Actin filament attachments for sustained motility in vitro are maintained by filament bundling

We reconstructed cellular motility in vitro from individual proteins to investigate how actin filaments are organized at the leading edge. Using total internal reflection fluorescence microscopy of actin filaments, we tested how profilin, Arp2/3, and capping protein (CP) function together to propel thin glass nanofibers or beads coated with N-WASP WCA domains. Thin nanofibers produced wide comet tails that showed more structural variation in actin filament organization than did bead substrates. During sustained motility, physiological concentrations of Mg(2+) generated actin filament bundles that processively attached to the nanofiber. Reduction of total Mg(2+) abolished particle motility and actin attachment to the particle surface without affecting actin polymerization, Arp2/3 nucleation, or filament capping. Analysis of similar motility of microspheres showed that loss of filament bundling did not affect actin shell formation or symmetry breaking but eliminated sustained attachments between the comet tail and the particle surface. Addition of Mg(2+), Lys-Lys(2+), or fascin restored both comet tail attachment and sustained particle motility in low Mg(2+) buffers. TIRF microscopic analysis of filaments captured by WCA-coated beads in the absence of Arp2/3, profilin, and CP showed that filament bundling by polycation or fascin addition increased barbed end capture by WCA domains. We propose a model in which CP directs barbed ends toward the leading edge and polycation-induced filament bundling sustains processive barbed end attachment to the leading edge.     

A biomimetic motility assay provides insight into the mechanism of actin-based motility

Abiomimetic motility assay is used to analyze the mechanism of force production by site-directed polymerization of actin. Polystyrene microspheres, functionalized in a controlled fashion by the N-WASP protein, the ubiquitous activator of Arp2/3 complex, undergo actin-based propulsion in a medium that consists of five pure proteins. We have analyzed the dependence of velocity on N-WASP surface density, on the concentration of capping protein, and on external force. Movement was not slowed down by increasing the diameter of the beads (0.2 to 3 microm) nor by increasing the viscosity of the medium by 10(5)-fold. This important result shows that forces due to actin polymerization are balanced by internal forces due to transient attachment of filament ends at the surface. These forces are greater than the viscous drag. Using Alexa488-labeled Arp2/3, we show that Arp2/3 is incorporated in the actin tail like G-actin by barbed end branching of filaments at the bead surface, not by side branching, and that filaments are more densely branched upon increasing gelsolin concentration. These data support models in which the rates of filament branching and capping control velocity, and autocatalytic branching of filament ends, rather than filament nucleation, occurs at the particle surface.     

Grb2 and Nck act cooperatively to promote actin-based motility of vaccinia virus

The Wiskott-Aldrich syndrome protein family member N-WASP is a key integrator of the multiple signalling pathways that regulate actin polymerization via the Arp2/3 complex. Our previous studies have shown that N-WASP is required for the actin-based motility of vaccinia virus and is recruited via Nck and WIP. We now show that Grb2 is an additional component of the vaccinia actin tail-forming complex. Recruitment of Nck and Grb2 to viral particles requires phosphorylation of tyrosine residues 112 and 132 of A36R, the vaccinia actin tail nucleator, respectively. The presence of Grb2 on the virus is also dependent on the polyproline-rich region of N-WASP. The Grb2 pathway alone is therefore unable to nucleate actin tails, as its recruitment requires the prior recruitment of N-WASP by Nck. However, Grb2 does play an important role in actin-based motility of vaccinia, as in its absence, the mean number of actin tails per cell is reduced 2.6-fold. Thus, both Nck and Grb2 act in a cooperative manner to stabilize and/or activate the vaccinia actin-nucleating complex. We suggest that such cooperativity between "primary" and "secondary" adaptor proteins is likely to be a general feature of receptor-mediated signalling.     

Listeria's right-handed helical rocket-tail trajectories: mechanistic implications for force generation in actin-based motility

Listeria monocytogenes forms right-handed helical rocket tail trajectories during actin-based motility in cell-free extracts, and this stereochemical feature is consistent with actoclampin's affinity-modulated, clamped-filament elongation model [Dickinson and Purich, 2002: Biophys J 82:605-617]. In that mechanism, right-handed torque is generated by an end-tracking molecular motor, each comprised of a filament barbed end and clamping protein that processively traces the right-handed helix of its filament partner. By contrast, torque is not a predicted property of those models (e.g., elastic propulsion, elastic Brownian ratchet, tethered ratchet, and insertional polymerization models) requiring filament barbed ends to depart/detach from the motile object's surface during/after each monomer-addition step. Helical trajectories also explain why Listeria undergoes longitudinal-axis rotation on a length-scale matching the helical periodicity of Listeria's rocket tails.     

A Rickettsia WASP-like protein activates the Arp2/3 complex and mediates actin-based motility

Spotted fever group Rickettsia are obligate intracellular pathogens that exploit the host cell actin cytoskeleton to promote motility and cell-to-cell spread. Although other pathogens such as Listeria monocytogenes use an Arp2/3 complex-dependent nucleation mechanism to generate comet tails consisting of Y-branched filament arrays, Rickettsia polymerize tails consisting of unbranched filaments by a previously unknown mechanism. We identified genes in several Rickettsia species encoding proteins (termed RickA) with similarity to the WASP family of Arp2/3-complex activators. Rickettsia rickettsii RickA activated both the nucleation and Y-branching activities of the Arp2/3 complex like other WASP-family proteins, and was sufficient to direct the motility of microscopic beads in cell extracts. Actin tails generated by RickA-coated beads consisted of Y-branched filament networks. These data suggest that Rickettsia use an Arp2/3 complex-dependent actin-nucleation mechanism similar to that of other pathogens. We propose that additional Rickettsia or host factors reorganize the Y-branched networks into parallel arrays in a manner similar to a recently proposed model of filopodia formation.     

Actin-dependent propulsion of endosomes and lysosomes by recruitment of N-WASP

We examined the spatial and temporal control of actin assembly in living Xenopus eggs. Within minutes of egg activation, dynamic actin-rich comet tails appeared on a subset of cytoplasmic vesicles that were enriched in protein kinase C (PKC), causing the vesicles to move through the cytoplasm. Actin comet tail formation in vivo was stimulated by the PKC activator phorbol myristate acetate (PMA), and this process could be reconstituted in a cell-free system. We used this system to define the characteristics that distinguish vesicles associated with actin comet tails from other vesicles in the extract. We found that the protein, N-WASP, was recruited to the surface of every vesicle associated with an actin comet tail, suggesting that vesicle movement results from actin assembly nucleated by the Arp2/3 complex, the immediate downstream target of N-WASP. The motile vesicles accumulated the dye acridine orange, a marker for endosomes and lysosomes. Furthermore, vesicles associated with actin comet tails had the morphological features of multivesicular endosomes as revealed by electron microscopy. Endosomes and lysosomes from mammalian cells preferentially nucleated actin assembly and moved in the Xenopus egg extract system. These results define endosomes and lysosomes as recruitment sites for the actin nucleation machinery and demonstrate that actin assembly contributes to organelle movement. Conversely, by nucleating actin assembly, intracellular membranes may contribute to the dynamic organization of the actin cytoskeleton.     

Phosphatidylinositol 4,5-biphosphate (PIP2)-induced vesicle movement depends on N-WASP and involves Nck,WIP, and Grb2

Wiskott-Aldrich syndrome protein (WASP)/Scar family proteins promote actin polymerization by stimulating the actin-nucleating activity of the Arp2/3 complex. While Scar/WAVE proteins are thought to be involved in lamellipodia protrusion, the hematopoietic WASP has been implicated in various actin-based processes such as chemotaxis, podosome formation, and phagocytosis. Here we show that the ubiquitously expressed N-WASP is essential for actin assembly at the surface of endomembranes induced as a consequence of increased phosphatidylinositol 4,5-biphosphate (PIP2) levels. This process resulting in the motility of intracellular vesicles at the tips of actin comets involved the recruitment of the Src homology 3 (SH3)-SH2 adaptor proteins Nck and Grb2 as well as of WASP interacting protein (WIP). Reconstitution of vesicle movement in N-WASP-defective cells by expression of various N-WASP mutant proteins revealed three independent domains capable of interaction with the vesicle surface, of which both the WH1 and the polyproline domains contributed significantly to N-WASP recruitment and/or activation. In contrast, the direct interaction of N-WASP with the Rho-GTPase Cdc42 was not required for reconstitution of vesicle motility. Our data reveal a distinct cellular phenotype for N-WASP loss of function, which adds to accumulating evidence that the proposed link between actin and membrane dynamics may, at least partially, be reflected by the actin-based movement of vesicles through the cytoplasm.     

Mechanism of actin network attachment to moving membranes: barbed end capture by N-WASP WH2 domains

Actin filament networks exert protrusive and attachment forces on membranes and thereby drive membrane deformation and movement. Here, we show that N-WASP WH2 domains play a previously unanticipated role in vesicle movement by transiently attaching actin filament barbed ends to the membrane. To dissect the attachment mechanism, we reconstituted the propulsive motility of lipid-coated glass beads, using purified soluble proteins. N-WASP WH2 mutants assembled actin comet tails and initiated movement, but the comet tails catastrophically detached from the membrane. When presented on the surface of a lipid-coated bead, WH2 domains were sufficient to maintain comet tail attachment. In v-Src-transformed fibroblasts, N-WASP WH2 mutants were severely defective in the formation of circular podosome arrays. In addition to creating an attachment force, interactions between WH2 domains and barbed ends may locally amplify signals for dendritic actin nucleation.     

Processive acceleration of actin barbed-end assembly by N-WASP

Neuronal Wiskott–Aldrich syndrome protein (N-WASP)–activated actin polymerization drives extension of invadopodia and podosomes into the basement layer. In addition to activating Arp2/3, N-WASP binds actin-filament barbed ends, and both N-WASP and barbed ends are tightly clustered in these invasive structures. We use nanofibers coated with N-WASP WWCA domains as model cell surfaces and single-actin-filament imaging to determine how clustered N-WASP affects Arp2/3-independent barbed-end assembly. Individual barbed ends captured by WWCA domains grow at or below their diffusion-limited assembly rate. At high filament densities, however, overlapping filaments form buckles between their nanofiber tethers and myosin attachment points. These buckles grew ∼3.4-fold faster than the diffusion-limited rate of unattached barbed ends. N-WASP constructs with and without the native polyproline (PP) region show similar rate enhancements in the absence of profilin, but profilin slows barbed-end acceleration from constructs containing the PP region. Increasing Mg²⁺ to enhance filament bundling increases the frequency of filament buckle formation, consistent with a requirement of accelerated assembly on barbed-end bundling. We propose that this novel N-WASP assembly activity provides an Arp2/3-independent force that drives nascent filament bundles into the basement layer during cell invasion.     

A novel role for WAVE1 in controlling actin network growth rate and architecture

Branched actin filament networks in cells are assembled through the combined activities of Arp2/3 complex and different WASP/WAVE proteins. Here we used TIRF and electron microscopy to directly compare for the first time the assembly kinetics and architectures of actin filament networks produced by Arp2/3 complex and dimerized VCA regions of WAVE1, WAVE2, or N-WASP. WAVE1 produced strikingly different networks from WAVE2 or N-WASP, which comprised unexpectedly short filaments. Further analysis showed that the WAVE1-specific activity stemmed from an inhibitory effect on filament elongation both in the presence and absence of Arp2/3 complex, which was observed even at low stoichiometries of WAVE1 to actin monomers, precluding an effect from monomer sequestration. Using a series of VCA chimeras, we mapped the elongation inhibitory effects of WAVE1 to its WH2 (“V”) domain. Further, mutating a single conserved lysine residue potently disrupted WAVE1''s inhibitory effects. Taken together, our results show that WAVE1 has unique activities independent of Arp2/3 complex that can govern both the growth rates and architectures of actin filament networks. Such activities may underlie previously observed differences between the cellular functions of WAVE1 and WAVE2.     

Dynamin is required for F-actin assembly and pedestal formation by enteropathogenic Escherichia coli (EPEC)

After attaching to human intestinal epithelial cells, enteropathogenic Escherichia coli (EPEC) induces the formation of an actin-rich pedestal-like structure. The signalling pathway leading to pedestal formation is initiated by the bacterial protein Tir, which is inserted into the host cell plasma membrane. The domain exposed on the cell surface binds to another bacterial protein, intimin, while one of the cytoplasmic domains binds the adaptor protein Nck. This leads to recruitment of other cytoskeletal proteins including neural Wiskott-Aldrich syndrome protein (N-WASP) and Arp2/3, resulting in focused actin polymerization at the site of bacterial attachment. In this study we investigated the role of the large GTPase dynamin 2 (Dyn2) in pedestal formation. We found that in HeLa cells, both endogenous and overexpressed Dyn2 were recruited to sites of EPEC attachment. Recruitment of endogenous Dyn2 required the presence of Tir, Nck and N-WASP but was independent of cortactin and Arp2/3. Knock-down of Dyn2 expression by RNA interference reduced actin polymerization and pedestal formation. Overexpression of dominant-negative mutants of Dyn2 also reduced pedestal formation and prevented recruitment of N-WASP, Arp3 and cortactin, but not Nck. Together, our results indicate that Dyn2 is an integral component of the signalling cascade leading to actin polymerization in EPEC pedestals.     

N-WASP plays a critical role in fibroblast adhesion and spreading

N-WASP (Neural Wiskott Aldrich Syndrome Protein) regulates actin polymerization by activating the Arp2/3 complex and promotes the formation of actin-rich structures such as filopodia. Such actin-rich structures play critical roles in cell adhesion and cell motility. Analysis of the adhesion properties of N-WASP^+/+ and N-WASP^−/− mouse embryonic fibroblasts to extracellular matrix proteins revealed that N-WASP is critical for cell adhesion to fibronectin. There was no significant difference in the localization of paxillin in the two cell lines, however the vinculin patches in WASP^+/+ cells were thicker and more prominent than those in N-WASP^−/− cells. The β1 integrins in N-WASP^+/+ cells were found in large clusters, while β1 integrins were more dispersed in N-WASP^−/− cells. The N-WASP^−/− cells migrated more rapidly than N-WASP^+/+ cells in a scratch migration assay. Thus, our data suggest that N-WASP deficiency leads to reduced adhesion to fibronectin and increased cell motility.     

A complex of N-WASP and WIP integrates signalling cascades that lead to actin polymerization

Wiskott-Aldrich syndrome protein (WASP) and N-WASP have emerged as key proteins connecting signalling cascades to actin polymerization. Here we show that the amino-terminal WH1 domain, and not the polyproline-rich region, of N-WASP is responsible for its recruitment to sites of actin polymerization during Cdc42-independent, actin-based motility of vaccinia virus. Recruitment of N-WASP to vaccinia is mediated by WASP-interacting protein (WIP), whereas in Shigella WIP is recruited by N-WASP. Our observations show that vaccinia and Shigella activate the Arp2/3 complex to achieve actin-based motility, by mimicking either the SH2/SH3-containing adaptor or Cdc42 signalling pathways to recruit the N-WASP-WIP complex. We propose that the N-WASP-WIP complex has a pivotal function in integrating signalling cascades that lead to actin polymerization.     

A neural Wiskott-Aldrich Syndrome protein-mediated pathway for localized activation of actin polymerization that is regulated by cortactin

Activation of the epidermal growth factor (EGF) receptor can stimulate actin polymerization via the Arp2/3 complex using a number of signaling pathways, and specific stimulation conditions may control which pathways are activated. We have previously shown that localized stimulation of EGF receptor with EGF bound to beads results in localized actin polymerization and protrusion. Here we show that the actin polymerization is dependent upon activation of the Arp2/3 complex by neural Wiskott-Aldrich Syndrome protein (N-WASP) via Grb2 and Nck2. Suppression of Grb2 or Nck2 results in loss of localization of N-WASP at the activation site and reduced actin polymerization. Although cortactin has been found to synergize with N-WASP for Arp2/3-dependent actin polymerization in vitro, we find that cortactin can restrict N-WASP localization around EGF-bead-induced protrusions. In addition, cortactin-deficient cells have increased lamellipod dynamics but show reduced net translocation, suggesting that cortactin can contribute to cell polarity by controlling the extent of Arp2/3 activation by WASP family members and the stability of the F-actin network.     

Dendritic organization of actin comet tails

Polymerization of actin filaments is necessary for both protrusion of the leading edge of crawling cells and propulsion of certain intracellular pathogens, and it is sufficient for generating force for bacterial motility in vitro. Motile intracellular pathogens are associated with actin-rich comet tails containing many of the same molecular components present in lamellipodia, and this suggests that these two systems use a similar mechanism for motility. However, available structural evidence suggests that the organization of comet tails differs from that of lamellipodia. Actin filaments in lamellipodia form branched arrays, which are thought to arise by dendritic nucleation mediated by the Arp2/3 complex. In contrast, comet tails have been variously described as consisting of short, randomly oriented filaments, with a higher degree of alignment at the periphery, or as containing long, straight axial filaments with a small number of oblique filaments. Because the assembly of pathogen-associated comet tails has been used as a model system for lamellipodial protrusion, it is important to resolve this apparent discrepancy. Here, using a platinum replica approach, we show that actin filament arrays in comet tails in fact have a dendritic organization with the Arp2/3 complex localizing to Y-junctions as in lamellipodia. Thus, comet tails and lamellipodia appear to share a common dendritic nucleation mechanism for protrusive motility. However, comet tails differ from lamellipodia in that their actin filaments are usually twisted and appear to be under significant torsional stress.     

The interaction between N-WASP and the Arp2/3 complex links Cdc42-dependent signals to actin assembly

Although small GTP-binding proteins of the Rho family have been implicated in signaling to the actin cytoskeleton, the exact nature of the linkage has remained obscure. We describe a novel mechanism that links one Rho family member, Cdc42, to actin polymerization. N-WASP, a ubiquitously expressed Cdc42-interacting protein, is required for Cdc42-stimulated actin polymerization in Xenopus egg extracts. The C terminus of N-WASP binds to the Arp2/3 complex and dramatically stimulates its ability to nucleate actin polymerization. Although full-length N-WASP is less effective, its activity can be greatly enhanced by Cdc42 and phosphatidylinositol (4,5) bisphosphate. Therefore, N-WASP and the Arp2/3 complex comprise a core mechanism that directly connects signal transduction pathways to the stimulation of actin polymerization.     

Two verprolin homology domains increase the Arp2/3 complex-mediated actin polymerization activities of N-WASP and WAVE1 C-terminal regions

WASP family proteins induce actin polymerization through a C-terminal verprolin homology, cofilin homology, and acidic (VCA) region by activating the Arp2/3 complex. The N-WASP VCA region is the most potent activator of the Arp2/3 complex. In addition, full-length WAVE1 and a WAVE1 VCA fragment show differential activity. The mechanisms underlying these differences are poorly understood. We examined the activities of various N-WASP and WAVE1 VCA mutant proteins with several types of fusion moieties. When fused to GST, maltose-binding protein, or the WAVE1 proline-rich domain, N-WASP VCA and WAVE1 VCA mutant proteins with two V motifs showed stronger activities than wild-type WAVE1 VCA with one V motif, demonstrating the importance of two V motifs for strong VCA activity. A WAVE1 VCA fragment tagged with six histidines (His) showed markedly reduced activity compared to GST-fused VCA, whereas His-tagged N-WASP VCA showed similar activity to GST-fused VCA. An additional V motif failed to enhance WAVE1 VCA activity in the His-tagged form. Thus, the WAVE1 VCA fragment may exist in an unfavorable conformation to activate the Arp2/3 complex, implying the existence of a structural difference between WAVE1 and N-WASP VCAs in addition to the number of V motifs.     

Defining mechanisms of actin polymerization and depolymerization during dendritic spine morphogenesis

Dendritic spines are small protrusions along dendrites where the postsynaptic components of most excitatory synapses reside in the mature brain. Morphological changes in these actin-rich structures are associated with learning and memory formation. Despite the pivotal role of the actin cytoskeleton in spine morphogenesis, little is known about the mechanisms regulating actin filament polymerization and depolymerization in dendritic spines. We show that the filopodia-like precursors of dendritic spines elongate through actin polymerization at both the filopodia tip and root. The small GTPase Rif and its effector mDia2 formin play a central role in regulating actin dynamics during filopodia elongation. Actin filament nucleation through the Arp2/3 complex subsequently promotes spine head expansion, and ADF/cofilin-induced actin filament disassembly is required to maintain proper spine length and morphology. Finally, we show that perturbation of these key steps in actin dynamics results in altered synaptic transmission.     

Different WASP family proteins stimulate different Arp2/3 complex-dependent actin-nucleating activities

Background: Assembly and organization of actin filaments are required for many cellular processes, including locomotion and division. In many cases, actin assembly is initiated when proteins of the WASP/Scar family respond to signals from Rho family G proteins and stimulate the actin-nucleating activity of the Arp2/3 complex. Two questions of fundamental importance raised in the study of actin dynamics concern the molecular mechanism of Arp2/3-dependent actin nucleation and how different signaling pathways that activate the same Arp2/3 complex produce actin networks with different three-dimensional architectures?Results: We directly compared the activity of the Arp2/3 complex in the presence of saturating concentrations of the minimal Arp2/3-activating domains of WASP, N-WASP, and Scar1 and found that each induces unique kinetics of actin assembly. In cell extracts, N-WASP induces rapid actin polymerization, while Scar1 fails to induce detectable polymerization. Using purified proteins, Scar1 induces the slowest rate of nucleation. WASP activity is 16-fold higher, and N-WASP activity is 70-fold higher. The data for all activators fit a mathematical model in which one activated Arp2/3 complex, one actin monomer, and an actin filament combine into a preactivation complex which then undergoes a first-order activation step to become a nucleus. The differences between Scar and N-WASP activity are explained by differences in the rate constants for the activation step. Changing the number of actin binding sites on a WASP family protein, either by removing a WH2 domain from N-WASP or by adding WH2 domains to Scar1, has no significant effect on nucleation activity. The addition of a three amino acid insertion found in the C-terminal acidic domains of WASP and N-WASP, however, increases the activity of Scar1 by more than 20-fold. Using chemical crosslinking assays, we determined that both N-WASP and Scar1 induce a conformational change in the Arp2/3 complex but crosslink with different efficiencies to the small molecular weight subunits p18 and p14.Conclusion: The WA domains of N-WASP, WASP, and Scar1 bind actin and Arp2/3 with nearly identical affinities but stimulate rates of actin nucleation that vary by almost 100-fold. The differences in nucleation rate are caused by differences in the number of acidic amino acids at the C terminus, so each protein is tuned to produce a different rate of actin filament formation. Arp2/3, therefore, is not regulated by a simple on-off switch. Precise tuning of the filament formation rate may help determine the architecture of actin networks produced by different nucleation-promoting factors.     

Insulin stimulates actin comet tails on intracellular GLUT4-containing compartments in differentiated 3T3L1 adipocytes

Incubation of isolated GLUT4-containing vesicles with Xenopus oocyte extracts resulted in a guanosine 5'-[gamma-thio]triphosphate (GTP gamma S) and sodium orthovanadate stimulation of actin comet tails. The in vitro actin-based GLUT4 vesicle motility was inhibited by both latrunculin B and a dominant-interfering N-WASP mutant, N-WASP/Delta VCA. Preparations of gently sheared (broken) 3T3L1 adipocytes also displayed GTP gamma S and sodium orthovanadate stimulation of actin comet tails on GLUT4 intracellular compartments. Furthermore, insulin pretreatment of intact adipocytes prior to gently shearing also resulted in a marked increase in actin polymerization and actin comet tailing on GLUT4 vesicles. In addition, the insulin stimulation of actin comet tails was completely inhibited by Clostridum difficile toxin B, demonstrating a specific role for a Rho family member small GTP-binding protein. Expression of N-WASP/Delta VCA in intact cells had little effect on adipocyte cortical actin but partially inhibited insulin-stimulated GLUT4 translocation. Taken together, these data demonstrate that insulin can induce GLUT4 vesicle actin comet tails that are necessary for the efficient translocation of GLUT4 from intracellular storage sites to the plasma membrane.