Evolutionary potential of thermal preference and heat tolerance in Drosophila subobscura

Evolutionary change of thermal traits (i.e., heat tolerance and behavioural thermoregulation) is one of the most important mechanisms exhibited by organisms to respond to global warming. However, the evolutionary potential of heat tolerance, estimated as narrow‐sense heritability, depends on the methodology employed. An alternative adaptive mechanism to buffer extreme temperatures is behavioural thermoregulation, although the association between heat tolerance and thermal preference is not clearly understood. We suspect that methodological effects associated with the duration of heat stress during thermal tolerance assays are responsible for missing this genetic association. To test this hypothesis, we estimated the heritabilities and genetic correlations for thermal traits in Drosophila subobscura, using high‐temperature static and slow ramping assays. We found that heritability for heat tolerance was higher in static assays (h² = 0.134) than in slow ramping assays (h² = 0.084), suggesting that fast assays may provide a more precise estimation of the genetic variation of heat tolerance. In addition, thermal preference exhibited a low heritability (h² = 0.066), suggesting a reduced evolutionary response for this trait. We also found that the different estimates of heat tolerance and thermal preference were not genetically correlated, regardless of how heat tolerance was estimated. In conclusion, our data suggest that these thermal traits can evolve independently in this species. In agreement with previous evidence, these results indicate that methodology may have an important impact on genetic estimates of heat tolerance and that fast assays are more likely to detect the genetic component of heat tolerance.     

Effect of primary hypohydration on physical work capacity

Physical work capacity (PWC₁₈₀) was assessed with different levels of hypohydration in 25 heat-acclimatized male volunteers in hot dry (45°C DB, 30% RH) and hot humid (39°C DB, 60% RH) conditions equated to a heat stress level of 34°C on the WBGT scale. Heat acclimatization was carried out by exposing the subjects for 8 consecutive days in a climatic chamber with moderate work for two 50 min work cycles and 10 min intervening rest pauses. Acclimatization resulted in significant decreases in heart rate (27 bpm), oral temperature (0.8°C), mean skin temperature (1.2°C) and a significant increase in sweating rate (120 g h^–1 m^–2). Day-to-day variations in body hypohydration levels during heat acclimatization were not significantly different, although water intake was found to increase significantly from day 3 onwards when the subjects were in ad lib water intake state. The heat acclimatized subjects were then hypohydrated to varying degrees, viz. 1%, 2% and 3% body weight deficit, with moderate work in heat in the climatic chamber and after successful recovery from the effects of thermal stress and exercise; their physical work capacity was assessed individually. Physical work capacity was found to decrease significantly with hypohydration as compared to controls. The decrease was of the order of 9%, 11% and 22% in the hot dry condition and 6%, 8% and 20% in the hot humid condition with hypohydration levels of 1%, 2% and 3% respectively. The decrease was more pronounced during 3% hypohydration level under both heat stress conditions. This decrease was in spite of significant increases in maximal ventilation. However, the PWC₁₈₀ under the two heat stress conditions, when compared, did not reveal any significant difference. It was concluded that the heat stress vehicle did not adversely affect the physical work capacity. On the other hand, the decreases in physical work capacity were found to be closely related to the primary hypohydration level in heat-acclimatized tropical subjects.Abbreviations WBGT wet bulb globe temperature - bam beats per minute - YSI Yellow Springs Instrument - EKG electrocardiogram     

Deep body and surface temperature responses to hot and cold environments in the zebra finch

Global warming increasingly challenges thermoregulation in endothermic animals, particularly in hot and dry environments where low water availability and high temperature increase the risk of hyperthermia. In birds, un-feathered body parts such as the head and bill work as ‘thermal windows’, because heat flux is higher compared to more insulated body regions. We studied how such structures were used in different thermal environments, and if heat flux properties change with time in a given temperature. We acclimated zebra finches (Taeniopygia guttata) to two different ambient temperatures, ‘cold’ (5 °C) and ‘hot’ (35 °C), and measured the response in core body temperature using a thermometer, and head surface temperature using thermal imaging. Birds in the hot treatment had 10.3 °C higher head temperature than those in the cold treatment. Thermal acclimation also resulted in heat storage in the hot group: core body temperature was 1.1 °C higher in the 35 °C group compared to the 5 °C group. Hence, the thermal gradient from core to shell was 9.03 °C smaller in the hot treatment. Dry heat transfer rate from the head was significantly lower in the hot compared to the cold treatment after four weeks of thermal acclimation. This reflects constraints on changes to peripheral circulation and maximum body temperature. Heat dissipation capacity from the head region increased with acclimation time in the hot treatment, perhaps because angiogenesis was required to reach peak heat transfer rate. We have shown that zebra finches meet high environmental temperature by heat storage, which saves water and energy, and by peripheral vasodilation in the head, which facilitates dry heat loss. These responses will not exclude the need for evaporative cooling, but will lessen the amount of energy expend on body temperature reduction in hot environments.     

Estimating heat flux transmission of vertical greenery ecosystem

Nurturing vegetation on building envelopes provides an innovative and eco-friendly alternative to urban greening especially in compact cities. Whereas the thermal and other benefits of green roofs have been studied intensively, green walls have received scanty attention. This study evaluates the thermodynamic transmission process of the vertical greenery ecosystem. We designed a field experiment to monitor solar radiation and weather conditions, and developed a thermodynamics transmission model to simulate heat flux and temperature variations. The model was calibrated, tested, and proved to be highly efficient. The results show that seasonal global and direct solar radiation drops to minimum in winter in January and February, and reaches maximum in summer in July and August (1168 W m⁻² for global solar radiation and 889 W m⁻² for direct solar radiation). Diffuse solar radiation attains maximum in summer (586 W m⁻²) with moderate rainfall in July and August, and minimum in winter with no rainfall in January and February. Radiation transmission of the green wall strongly correlates with canopy transmittance and reflectance (R² = 0.83). Thermal shielding effectiveness varies with orientation, with the south wall achieving a higher coefficient (0.31) than the north wall. The south wall has lower heat flux absorbance and heat flux loss than the north wall. The south wall can transfer much more heat flux through the vertical greenery ecosystem due to more intensive canopy evapotranspiration effect. The model matches the transmission properties of green wall radiation, and the model simulation fits empirical transmission results.     

Thermal resistance parameters of the air environment at various altitudes

 The thermal properties of atmospheric air surrounding the human body at various altitudes are characterized with a system of parameters. This system comprises resistance of the air to convective heat transfer h _c ^–1, °C (W/m²)⁻¹ and to water vapour transfer h _D ^–1, s/m. The concept of ’evaporative resistance’h _e ^–1, hPa (W/m²)⁻¹) following the similarity of the processes is introduced. In obtaining the altitude dependencies of investigated paramters, a respective heat transfer equation expressing the rate of heat exchange at the boundary body surface – ambient air is applied. The use of the body thermal state of the established altitude dependencies is discussed. The concept of ’thermal stability’ related to the evaporative resistance parameter h _e ^–1 is introduced. This parameter is assumed as: (1) an indicator of the human body thermal stability and (2) distributor and predictor of environmental influence on the body thermal state. Received: 5 January 1996 / Accepted 5 November 1996     

How does Spix's yellow-toothed cavy (Galea spixii Wagler, 1831) face the thermal challenges of the Brazilian tropical dry forest?

The aim of this work was to investigate the thermal biology of the Spix's yellow-toothed cavy (Galea spixii) from the hot and dry environment of the Brazilian Caatinga by infrared thermography and biophysical equations. We monitored the rectal temperature, as well as the non-evaporative (radiative and convective pathways) and evaporative heat exchanges of males and females. The mean rectal temperature of females and males was 37.58 ± 0.02 and 37.47 ± 0.02 °C, respectively. We identified thermal windows by infrared thermography. The surface temperatures and the long-wave radiation heat exchanges were higher in the periocular, preocular, pinnae and vibrissae regions, in that order. The surface temperature of the periocular and preocular regions correlated positively with rectal temperature. Convective heat exchange was insignificant for thermoregulation by G. spixii. Evaporative heat loss increased when the thermal environment inhibited the radiative pathway. Females showed higher evaporative thermolysis than males at times of greater thermal challenge, suggesting a lower tolerance to heat stress. Therefore, infrared thermography identified the thermal windows, which represented the first line of defense against overheating in G. spixii. The periocular and preocular surface temperatures could be used as predictors of the thermal state of G. spixii.     

Herbs in exercise and sports

Background

Central administration of ??-amino butyric acid (GABA) induces lower body temperature in animals in hot ambient air. However, it is still unknown whether oral GABA administration affects temperature regulation at rest in a hot environment in humans. Therefore, in the present study, we specifically hypothesized that systemic administration of GABA in humans would induce hypothermia in a hot environment and that this response would be observed in association with decreased heat production.

Methods

Eight male participants drank a 200-ml sports drink with 1 g of GABA (trial G) or without GABA (trial C), then rested for 30 minutes in a sitting position in a hot environment (ambient air temperature 33°C, relative humidity 50%).

Results

We found that changes in esophageal temperature from before drinking the sports drink were lower in trial G than in trial C (-0.046 ± 0.079°C vs 0.001 ± 0.063°C; P < 0.05), with lower heat production calculated by oxygen consumption (41 ± 5 W/m² vs 47 ± 8 W/m²; P < 0.05).

Conclusions

In this study, we have demonstrated that a single oral administration of GABA induced a larger decrease in body core temperature compared to a control condition during rest in a hot environment and that this response was concomitant with a decrease in total heat production.     

Male-Specific Coliphages as Indicators of Thermal Inactivation of Pathogens in Biosolids

Male-specific (F⁺) coliphages have been proposed as a candidate indicator of fecal contamination and of virus reduction in waste treatment. However, in this and earlier work with a laboratory thermophilic anaerobic digester, a heat-resistant fraction of F⁺ coliphage populations indigenous to municipal wastewater and sludge was evident. We therefore isolated coliphages from municipal wastewater sludge and from biosolid samples after thermophilic anaerobic digestion to evaluate the susceptibility of specific groups to thermal inactivation. Similar numbers of F⁺ DNA and F⁺ RNA coliphages were found in untreated sludge, but the majority of isolates in digested biosolids were group I F⁺ RNA phages. Separate experiments on individual isolates at 53°C confirmed the apparent heat resistance of group I F⁺ RNA coliphages as well as the susceptibility of group III F⁺ RNA coliphages. Although few F⁺ DNA coliphages were recovered from the treated biosolid samples, thermal inactivation experiments indicated heat resistance similar to that of group I F⁺ RNA phages. Hence, F⁺ DNA coliphage reductions during thermophilic anaerobic digestion are probably related to mechanisms other than thermal inactivation. Further studies should focus on the group III F⁺ RNA coliphages as potential indicators of reductions of heat-resistant pathogens in thermal processes for sludge treatment.     

Estimation of cardiac output and stroke volume from thermal equilibration and heartbeat rates in fish

Cardiac output and stroke volume were estimated for a 200 g largemouth blackbass (Micropterus salmoides) by a modified whole-body thermodilution method using the relation between thermal equilibration rates and heartbeat frequencies. The reciprocal of the thermal time constant, k (min^–1), was related to the heartbeat frequency, F (beats min^–1), by the equation k=0.00146 F + 0.309; the slope is the weight-specific stroke volume (ml g^–1) and the intercept is the weight-specific heat transfer constant (cal °C^–1 min^–1 g^–1). Stroke volume was 0.292 ml (0.00146 ml/g body weight), yielding cardiac output values ranging from 44 ml kg^–1 min^–1 (at 30 beats min) to 158 ml kg^–1 min^–1 (at 108 beats min^–1), or 4.4 to 15.8% of body weight. Active (convective) heat transfer due to blood flow constituted an estimated 11 to 34% (mean 22.5%) of total heat transfer, depending on heartbeat frequency; this variability constitutes physiological thermoregulation.     

A comparison of galvanic skin conductance and skin wettedness as indicators of thermal discomfort during moderate and high metabolic rates

The relationship between local thermal comfort, local skin wettedness (w_local) and local galvanic skin conductance (GSC) in four body segments during two different exercise intensities was compared in 10 males. In a balanced order, participants walked at 35% VO_2max for 45 min (WALK) (29.0±1.9°C, 29.8±3.6% RH, no wind) in one test and in a separate test ran at 70% VO_2max for 45 min (RUN) (26.2±2.1°C, 31.1±7.0% RH, no wind). During both tests, participants wore a loose fitting 100% polyester long sleeve top and trouser ensemble with a low resistance to heat and vapour transfer (total thermal resistance of 0.154 m² K W⁻¹ and total water vapour resistance of 35.9 m² Pa W⁻¹). w_local, change from baseline in GSC (ΔGSC) and local thermal comfort were recorded every 5 min. The results suggest that both w_local and ΔGSC are strong predictors of thermal comfort during the WALK when sweat production is low and thermal discomfort minimal (r²>0.78 and r²>0.71, respectively). Interestingly, during the RUN w_local plateaued at ~0.6 to 0.8 due to the high sweat production, whilst ΔGSC gradually increased throughout the experiment. ΔGSC had a similar relationship with thermal comfort to w_local during the RUN (r²>0.95 and r²>0.94, respectively). Despite the strength of these relationships, the ability of w_local to predict local thermal comfort accurately dramatically reduces in the exponential part of the curve. In a situation of uncompensated heat stress such as high metabolic rate in hot climate, where sweat production is high, ΔGSC shows to be a better predictor of local thermal comfort than w_local. The w_local data shows regional differences in the threshold which triggers local discomfort during the WALK than RUN; lower values are found for upper arms (0.22±0.03 and 0.28 ±0.22) and upper legs (0.22±0.11 and 0.22±0.10), higher values for upper back (0.30±0.12 and 0.36 ±0.10) and chest (0.27±0.10 and 0.39 ±0.32), respectively. However, no regional differences in the threshold of discomfort are found in the ?GSC data. Instead, the data suggests that the degree of discomfort experienced appears to be related to the amount of sweat within and around the skin (as indirectly measured by ΔGSC) at each body site.     

Thermoregulatory responses during exercise and a hot water immersion and the affective responses to peripheral thermal stimuli

Tympanic (Tty), mean skin (¯Tsk) and mean body (¯Tb) temperatures and heart rate (HR) increased more in low Vo₂ max group (LG) than in high Vo₂ max group (HG) during exercise. The regression coefficient of body temperatures (Tty and ¯Tb) on HR and the increased rate of heat storage were larger in LG than in HG during exercise. The local sweat rate (per min/cm²) during a hot water bath exhibited a considerable large quantity in comparison with the amount during exercise. Internal and skin temperatures during a hot water bath increased more immediately than those during exercise. The levels of comfort sensation during the preovulatory phase in women and pre-exercise period in men were higher at 40C than at 20C as peripheral thermal stimulus. The levels during the postovulatory and post-exercise phases in the same subjects were higher with the cool stimuli than with the warm stimuli. Above results suggest that thermoregulatory responses during submaximal exercise are different according to physical fitness and that these responses are different from those during hot water immersion. In addition, these suggest that the scores of thermal sensation with warm and cool stimuli are different during the pre- and post-ovulatory phases and the pre- and post-exercise periods.     

Respiration and heat production by the inflorescence of Philodendron selloum Koch

During a 2-d sequence of anthesis, the spadices of the thermogenic arum lily, Philodendron selloum, regulated maximum temperature within a small range (37–44°C) by reversible thermal inhibition of respiratory heat production. This response protects the inflorescence and the attracted insects from thermal damage. Heat production by whole spadices, measured by O₂ respirometry, equalled heat loss, measured by gradient layer calorimetry, which confirmed the heat equivalence of O₂ consumption (20.4 J ml^-1). This also indicated that there was no net phosphorylation during thermogenesis, heat production being the primary function of high rates of respiration. The sterile male florets consumed about 30 ml g^-1 h^-1 and the average 124-g spadix produced about 7 W to maintain a 30°C difference between spadix and ambient temperature. Most of the energy for thermogenesis is present in the florets before anthesis. Despite high respiratory rates, thermogenesis is an energetically inexpensive component of the reproductive process.     

Autolytic Enzyme System of Clostridium botulinum

Isolated cell walls of Clostridium botulinum type A strain 190L released an autolysin during autolysis of the cell walls. The autolysin was isolated from the cell walls, and partially purified 18.6-fold by ammonium sulfate precipitation, chromatography on DEAE-cellulose and gel filtration through Sephadex G-100. The purified preparation of the autolysin showed 2 major and 2 minor protein bands on Polyacrylamide gel electrophoresis. Some properties of the autolysin were examined using SDS-treated cell walls of the organisms as a substrate. The autolysin was active over a pH range of 6 to 8, with a maximum near pH 6.8. The lytic activity was stimulated by 10^?4 M each of Co⁺⁺, Mg⁺⁺ and Ca⁺⁺ in the order, whereas it was inhibited markedly by Cu⁺⁺. Mercaptoethanol (10^?4–10^?3 M) significantly activated the lytic action. Trypsin and nagarse (10 μg/ml) also stimulated the lytic activity. The lytic spectrum of the autolysin toward the SDS-treated cell walls obtained from various types of C. botulinum and C. perfringens indicated a relatively high specificity. After treatment with hot formamide the cell walls of C. botulinum increased in susceptibility to the autolysin.     

Ebola Response: Modeling the Risk of Heat Stress from Personal Protective Clothing

Introduction

A significant number of healthcare workers have responded to aid in the relief and containment of the 2013 Ebola virus disease (EVD) outbreak in West Africa. Healthcare workers are required to wear personal protective clothing (PPC) to impede the transmission of the virus; however, the impermeable design and the hot humid environment lead to risk of heat stress.

Objective

Provide healthcare workers quantitative modeling and analysis to aid in the prevention of heat stress while wearing PPC in West Africa.

Methods

A sweating thermal manikin was used to measure the thermal (R_ct) and evaporative resistance (R_et) of the five currently used levels of PPC for healthcare workers in the West Africa EVD response. Mathematical methods of predicting the rise in core body temperature (T_c) in response to clothing, activity, and environment was used to simulate different responses to PPC levels, individual body sizes, and two hot humid conditions: morning/evening (air temperature: 25°C, relative humidity: 40%, mean radiant temperature: 35°C, wind velocity: 1 m/s) and mid-day (30°C, 60%, 70°C, 1 m/s).

Results

Nearly still air (0.4 m/s) measures of R_ct ranged from 0.18 to 0.26 m² K/W and R_et ranged from 25.53 to 340.26 m² Pa/W.

Conclusion

Biophysical assessments and modeling in this study provide quantitative guidance for prevention of heat stress of healthcare workers wearing PPC responding to the EVD outbreak in West Africa.     

The performance of outdoor plants in living walls under hot and humid conditions

The use of living walls has been increasing around the world due to their several benefits. However, studies of suitable plant species for living walls, particularly in extreme climates, are quite limited. This study examines the performance of 12 plant species used in two living wall systems: a felt-pocket and a planter in a tropical climate in Thailand. All plants were monitored across wet and cold seasons for plant height, visual quality, thermal performance, and carbon sequestration. The findings show variations in plant performances across the 12 plant species. Increases in plant growth were observed for all plants except for herbaceous and succulent plants, which were less tolerant to wet conditions. Smaller plant increments resulted in poorer thermal properties and less potential for carbon sequestration. The planter system had a higher amount of carbon contents than the felt-pocket system due to its higher plant density. Over 6 months, living wall systems sequestered carbon, with averages of 48.2 g C·m^?2 for the felt-pocket system and 166.7 g C·m^?2 for the planter system.

     

Determination of thermal properties of composting bulking materials

Thermal properties of compost bulking materials affect temperature and biodegradation during the composting process. Well determined thermal properties of compost feedstocks will therefore contribute to practical thermodynamic approaches. Thermal conductivity, thermal diffusivity, and volumetric heat capacity of 12 compost bulking materials were determined in this study. Thermal properties were determined at varying bulk densities (1, 1.3, 1.7, 2.5, and 5 times uncompacted bulk density), particle sizes (ground and bulk), and water contents (0, 20, 50, 80% of water holding capacity and saturated condition). For the water content at 80% of water holding capacity, saw dust, soil compost blend, beef manure, and turkey litter showed the highest thermal conductivity (K) and volumetric heat capacity (C) (K: 0.12–0.81 W/m °C and C: 1.36–4.08 MJ/m³ °C). Silage showed medium values at the same water content (K: 0.09–0.47 W/m °C and C: 0.93–3.09 MJ/m³ °C). Wheat straw, oat straw, soybean straw, cornstalks, alfalfa hay, and wood shavings produced the lowest K and C values (K: 0.03–0.30 W/m °C and C: 0.26–3.45 MJ/m³ °C). Thermal conductivity and volumetric heat capacity showed a linear relationship with moisture content and bulk density, while thermal diffusivity showed a nonlinear relationship. Since the water, air, and solid materials have their own specific thermal property values, thermal properties of compost bulking materials vary with the rate of those three components by changing water content, bulk density, and particle size. The degree of saturation was used to represent the interaction between volumes of water, air, and solids under the various combinations of moisture content, bulk density, and particle size. The first order regression models developed in this paper represent the relationship between degree of saturation and volumetric heat capacity (r = 0.95–0.99) and thermal conductivity (r = 0.84–0.99) well. Improved knowledge of the thermal properties of compost bulking materials can contribute to improved thermodynamic modeling and heat management of composting processes.     

Physiological effects of heat and cold exposure in the common reef coral Acropora millepora

Reef-forming corals are under threat globally from climate change, leading to changes in sea temperatures with both hot and cold events recorded and projected to increase in frequency and severity in the future. Tolerance to heat and cold exposure has been found to be mutually exclusive in other marine invertebrates, but it is currently unclear whether a trade-off exists between hot and cold thermal tolerance in tropical corals. This study quantified the changes in physiology in Acropora millepora from the central Great Barrier Reef subjected to three temperature treatments; sub-lethal cold, ambient and sub-lethal heat (23.0 °C, 27.0 °C and 29.5 °C, respectively). After 10 weeks, pigment content and Symbiodiniaceae density increased in cold-treated corals but decreased in heat-treated corals relative to corals at ambient conditions. Heat-treated corals gained less mass relative to both ambient and cold-treated corals. These results indicate that the physiological condition of A. millepora corals examined here improved in response to mild cold exposure compared to ambient exposure and decreased under mild heat exposure despite both these temperatures occurring in situ around 15% of the year. The energetic condition of corals in the hotter treatment was reduced compared to both ambient and cooler groups, indicating that corals may be more resilient to mild cold exposure relative to mild heat exposure. The results indicate that the corals shifted their resource allocation in response to temperature treatment, investing more energy into skeletal extension rather than maintenance. No evidence of thermal tolerance trade-offs was found, and cold thermal tolerance was not lost in more heat-tolerant individuals. An enhanced understanding of physiological responses of corals at both ends of the thermal spectrum is important for predicting the resilience of corals under projected climate change conditions.

     

Assessment of Microbial Fouling in an Ocean Thermal Energy Conversion Experiment

A project to investigate biofouling, under conditions relevant to ocean thermal energy conversion heat exchangers, was conducted during July through September 1977 at a site about 13 km north of St. Croix (U.S. Virgin Islands). Seawater was drawn from a depth of 20 m, within the surface mixed layer, through aluminum pipes (2.6 m long, 2.5-cm internal diameter) at flow velocities of about 0.9 and 1.8 m/s. The temperature of the seawater entering the mock heat exchanger units was between 27.8 and 28.6°C. After about 10 weeks of exposure to seawater, when their thermal conductivity was reported to be significantly impaired, the pipes were assayed for the accumulation of biological material on their inner surfaces. The extent of biofouling was very low and independent of flow velocity. Bacterial populations, determined from plate counts, were about 10⁷ cells per cm². The ranges of mean areal densities for other biological components were: organic carbon, 18 to 27 μg/cm²; organic nitrogen, 1.5 to 3.0 μg/cm²; adenosine 5′-triphosphate, 4 to 28 ng/cm²; carbohydrate (as glucose in the phenol assay), 3.8 to 7.0 μg/cm²; chlorophyll a, 0.2 to 0.8 ng/cm². It was estimated from the adenosine 5′-triphosphate and nitrogen contents that the layer of live bacteria present after 10 weeks was only of the order of 1μm thick. The C/N ratio of the biological material suggested the presence of extracellular polysaccharidic material. Such compounds, because of their water-retaining capacities, could account for the related increase in thermal resistance associated with the pipes. This possibility merits further investigation, but the current results emphasize the minor degree of biofouling which is likely to be permissible in ocean thermal energy conversion heat exchangers.     

Anaerobic transformation of carbon monoxide by microbial communities of Kamchatka hot springs

Carbon monoxide (CO) is one of the common gaseous compounds found in hot volcanic environments. It is known to serve as the growth substrate for a number of thermophilic prokaryotes, both aerobic and anaerobic. The goal of this work was to study the process of anaerobic transformation of CO by microbial communities inhabiting natural thermal environments: hot springs of Uzon Caldera, Kamchatka. The anaerobic microbial community of Treshchinny Spring (80°C, pH 6.5) was found to exhibit two peaks of affinity for CO (K _S1 = 54 nM and K _S2 = 1 μM). The actual rate of anaerobic CO transformation by the microbial community of this spring, calculated after obtaining the concentration dependence curve and extrapolated to the natural concentration of CO dissolved in the hot spring water (20 nM), was found to be 120 μmol l⁻¹ of sediment day⁻¹. In all the hot springs studied, more than 90% of the carbon of ¹⁴CO upon anaerobic incubation was recovered as ¹⁴CO₂. From 1 to 5% of ¹⁴CO was transformed to volatile fatty acids (VFA). The number of microorganisms capable of anaerobic CO oxidation determined by dilution-to-extinction method reached 10⁶ cells ml⁻¹ of sediment. CO-transforming anaerobic thermophilic microorganisms isolated from the springs under study exhibited hydrogenogenic type of CO oxidation and belonged to the bacterial genera Carboxydocella and Dictyoglomus. These data suggest a significant role of hydrogenogenic carboxydotrophic prokaryotes in anaerobic CO transformation in Uzon Caldera hot springs.     

Remodelling of arabinoxylan in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis>) endosperm cell walls during grain filling

Previous studies using spectroscopic imaging have allowed the spatial distribution of structural components in wheat endosperm cell walls to be determined. FT-IR microspectroscopy showed differing changes in arabinoxylan (AX) structure, during grain development under cool/wet and hot/dry growing conditions, for differing cultivars (Toole et al. in Planta 225:1393–1403, 2007). These studies have been extended using Raman microspectroscopy, providing more details of the impact of environment on the polysaccharide and phenolic components of the cell walls. NMR studies provide complementary information on the types and levels of AX branching both early in development and at maturity. Raman microspectroscopy has allowed the arabinose:xylose (A/X) ratio in the cell wall AX to be determined, and the addition of ferulic acid and related phenolic acids to be followed. The changes in the A/X ratio during grain development were affected by the environmental conditions, with the A/X ratio generally being slightly lower for samples grown under cool/wet conditions than for those from hot/dry conditions. The degree of esterification of the endosperm cell walls with ferulic acid was also affected by the environment, being lower under hot/dry conditions. The results support earlier suggestions that AX is either delivered to the cell wall in a highly substituted form and is remodelled through the action of arabinoxylan arabinofuranohydrolases or arabinofuranosidases, or that low level substituted AX are incorporated into the wall late in cell wall development, reducing the average degree of substitution, and that the rate of this remodelling is influenced by the environment. ¹H NMR provided a unique insight into the chemical structure of intact wheat endosperm cell walls, providing qualitative information on the proportions of mono- and disubstituted AX and the levels of branching of adjacent units. The A/X ratio did not change greatly with either the development stage or the growth conditions, but the ratio of mono- to disubstituted Xylp residues increased markedly (by about fourfold) in the more mature samples, confirming the changes in branching levels determined using FT-IR. To the best of our knowledge, this is the first time that intact endosperm cell walls have been studied by ¹H NMR.