Removal of N-terminal methionine from recombinant proteins by engineered E. coli methionine aminopeptidase

The removal of N-terminal translation initiator Met by methionine aminopeptidase (MetAP) is often crucial for the function and stability of proteins. On the basis of crystal structure and sequence alignment of MetAPs, we have engineered Escherichia coli MetAP by the mutation of three residues, Y168G, M206T, Q233G, in the substrate-binding pocket. Our engineered MetAPs are able to remove the Met from bulky or acidic penultimate residues, such as Met, His, Asp, Asn, Glu, Gln, Leu, Ile, Tyr, and Trp, as well as from small residues. The penultimate residue, the second residue after Met, was further removed if the antepenultimate residue, the third residue after Met, was small. By the coexpression of engineered MetAP in E. coli through the same or a separate vector, we have successfully produced recombinant proteins possessing an innate N terminus, such as onconase, an antitumor ribonuclease from the frog Rana pipiens. The N-terminal pyroglutamate of recombinant onconase is critical for its structural integrity, catalytic activity, and cyto-toxicity. On the basis of N-terminal sequence information in the protein database, 85%-90% of recombinant proteins should be produced in authentic form by our engineered MetAPs.     

Optical Detection of E. coli Bacteria by Mesoporous Silicon Biosensors

A label-free optical biosensor based on a nanostructured porous Si is designed for rapid capture and detection of Escherichia coli K12 bacteria, as a model microorganism. The biosensor relies on direct binding of the target bacteria cells onto its surface, while no pretreatment (e.g. by cell lysis) of the studied sample is required. A mesoporous Si thin film is used as the optical transducer element of the biosensor. Under white light illumination, the porous layer displays well-resolved Fabry-Pérot fringe patterns in its reflectivity spectrum. Applying a fast Fourier transform (FFT) to reflectivity data results in a single peak. Changes in the intensity of the FFT peak are monitored. Thus, target bacteria capture onto the biosensor surface, through antibody-antigen interactions, induces measurable changes in the intensity of the FFT peaks, allowing for a ''real time'' observation of bacteria attachment.The mesoporous Si film, fabricated by an electrochemical anodization process, is conjugated with monoclonal antibodies, specific to the target bacteria. The immobilization, immunoactivity and specificity of the antibodies are confirmed by fluorescent labeling experiments. Once the biosensor is exposed to the target bacteria, the cells are directly captured onto the antibody-modified porous Si surface. These specific capturing events result in intensity changes in the thin-film optical interference spectrum of the biosensor. We demonstrate that these biosensors can detect relatively low bacteria concentrations (detection limit of 10⁴ cells/ml) in less than an hour.     

Glycolipid patterns supported by human serum albumin for E. coli recognition

We demonstrated that human serum albumin (HSA) patterns constructed in a solid substrate by using micro-contact printing (muCP) technique supported the deposition of phospholipid bilayer containing glycolipid, 10-tetradecyloxymethy-3,6,9,12-tetraoxahexacosyl 2-acetamido-2-deoxy-beta-D-glucopyranoside (PB1124). It is observed by confocal laser scanning microscopy (CLSM) that the obtained glycolipid patterns are well-defined, stable and can be used to recognize and immobilize Escherichia coli (E. coli). This strategy is promising to perform bacterial detection through solid surface recognition in a way of biosensors.     

Insights from the molecular characterization of mercury stress proteins identified by proteomics in E.coli nissle 1917

Differently expressed proteins in probiotic Escherichia coli nissle 1917 under mercury stress identified by using a proteomic approach. We applied to separate proteins by using two-dimensional gel electrophoresis and proteins were identified using MALDI-TOF-MS using PMF, by mascot database search using the NCBI database. we identified six proteins after exposure to mercury stress with respect to different functional classes. It is useful to understand the molecular insights into mercury stress in probiotic E. coli. Next we describe a structure generated by homology modelling and functional domain identification; it is interesting to study the impact of stress on protein structures. MS characterization and computational methods together provide the opportunity to examine the impact of stress arising from mercury. The role of these proteins in metal tolerance and structure relation is discussed. To the best of our knowledge, proteomics of E. coli nissle 1917 overview of mercury stress has been reported for the first time.     

A novel method of analyzing proline synonymous codons in E. coli

Proline is a special imino acid in protein and the isomerization of the prolyl peptide bond has notable biological significance and influences the final structure of protein greatly, so the correlation between proline synonymous codon usage and local amino acid, the correlation between proline synonymous codon usage and the isomerization of the prolyl peptide bond were both investigated in the Escherichia coli genome by using a novel method based on information theory. The results show that in peptide chain, the residue at the first position C-terminal influences the usage of proline synonymous codon greatly and proline synonymous codons contain some factors influencing the isomerization of the prolyl peptide bond.     

Rapid label-free detection of E. coli using a novel SPR biosensor containing a fragment of tail protein from phage lambda

Abstract

In efforts to speed up the assessment of microorganisms, researchers have sought to use bacteriophages as a biosensing tool, due to their host-specificity, wide abundance, and safety. However, the lytic cycle of the phage has limited its efficacy as a biosensor. Here, we cloned a fragment of tail protein J from phage lambda and characterized its binding with the host, E. coli K-12, and other microorganism. The N-terminus of J was fused with a His-tag (6HN-J), overexpressed, purified, and characterized using anti-His monoclonal antibodies. The purified protein demonstrated a size of ～38?kDa upon SDS-PAGE and bound with the anti-His monoclonal antibodies. ELISA, dot blot, and TEM data revealed that it specifically bound to E. coli K-12, but not to Pseudomonas aeruginosa. The observed protein binding occurred over a concentration range of 0.01–5?μg/ml and was found to inhibit the in vivo adsorption of phage to host cells. This specific binding was exploited by surface plasmon resonance (SPR) to generate a novel 6HN-J-functionalized SPR biosensor. This biosensor showed rapid label-free detection of E. coli K-12 in the range of 2?×?10⁴ ?2?×?10⁹ CFU/ml, and exhibited a lower detection limit of 2?×?10⁴ CFU/ml.     

Antibiotic resistance of E. coli isolates from urine samples of Urinary Tract Infection (UTI) patients in Pakistan

Drug resistance is becoming alarming with the passage of time worldwide in general and in third world countries in particular. Human urine specimens of patients of urinary tract infection at Sheikh Zayed hospital, Lahore, Pakistan were analyzed for drug resistance in Escherichia coli. A total of 69 Escherichia coli isolates from human urine specimens were obtained and screened for their antibiograms. A total of seven antibiotic resistance profiles were obtained with over 65% of the isolates showing multi-drug resistance. Very high resistance levels were detected against augmentin and gentamicin (87.5 &77.5 % respectively) while imipenem and tazocin recorded the least resistance levels (32.5% and 12.5% respectively) among the isolates.     

Detection of Live Escherichia coli O157:H7 Cells by PMA-qPCR

A unique open reading frame (ORF) Z3276 was identified as a specific genetic marker for E. coli O157:H7. A qPCR assay was developed for detection of E. coli O157:H7 by targeting ORF Z3276. With this assay, we can detect as low as a few copies of the genome of DNA of E. coli O157:H7. The sensitivity and specificity of the assay were confirmed by intensive validation tests with a large number of E. coli O157:H7 strains (n = 369) and non-O157 strains (n = 112). Furthermore, we have combined propidium monoazide (PMA) procedure with the newly developed qPCR protocol for selective detection of live cells from dead cells. Amplification of DNA from PMA-treated dead cells was almost completely inhibited in contrast to virtually unaffected amplification of DNA from PMA-treated live cells. Additionally, the protocol has been modified and adapted to a 96-well plate format for an easy and consistent handling of a large number of samples. This method is expected to have an impact on accurate microbiological and epidemiological monitoring of food safety and environmental source.     

The efficiency of mispaired ligations by lambda integrase is extremely sensitive to context

The integrase protein (Int) of phage lambda is a well-studied representative of the tyrosine recombinase family, whose defining features are two sequential pairs of DNA cleavage/ligation reactions that proceed via a 3' phosphotyrosine covalent intermediate to first form and then resolve a Holliday junction recombination intermediate. We devised an assay that takes advantage of DNA hairpin formation at one Int target site to trap Int cleavages at a different target site, and thereby reveal iterative cycles of cleavage and ligation that would otherwise be undetected. Using this assay and others to compare wild-type Int and a mutant (R169D) defective in forming proper dimer/tetramer interfaces, we found that the efficiency of "bottom-strand" DNA cleavage by wild-type Int, but not R169D, is very sensitive to the base-pair at the "top-strand" cleavage site, seven base-pairs away. We show that this is related to the finding that hairpin formation involving ligation of a mispaired base is much faster for R169D than for wild-type Int, but only in the context of a multimeric complex. During resolution of Holliday junction recombination intermediates, wild-type Int, but not R169D, is very sensitive to homology at the sites of ligation. A long-sought insight from these results is that during Holliday junction resolution the tetrameric Int complex remains intact until after ligation of the product helices has been completed. This contrasts with models in which the second pair of DNA cleavages is a trigger for dissolution of the recombination complex.     

Constitutive versus thermoinducible expression of heterologous proteins in Escherichia coli based on strong PR,PL promoters from phage lambda

Constitutive and thermoinducible expression plasmids based on strong P(R),P(L) promoters from phage lambda were compared for production of TNF-alpha and its analogs under various conditions. Much higher accumulation of TNF was obtained in a constitutive system, so the wider applicability of such systems was studied. In constitutive systems, proteolytically susceptible proteins can be produced easily at low cultivation temperatures and the addition of expensive or toxic chemical inducers is not required. On the other hand, toxic proteins cannot be produced and selection pressure must be strictly maintained to ensure segregational stability of plasmids. Accumulation of TNF-alpha and various analogs at levels up to 25% of total soluble protein was repeatedly achieved, which was 2-3-fold higher than in a thermoinducible system. The stable behavior of the constitutive system in laboratory fermentors was also confirmed. We propose the constitutive system described here as a general model for many currently used expression systems containing strong but not completely repressed promoters. Such systems may be considered as constitutive ones with reduced promoter strengths, but still exhibiting all the intrinsic properties of constitutive expression systems. Although all modern expression systems are inducible, wider use of a constitutive system is evidently possible.     

Orientational control is an efficient control mechanism for phase switching in the E. coli fim system

The fim system in E. coli controls the expression of type-1 fimbriae. These are hair-like structures that can be used to attach to host cells. Fimbriation is controlled by a mechanism called "orientational control." We present two families of models for orientational control to understand the details of how it works. We find that the main benefits of orientational control are that (i) it allows rapid adjustment of fimbriation levels in response to a change of environmental conditions while (ii) keeping the overall frequencies with which a cell switches between the fimbriate state and the afimbriate state low. The main reason for the efficiency of orientational control in regulation of fimbriation levels is that it keeps the system far from its steady state.     

Hydrolysis of the soluble fluorescent molecule carboxyumbelliferyl-beta-D-glucuronide by E. coli beta-glucuronidase as applied in a rugged, in situ optical sensor

Techniques utilizing β-glucuronidase (GUS) activity as an indicator of Escherichia coli (E. coli) presence use labeled glucuronides to produce optical signals. Carboxyumbelliferyl-β-d-glucuronide (CUGlcU) is a fluorescent labeled glucuronide that is soluble and highly fluorescent at natural water pHs and temperatures and, therefore, may be an ideal reagent for use in an in situ optical sensor. This paper reports for the first time the Michaelis-Menten kinetic parameters for the binding of E. coli GUS with CUGlcU as K_m = 910 μM, V_max = 41.0 μM min⁻¹, V_max/K_m 45.0 μmol L⁻¹ min⁻¹, the optimal pH as 6.5 ± 1.0, optimal temperature as 38 °C, and the Gibb's free energy of activation as 61.40 kJ mol⁻¹. Additionally, it was found CUGlcU hydrolysis is not significantly affected by heavy solvents suggesting proton transfer and solvent addition that occur during hydrolysis are not limiting steps. Comparison studies were made with the more common fluorescent molecule methylumbelliferyl-β-d-glucuronide (MUGlcU). Experiments showed GUS preferentially binds to MUGlcU in comparison to CUGlcU. CUGlcU was also demonstrated in a prototype optical sensor for the detection of E. coli. Initial bench testing of the sensor produced detection of low concentrations of E. coli (1.00 × 10³ CFU/100 mL) in 230 ± 15.1 min and high concentrations (1.05 × 10⁵ CFU/100 mL) in 8.00 ± 1.01 min.     

Genome-scale identification of conditionally essential genes in E. coli by DNA microarrays

Identifying the genes required for the growth or viability of an organism under a given condition is an important step toward understanding the roles these genes play in the physiology of the organism. Currently, the combination of global transposon mutagenesis with PCR-based mapping of transposon insertion sites is the most common method for determining conditional gene essentiality. In order to accelerate the detection of essential gene products, here we test the utility and reliability of a DNA microarray technology-based method for the identification of conditionally essential genes of the bacterium, Escherichia coli, grown in rich medium under aerobic or anaerobic growth conditions using two different DNA microarray platforms. Identification and experimental verification of five hypothetical E. coli genes essential for anaerobic growth directly demonstrated the utility of the method. However, the two different DNA microarray platforms yielded largely non-overlapping results after a two standard deviations cutoff and were subjected to high false positive background levels. Thus, further methodological improvements are needed prior to the use of DNA microarrays to reliably identify conditionally essential genes on genome-scale.     

Survival of Escherichia coli under lethal heat stress by L-form conversion

Transition of bacteria to cell wall deficient L-forms in response to stress factors has been assumed as a potential mechanism for survival of microbes under unfavorable conditions. In this article, we provide evidence of paradoxal survival through L-form conversion of E. coli high cell density population after lethal treatments (boiling or autoclaving). Light and transmission electron microscopy demonstrated conversion from classical rod to polymorphic L-form shape morphology and atypical growths of E. coli. Microcrystal formations observed at this stage were interpreted as being closely linked to the processes of L-form conversion and probably involved in the general phenomenon of protection against lethal environment. Identity of the morphologically modified L-forms as E. coli was verified by species specific DNA-based test. Our study might contribute to a better understanding of the L-form phenomenon and its importance for bacterial survival, as well as provoke reexamination of the traditional view of killing strategies against bacteria.     

A structure-based anatomy of the E.coli metabolome

The Escherichia coli metabolome has been characterised using the two-dimensional structures of 745 metabolites, obtained from the EcoCyc and KEGG databases. Physicochemical properties of the metabolome have been calculated to provide an overview of this set of cognate ligands. A library of fragments commonly found among these molecules has been employed to reveal the main constituents of metabolites, and to assist a broad classification of the metabolome into biochemically relevant classes. Fragment-based fingerprints reveal the metabolome as a continuum in the two-dimensional structural space, where clusters of molecules sharing similar scaffolds can be identified, but are generally overlapping. Nucleotide, carbohydrate and amino acid-like molecules are the most prominent, but at high levels of similarity, a more detailed classification is possible. Classification schemes for the metabolome are a promising tool for understanding the chemical diversity of the metabolome. When used in conjunction with existing classifications of the proteome, they can help to elucidate the binding preferences and promiscuity of proteins and their cognate substrates.     

Green Fluorescent Protein-based Expression Screening of Membrane Proteins in Escherichia coli

The production of recombinant membrane proteins for structural and functional studies remains technically challenging due to low levels of expression and the inherent instability of many membrane proteins once solubilized in detergents. A protocol is described that combines ligation independent cloning of membrane proteins as GFP fusions with expression in Escherichia coli detected by GFP fluorescence. This enables the construction and expression screening of multiple membrane protein/variants to identify candidates suitable for further investment of time and effort. The GFP reporter is used in a primary screen of expression by visualizing GFP fluorescence following SDS polyacrylamide gel electrophoresis (SDS-PAGE). Membrane proteins that show both a high expression level with minimum degradation as indicated by the absence of free GFP, are selected for a secondary screen. These constructs are scaled and a total membrane fraction prepared and solubilized in four different detergents. Following ultracentrifugation to remove detergent-insoluble material, lysates are analyzed by fluorescence detection size exclusion chromatography (FSEC). Monitoring the size exclusion profile by GFP fluorescence provides information about the mono-dispersity and integrity of the membrane proteins in different detergents. Protein: detergent combinations that elute with a symmetrical peak with little or no free GFP and minimum aggregation are candidates for subsequent purification. Using the above methodology, the heterologous expression in E. coli of SED (shape, elongation, division, and sporulation) proteins from 47 different species of bacteria was analyzed. These proteins typically have ten transmembrane domains and are essential for cell division. The results show that the production of the SEDs orthologues in E. coli was highly variable with respect to the expression levels and integrity of the GFP fusion proteins. The experiment identified a subset for further investigation.     

Fractionation of soluble proteins in Escherichia coli using DEAE-, SP-, and phenyl sepharose chromatographies.

In an effort to simplify a complex mixture of soluble proteins from Escherichia coli, methods to fractionate the samples prior to two-dimensional (2D) gel electrophoresis were developed. These methods involve the use of DEAE-Sepharose, SP-Sepharose, and phenyl Sepharose chromatographic columns and the fractionation of the protein mixtures based on differential anionic, cationic, and hydrophobic properties of the proteins, respectively. Fractionation of the soluble proteins from an E. coli extract with DEAE-Sepharose resulted in a threefold increase in the number of detectable 2D gel spots. These gel spots were amenable to protein identification by using in-gel trypsin digestions, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, and peptide mass fingerprinting. Significantly, the DEAE-Sepharose column fractionation effectively partitioned the soluble proteins from the cell extracts. Similarly, an SP-Sepharose column was used to fractionate the soluble proteins from E. coli and resulted in over a twofold increase in the number of detectable gel spots. Lastly, fractionation of the cell extract with the phenyl Sepharose column resulted in a threefold increase in the number of detectable 2D gel spots. This work describes an easy, inexpensive way to fractionate the soluble proteins in E. coli and a way to better profile the E. coli proteome.