Conformational stability of triazolyl functionalized collagen triple helices

Functionalized collagen is attractive for the development of synthetic biomaterials. Herein we present the functionalization of azidoproline containing collagen model peptides with various alkynes using click chemistry. The influence on the stability of the collagen triple helix of the stereochemistry of the introduced triazolyl prolines (4R or 4S), the position of their incorporation (Xaa or Yaa) and the substituents attached to them are shown. The results provide a useful guide for the optimal functionalization of collagen using click chemistry.     

Molecular stability of chemically modified collagen triple helices

Ionic residues influence the stability of collagen triple helices and play a relevant role in the spontaneous aggregation of fibrillar collagens. Collagen types I and II and some of their CNBr peptides were chemically modified in mild conditions with two different protocols. Primary amino groups of Lys and Hyl were N-methylated by formaldehyde in reducing conditions or N-acetylated by sulfosuccinimidyl acetate. The positive charge of amino groups at physiological pH was maintained after the former modification, whereas it was lost after the latter. These chemical derivatizations did not significantly alter the stability of the triple helical conformation of peptide trimeric species. Also the enthalpic change on denaturation was largely unaffected by derivatizations. This implies that no significant variation of weak bonds, either in number or overall strength, and of entropy occur on modification. These properties can probably be explained by the fact that chemically modified groups maintain the ability to form hydrogen bonds.     

Underhydroxylated minor cartilage collagen precursors cannot form stable triple helices.

Matrix-free cells from chick-embryo sterna were incubated with various concentrations of 2,2'-bipyridyl, an iron chelator that inhibits prolyl hydroxylase and lysyl hydroxylase. At concentrations in the region of 0.1 mM, significant effects on cartilage collagen hydroxylation and secretion were observed. When the underhydroxylated collagens were subsequently digested with chymotrypsin or chymotrypsin plus trypsin at 4 degrees C for 15 min, the minor cartilage collagen precursors (namely types IX and XI) were extensively degraded; type II procollagen was only partially susceptible and was converted into underhydroxylated collagen. The results demonstrate that there were significant differences in triple-helix stability among cartilage collagens such that the underhydroxylated minor collagen precursors were unable to attain a native structure under conditions where type II procollagen was successful.     

Ferrocene-assisted stabilization of collagen mimetic triple helices: solid-phase synthesis and structure

A series of ferrocene-containing collagen models Fc-CO-(Pro-Hyp-Gly)n-Cys (n = 4 (1), 6 (2), 7 (3), 8 (4), 9 (5)) were synthesized by solid-phase synthesis. Biophysical studies using circular dichroism (CD) show that these collagen analogues form triple-helical conformations, and the peptides showed a range of thermal stabilities ((T(m)), 38-74 degrees C). Results also indicate that the ferrocene (Fc)-labeled collagen models possesses a higher triple-helical propensity than the unlabeled collagen models as demonstrated by the higher melting temperatures and thermodynamic parameters, and we conclude that the Fc group at the N-terminal position of the peptide strands increases the stability of the triple helix.     

Contribution of tertiary amides to the conformational stability of collagen triple helices

The collagen triple helix is composed of three polypeptide strands, each with a sequence of repeating (Xaa-Yaa-Gly) triplets. In these triplets, Xaa and Yaa are often tertiary amides: L-proline (Pro) and 4(R)-hydroxy-L-proline (Hyp). To determine the contribution of tertiary amides to triple-helical stability, Pro and Hyp were replaced in synthetic collagen mimics with a non-natural acyclic tertiary amide: N-methyl-L-alanine (meAla). Replacing a Pro or Hyp residue with meAla decreases triple-helical stability. Ramachandran analysis indicates that meAla residues prefer to adopt straight phi and psi angles that are dissimilar from those of the Pro and Hyp residues in the collagen triple helix. Replacement with meAla decreases triple-helical stability more than does replacement with Ala. All of the peptide bonds in triple-helical collagen are in the trans conformation. Although an Ala residue greatly prefers the trans conformation, a meAla residue exists as a nearly equimolar mixture of trans and cis conformers. These findings indicate that the favorable contribution of Pro and Hyp to the conformational stability of collagen triple helices arises from factors other than their being tertiary amides.     

Stabilization of short collagen-like triple helices by protein engineering

Recombinant expression of collagens and fragments of collagens is often difficult, as their biosynthesis requires specific post-translational enzymes, in particular prolyl 4-hydroxylase. Although the use of hydroxyproline-deficient variants offers one possibility to overcome this difficulty, these proteins usually differ markedly in stability when compared with the hydroxyproline-containing analogs. Here, we report a method to stabilize collagen-like peptides by fusing them to the N terminus of the bacteriophage T4 fibritin foldon domain. The isolated foldon domain and the chimeric protein (GlyProPro)(10)foldon were expressed in a soluble form in Escherichia coli. The recombinant proteins and the synthetic (ProProGly)(10) peptide were characterized by circular dichroism (CD) spectroscopy, differential scanning calorimetry, and analytical ultracentrifugation. We show that the foldon domain, which comprises only 27 amino acid residues, forms an obligatory trimer with a high degree of thermal stability. The CD thermal unfolding profiles recorded from foldon are monophasic and completely reversible upon cooling. Similar Van't Hoff and calorimertic enthalpy values of trimer formation indicated a cooperative all-or-none transition. As reported previously, (ProProGly)(10) peptides form collagen triple helices of only moderate stability. When fused to the foldon domain, however, triple helix formation of (GlyProPro)(10) is concentration independent, and the midpoint temperature of the triple helix unfolding is significantly increased. The stabilizing function of the trimeric foldon domain is explained by the close vicinity of its N termini, which induce a high local concentration in the range of 1 M for the C termini of the collagen-like-peptide. Collagen-foldon fusion proteins should be potentially useful to study receptor-collagen interactions.     

Interactions between poly(Gly-Pro-Pro) triple helices: a model for molecular packing in collagen

Potential-energy calculations are reported on the interaction between two collagenlike triple-stranded poly(Gly-L-Pro-L-Pro) helices. Short helices can pack in a variety of orientations, but there is a unique parallel packing arrangement of the two helices for longer polypeptide chains.     

Sequence-specific recognition of collagen triple helices by the collagen-specific molecular chaperone HSP47

HSP47 is a molecular chaperone that plays an unknown role during the assembly and transport of procollagen. Our previous studies showed that, unlike most chaperones, HSP47 interacts with a correctly folded substrate. We suggested that HSP47 either stabilizes the correctly folded collagen helix from heat denaturation or prevents lateral aggregation prior to its transport from the endoplasmic reticulum. In this study we have addressed the role of triple helix stability in the binding of HSP47 to procollagen by expressing procollagen molecules with differing thermal stabilities and analyzing their ability to interact with HSP47 within the endoplasmic reticulum. Our results show that HSP47 interacts with thermostable procollagen molecules, suggesting that helix stabilization is not the primary function of HSP47 and that the interaction of HSP47 with procollagen depends upon the presence of a minimum of one Gly-X-Arg triplet within the triple helical domain. Interestingly, procollagen chains containing high proportions of stabilizing triplets formed triple helices and interacted with HSP47 even in the absence of proline hydroxylation, demonstrating that recognition does not depend upon this modification. Our results support the view that HSP47 functions early in the secretory pathway by preventing the lateral aggregation of procollagen chains.     

Stability of G,A triple helices.

In this work we selected double-stranded DNA sequences capable of forming stable triplexes at 20 or 50 degrees C with corresponding 13mer purine oligonucleotides. This selection was obtained by a double aptamer approach where both the starting sequences of the oligonucleotides and the target DNA duplex were random. The results of selection were confirmed by a cold exchange method and the influence of the position of a 'mismatch' on the stability of the triplex was documented in several cases. The selected sequences obey two rules: (i) they have a high G content; (ii) for a given G content the stability of the resulting triplex is higher if the G residues lie in stretches. The computer simulation of the Mg2+, Na+and Cl-environment around three triplexes by a density scaled Monte Carlo method provides an interpretation of the experimental observations. The Mg2+cations are statistically close to the G N7 and relatively far from the A N7. The presence of an A repels the Mg2+from adjacent G residues. Therefore, the triplexes are stabilized when the Mg2+can form a continuous spine on G N7.     

Energetics of strand-displacement reactions in triple helices: a spectroscopic study.

DNA triple helices offer exciting new perspectives toward oligonucleotide-directed inhibition of gene expression. Purine and GT triplexes appear to be the most promising motifs for stable binding under physiological conditions compared to the pyrimidine motif, which forms at relatively low pH. There are, however, very little data available for comparison of the relative stabilities of the different classes of triplexes under identical conditions. We, therefore, designed a model system which allowed us to set up a competition between the oligonucleotides of the purine and pyrimidine motifs targeting the same Watson-Crick duplex. Several conclusions may be drawn: (i) a weak hypochromism at 260 nm is associated with purine triplex formation; (ii) delta H degree of GA, GT and TC triplex formation (at pH 7.0) was calculated as -0.1, -2.5 and -6.1 kcal/mol per base triplet, respectively. This unexpectedly low delta H degree for the purine triple helix formation implies that its delta G degree is nearly temperature-independent and it explains why these triplexes may still be observed at high temperatures. In contrast, the pyrimidine triplex is strongly favoured at lower temperatures; (iii) as a consequence, in a system where two third-strands compete for triplex formation, displacement of the GA or GT strand by a pyrimidine strand may be observed at neutral pH upon lowering the temperature. This original purine-to-pyrimidine triplex conversion shows a significant hypochromism at 260 nm and a hyperchromism at 295 nm which is similar to the duplex-to-triplex conversion in the pyrimidine motif. Further evidence for this triplex-to-triplex conversion is provided by mung bean-nuclease foot-printing assay.     

Structural stability of DNA in nonaqueous solvents

One of the defining physicochemical features of DNA in aqueous solution is its ability to maintain a double-helical structure and for this structure to undergo a cooperative, heat-induced denaturation (melting). Herein we show that a 21-mer synthetic DNA can form and maintain such a duplex structure not only in water but even in 99% glycerol; moreover, this double-helical structure reversibly and cooperatively melts in that solvent, with a T(m) value of some 30 degrees lower than in water. Two much larger, natural DNAs, from calf thymus and salmon testes, exhibit similar behavior in glycerol. All three DNAs can also sustain a double-helical structure in 99% ethylene glycol, although its thermostability (as reflected by the melting temperature) is some 20 degrees lower than in glycerol. In contrast, no duplex structure of any of the DNAs was detected in 99% formamide, methanol, or DMSO. This solvent trend resembles that previously observed in studies of protein structure and folding and underscores the importance of hydrophobic interactions in both protein and DNA structure and stability. Our findings suggest that water may not be unique as a suitable medium not only for protein structure but also for that of nucleic acids.     

Direct measurement of temperature-dependent solvation forces between DNA double helices.

The assembly of double stranded DNA helices with divalent manganese ion is favored by increasing temperature. Direct force measurements, obtained from the osmotic stress technique coupled with x-ray diffraction, show that the force characteristics of spontaneously precipitated Mn(2+)-DNA closely resemble those observed previously by us for other counterion condensed DNA assemblies. At temperatures below the critical one for spontaneous assembly, we have quantitated the changes in entropy and manganese ion binding associated with the transition from repulsive to attractive interactions between helices mediated by osmotic stress. The release of structured water surrounding the DNA helix to the bulk solution is the most probable source of increased entropy after assembly. Increasing the water entropy of the bulk solution by changing the manganese salt anion from CI- to ClO4- predictably and quantitatively increases the transition entropy. This is further evidence for the dominating role of water in the close interaction of polar surfaces.     

Theoretical pi-pi absorption, circular dichroic, and linear dichroic spectra of collagen triple helices

Absorption, CD, and LD spectra of the π-π* transition near 200 nm are calculated for poly(Gly-X-Y) (X,Y = Gly, Ala, Pro) in four conformations proposed for collagen like triple helices in the recent literature. A dipole interaction model is used with the same optical paramenters as in previous studies of polypeptide spectra. The CD spectra are sensitive to backbone structure and amino acid composition, although the experimentally observed negative peak near 200 nm is a general feature of most the calculated spectra. Interchain interactions significantly affect the CD spectra in most cases. Calculations for (Gly-Pro-Ala)₃ and (Gly-Ala-Pro)₃ in the triple helical structure of Fraser, MacRae, and Suzuki [(1979) J. Mol. Biol. 129 , 463–481] show absorption, CD, and LD spectra in fairly good agreement with experiment. The characteristics of the π-π* normal modes responsible for the calculated spectra are compared with those of the component bands resolved from the experimental spectra of collagen by Mandel and Holzwarth [(1973) Biopolymers 12 , 655–674].     

Solvent effects on self-assembly of beta-amyloid peptide.

beta-amyloid peptide (A beta) is the primary protein component of senile plaques in Alzheimer's disease patients. Synthetic A beta spontaneously assembles into amyloid fibrils and is neurotoxic to cortical cultures. Neurotoxicity has been associated with the degree of peptide aggregation, yet the mechanism of assembly of A beta into amyloid fibrils is poorly understood. In this work, A beta was dissolved in several different solvents commonly used in neurotoxicity assays. In pure dimethylsulfoxide (DMSO), A beta had no detectable beta-sheet content; in 0.1% trifluoroacetate, the peptide contained one-third beta-sheet; and in 35% acetonitrile/0.1% trifluoroacetate, A beta was two-thirds beta-sheet, equivalent to the fibrillar peptide in physiological buffer. Stock solutions of peptide were diluted into phosphate-buffered saline, and fibril growth was followed by static and dynamic light scattering. The growth rate was substantially faster when the peptide was predissolved in 35% acetonitrile/0.1% trifluoroacetate than in 0.1% trifluoroacetate, 10% DMSO, or 100% DMSO. Differences in growth rate were attributed to changes in the secondary structure of the peptide in the stock solvent. These results suggest that formation of an intermediate with a high beta-sheet content is a controlling step in A beta self-assembly.     

Kinetic studies on the formation of intermolecular triple helices.

We have used DNase I footprinting to examine the association kinetics of GA-, GT- and CT-containing oligonucleotides with the target sequence (GGA)5GG. (CCT)5CC. These reactions are slow yielding bimolecular association rate constants between 50 and 2000 M-1s-1. We find that GT-containing oligonucleotides bind much faster than GA- or CT-containing third strands. In each case the observed rate constants are faster at the centre than at the edges of the target site. Although several explanations can be offered for this observation, it is consistent with a model in which triplex formation at this repetitive site is achieved via intermediate complexes in which the third strand is not properly aligned with its target and which subsequently migrate to the correct position.     

Effects of hydrogen-bond deletion on peptide helices: structural characterization of depsipeptides containing lactic acid

The insertion of alpha-hydroxy acids into peptide chains provides a convenient means for investigating the effects of hydrogen bond deletion on polypeptide secondary structures. The crystal structures of three oligopeptides containing L-lactic acid (Lac) residue have been determined. Peptide 1, Boc-Val-Ala-Leu-Aib-Val-Lac-Leu-Aib-Val-Ala-Leu-OMe (Boc: tert-butyloxycarbonyl; Aib: alpha- aminoisobutyric acid; OMe: methyl ester), and peptide 2, Boc-Val-Ala-Leu-Aib-Val-Lac-Leu-Aib-Val-Leu-OMe, adopt completely helical conformations in the crystalline state with the Lac(6) residue comfortably accommodated in the center of a helix. The distance between the O atoms of Leu(3) CO group and the Lac(6) O (ester) in both the structures is 3.1-3.3 A. The NMR and CD studies of peptide 1 and its all-amide analogue 4, Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Aib-Val-Ala-Leu-OMe, provide firm evidence for a continuous helical conformation in solution in both the cases. In a 14-residue peptide 3, Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Val-Ala-Leu-Aib-Val-Lac-Leu-OMe, residues Val(1)-Leu(10) adopt a helical conformation. Aib(11) is the site of chiral reversal resulting in helix termination by formation of a Schellman motif. Residues 12-14 adopt nonhelical conformations. The loss of the hydrogen bond near the C-terminus appears to facilitate the chiral reversal at Aib(11). Published 2001 John Wiley & Sons, Inc. Biopolymers 59: 276-289, 2001     

Enzymatic synthesis and modification of polymers in nonaqueous solvents

Enzymes catalyse several reactions that are difficult to perform with chemical catalysts and that are important in the synthesis and modification of different polymers in organic solvents. In enzyme-based synthesis, alteration of the reaction medium can have a significant influence on the molecular weight, polydispersity, yield and architecture of the polymers that are produced. Modification of these macromolecules for industrial applications requires an understanding of the different reaction strategies involved.