Defective oligomerization of arylsulfatase a as a cause of its instability in lysosomes and metachromatic leukodystrophy.

In one of the most common mutations causing metachromatic leukodystrophy, the P426L-allele of arylsulfatase A (ASA), the deficiency of ASA results from its instability in lysosomes. Inhibition of lysosomal cysteine proteinases protects the P426L-ASA and restores the sulfatide catabolism in fibroblasts of the patients. P426L-ASA, but not wild type ASA, was cleaved by purified cathepsin L at threonine 421 yielding 54- and 9-kDa fragments. X-ray crystallography at 2.5-A resolution showed that cleavage is not due to a difference in the protein fold that would expose the peptide bond following threonine 421 to proteases. Octamerization, which depends on protonation of Glu-424, was impaired for P426L-ASA. The mutation lowers the pH for the octamer/dimer equilibrium by 0.6 pH units from pH 5.8 to 5.2. A second oligomerization mutant (ASA-A464R) was generated that failed to octamerize even at pH 4.8. A464R-ASA was degraded in lysosomes to catalytically active 54-kDa intermediate. In cathepsin L-deficient fibroblasts, degradation of P426L-ASA and A464R-ASA to the 54-kDa fragment was reduced, while further degradation was blocked. This indicates that defective oligomerization of ASA allows degradation of ASA to a catalytically active 54-kDa intermediate by lysosomal cysteine proteinases, including cathepsin L. Further degradation of the 54-kDa intermediate critically depends on cathepsin L and is modified by the structure of the 9-kDa cleavage product.     

Analysis of the dynamic equilibrium of histone oligomers in a solution. The nature of forces stabilizing the (H2A-H2B-H3-H4)2 octamer structure

Dynamic equilibrium analysis of the (H2A-H2B-H3-H4)2 histone octamer with lower oligomers was performed in 2 M NaCl. Calculated data on the relative content of histone oligomers upon changing protein concentration in solution are given. The red shift of lambda max for histone tyrosine fluorescence spectra is shown to be due to hydrogen bond formation by tyrosyl OH-groups. Analysis of free energy changes of histone oligomers upon association (delta G = -17,37 +/- 0,14 kcal/mole) as well as the effect of urea on histone octamer dissociation made it possible to conclude that virtually all tyrosyls in octamer form hydrogen bonds. Intermolecular hydrogen bonds formed by tyrosyls contribute substantially to octamer stabilization. The (H2A-H2B) dimer positive cooperativity in association with the (H3-H4)2 tetramer was found. This cooperativity is caused by interaction between association sites with a two order increase in an apparent constant of dimers with tetramer association. The histone octamer was determined to be of asymmetric structure due to unequivolency of the two binding sites for the (H2A-H2B) dimers.     

The oxidised histone octamer does not form a H3 disulphide bond

A H3 dimer band is produced when purified native histone octamers are run on an SDS-PAGE gel in a beta-mercaptoethanol-free environment. To investigate this, native histone octamer crystals, derived from chicken erythrocytes, and of structure (H2A-H2B)-(H4-H3)-(H3'-H4')-(H2B'-H2A'), were grown in 2 M KCl, 1.35 M potassium phosphates and 250-350 microM of the oxidising agent S-nitrosoglutathione, pH 6.9. X-ray diffraction data were acquired to 2.10 A resolution, yielding a structure with an Rwork value of 18.6% and an Rfree of 22.5%. The space group is P6(5), the asymmetric unit of which contains one complete octamer. Compared to the 1.90 A resolution, unoxidised native histone octamer structure, the crystals show a reduction of 2.5% in the c-axis of the unit cell, and free-energy calculations reveal that the H3-H3' dimer interface in the latter has become thermodynamically stable, in contrast to the former. Although the inter-sulphur distance of the two H3 cysteines in the oxidised native histone octamer has reduced to 6 A from the 7 A of the unoxidised form, analysis of the hydrogen bonds that constitute the (H4-H3)-(H3'-H4') tetramer indicates that the formation of a disulphide bond in the H3-H3' dimer interface is incompatible with stable tetramer formation. The biochemical and biophysical evidence, taken as a whole, is indicative of crystals that have a stable H3-H3' dimer interface, possibly extending to the interface within an isolated H3-H3' dimer, observed in SDS-PAGE gels.     

Kinetics and thermodynamics of the interchange of the morpheein forms of human porphobilinogen synthase

A morpheein is a homo-oligomeric protein that can adopt different nonadditive quaternary assemblies (morpheein forms) with different functionalities. The human porphobilinogen synthase (PBGS) morpheein forms are a high activity octamer, a low activity hexamer, and two structurally distinct dimer conformations. Conversion between hexamer and octamer involves dissociation to dimers, conformational change at the dimer level, followed by association to the alternate assembly. The current work promotes an alternative and novel view of the physiologically relevant dimeric structures, which are derived from the crystal structures, but are distinct from the asymmetric units of their crystal forms. Using a well characterized heteromeric system (WT+F12L; Tang, L. et al. (2005) J. Biol. Chem. 280, 15786-15793), extensive study of the human PBGS morpheein reequilibration process now reveals that the intervening dimers do not dissociate to monomers. The morpheein equilibria of wild type (WT) human PBGS are found to respond to changes in pH, PBGS concentration, and substrate turnover. Notably, the WT enzyme is predominantly an octamer at neutral pH, but increasing pH results in substantial conversion to lower order oligomers. Most significantly, the free energy of activation for the conversion of WT+F12L human PBGS heterohexamers to hetero-octamers is determined to be the same as that for the catalytic conversion of substrate to product by the octamer, remarkably suggesting a common rate-limiting step for both processes, which is postulated to be the opening/closing of the active site lid.     

1H- and 13C-NMR studies of N-acetyl-L-alanine methylester and N-acetyl-L-alanine methylamide. I. Self-association

The ¹H- and ¹³C-NMR spectra of N-acetyl-L -alanine methylester and N-acetyl-L -alanine methylamide were measured to examine the modes of self-association of these molecules in solution. The different dilution shifts between these molecules seem to correspond to the difference in the associated state for each molecule. Consequently, for the former molecule, a dimer model forming the intermolecular hydrogen bond through Ala NH hydrogen atom in one molecule to Ala C?O oxygen atom in another molecule was proposed. Another dimer model, which coincides with that proposed recently by Neel and coworkers, was proposed for the latter molecule. This second dimer model forms an intermolecular hydrogen bond through the NH of the N-methylamide group in one molecule to the acetyl C?O in another molecule.     

The role of a hydrogen bonding network in the transmembrane beta-barrel OMPLA

The hydrogen bonding of polar side-chains has emerged as an important theme for membrane protein interactions. The crystal structure of the dimeric state of the transmembrane beta-barrel protein outer membrane phospholipase A (OMPLA) revealed an intermolecular hydrogen bond mediated by a highly conserved glutamine side-chain (Q94). It has been shown that the introduction of a polar residue can drive the association of model helices, and by extension it was presumed that the glutamine hydrogen bond played a key role in stabilizing the OMPLA dimer. However, a thermodynamic investigation using sedimentation equilibrium ultracentrifugation in detergent micelles reveals that the hydrogen bond plays only a very modest role in stabilizing the dimer. The Q94 side-chain is hydrogen bonded intramolecularly to residues Y92 and S96, but amino acid substitutions at these positions suggest these intramolecular interactions are not responsible for attenuating the strength of the intermolecular Q94 hydrogen bond. Other substitutions suggested that hydration of the local environment around Q94 may be responsible for the modest strength of the hydrogen bond. Heat inactivation experiments with the variants suggest that the Y92-Q94-S96 network may instead be important for thermal stability of the monomer. These results highlight the context dependence and broad range of interactions that can be mediated by polar residues in membrane proteins.     

The pH-dependent stability of wild-type and mutant transthyretin oligomers

A reduction in pH is known to induce the disassociation of the tetrameric form of transthyretin and favor the formation of amyloid fibers. Using continuum electrostatic techniques, we calculate the titration curves and the stability of dimer and tetramer formation of transthyretin as a function of pH. We find that the tetramer and the dimer become less stable than the monomer as the pH is lowered. The free energy difference is 13.8 kcal/mol for dimer formation and 27 kcal/mol for tetramer formation, from the monomers, when the pH is lowered from 7 to 3.9. Similar behavior is observed for both the wild-type and the mutant protein. Certain residues (namely Glu-72, His-88, His-90, Glu-92, and Tyr-116), play an important role in the binding process, as seen by the considerable pK(1/2) change of these residues upon dimer formation.     

Isoelectric point heterogeneity of the two oligomeric forms of heart mitochondrial creatine kinase

Rabbit heart mitochondrial creatine kinase has been recently shown to exist in two oligomeric forms: a dimer and an octamer, the latter being the form associated with the inner mitochondrial membrane [(1988) Biochem.Biophys. Res. Commun. 153,1310.]. We report here on the determination of the isoelectric points (pI) of the two purified forms by thin layer isoelectric focusing. The pI of the dimer is 8.2 and that of the octamer is 8.8; the former is higher by more than one pH unit than that of the cytoplasmic form MM-CK. It is proposed that the higher pI of the octamer is responsible for its binding to the inner membrane.     

Dimers to doughnuts: redox-sensitive oligomerization of 2-cysteine peroxiredoxins

2-Cys peroxiredoxins (Prxs) are a large and diverse family of peroxidases which, in addition to their antioxidant functions, regulate cell signaling pathways, apoptosis, and differentiation. These enzymes are obligate homodimers (alpha(2)), utilizing a unique intermolecular redox-active disulfide center for the reduction of peroxides, and are known to form two oligomeric states: individual alpha(2) dimers or doughnut-shaped (alpha(2))(5) decamers. Here we characterize both the oligomerization properties and crystal structure of a bacterial 2-Cys Prx, Salmonella typhimurium AhpC. Analytical ultracentrifugation and dynamic light scattering show that AhpC's oligomeric state is redox linked, with oxidization favoring the dimeric state. The 2.5 A resolution crystal structure (R = 18.5%, R(free) = 23.9%) of oxidized, decameric AhpC reveals a metastable oligomerization intermediate, allowing us to identify a loop that adopts distinct conformations associated with decameric and dimeric states, with disulfide bond formation favoring the latter. This molecular switch contains the peroxidatic cysteine and acts to buttress the oligomerization interface in the reduced, decameric enzyme. A structurally detailed catalytic cycle incorporating these ideas and linking activity to oligomeric state is presented. Finally, on the basis of sequence comparisons, we suggest that the enzymatic and signaling activities of all 2-Cys Prxs are regulated by a redox-sensitive dimer to decamer transition.     

A predominant role for hydrogen bonding in the stability of the homodimer of bothropstoxin-I, A lysine 49-phospholipase A2

Bothropstoxin-I (BthTx-I) is a homodimeric Lys49-phospholipase A(2) isolated from Bothrops jararacussu venom which damages liposome membranes via a Ca(2+)-independent mechanism. The Glu12/Trp77/Lys80 triad at the dimer interface forms extensive intermolecular hydrogen bonds and hydrophobic contacts, and equilibrium chemical denaturation was used to evaluate the effect on homodimer stability of site-directed mutagenesis of these residues. Changes in the intrinsic fluorescence anisotropy and farUV circular dichroism signals were analyzed using a two-step unfolding model of the BthTx-I dimer to estimate the Gibbs free energy changes of transitions between the dimer and native monomer and between the native and denatured monomers. Whereas the Trp77His, Trp77Gln and Glu12Gln mutants showed native-like dimer stabilities, the Trp77Phe, Lys80Met and Lys80Gly mutants showed significantly reduced K(d) values. A reduced dimer stability is correlated with a decrease in the Ca(2+)-independent membrane damaging activity as monitored by the release of a liposome entrapped fluorescent marker. Although the membrane damaging activity of the monomer is fivefold less than the dimer, the myotoxic activity was unaffected, indicating that these two effects are not correlated. These data suggest that the BthTx-I dimer is predominantly stabilized by hydrogen bonding interactions, and highlight the importance of the homodimeric form for efficient Ca(2+)-independent membrane damage.     

Stability of a model beta-sheet in water.

We have used molecular dynamics simulations to determine the stability in water of a model beta-sheet formed by two alanine dipeptide molecules with two intermolecular hydrogen bonds in the closely spaced antiparallel arrangement. In this paper we describe our computations of the binding free energy of the model sheet and a portion of the free energy surface as a function of a reaction co-ordinate for sheet formation. We used the free energy surface to identify stable conformations along the reaction co-ordinate. To determine whether or not the model sheet with two hydrogen bonds is more stable than a single amide hydrogen bond in water, we compared the results of the present calculations to results from our earlier study of linear hydrogen bond formation between two formamide molecules (the formamide "dimer"). The free energy surfaces for the sheet and formamide dimer each have two minima corresponding to locally stable hydrogen-bonded and solvent-separated configurations. The binding free energies of the model sheet and the formamide dimer are -5.5 and -0.34 kcal/mol, respectively. Thus, the model sheet with two hydrogen bonds is quite stable while the simple amide hydrogen bond is only marginally stable. To understand the relative stabilities of the model sheet and formamide dimer in terms of solute-solute and solute-water interactions, we decomposed the free energy differences between hydrogen-bonded and solvent-separated conformations into energetic and entropic contributions. The changes in the peptide-peptide energy and the entropy are roughly twice as large for the sheet as they are for the formamide dimer. The magnitude of the peptide-water energy difference for the sheet is less than twice (by about 3.5 kcal/mol) that for the formamide dimer, and this accounts for the stability of the sheet. The presence of the side-chains and/or blocking groups apparently prevents the amide groups in the sheet from being solvated as favorably in the separated arrangement as in the formamide dimer, where the amide groups are completely exposed to the solvent.     

Folding of a de novo designed native-like four-helix bundle protein

The folding of a model native-like dimeric four-helix bundle protein, (alpha(2))(2), was investigated using guanidine hydrochloride, hydrostatic pressure, and low temperature. Unfolding by guanidine hydrochloride followed by circular dichroism and intrinsic fluorescence spectroscopy revealed a highly cooperative transition between the native-like and unfolded states, with free energy of unfolding determined from CD data, DeltaG(unf) = 14.3 +/- 0.8 kcal/mol. However, CD and intrinsic fluorescence data were not superimposable, indicating the presence of an intermediate state during the folding transition. To stabilize the folding intermediate, we used hydrostatic pressure and low temperature. In both cases, dissociation of the dimeric native-like (alpha(2))(2) into folded monomers (alpha(2)) was observed. van't Hoff analysis of the low temperature experiments, assuming a two-state dimer 171-monomer transition, yielded a free energy of dissociation of (alpha(2))(2) of DeltaG(diss) = 11.4 +/- 0.4 kcal/mol, in good agreement with the free energy determined from pressure dissociation experiments (DeltaG(diss) = 10.5 +/- 0.1 kcal/mol). Binding of the hydrophobic fluorescent probe 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) to the pressure- and cold-dissociated states of (alpha(2))(2) indicated the existence of molten-globule monomers. In conclusion, we demonstrate that the folding pathway of (alpha(2))(2) can be described by a three-state transition including a monomeric molten globule-like state.     

Effect of the central disulfide bond on the unfolding behavior of elongation factor Ts homodimer from Thermus thermophilus

Functionally active elongation factor Ts (EF-Ts) from Thermus thermophilus forms a homodimer. The dimerization interface of EF-Ts is composed of two antiparallel beta-sheets that can be connected by an intermolecular disulfide bond. The stability of EF-Ts from T. thermophilus in the presence and absence of the intermolecular disulfide bond was studied by differential scanning calorimetry and circular dichroism. The ratio of the van't Hoff and calorimetric enthalpies, delta H(vH)/delta H(cal), indicates that EF-Ts undergoes thermal unfolding as a dimer independently of the presence or absence of the disulfide bond. This can be concluded from (1) the presence of residual secondary structure above the thermal transition temperature, (2) the absence of concentration dependence, which would be expected for dissociation of the dimer prior to unfolding of the monomers, and (3) a relatively low heat capacity change (delta Cp) upon unfolding. The retained dimeric structure of the thermally denatured state allowed for the determination of the effect of the intermolecular disulfide bond on the conformational stability of EF-Ts, which is deltadelta G(S-S,SH HS) = 10.5 kJ/mol per monomer at 72.5 degrees C. The possible physiological implications of the dimeric EF-Ts structure and of the intersubunit disulfide bond for the extreme conformational stability of proteins in thermophiles are discussed.     

Role of bound water in protein-ligand association processes

The role of water molecules on the protein-ligand interface during macromolecular association has been determined. The free energy of association of insulin has been calculated by the methods of molecular mechanics and continual electrostatics (Poisson-Boltzmann model). The previously developed scheme of the decomposition of association free energy onto contributions from individual interactions has been used to calculate intermolecular interactions, the solvation free energy, and the entropies of the process of macromolecular association. An analysis of the calculated oscillation spectra indicated that the presence of water molecules on the protein-protein interface promotes an increase in the contribution of vibration entropy to the free energy of association due to the enhancement of the flexibility of the complex. It was shown that water molecules involved in the formation of protein-water-ligand hydrogen bond network change the balance of forces in the system.     

H2O2-induced intermolecular disulfide bond formation between receptor protein-tyrosine phosphatases

Receptor protein-tyrosine phosphatase alpha (RPTPalpha) belongs to the subfamily of receptor-like protein-tyrosine phosphatases that are characterized by two catalytic domains of which only the membrane-proximal one (D1) exhibits appreciable catalytic activity. The C-terminal catalytic domain (D2) regulates RPTPalpha catalytic activity by controlling rotational coupling within RPTPalpha dimers. RPTPalpha-D2 changes conformation and thereby rotational coupling within RPTPalpha dimers in response to changes in the cellular redox state. Here we report a decrease in motility of RPTPalpha from cells treated with H2O2 on non-reducing SDS-polyacrylamide gels to a position that corresponds to RPTPalpha dimers, indicating intermolecular disulfide bond formation. Using mutants of all individual cysteines in RPTPalpha and constructs encoding the individual protein-tyrosine phosphatase domains, we located the intermolecular disulfide bond to the catalytic Cys-723 in D2. Disulfide bond formation and dimer stabilization showed similar levels of concentration and time dependence. However, treatment of lysates with dithiothreitol abolished intermolecular disulfide bonds but not stable dimer formation. Intermolecular disulfide bond formation and rotational coupling were also found using a chimera of the extracellular domain of RPTPalpha fused to the transmembrane and intracellular domain of the leukocyte common antigen-related protein (LAR). These results suggest that H2O2 treatment leads to oxidation of the catalytic Cys in D2, which then rapidly forms a disulfide bond with the D2 catalytic Cys of the dyad-related monomer, rendering an inactive RPTP dimer. Recovery from oxidative stress first leads to the reduction of the disulfide bond followed by a slower refolding of the protein to the active conformation.     

Conditions for reciprocal conversion of oligomeric forms of heart mitochondrial creatine kinase

A procedure for purifying creatine kinase from bovine heart mitochondria, including enzyme extraction from mitochondria with salt solutions, concentration on cellulose phosphate gel and gel filtration on Sephacryl S-300 has been developed. Using ultracentrifugation in a sucrose density gradient and gel filtration, it was demonstrated that mitochondrial creatine kinase is present in solution as a mixture of two main forms, i. e., an octamer and a dimer. The distribution of the oligomeric forms is not influenced by changes in the ionic strength from 0.02 to 0.25, temperature (5-20 degrees C), freezing-thawing and the nature of monovalent anions (Cl-, NO3-, CH3COO-) and cations (Na+, K+) present in the medium. At pH 6.0, the predominant form is the octamer; an increase in pH induces its dissociation. An equilibrious mixture of the creatine kinase reaction substrates in the presence of Mg2+ also causes octamer dissociation; no dissociation is observed in the absence of Mg2+ or in the presence of one of the substrates. The non-working couple of substrates, Mg-ADP and creatine, causes dissociation of the octamer in the presence of Cl-, but not of CH3COO-. It is assumed that the dissociating effect of the substrates is due to conformational changes in the subunits concomitant with the formation of the creatine kinase active center in the course of catalysis. At physiological concentrations of nucleotide substrates, the degree of octamer dissociation depends on pH, creatine phosphate/creatine ratio and Pi. It is assumed that the above factors may regulate the reversible conversion of the octamer into the dimer in vivo.     

Modulating calcitonin fibrillogenesis: an antiparallel alpha-helical dimer inhibits fibrillation of salmon calcitonin

We have investigated the prefibrillar state of salmon (s) and human (h) calcitonin (CT). Size exclusion chromatography at pH 3.3 and 7.4 indicates that sCT is present in solution as a dimer, whereas hCT elutes as a monomer at pH 3.3 and as monomer-dimer at pH 7.4. Guanidine hydrochloride unfolding experiments show that dimerization is stabilized by hydrophobic interactions. We investigated the dimeric structure by multidimensional nuclear magnetic resonance spectroscopy and calculations by using an sCT mutant (LAsCT) in which Pro23 and Arg24 were substituted for Leu23 and Ala24. As indicated by the Leu9-Tyr27 and Leu12-Leu19 contacts, the mutated hormone forms a head-to-tail dimer whose basic unit is an alpha-helix in the region Leu12-Tyr22. The solution behavior of LAsCT is identical to that of sCT, so the dimeric structure can safely be extended to sCT: we believe that such a structure inhibits fibril maturation in sCT. No stable dimer was observed for hCT, which we attributed to the absence of a defined helical structure. However, we suggest that intermolecular collisions of short ordered regions (for example, a sequence of turns) in hCT favors intermolecular contacts, and specific orientation can be obtained through hydrogen bond formation involving Tyr12, Phe16, and Phe19, with the aromatic ring acting as an acceptor. Taken together, our results indicate that hCT fibrillation can be reduced by favoring a helical dimer, obtainable by replacing the three aromatic amino acids with leucines.     

Change in dimerization mode by removal of a single unsatisfied polar residue located at the interface

The importance of unsatisfied hydrogen bonding potential on protein-protein interaction was studied. Two alternate modes of dimerization (conventional and flipped form) of an immunoglobulin light chain variable domain (V(L)) were previously identified. In the flipped form, interface residue Gln89 would have an unsatisfied hydrogen bonding potential. Removal of this Gln should render the flipped dimer as the more favorable quaternary form. High resolution crystallographic studies of the Q89A and Q89L mutants show, as we predicted, that these proteins indeed form flipped dimers with very similar interfaces. A small cavity is present in the Q89A mutant that is reflected in the approximately 100 times lower association constant than found for the Q89L mutant. The association constant of Q89A and Q89L proteins (4 x 10(6) M(-1) and >10(8) M(-1)) are 10- and 1,000-fold higher than that of the wild-type protein that forms conventional dimers clearly showing the energetic reasons for the flipped dimer formation.     

Spatial organization of the (H3-H4-H2A-H2B)2 histone octamer

Structure of the (H2A-H2B-H3-H4)2 histone octamer isolated from calf thymus chromatin at ionic strength 0.1 to 4.0 M NaCl, pH 7.6, was studied spectrofluorometrically. Sensitivity of lambda max tyrosine fluorescence position to structural changes of histone oligomers and to the processes of their association was shown. It were detect two ranges of cooperative changes in histone optical parameters at 0.6-1.4 M NaCl (transition I) and at 2.4-3.4 M NaCl (transition II): Transition I corresponds to the formation of equilibrium system (hexamer) + (dimer) in equilibrium octamer. Transition II corresponds to the structural changes of the histone octamer. Thus, fluorescence anisotropy increases, lambda max for fluorescence spectrum is shifted to the longer wavelengths, contributions of two components to fluorescence decay change, a fraction of fluorescence accessible to the quenching by I- decreases. Histone octamer formation is characterized by making specific contacts between the (H2A-H2B) dimer and (H3-H4)2 tetramer. These contacts are realized at gradual changing of ionic strengths (by dialysis). In the case of abrupt local changes of the environment the process is irreversibly shifted to formation of unspecific high molecular aggregates. The important function role for energetically degenerated states of histone oligomers, energy barriers between which can be overcome by changing total conditions of histone microenvironment in chromatin is discussed.     

Ionization of His 55 at the dimer interface of dynein light-chain LC8 is coupled to dimer dissociation

LC8 is a highly conserved light-chain subunit of cytoplasmic dynein that interacts with a wide variety of cellular proteins and is presumed to play a fundamental role in dynein assembly and cargo recruitment and in the assembly of protein complexes unrelated to dynein. LC8 is a dimer at physiological pH but dissociates to a folded monomer at pH < 4.8. We have suggested that acid-induced dimer dissociation is due to protonation of His 55, which is stacked against His 55' and completely buried in the dimer interface. In this work, we show that the pH-induced dissociation is reversible and indeed governed by the ionization state of His 55. Mutagenesis of His 55 to Lys results in a monomer in the pH range of 3-8, while the mutation to Ala results in a dimer in the same pH range. Mutations that disrupt intermolecular hydrogen bonds between Tyr 65 and Lys 44' and His 55 and Thr 67' do not change the association state of the dimer. Titration curves for His 55 and the two other histidines, His 72 and 68, were determined by (13)C-(1)H NMR for H55K and for WT-LC8 in the monomeric and dimeric states. The pK(a) values of His 72 and His 68 are 6 in the WT dimer and 6.2-6.5 in monomeric H55K, while the pK(a) of His 55 is about 4.5 in the WT dimer. These results indicate that deprotonation of His 55 is linked to dimer formation and that mutation of His 55 to a small neutral residue or to a positively charged residue uncouples the protonation and dissociation processes.