Identification of a T-cell epitope adjacent to neutralization antigenic site 1 of poliovirus type 1.

Proliferative T-cell responses to poliovirus in various strains of mice have been analyzed by using either killed purified virus or capsid protein VP1 synthetic peptides. Following immunization of mice with inactivated poliovirus type 1 (PV1), a specific proliferative response of their lymph node CD4+ T cells was obtained after in vitro stimulation with purified virus. In mice immunized with PV1, PV2, or PV3, a strong cross-reactivity of the T-cell responses was observed after in vitro stimulation with heterologous viruses. By using various strategies, a dominant T-cell epitope was identified in the amino acid 103 to 115 region of capsid polypeptide VP1, close by the C3 neutralization epitope. The T-cell response to VP1 amino acids 103 to 115 is H-2 restricted: H-2d mice are responders, whereas H-2k and H-2b mice do not respond to this T-cell epitope. Immunization of BALB/c (H-2d) mice with the uncoupled p86-115 peptide, which represents VP1 amino acids 86 to 115 and contains both the T-cell epitope and the C3 neutralization epitope, induced poliovirus-specific B- and T-cell responses. Moreover, these mice developed poliovirus neutralizing antibodies.     

Identification of a new neutralization antigenic site on poliovirus coat protein VP2

Major neutralization antigenic sites have been previously mapped by us on VP1, the largest capsid protein of poliovirus type 1. Here we report the first identification of the primary sequence of a neutralization antigenic site on capsid protein VP2. Inspection of the amino acid sequence of VP2 led to the selection and synthesis of a peptide (n = 12) that, after linking to a carrier protein, induced an antiviral neutralizing antibody response in rabbits. The response was augmented by a single subsequent inoculation of intact virus; thus, the peptide was also capable of priming the production of neutralizing antibodies. These antibodies were directed only against the site specified by the synthetic peptide. Although the VP2-specific neutralization antigenic site appears not to be strongly immunogenic in the intact virion, it can nevertheless contribute to neutralization of poliovirus. This observation may be important for the development of peptide vaccines.     

脊髓灰质炎病毒合成肽的免疫诱导作用

 本文报道了模拟脊髓灰质类Ⅰ型病毒Mahoney株外壳蛋白的氨基酸顺序,用化学方法合成了位于VP1 70～75、95～102、93～103、70～75+93～103和VP 3132～143的五段肽。合成的肽段与载体蛋白偶联后免疫家兎能产生明显的免疫记忆作用。结果表明这些合成肽均能被脊髓灰质炎多克隆抗血清所识别,具有一定的免疫原性。     

Nuclear localization of poliovirus capsid polypeptide VP1 expressed as a fusion protein with SV40-VP1

The poliovirus cDNA fragment coding for capsid polypeptide VP1 was inserted between the EcoRI and BamHI sites of SV40 DNA, generating a chimaeric gene in which the sequence of the 302 amino acids (aa) of poliovirus capsid polypeptide VP1 was placed downstream from that of the 94 N-terminal aa of SV40 capsid polypeptide VP1. The resulting defective, hybrid virus, SV40-delta 1 polio, was propagated in CV1 cells using an early SV40 mutant, am404, as a helper. Cells doubly infected by SV40-delta 1 polio and am404 expressed a 50-kDal fusion protein which was specifically immunoprecipitated by polyclonal and/or monoclonal antibodies raised against poliovirus capsids or against poliovirus polypeptide VP1. Examination of the infected cells by immunofluorescence after staining with anti-poliovirus VP1 immune sera revealed that the fusion protein was mostly located in the intra- and perinuclear space of the cells, in contrast to the exclusively intracytoplasmic location of genuine poliovirus VP1 polypeptide that was observed in poliovirus-infected cells. This suggests that the N-terminal part of the SV40-VP1 polypeptide could contain an important sequence element acting as a migration signal for the transport of proteins from the cytoplasm to the nucleus.     

Structure of the hepatitis A virion: peptide mapping of the capsid region.

Milligram amounts of highly purified hepatitis A virus (HAV) were obtained from persistently infected cell cultures. The HAV polypeptides were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and transferred to nitrocellulose for detection by an enzyme-linked immunotransfer blot procedure. The HAV nucleotide-derived amino acid sequence was subjected to computer analysis to identify potential immunogenic regions within the HAV capsid polypeptides. Synthetic peptides corresponding to selected regions of each of the larger putative capsid polypeptides were coupled to keyhole limpet hemocyanin and used to immunize rabbits. Four of six anti-HAV peptide sera were strongly reactive. Antipeptide serum generated against amino acids (a.a.) 75 through 82 reacted with the 27,000-molecular-weight (MW) polypeptide; serum against a.a. 279 through 285 reacted with the 29,000-MW HAV polypeptide; and sera against a.a. 591 through 602 and 606 through 618 reacted with the 33,000-MW HAV polypeptide. These reactions enabled the identification of the gene order of the larger HAV P1 region gene products. Our data indicate the following molecular weights: HAV VP2 or 1B, 27,000; HAV VP3 or 1C, 29,000; and HAV VP1 or 1D, 33,000.     

Evidence for a complex structure of neutralization antigenic site I of poliovirus type 1 Mahoney

We have selected neutralization escape mutants by using a monoclonal antibody (nt-MAb) against a sequential epitope between amino acids 93 through 104 (neutralization antigenic site I) of poliovirus type 1 Mahoney. The majority of mutants were also resistant against five strain-specific nt-MAbs which recognized conformation-dependent epitopes, suggesting that the neutralization antigenic site I must be involved in the formation of such epitopes. An analysis of all mutants by the binding of nt-MAbs and by isoelectric focusing of VP1 allowed discrimination of five classes of mutants. Sequence analysis of mutant RNAs revealed point mutations and deletions in the antibody-binding site.     

Molecular basis for linkage of a continuous and discontinuous neutralization epitope on the structural polypeptide VP2 of poliovirus type 1.

We obtained neutralizing monoclonal antibodies against a continuous neutralization epitope on VP2 of poliovirus type 1 strain Mahoney by using a combined in vivo-in vitro immunization procedure. The antibody-binding site was mapped to amino acid residues within the peptide segment (residues 164 through 170) of VP2 by competition with synthetic peptide and sequencing of resistant mutants. Cross-neutralization of these mutants with another neutralizing monoclonal antibody revealed a linkage of the continuous epitope and a discontinuous neutralization epitope involving both loops of the double-loop structure of VP2 at the twofold axis on the surface of the virion.     

A domain of SV40 capsid polypeptide VP1 that specifies migration into the cell nucleus.

In order to identify the determinants responsible for the nuclear migration of simian virus 40 (SV40) polypeptide VP1, the 5'-terminal portion of the SV40 VP1 gene was fused with the complete cDNA sequence of poliovirus capsid polypeptide VP1 and the hybrid gene was inserted into an SV40 vector in place of the normal SV40 VP1 gene. Deletions of various length were generated in the SV40 VP1 portion of the hybrid gene, resulting in a set of truncated genes encoding 2-40 NH2-terminal amino acids from SV40 VP1, followed by poliovirus VP1. Monkey kidney cells were infected by the deleted hybrid viruses in the presence of an early SV40 amber mutant as helper, and the subcellular localization of the fusion proteins was determined by indirect immunofluorescence using an anti-poliovirus VP1 immune serum. The presence of the first 11 NH2-terminal amino acids from SV40 VP1 was found to be sufficient to target the fusion protein to the cell nucleus. Deletions extending from the NH2- towards the COOH-terminal end of the protein were next generated. Transport of the SV40 VP1-poliovirus VP1 fusion polypeptide to the nucleus was abolished when the first eight amino acids from SV40 VP1 were deleted. Thus the sequence of the first eight NH2-terminal amino acids of SV40 VP1 appears to contain a nuclear migration signal which is sufficient to target the protein to the cell nucleus.     

Myristylation of poliovirus capsid precursor P1 is required for assembly of subviral particles.

The poliovirus capsid precursor polyprotein, P1, is cotranslationally modified by the addition of myristic acid. We have examined the importance of myristylation of the P1 capsid precursor during the poliovirus assembly process by using a recently described recombinant vaccinia virus expression system which allows the independent production of the poliovirus P1 protein and the poliovirus 3CD proteinase (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991). We constructed a site-directed mutation in the poliovirus cDNA encoding an alanine at the second amino acid position of P1 in place of the glycine residue required for the myristic acid addition and isolated a recombinant vaccinia virus (VVP1myr-) that expressed a nonmyristylated form of the P1 capsid precursor. The 3CD proteinase expressed by a coinfecting vaccinia virus, VVP3, proteolytically processed the nonmyristylated precursor P1 expressed by VVP1myr-. However, the processed capsid proteins, VP0, VP3, and VP1, did not assemble into 14S or 75S subviral particles, in contrast to the VP0, VP3, and VP1 proteins derived from the myristylated P1 precursor. When cells were coinfected with VVP1myr- and poliovirus type 1, the nonmyristylated P1 precursor expressed by VVP1myr- was processed by 3CD expressed by poliovirus, and the nonmyristylated VP0-VP3-VP1 (VP0-3-1) protomers were incorporated into capsid particles and virions which sedimented through a 30% sucrose cushion. Thus, the nonmyristylated P1 precursor and VP0-3-1 protomers were not excluded from sites of virion assembly, and the assembly defects observed for the nonmyristylated protomers were overcome in the presence of myristylated capsid protomers expressed by poliovirus. We conclude that myristylation of the poliovirus P1 capsid precursor plays an important role during poliovirus assembly by facilitating the appropriate interactions required between 5S protomer subunits to form stable 14S pentamers. The results of these studies demonstrate that the independent expression of the poliovirus P1 and 3CD proteins by using recombinant vaccinia viruses provides a unique experimental tool for analyzing the dynamics of the poliovirus assembly process.     

Antigenic sequences of poliovirus recognized by T cells: serotype-specific epitopes on VP1 and VP3 and cross-reactive epitopes on VP4 defined by using CD4+ T-cell clones.

A panel of poliovirus-specific murine CD4+ T-cell clones has been established from both BALB/c (H-2d) and CBA (H-2k) mice immunized with Sabin vaccine strains of poliovirus serotype 1, 2, or 3. T-cell clones were found to be either serotype specific or cross-reactive between two or all three serotypes. Specificity analysis against purified poliovirus proteins demonstrated that T-cell clones recognized determinants on the surface capsid proteins VP1, VP2, and VP3 and the internal capsid protein VP4. Panels of overlapping synthetic peptides were used to identify eight distinct T-cell epitopes. One type 3-specific T-cell clone recognized an epitope within amino acids 257 and 264 of VP1. Three T-cell epitopes corresponding to residues 14 to 28, 189 to 203, and 196 to 210 were identified on VP3 of poliovirus type 2. The remaining four T-cell epitopes were mapped to an immunodominant region of VP4, encompassed within residues 6 and 35 and recognized by both H-2d and H-2k mice. The epitopes on VP4 were conserved between serotypes, and this may account for the predominantly cross-reactive poliovirus-specific T-cell response observed with polyclonal T-cell populations. In contrast, T-cell clones that recognize epitopes on VP1 or VP3 were largely serotype specific; single or multiple amino acid substitutions were found to be critical for T-cell recognition.     

Poliovirus Sabin type 1 neutralization epitopes recognized by immunoglobulin A monoclonal antibodies.

Immunity to poliomyelitis is largely dependent on humoral neutralizing antibodies, both after natural (wild virus or vaccine) infection and after inactivated poliovirus vaccine inoculation. Although the production of local secretory immunoglobulin A (IgA) antibody in the gut mucosa may play a major role in protection, most of information about the antigenic determinants involved in neutralization of polioviruses derives from studies conducted with humoral monoclonal antibodies (MAbs) generated from parenterally immunized mice. To investigate the specificity of the mucosal immune response to the virus, we have produced a library of IgA MAbs directed at Sabin type 1 poliovirus by oral immunization of mice with live virus in combination with cholera toxin. The epitopes recognized by 13 neutralizing MAbs were characterized by generating neutralization-escape virus mutants. Cross-neutralization analysis of viral mutants with MAbs allowed these epitopes to be divided into four groups of reactivity. To determine the epitope specificity of MAbs, virus variants were sequenced and the mutations responsible for resistance to the antibodies were located. Eight neutralizing MAbs were found to be directed at neutralization site N-AgIII in capsid protein VP3; four more MAbs recognized site N-AgII in VP1 or VP2. One IgA MAb selected a virus variant which presented a unique mutation at amino acid 138 in VP2, not previously described. This site appears to be partially related with site N-AgII and is located in a loop region facing the VP2 N-Ag-II loop around residue 164. Only 2 of 13 MAbs proved able to neutralize the wild-type Mahoney strain of poliovirus. The IgA antibodies studied were found to be produced in the dimeric form needed for recognition by the polyimmunoglobulin receptor mediating secretory antibody transport at the mucosal level.     

Identification of the region including the epitope for a monoclonal antibody which can neutralize human parvovirus B19.

In this study, we identified a region in the human parvovirus structural protein which involves the neutralization of the virus by a monoclonal antibody and site-specific synthetic peptides. A newly established monoclonal antibody reacted with both viral capsid proteins VP1 and VP2. The epitope was found in six strains of independently isolated human parvovirus B19. The monoclonal antibody could protect colony-forming unit erythroid in human bone marrow cell culture from injury by the virus. The monoclonal antibody reacted with only 1 of 12 peptides that were synthesized according to a predicted amino acid sequence based on nucleotide sequences of the coding region for the structural protein of B19 virus. The sequence recognized by the antibody was a site corresponding to amino acids 328 to 344 from the amino-terminal portion of VP2. This evidence suggests that the epitope of the viral capsid protein is located on the surface of the virus and may be recognized by virus-neutralizing antibodies.     

Mutations conferring resistance to neutralization with monoclonal antibodies in type 1 poliovirus can be located outside or inside the antibody-binding site.

Antigenic variants resistant to eight neutralizing monoclonal antibodies were selected from wild (Mahoney) and attenuated (Sabin) type 1 infectious poliovirions. Cross-immunoprecipitation revealed interrelationships between epitopes which were not detected by cross-neutralization. Operational analysis of antigenic variants showed that seven of eight neutralization epitopes studied were interrelated. Only one neutralization epitope, named Kc, varied independently from all the others. This latter, recognized by C3 neutralizing monoclonal antibody, was present not only on infectious virions but also on heat-denatured (C-antigenic) particles and on isolated capsid protein VP1. Loss of the neutralization function of an epitope did not necessary result from the loss of its antibody-binding capacity. Such potential, but not functional, neutralization epitopes exist naturally on Mahoney and Sabin 1 viruses. Their antibody-binding property could be disrupted by isolating antigenic variants in the presence of the nonneutralizing monoclonal antibody and anti-mouse immunoglobulin antibodies. Single-point mutations responsible for the acquisition of resistance to neutralization in the antigenic variants were located by sequence analyses of their genomes. Mutants selected in the presence of C3 neutralizing monoclonal antibody always had the mutation located inside the antibody-binding site (residues 93 through 103 of VP1) at the amino acid position 100 of VP1. On the contrary, antigenic variants selected in the presence of neutralizing monoclonal antibodies reacting only with D-antigenic particles had mutations situated in VP3, outside the antibody-binding site (residues 93 through 103 of VP1). The complete conversion of the Mahoney to the Sabin 1 epitope map resulted from a threonine-to-lysine substitution at position 60 of VP3.     

Encapsidation of poliovirus replicons encoding the complete human immunodeficiency virus type 1 gag gene by using a complementation system which provides the P1 capsid protein in trans.

Poliovirus genomes which contain small regions of the human immunodeficiency virus type 1 (HIV-1) gag, pol, and env genes substituted in frame for the P1 capsid region replicate and express HIV-1 proteins as fusion proteins with the P1 capsid precursor protein upon transfection into cells (W. S. Choi, R. Pal-Ghosh, and C. D. Morrow, J. Virol. 65:2875-2883, 1991). Since these genomes, referred to as replicons, do not express capsid proteins, a complementation system was developed to encapsidate the genomes by providing P1 capsid proteins in trans from a recombinant vaccinia virus, VV-P1. Virus stocks of encapsidated replicons were generated after serial passage of the replicon genomes into cells previously infected with VV-P1 (D. C. Porter, D. C. Ansardi, W. S. Choi, and C. D. Morrow, J. Virol. 67:3712-3719, 1993). Using this system, we have further defined the role of the P1 region in viral protein expression and RNA encapsidation. In the present study, we constructed poliovirus replicons which contain the complete 1,492-bp gag gene of HIV-1 substituted for the entire P1 region of poliovirus. To investigate whether the VP4 coding region was required for the replication and encapsidation of poliovirus RNA, a second replicon in which the complete gag gene was substituted for the VP2, VP3, and VP1 capsid sequences was constructed. Transfection of replicon RNA with and without the VP4 coding region into cells resulted in similar levels of expression of the HIV-1 Gag protein and poliovirus 3CD protein, as indicated by immunoprecipitation using specific antibodies. Northern (RNA) blot analysis of RNA from transfected cells demonstrated comparable levels of RNA replication for each replicon. Transfection of the replicon genomes into cells infected with VV-P1 resulted in the encapsidation of the genomes; serial passage in the presence of VV-P1 resulted in the generation of virus stocks of encapsidated replicons. Analysis of the levels of protein expression and encapsidated replicon RNA from virus stocks after 21 serial passages of the replicon genomes with VV-P1 indicated that the replicon which contained the VP4 coding region was present at a higher level than the replicon which contained a complete substitution of the P1 capsid sequences. These differences in encapsidation, though, were not detected after only two serial passages of the replicons with VV-P1 or upon coinfection and serial passage with type 1 Sabin poliovirus.(ABSTRACT TRUNCATED AT 400 WORDS)     

A second neutralizing epitope of B19 parvovirus implicates the spike region in the immune response.

We used 18 monoclonal antibodies against B19 parvovirus to identify neutralizing epitopes on the viral capsid. Of the 18 antibodies, 9 had in vitro neutralizing activity in a bone marrow colony culture assay. The overlapping polypeptide fragments spanning the B19 structural proteins were produced in a pMAL-c Escherichia coli expression system and used to investigate the binding sites of the neutralizing antibodies. One of the nine neutralizing antibodies reacted with both VP1 and VP2 capsid proteins and a single polypeptide fragment on an immunoblot, identifying a linear neutralizing epitope between amino acids 57 and 77 of the VP2 capsid protein. Eight of nine neutralizing antibodies failed to react with either of the capsid proteins or any polypeptide fragments, despite reactivities with intact virions in a radioimmunoassay, suggesting that additional conformationally dependent neutralizing epitopes exist.     

Structural factors modulate the activity of antigenic poliovirus sequences expressed on hybrid hepatitis B surface antigen particles.

We have studied the functional expression of antigenic poliovirus fragments carried by various hybrid hepatitis B surface antigen (HBsAg) particles. Several constructions were made by using two different insertion sites in the HBsAg molecule (amino acid positions 50 and 113) and two different sequences, one derived from poliovirus type 1 (PV-1) and the other from PV-2. The inserted fragments each encompassed residues 93 to 103 of the capsid protein VP1, a segment which includes the linear part of the neutralization antigenic site 1 of the poliovirus. The antigenicity and immunogenicity of the hybrid particles were evaluated and compared in terms of poliovirus neutralization. A high level of antigenic and immunogenic activity of the PV-1 fragment was obtained by insertion at position 113 but not at position 50 of HBsAg. However, a cooperative effect was observed when two PV-1 fragments were inserted at both positions of the same HBsAg molecule. Antibodies elicited by the PV-2 fragment inserted at amino acid position 113 did not bind or neutralize the corresponding poliovirus strain. They did, however, bind a chimeric poliovirus in which the homologous antigenic fragment of PV-1 had been replaced by that of PV-2. The only virions that were neutralized by these antibodies were certain mutants carrying amino acid substitutions within the PV-2 fragment. These results show that position, constraints from the carrier protein, and nature of the inserted sequences are critically important in favoring or limiting the expression of antigenic fragments as viral neutralization immunogens.     

The VP1 N-terminal sequence of canine parvovirus affects nuclear transport of capsids and efficient cell infection.

The unique N-terminal region of the parvovirus VP1 capsid protein is required for infectivity by the capsids but is not required for capsid assembly. The VP1 N terminus contains a number of groups of basic amino acids which resemble classical nuclear localization sequences, including a conserved sequence near the N terminus comprised of four basic amino acids, which in a peptide can act to transport other proteins into the cell nucleus. Testing with a monoclonal antibody recognizing residues 2 to 13 of VP1 (anti-VP1-2-13) and with a rabbit polyclonal serum against the entire VP1 unique region showed that the VP1 unique region was not exposed on purified capsids but that it became exposed after treatment of the capsids with heat (55 to 75 degrees C), or urea (3 to 5 M). A high concentration of anti-VP1-2-13 neutralized canine parvovirus (CPV) when it was incubated with the virus prior to inoculation of cells. Both antibodies blocked infection when injected into cells prior to virus inoculation, but neither prevented infection by coinjected infectious plasmid DNA. The VP1 unique region could be detected 4 and 8 h after the virus capsids were injected into cells, and that sequence exposure appeared to be correlated with nuclear transport of the capsids. To examine the role of the VP1 N terminus in infection, we altered that sequence in CPV, and some of those changes made the capsids inefficient at cell infection.     

Identification of cross-reactive and serotype 2-specific neutralization epitopes on VP3 of human rotavirus.

The group A rotaviruses are composed of at least seven serotypes. Serotype specificity is defined mainly by an outer capsid protein, VP7. In contrast, the other surface protein, VP3 (775 amino acids), appears to be associated with both serotype-specific and heterotypic immunity. To identify the cross-reactive and serotype-specific neutralization epitopes on VP3 of human rotavirus, we sequenced the VP3 gene of antigenic mutants resistant to each of seven anti-VP3 neutralizing monoclonal antibodies (N-MAbs) which exhibited heterotypic or serotype 2-specific reactivity, and we defined three distinct neutralization epitopes on VP3. The mutants sustained single amino acid substitutions at position 305, 392, 433, or 439. Amino acid position 305 was critical to epitope I, whereas amino acid position 433 was critical to epitope III. In contrast, epitope II appeared to be more dependent upon conformation and protein folding because both amino acid positions 392 and 439 appeared to be critical. These four positions clustered in a relatively limited area of VP5, the larger of the two cleavage products of VP3. At the positions where amino acid substitutions occurred, there was a correlation between amino acid sequence homology among different serotypes and the reactivity patterns of various viruses with the N-MAbs used for selection of mutants. A synthetic peptide (amino acids 296 to 313) which included the sequence of epitope I reacted with its corresponding N-MAb, suggesting that the region contains a sequential antigenic determinant. These data may prove useful in current efforts to develop vaccines against human rotavirus infection.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

Unprocessed foot-and-mouth disease virus capsid precursor displays discontinuous epitopes involved in viral neutralization.

A foot-and-mouth disease virus (FMDV) cDNA cassette containing sequences encoding the capsid precursor P1, peptide 2A and a truncated 2B (abbreviated P1-2A) of type C FMDV, has been modified to generate the authentic amino terminus and the myristoylation signal. This construct has been used to produce a recombinant baculovirus (AcMM53) which, upon infection of Spodoptera frugiperda insect cells, expressed a recombinant P1-2A precursor with a high yield. This polyprotein reacted with neutralizing monoclonal antibodies (MAbs) that bind to continuous epitopes of the major antigenic site A (also termed site 1) of capsid protein VP1. Unexpectedly, it also reacted with neutralizing MAbs which define complex, discontinuous epitopes previously identified on FMDV particles. The reactivity of MAbs with P1-2A was quantitatively similar to their reactivity with intact virus and, in both cases, the reactivity with MAbs that recognized discontinuous epitopes was lost upon heat denaturation of the antigen. The finding that a capsid precursor may fold in such a way as to maintain discontinuous epitopes involved in virus neutralization present on the virion surface opens the possibility of using unprocessed capsid precursors as novel antiviral immunogens.