactions

We used colloidal Au to enhance the amount of antibody immobilized on a gold electrode and ultimately monitored the interaction of antigen-antibody by impedance measurement. Self-assembly of 6 nm (diameter) colloidal Au onto the self-assembled monolayers (SAMs) of 4-aminothiophenol modified gold electrode resulted in an easier attachment of antibody. The redox reactions of [Fe(CN)6](4-)/[Fe(CN)6](3-) on the gold surface were blocked due to the procedures of self-assembly of 4-aminothiophenol and antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.4 with various concentrations of antigen at 37 degrees C for 30 min. The antibody recognition layers and their interactions with various concentrations of antigen could be detected by measurements of the impedance change. The results show that this method has good correlation for detection of Hepatitis B virus surface antigen in the range of 0.5-200 microg/l and a detection limit of about 50 ng/l.     

Human cytomegalovirus detection by a quartz crystal microbalance immunosensor

A piezoelectric affinity sensor has been developed to detect distinctive antigens of the human cytomegalovirus. Either the specific antibodies or the antigen were immobilized on the gold electrode. To develop a rapid immunoassay, various assay formats were tested in relation with the different antigen composition. First, a direct assay was carried out immobilizing the specific antibody on the crystal surface by passive adsorption. Next, Protein A, thiol/poly L-lysine mixed self-assembled monolayers were tested as methods of gold modification. A competitive format was exploited by immobilization of the antigen onto the crystal activated by SAM and poly L-lysine. This procedure yielded a preliminary calibration curve. A linear range between 2.5 and 5 μg/ml of gB epitope in solution and a detection limit of 1 μg/ml were measured.     

SEIRA spectroscopy on a membrane receptor monolayer using lipoprotein particles as carriers

Surface-enhanced infrared absorption (SEIRA) difference spectroscopy can probe reactions in a protein monolayer tethered to a nanostructured gold surface. SEIRA studies of membrane proteins, however, remain challenging due to sample stability, effects of the metal surface on function, and the need for a membrane-mimicking environment. Here we demonstrate and characterize a model system for membrane receptor investigations using SEIRA spectroscopy. The system employs nanoscale apolipoprotein bound bilayer (NABB) particles, similar to discoidal high-density lipoprotein particles, as soluble carriers for the G-protein-coupled receptor rhodopsin. The His-tag of the engineered apolipoprotein allows for selective binding of the NABBs to a Ni-NTA modified surface, while the lipid environment of the particle ensures stability and protection of the embedded receptor. Using SEIRA spectroscopy, we followed specific binding of rhodopsin-loaded NABB particles to the surface and formation of a membrane protein monolayer. Functionality of the photoreceptor in the immobilized NABBs was probed by SEIRA difference spectroscopy confirming protein conformational changes associated with photoactivation. Orientation of the immobilized NABB particles was assessed by comparing SEIRA data with polarized attenuated total reflection-Fourier-transform infrared spectroscopy. Thus, SEIRA difference spectroscopy supported by the NABB technology provides a promising approach for further functional studies of transmembrane receptors.     

Ultrasensitive electrochemical immunosensor for ochratoxin A using gold colloid-mediated hapten immobilization

A convenient, specific, and highly sensitive electrochemical immunosensor based on an indirect competitive assay format was developed for the determination of ochratoxin A (OTA), a common toxic contaminant in various kinds of agricultural products. The sensing substrate was prepared using a gold electrode modified with a self-assembled monolayer of 1,6-hexanedithiol that mediated the assembly of a gold colloid layer, which could enhance the surface loading of OTA-ovalbumin conjugate and improve the sensitivity in electrochemical readouts. After competition of the limited anti-OTA mouse monoclonal antibody between immobilized hapten and OTA analyte in sample solution, alkaline phosphatase (ALP)-labeled horse anti-mouse immunoglobulin G (IgG) antibody was selectively bound onto the surface of the electrode, affording an indicator for OTA concentration in the sample. Electrochemical response arising from the oxidation of enzymatic product of 1-naphthyl phosphate was observed to be inversely proportional to OTA concentration in the range from 10 pg/ml to 100 ng/ml with a detection limit as low as 8.2 pg/ml. Furthermore, a negligible matrix effect and good recoveries were obtained in the determination of corn samples, evidencing the feasibility of the proposed method for accurate determination of OTA in corn samples.     

In vivo detection of membrane protein expression using surface plasmon enhanced fluorescence spectroscopy (SPFS)

Surface plasmon enhanced fluorescence spectroscopy (SPFS) was applied for the detection of expression and functional incorporation of integral membrane proteins into plasma membranes of living cells in real time. A vesicular stomatitis virus (VSV) tagged mutant of photoreceptor bovine rhodopsin was generated for high level expression with the semliki forest virus (SFV) system. Adherent baby hamster kidney (BHK-21) cells were cultivated on fibronectin-coated gold surfaces and infected with genetically engineered virus driving the expression of rhodopsin. Using premixed fluorescently (Alexa Fluor 647) labeled anti-mouse secondary antibody and monoclonal anti-VSV primary antibody, expression of rhodopsin in BHK-21 cells was monitored by SPFS. Fluorescence enhancement by surface plasmons occurs exclusively in the close vicinity of the gold surface. Thus, only the Alexa Fluor 647 labeled antibodies binding to the VSV-tag at rhodopsin molecules exposed on the cell surface experienced fluorescence enhancement, whereas, unbound antibody molecules in the bulk solution were negligibly excited. With this novel technique, we successfully recorded an increase of fluorescence with proceeding rhodopsin expression. Thus, we were able to observe the incorporation of heterologously expressed rhodopsin in the plasma membrane of living cells in real time using a relatively simple and rapid method. We confirmed our results by comparison with conventional wide field fluorescence microscopy.     

Electrochemical immunosensor with aptamer-based enzymatic amplification

An electrochemical immunosensor is reported by using aptamer-based enzymatic amplification with immunoglobulin E (IgE) as the model analyte. In this method, the IgE antibody is covalently immobilized as the capture probe on the gold electrode via a self-assembled monolayer of cysteamine. After the target is captured, the biotinylated anti-IgE aptamer is used as the detection probe. The specific interaction of streptavidin-conjugated alkaline phosphatase to the surface-bound biotinylated detection probe mediates a catalytic reaction of ascorbic acid 2-phosphate substrate to produce a reducing agent ascorbic acid. Then silver ions in the solution can be reduced, leading to the deposition of metallic silver on the electrode surface. The amount of deposited silver, which is determined by the amount of IgE target bound on the electrode surface, can be quantified using the stripping voltammetry. The results obtained demonstrated that the electrochemical immunosensor possesses high specificity and a wide dynamic range with a low detection limit that possibly arises from the combination of the highly specific aptamer and the highly sensitive stripping determination of enzymatically deposited silver.     

A comparative study of capacitive immunosensors based on self-assembled monolayers formed from thiourea, thioctic acid, and 3-mercaptopropionic acid

A procedure was developed for the covalent coupling of anti-alpha-fetoprotein antibody (anti-AFP) to a gold surface modified with a self-assembled monolayer (SAM) of thiourea (TU). The performance of the SAM-antibody layer was compared to those of similar layers based on thioctic acid (TA) and 3-mercaptopropionic acid (MPA) by using flow injection capacitive immunosensor system. Covalent coupling of anti-AFP on self-assembled thiourea monolayer (SATUM) modified gold electrode can be used to detect alpha-fetoprotein with high efficiency, similar sensitivity, the same linear range (0.01-10 microgl(-1)) and detection limit (10 ngl(-1)) as those obtained from sensors based on self-assembled thioctic acid monolayer (SATAM) and self-assembled 3-mercaptopropionic acid monolayer (SAMPAM). The system is specific for alpha-fetoprotein and can be regenerated and reused up to 48 times. Therefore, self-assembled monolayer using thiourea which is cheaper than thioctic acid and 3-mercaptopropionic acid is a good alternative for biosensor applications when SAMs are used.     

Layer-by-layer assembly of multilayer films composed of avidin and biotin-labeled antibody for immunosensing

Protein multilayers composed of avidin and biotin-labeled antibody (bio-Ab) were prepared on gold surface by layer-by-layer assembly technology using the high specific binding constant (K(a): approximately 10(15) M(-1)) between avidin and biotin. The assembly process of the multilayer films was monitored by using real-time BIA technique based on surface plasmon resonance (SPR). The multilayer films were also characterized by electrochemical impedance spectroscopy (EIS) and reflection absorption Fourier transform infrared spectroscopy (FTIR). The results indicate that the growth of the multilayer is uniform. From response of SPR for each layer, the stoichiometry S for the interaction between avidin and bio-Ab is calculated to be 0.37 in the multilayer whereas 0.82 in the first layer. The protein mass concentration for each layer was also obtained. The schematic figure for the multilayer assembly was proposed according to the layer mass concentration and S value. The utility of the mutilayer films for immunosensing has been investigated via their subsequent interaction with hIgG. The binding ability of the multilayer increased for one to three layers of antibody, and then reach saturation after the fourth layer. These layer-by-layer constructed antibody multilayers enhance the binding ability than covalently immobilized monolayer antibody. This technology can be also used for construction of other thin films for immunosensing and biosensor.     

Detecting penicillin G in milk with impedimetric label-free immunosensor

A label-free impedimetric flow injection immunosensor for the direct detection of penicillin G has been developed. Anti-penicillin G was immobilized on a gold working electrode modified with a self-assembled monolayer of thioctic acid. Real time monitoring of impedance was carried out at the optimum frequency of 160 Hz. Under optimum operating conditions the system provided a wide linear range between 1.0 x 10(-13) and 1.0 x 10(-8) M with a very low detection limit of 3.0 x 10(-15) M, much lower than the MRL of penicillin G in milk (1.2 x 10(-8) M). The immobilized anti-penicillin G on self-assembled thioctic acid monolayer gold electrode was very stable and provided good reproducible signal after regeneration up to 45 times with a relative standard deviation (R.S.D.) lower than 4%. Good recoveries and precisions were obtained when spiked raw milk samples were analyzed.     

DNA microdevice for electrochemical detection of Escherichia coli 0157:H7 molecular markers

An electrochemical DNA sensor based on the hybridization recognition of a single-stranded DNA (ssDNA) probe immobilized onto a gold electrode to its complementary ssDNA is presented. The DNA probe is bound on gold surface electrode by using self-assembled monolayer (SAM) technology. An optimized mixed SAM with a blocking molecule preventing the nonspecific adsorption on the electrode surface has been prepared. In this paper, a DNA biosensor is designed by means of the immobilization of a single stranded DNA probe on an electrochemical transducer surface to recognize specifically Escherichia coli (E. coli) 0157:H7 complementary target DNA sequence via cyclic voltammetry experiments. The 21 mer DNA probe including a C6 alkanethiol group at the 5' phosphate end has been synthesized to form the SAM onto the gold surface through the gold sulfur bond. The goal of this paper has been to design, characterise and optimise an electrochemical DNA sensor. In order to investigate the oligonucleotide probe immobilization and the hybridization detection, experiments with different concentration of DNA and mismatch sequences have been performed. This microdevice has demonstrated the suitability of oligonucleotide Self-assembled monolayers (SAMs) on gold as immobilization method. The DNA probes deposited on gold surface have been functional and able to detect changes in bases sequence in a 21-mer oligonucleotide.     

A novel electroconductive interface based on Fe3O4 magnetic nanoparticle and cysteamine functionalized AuNPs: Preparation and application as signal amplification element to minoring of antigen‐antibody immunocomplex and biosensing of prostate cancer

In this study, a novel electroconductive interface was prepared based on Fe₃O₄ magnetic nanoparticle and cysteamine functionalized gold nanoparticle. The engineered interface was used as signal amplification substrate in the electrochemical analysis of antibody‐antigen binding. For this purpose, biotinilated‐anti‐prostate‐specific antigen (PSA) antibody was bioconjugated with iron oxide magnetic nanoparticles (Fe₃O₄) and drop‐casted on the surface of glassy carbon electrode (GCE). Also, secondary antibody (HRP‐Ab2) encapsulated on gold nanoparticles caped by cysteamine was immobilized on the surface of GCE modified electrode. A transmission electron microscopy images shows that a sandwich immunoreaction was done and binding of Ab1 and Ab2 performed successfully. Various parameters of immunoassay, including the loading of magnetic nanoparticles, the amount of gold nanoparticle conjugate, and the immunoreaction time, were optimized. The detection limit of 0.001 μg. L^?1 of PSA was obtained under optimum experimental conditions. It is found that such magneto‐bioassay could be readily used for simultaneous parallel detection of multiple proteins by using multiple inorganic metal nanoparticle tracers and are expected to open new opportunities for early stage diagnosis of cancer in near future.     

Ultra trace analysis of small molecule by label-free impedimetric immunosensor using multilayer modified electrode

A multilayer electrode modified with a self-assembled thiourea monolayer (SATUM) followed by gold nanoparticles (AuNPs), mercaptosuccinic acid (MSA) and antibody was investigated for the detection of ultra trace amount of a small molecule (chloramphenicol) in an impedimetric system. The formation of the antibody-antigen complex at the electrode surface caused the impedance to increase. Under optimum conditions three modified electrodes were compared the SATUM/AuNPs/MSA electrode provided a wide linear range (0.50-10) × 10?1? M, and a very low determination limit of 1.0 × 10?1? M. This determination limit was much lower than the SATUM/AuNPs electrode, 1.0 × 10?1? M, and SATUM electrode, 4.7 × 10?1? M. The modified electrode provided good selectivity for chloramphenicol detection and can be reused up to 45 times with a relative standard deviation of lower than 4%. When applied to determine chloramphenicol in shrimp samples, the results agreed well with those obtained by the high-performance liquid chromatography coupled with a photo diode array detector (P > 0.05). The developed system can be applied to detect other small molecules using appropriate affinity binding pairs.     

Electrochemical impedimetric immunosensor for insulin like growth factor-1 using specific monoclonal antibody-nanogold modified electrode

An electrochemical impedimetric immunosensor was developed for ultrasensitive determination of insulin-like growth factor-1 (IGF-1) based on immobilization of a specific monoclonal antibody on gold nanoparticles (GNPs) modified gold electrode. Self-assembly of colloidal gold nanoparticles on the gold electrode was conducted through the thiol groups of 1,6-hexanedithiol (HDT) monolayer as a cross linker. The redox reactions of [Fe(CN)(6)](4-)/[Fe(CN)(6)](3-) on the electrode surface was probed for studying the immobilization and determination processes, using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The interaction of antigen with grafted antibody recognition layer was carried out by soaking the modified electrode into antigen solution at 37°C for 3 h. The immunosensor showed linearity over 1.0-180.0 pg mL(-1) and the limit of detection was 0.15 pg mL(-1). The association constant between IGF-1 and immobilized antibody was calculated to be 9.17×10(11) M(-1). The proposed method is a useful tool for screening picogram amounts of IGF-1 in clinical laboratory as a diagnostic test.     

基于硫醇自组装的肌红蛋白单克隆抗体金膜固相载体的构建

为了在金膜固相载体上固定肌红蛋白单克隆抗体 (MbAb),通过在金膜上生长一层巯基酸和巯基醇的混合自组装分子膜 (SAMs),用原子力显微镜 (AFM) 和X射线光电子能谱仪 (XPS) 分析样品的性质,再以1-(3-二甲基氨基丙基) 3-乙基碳化二亚胺盐酸 (EDC·HCl) 作为催化剂,自组装膜和抗体的氨基发生偶联反应,将抗体固定在金膜表面,并进行肌红蛋白抗原 (MbAg) 的测定。结果显示,通过条件优化实验,发现50 mmol/L的巯基16酸和巯基11醇混合乙醇溶液,60 ℃处理金膜3 h后,再偶联     

Highly sensitive electrochemical detection of immunospecies based on combination of Fc label and PPD film/gold nanoparticle amplification

A highly sensitive electrochemical immunoassay strategy based on the combination of ferrocene (Fc) label and poly(o-phenylenediamine) (PPD) film/gold nanoparticle (GNP) amplification for the detection of immunospecies is proposed using human IgG as the model analyte. A gold electrode is firstly modified with an electropolymerized film of poly(o-phenylenediamine), which provides a stable matrix with abundant amino-groups for the fabrication of sensing interface. Using glutaraldehyde as a cross-linker, cystamine is coupled onto the modified electrode. Subsequently, gold nanoparticle monolayer is assembled onto the resulting surface. Making use of the unique properties of gold nanoparticles, antibodies can be self-assembled onto the surface-confined gold nanoparticles via amine-Au affinity with a high loading amount and reserve high immunological activity. After the introduction of model analyte, the ferrocene (Fc)-labeled antibody is immobilized on the sensing interface by antibody-antigen specific reaction, resulting in a redox current signal. The peak current is proportional to the amount of the analyte. Under the optimized experimental conditions, the proposed sensing strategy provides a wide linear dynamic range from 25 to 1000pg/mL with a low detection limit of 10pg/mL. In addition, good reproducibility, high selectivity and stability are achieved. In particular, the extremely high stability of both poly(o-phenylenediamine) and gold nanoparticle monolayer allows the designed biosensing interface to withstand harsh regeneration treatment, making it reusable.     

Ultrastructural localization of rhodopsin in the vertebrate retina

Early work by Dewey and collaborators has shown the distribution of rhodopsin in the frog retina. We have repeated these experiments on cow and mouse eyes using antibodies specific to rhodopsin alone. Bovine rhodopsin in emulphogene was purified on an hydroxyapatite column. The purity of this reagent was established by spectrophotometric criteria, by sodium dodecyl sulfate (SDS) gel electrophoresis, and by isoelectric focusing. This rhodopsin was used as an immunoadsorbent to isolate specific antibodies from the antisera of rabbits immunized with bovine rod outer segments solubilized in 2% digitonin. The antibody so prepared was shown by immunoelectrophoresis to be in the IgG class and did not cross-react with lipid extracts of bovine rod outer segments. Papain-digested univalent antibodies (Fab) coupled with peroxidase were used to label rhodopsin in formaldehyde-fixed bovine and murine retinas. In addition to the disk membranes, the plasma membrane of the outer segment, the connecting cilium, and part of the rod inner segment membrane were labeled. We observed staining on both sides of the rod outer segment plasma membrane and the disk membrane. Discrepancies were observed between results of immunolabeling experiments and observations of membrane particles seen in freeze-cleaved specimens. Our experiments indicate that the distribution of membrane particles in freeze cleaving experiments reflects the distribution of membrane proteins. Immunolabeling, on the other hand, can introduce several different types of artifact, unless controlled with extreme care.