Modulation of immobilized enzyme activity by altering the hydrophobicity of nylon-grafted membranes: Part 2: Non-isothermal conditions

Lactose hydrolysis by β-galactosidase immobilized on two nylon membranes, differently grafted, has been studied in a bioreactor operating under isothermal and non-isothermal conditions. One membrane (M₁) was obtained by chemical grafting of methylmethacrylate (MAA); the other one (M₂) by a double chemical grafting: styrene (Sty) and MAA. Hexamethylenediamine was used as a spacer between the grafted membranes and the enzyme. Both membranes have been physically characterized studying their permeabilities in presence of pressure or temperature gradients. Under non-isothermal conditions, the increase in activity of membrane M₂ was higher than that of membrane M₁. The and β coefficients, giving the percentage of activity increase when a temperature difference of 1°C is applied across the catalytic membranes, have been calculated. Results have been discussed with reference to the greater hydrophobicity of membrane M₂ with respect to membrane M₁, the hydrophobicity being a prerequisite for the occurrence of the process of thermodialysis.     

Characterization of the activity of penicillin G acylase immobilized onto nylon membranes grafted with different acrylic monomers by means of γ-radiation

Penicillin G acylase (PGA) has been immobilized onto nylon membranes grafted with methylmethacrylate (MMA) or diethyleneglycoldimethacrylate (DGDA) monomers by means of γ-radiation. Hexamethylenediamine (HMDA) has been used as spacer between the grafted membranes and the enzyme. Glutaraldehyde (GA) was used as crosslinking to couple the enzyme to the HMDA. The catalytic membranes so prepared were studied as a function of pH and temperature of the solution containing the substrate. The membranes showing the best characteristics were the ones grafted with DGDA. The dependence of the behavior of these membranes on several experimental conditions was studied, i.e., the temperature and duration of the aminoalkylation process, spacer concentration, the glutaraldehyde concentration and the enzyme concentration. The experimental conditions giving the best performance of the catalytic membranes have been deduced. The time requested to obtain 50% of substrate conversion, i.e., hydrolysis of cephalexin, has been studied as a function of its initial concentration.     

Modulation of immobilized enzyme activity by altering the hydrophobicity of nylon-grafted membranes: Part 1. Isothermal conditions

The catalytic behaviour under isothermal conditions of two different membranes loaded with β-galactosidase was investigated. One membrane (M₁) was constituted by a nylon sheet grafted with methylmethacrylate by means of chemical grafting. The other, (M₂), was prepared by a double chemical grafting: the first one with styrene (Sty) and the second one with methylmethacrylate. Membrane activity was characterized as a function of temperature, pH and substrate concentration. The role of Sty in increasing membrane hydrophobicity has been discussed. Membrane M₂ was found to be better suited for employment in non-isothermal bioreactors.     

Influence of the spacer length on the activity of enzymes immobilised on nylon/polyGMA membranes: Part 2: Non-isothermal conditions

β-Galactosidase has been immobilised through spacers of different length on nylon membranes grafted with glycidyl methacrylate. Hexamethylendiamine, ethylendiamine or hydrazine have been separately used as spacers.

The behaviour of the catalytic membranes has been studied in a bioreactor operating under non-isothermal conditions as a function of the applied temperature difference ΔT.

Comparison of the enzyme reaction rates under isothermal and non-isothermal conditions resulted in percentage activity increases (PAI) and reduction of the production time (τ_r) proportional to the size of the applied ΔT. Both these parameters increased with the increase of the spacer length.

Results have been discussed in the frame of reference of the process of thermodialysis which reduces the limitations to the diffusion of substrate and reaction products across the catalytic membrane, limitations introduced by the grafting and immobilisation process.

The advantages of employing non-isothermal bioreactors in biotechnological productive processes have been outlined.     

Non-isothermal cephalexin hydrolysis by penicillin G acylase immobilized on grafted nylon membranes

A new catalytic membrane has been prepared using a nylon membrane grafted by γ-radiation with methylmethacrylate (MMA) and using hexamethylenediamine (HMDA) as spacer. Penicillin G acylase (PGA) and cephalexin were employed as catalyst and substrate, respectively. Cephalexin hydrolysis was studied in bioreactors operated under isothermal and non-isothermal conditions. A hydrolysis increase was found when the temperature of the warm membrane surface was kept constant and the temperature of the other membrane surface was kept at a lower value. The hydrolysis increase was linearly proportional to the applied temperature difference. Cephalexin hydrolysis increased to about 10% when a temperature difference of 1°C was applied across the catalytic membrane. These results have been attributed to the non-isothermal cephalexin transport across the membrane, i.e., to the process of thermodialysis. In this way, the enzyme immobilized on and into the membrane reacts with a substrate concentration higher than that produced by simple diffusion under isothermal conditions.     

Influence of the spacer length on the activity of enzymes immobilised on nylon/polyGMA membranes: Part 1. Isothermal conditions

β-Galactosidase was immobilized on nylon/poly(glycidyl methacrylate) membranes through spacers of different length: hexamethylenediamine, ethylenediamine or hydrazine. The effect of the spacer length on the catalytic behavior of the three membranes was studied in isothermal bioreactors. The behavior of the soluble and insoluble enzymes was compared to know the effects of the immobilization process and of the spacer length.

The enzyme derivatives in comparison with the soluble enzyme exhibited shifts of the optimum pH values towards more acidic solutions. These shifts were found decreasing with the spacer length; while an opposite trend was observed when the optimum temperature values were considered. Also the values of the apparent K_m were found to decrease with the spacer length.

All these results indicated that a soluble enzyme could be considered as an enzyme immobilized on a solid support through a spacer of infinite length.     

Production of low-lactose milk by means of nonisothermal bioreactors

The effect of the immobilization time on the activity of immobilized beta-galactosidase from K. lactis was investigated. Six biocatalytic membranes, different only for the time of the enzyme immobilization, were obtained by using nylon membranes grafted with glycidyl methacrylate (GMA) and activated by hexamethylenediamine (HMDA) and glutaraldehyde (Glu), used as spacer and coupling agent, respectively. Comparison between the isothermal and nonisothermal yield of these biocatalytic membranes was carried out in the process of lactose hydrolysis in milk. All of the results, reported as a function of the immobilization time, have evidenced the influence of our variable parameter on the activity of the catalytic membranes. The membrane giving highest yield under isothermal and nonisothermal conditions was that obtained with 2 h of immobilization time. The industrial application of these membranes has been discussed in terms of percentage reduction of the production times.     

Isothermal and non-isothermal characterization of catalytic nylon membranes chemically grafted: dependence on the grafting percentage

The behaviour of five different hydrophobic β-galactosidase derivatives, obtained by grafting different amount of butylmethacrylate (BMA) on planar nylon membranes, has been studied under isothermal and non-isothermal conditions.

Under isothermal conditions the effect of the grafting percentage on the enzyme activity has been studied as a function of pH, temperature and substrate concentration. Independently from the parameters under observation, the yield of the catalytic process reaches the maximum value at a grafting percentage value equal to 21%. The apparent K_m values result linearly increasing with the increase of the grafting percentage, while the apparent V_max exhibits a maximum value.

Under non-isothermal conditions, a decrease of the apparent K_m values and increase of the apparent V_max has been found in respect to the same values obtained under isothermal conditions.

The percentage activity increases induced by the presence of a temperature gradient have been found to decrease with the increase of the percentage of graft BMA.

A parameter correlating the percentage increase of enzyme activity under non-isothermal conditions with the hydrophobicity of the catalytic membrane has also been identified. This parameter is the ratio between thermoosmotic and hydraulic permeability.

Results have been discussed in terms of reduction of diffusion limitations for substrate and products movement towards or away from the catalytic site by the process of thermodialysis.

The usefulness of using non-isothermal bioreactors in industrial biotechnological processes has been confirmed.     

Fungus β-glycosidases: immobilization and use in alkyl-β-glycoside synthesis

Production of β-glycosidases: β-xylosidase and β-glucosidase by the fungus Sclerotinia sclerotiorum was optimized in the presence of different carbon sources. Immobilization supports with different physico-chemical characteristics were evaluated for use in continuous reactors. Immobilization and activity yields were calculated. Among the adsorption on Duolite, Amberlite, Celite and DEAE-sepharose, and entrapment in polyacrylamide gel or reticulation using glutaraldehyde, highest yields were obtained when β-xylosidase was adsorbed on Duolite A 7 and when β-glucosidase was adsorbed on DEAE-sepharose.

Enzyme preparations from S. sclerotiorum cultures were used in a biphasic (alcohol/aqueous) medium for the synthesis of alkyl-glycosides by trans-glycosylation of sugars and long-chain alcohols. The synthesis was studied under different conditions with primary and secondary alcohols as substrates, in the presence of free or immobilized enzyme. Xylan and cellobiose were used for the synthesis of alkyl-xylosides and alkyl-glucosides, respectively. The majority of the immobilized preparations were unable to catalyze the synthesis of alkyl-glycosides.

Highest yields were obtained when using xylan and C₄–C₆-alcohols. The reaction produced alkyl-β-xyloside and alkyl-β-xylobioside, as confirmed by MS/MS. Up to 22 mM iso-amyl-xyloside and 14 mM iso-amyl-xylobioside were produced from iso-amyl alcohol and xylan.     

Catalytic function and affinity purification of site-directed mutant β-cyclodextrin glucanotransferase from alkalophilic Bacillus firmus var. alkalophilus

Subsites −3 and −7 in the active site of β-cyclodextrin glucanotransferase (β-CGTase) from alkalophilic Bacillus firmus var. alkalophilus were modified through site-directed mutagenesis to obtain novel mutant CGTases. Four mutant CGTases, H59Q, Y96M, 90-PPI-92, and Δ(154–160) were constructed and produced using a recombinant E. coli with a secretive expression system extracellularly. The secreted mutant β-CGTases were purified by one-step affinity adsorption chromatography using a β-cyclodextrin (CD) polymer as an adsorbent to nearly homogeneous purity. The catalytic activities were modified significantly compared to the wild-type. In particular, the Y96M and Δ(154–160) mutants increased cyclization activity around 1.5 times without any significant reduction of coupling and hydrolyzing activities. Meanwhile, the Y96M and Δ(154–160) mutants exhibited a much higher conversion yield into CDs from 28.6 to 39% without any recognizable change in the CD ratio. The conversion yield into linear maltooligosaccharides was also significantly reduced. The catalytic functions of subsites −3 and −7 in the active site of β-CGTase would appear to be related to the overall productivity of CDs rather than the product specificity.     

Nonisothermal bioreactors in the treatment of vegetation waters from olive oil: laccase versus syringic acid as bioremediation model

Laccase from Trametes versicolor was immobilized by diazotization on a nylon membrane grafted with glycidil methacrylate, using phenylenediamine as spacer and coupling agent. The behavior of these enzyme derivatives was studied under isothermal and nonisothermal conditions by using syringic acid as substrate, in view of the employment of these membranes in processes of detoxification of vegetation waters from olive oil mills. The pH and temperature dependence of catalytic activity under isothermal conditions has shown that these membranes can be usefully employed under extreme pH and temperatures. When employed under nonisothermal conditions, the membranes exhibited an increase of catalytic activity linearly proportional to the applied transmembrane temperature difference. Percentage activity increases ranging from 62% to 18% were found in the range of syringic acid concentration from 0.02 to 0.8 mM, when a difference of 1 degrees C was applied across the catalytic membrane. Because the percentage activity increase is strictly related to the reduction of the production times, the technology of nonisothermal bioreactors has been demonstrated to be an useful tool also in the treatment of vegetation waters from olive oil mills.     

Immobilization of thermostable β-glucosidase from Sulfolobus shibatae by cross-linking with transglutaminase

Thermostable β-glucosidase from Sulfolobus shibatae was immobilized on silica gel modified or not modified with 3-aminopropyl-triethoxysilane using transglutaminase as a cross-linking factor. Obtained preparations had specific activity of 3883 U/g of the support, when measured at 70 °C using o-nitrophenyl β-d-galactopyranoside (GalβoNp) as substrate. The highest immobilization yield of the enzyme was achieved at pH 5.0 in reaction media. The most active preparations of immobilized β-glucosidase were obtained at a transglutaminase concentration of 40 mg/ml at 50 °C. The immobilization was almost completely terminated after 100 min of the reaction and prolonged time of this process did not cause considerable changes of the activity of the preparations. The immobilization did not influence considerably on optimum pH and temperature of GalβoNp hydrolysis catalyzed by the investigated enzyme (98 °C, pH 5.5). The broad substrate specifity and properties of the thermostable β-glucosidase from S. shibatae immobilized on silica-gel indicate its suitability for hydrolysis of lactose during whey processing.     

An activating mutation in the γ1 subunit of the AMP-activated protein kinase

The AMP-activated protein kinase (AMPK) is a heterotrimeric protein composed of a catalytic subunit and two regulatory subunits, β and γ. The γ subunit is essential for enzyme activity by virtue of its binding to the C-terminus of the subunit and appears to play some role in the determination of AMP sensitivity. We demonstrate that a γ1R70Q mutation causes a marked increase in AMPK activity and renders it largely AMP-independent. This activation is associated with increased phosphorylation of the subunit activation loop T172. These in vitro characteristics of AMPK are also reflected in increased intracellular phosphorylation of one of its major substrates, acetyl-CoA carboxylase. These data illustrate the importance of the γ1 subunit in the regulation of AMPK and its modulation by AMP.     

Evidence for modulation of cell-to-cell electrical coupling by cAMP in mouse islets of Langerhans

The effects of forskolin on electrical coupling among pancreatic β-cells were studied. Two microelectrodes were used to measure membrane potentials simultaneously in pairs of islet β-cells. Intracellular injection of a current pulse (ΔI) elicited a membrane response ΔV₁ in the injected cell and also a response ΔV₂ in a nearby β-cell confirming the existence of cell-to-cell electrical coupling among islet β-cells. In the presence of glucose (7 mM), application of forskolin evoked a transient depolarization of the membrane and electrical activity suggesting that the drug induced a partial inhibition of the β-cell membrane K⁺ conductance. Concomitant with this depolarization of the membrane there was a marked decrease in β-cell input resistance (ΔV₂/ΔI) suggesting that exposure to forskolin enhanced intercellular coupling. Direct measurements of the coupling ratio ΔV₂/ΔV₁ provided further support to the idea that forskolin enhances electrical coupling among islet cells. Indeed, application of forskolin reversibly increased the coupling ratio. These results suggest that cAMP might be involved in the modulation of electrical coupling among islet β-cells.     

Incorporation of the antibacterial agent, miconazole nitrate into a cellulosic fabric grafted with β-cyclodextrin

The aim of the study was to investigate the incorporation of the antibacterial agent, miconazole nitrate into cyclodextrin cavities covalently bonded onto cloth fibers. The cellulosic fabric was grafted with β-cyclodextrin molecules through reaction with monochlorotriaziny β-cyclodextrin (MCT-β-CD). The suitable bonded reaction conditions were found to be MCT-β-CD 60–100 g/L, catalyst Na₂CO₃ 50–60 g/L, the reaction temperature 150–160 °C and the reaction time 5–8 min.

The modified and unmodified fabrics were characterized by UV spectrophotometry. The level of miconazole nitrate entrapped in the fabrics were determined by HPLC and was founded to be much higher (0.458% w/w) for the textile functionalized with MCT-β-CD compared to the unmodified fabric (0.056% w/w). The antibacterial abilities measured by shaker flask method showed that the antibacterial property was markedly enhanced by impregnation with miconazole nitrate of the MCT-β-CD grafted textile. The finished fabric kept the antibacterial abilities more than 70% even after washing 10 times, while the antibacterial activity of the unmodified textile was almost lost.     

Effect of gamma-ray on activity and stability of alcohol-dehydrogenase from Saccharomyces cerevisiae

The effect of γ-ray irradiation on alcohol-dehydrogenase activity of yeast was investigated. The results suggested that low doses of γ-ray (10 and 20 Gy) significantly increased the enzyme activity. This work also describes the impact of irradiation on immobilization efficiency of biocatalyst entrapped on to alginate gel beads. When yeast irradiated to a dose of 20 Gy was immobilized, ADH stability was improved up to 1.4 times at 45 °C compared to the immobilized non-irradiated cells. Also, the irradiated biocatalyst, when immobilized, can be reused more than eight times in oxidation reaction of ethanol. This preparation also permitted to reach high yields of immobilization (79%) and activity (88%).     

The F1-ATPase beta-subunit is the putative enterostatin receptor

It has been suggested that the F₁-ATPase β-subunit is the enterostatin receptor. We investigated the binding activity of the purified protein with a labeled antagonist, β-casomorphin_1–7, in the absence and presence of cold enterostatin. ¹²⁵I-β-casomorphin_1–7 weakly binds to the rat F₁-ATPase β-subunit. Binding was promoted by low concentrations of cold enterostatin but displaced by higher concentrations. To study the relationship between binding activity and feeding behavior, we examined the ability of a number of enterostatin analogs to affect β-casomorphin_1–7 binding to the F₁-ATPase β-subunit. Peptides that suppressed food intake promoted β-casomorphin_1–7 binding whereas peptides that stimulated food intake or did not affect the food intake displaced β-casomorphin_1–7 binding. Surface plasmon resonance measurements show that the β-subunit of F₁-ATPase binds immobilized enterostatin with a dissociation constant of 150 nM, where no binding could be detected for the assembled F₁-ATPase complex. Western blot analysis showed the F₁-ATPase β-subunit was present on plasma and mitochondrial membranes of rat liver and amygdala. The data provides evidence that the F₁-ATPase β-subunit is the enterostatin receptor and suggests that enterostatin and β-casomorphin_1–7 bind to distinct sites on the protein.     

Enzyme markers and isolation of the microvillar and perimicrovillar membranes of Dysdercus peruvianus (hemiptera: pyrrhocoridae) midgut cells

The midgut of Dysdercus peruvianus is divided into four sections (V₁-V₄). All the cells have microvilli ensheathed by a lipoprotein membrane (perimicrovillar membrane) extending toward the lumen as narrow tubes with dead ends. Subcellular fractionation of V₁ and V₂ tissue in isotonic and hypotonic conditions showed that -glucosidase is associated with membranous structures larger than those associated with β-glucosidase. The /β-glucosidase activity ratio is 34 ± 4 in V₁ tissue and 170 ± 10 in membranes recovered from the V₁ luminal contents. These membranes are resolved in sucrose gradients into low density (1.087 ± 0.001 g/cm³) -glucosidase-carrying membranes (/β-glucosidase activity ratio of 330±30) and high density (1.132 ± 0.002g/cm³) β-glucosidase-carrying-membranes. Low-density membranes have 1090 ± 60 μg lipid/mg protein and apparently are not contaminated by high-density ones (electron micrographs). SDS-polyacrylamide gel electrophoresis (SDS-PAGE) showed that membranes recovered from V₁ luminal contents are composed mainly of a-glucosidase-rich membranes. The data suggest that -glucosidase-rich membranes are perimicrovillar membranes which may be partly lost into luminal contents on dissection, with densities and lipid/protein ratios similar to that of myelin sheaths, in accordance with previous freeze-fracture data. β-Glucosidase-rich membranes are probably microvillar membranes with densities increased by the presence of associated portasomes.     

Enzymic Preparation of Benzyl β-D-Glucopyranoside

Benzyl β-D-glucopyranoside was prepared by an enzyme-catalysed direct reaction between D-glucose, or better cellobiose, and benzyl alcohol in the presence of a minimum amount of water. The enzyme β-glucosidase was used in the immobilized form (adsorbed onto macroporous polyethylene terephthalate or covalently bound on polyglycidyl methacrylate), enabling multiple application.