Zwitterionic phospholipids and sterols modulate antimicrobial peptide-induced membrane destabilization

Cationic amphipathic α-helical peptides preferentially disrupt anionic lipids in mixed model membranes, potentially causing a catastrophic release of the cell contents or attenuation of the membrane potential. The effective role of such peptides requires considerable discrimination between target and host cells, which is likely to occur at the level of the cell membrane. Here, we explore the roles of a variety of common membrane constituents in mediating the interaction between the antimicrobial peptide pleurocidin and model membranes. We employ intrinsic tryptophan fluorescence and circular dichroism to observe the effect of increasing concentrations of sterol in the membrane on peptide binding, using ²H solid-state NMR of chain deuterated lipids simultaneously to probe the effective chain disruption of the anionic phospholipid component of the membrane. We show that the degree of ordering of the lipid acyl chains in the membrane is dependent on the nature of the zwitterionic phospholipid headgroup in mixed anionic membranes. Furthermore, the presence of cholesterol and ergosterol increases acyl chain order in the liquid crystalline model membranes, but to differing degrees. Our results show how sterols can protect even negatively charged membranes from the disruptive effects of antimicrobial peptides, thereby providing a molecular view of the differences in sensitivity of various target membranes to linear cationic antibiotic peptides where bacteria (no sterols) are most susceptible, lower eukaryotes including fungi (containing ergosterol) exhibit an intermediate degree of sensitivity, and higher organisms (containing cholesterol) are largely resistant to antimicrobial peptides.     

Unraveling the mechanism of octenidine and chlorhexidine on membranes: Does electrostatics matter?

The increasing problem of antibiotic resistance in bacteria requires the development of new antimicrobial candidates. There are several well-known substances with commercial use, but their molecular mode of action is not fully understood. In this work, we focus on two commonly used antimicrobial agents from the detergent family—octenidine dichloride (OCT) and chlorhexidine digluconate (CHX). Both of them are reported to be agents selectively attacking the cell membrane through interaction inducing membrane disruption by emulsification. They are believed to present electrostatic selectivity toward charged lipids. In this study, we tested this hypothesis and revised previously proposed molecular mechanisms of action. Employing a variety of techniques such as molecular dynamics, ζ potential with dynamic light scattering, vesicle fluctuation spectroscopy, carboxyfluorescein leakage measurement, and fluorescence trimethylammonium-diphenylhexatriene- and diphenylhexatriene-based studies for determination of OCT and CHX membrane location, we performed experimental studies using two model membrane systems—zwitterionic PC and negatively charged PG (18:1/18:1):PC (16:0/18:1) 3:7, respectively. These studies were extended by molecular dynamics simulations performed on a three-component bacterial membrane model system to further test interactions with another negatively charged lipid, cardiolipin. In summary, our study demonstrated that detergent selectivity is far more complicated than supposed simple electrostatic interactions. Although OCT does disrupt the membrane, our results suggest that its primary selectivity was more linked to mechanical properties of the membrane. On the other hand, CHX did not disrupt membranes as a primary activity, nor did it show any sign of electrostatic selectivity toward negatively charged membranes at any stage of interactions, which suggests membrane disruption by influencing more discrete membrane properties.     

Structure-activity relationships of cecropin-like peptides and their interactions with phospholipid membrane

Cecropin A and papiliocin are novel 37-residue cecropin-like antimicrobial peptides isolated from insect. We have confirmed that papiliocin possess high bacterial cell selectivity and has an α-helical structure from Lys³ to Lys²¹ and from Ala²⁵ to Val³⁵, linked by a hinge region. In this study, we demonstrated that both peptides showed high antimicrobial activities against multi-drug resistant Gram negative bacteria as well as fungi. Interactions between these cecropin-like peptides and phospholipid membrane were studied using CD, dye leakage experiments, and NMR experiments, showing that both peptides have strong permeabilizing activities against bacterial cell membranes and fungal membranes as well as Trp² and Phe⁵ at the N-terminal helix play an important role in attracting cecropin-like peptides to the negatively charged bacterial cell membrane. Cecropin-like peptides can be potent peptide antibiotics against multi-drug resistant Gram negative bacteria and fungi. [BMB Reports 2013; 46(5): 282-287]     

From "carpet" mechanism to de-novo designed diastereomeric cell-selective antimicrobial peptides

Living organisms of all types produce a large repertoire of gene-encoded, net positively charged, antimicrobial peptides as part of their innate immunity to microbial invasion. Despite significant variations in composition, length and secondary structure most antimicrobial peptides are active in micromolar concentrations, suggesting a common general mechanism for their mode of action. Many antimicrobial peptides bind bacterial phospholipid membranes up to a threshold concentration, followed by membrane permeation/disintegration (the "carpet" mechanism). Recent data suggest that the details of the permeation pathways may vary for different peptides and are assigned to different modes of action. Accumulating data reveal that the molecular basis for cell selectivity is the ability of peptides to specifically bind the negatively charged bacterial membrane, as well as their oligomeric state in solution and in the membrane. Based on the "carpet" mechanism and the role of the peptide oligomeric state, a novel group of diastereomeric (containing D- and L-amino acids) antimicrobial peptides were developed. These peptides may serve as promising templates for the future designs of antimicrobial peptides.     

Unraveling the mechanism of octenidine and chlorhexidine on membranes: Does electrostatics matter?

The increasing problem of antibiotic resistance in bacteria requires the development of new antimicrobial candidates. There are several well-known substances with commercial use, but their molecular mode of action is not fully understood. In this work, we focus on two commonly used antimicrobial agents from the detergent family—octenidine dichloride (OCT) and chlorhexidine digluconate (CHX). Both of them are reported to be agents selectively attacking the cell membrane through interaction inducing membrane disruption by emulsification. They are believed to present electrostatic selectivity toward charged lipids. In this study, we tested this hypothesis and revised previously proposed molecular mechanisms of action. Employing a variety of techniques such as molecular dynamics, ζ potential with dynamic light scattering, vesicle fluctuation spectroscopy, carboxyfluorescein leakage measurement, and fluorescence trimethylammonium-diphenylhexatriene- and diphenylhexatriene-based studies for determination of OCT and CHX membrane location, we performed experimental studies using two model membrane systems—zwitterionic PC and negatively charged PG (18:1/18:1):PC (16:0/18:1) 3:7, respectively. These studies were extended by molecular dynamics simulations performed on a three-component bacterial membrane model system to further test interactions with another negatively charged lipid, cardiolipin. In summary, our study demonstrated that detergent selectivity is far more complicated than supposed simple electrostatic interactions. Although OCT does disrupt the membrane, our results suggest that its primary selectivity was more linked to mechanical properties of the membrane. On the other hand, CHX did not disrupt membranes as a primary activity, nor did it show any sign of electrostatic selectivity toward negatively charged membranes at any stage of interactions, which suggests membrane disruption by influencing more discrete membrane properties.     

Lactoferricin B causes depolarization of the cytoplasmic membrane of Escherichia coli ATCC 25922 and fusion of negatively charged liposomes

Antimicrobial peptides have been extensively studied in order to elucidate their mode of action. Most of these peptides have been shown to exert a bactericidal effect on the cytoplasmic membrane of bacteria. Lactoferricin is an antimicrobial peptide with a net positive charge and an amphipatic structure. In this study we examine the effect of bovine lactoferricin (lactoferricin B; Lfcin B) on bacterial membranes. We show that Lfcin B neither lyses bacteria, nor causes a major leakage from liposomes. Lfcin B depolarizes the membrane of susceptible bacteria, and induces fusion of negatively charged liposomes. Hence, Lfcin B may have additional targets responsible for the antibacterial effect.     

Investigating the cationic side chains of the antimicrobial peptide tritrpticin: hydrogen bonding properties govern its membrane-disruptive activities

The positively charged side chains of cationic antimicrobial peptides are generally thought to provide the initial long-range electrostatic attractive forces that guide them towards the negatively charged bacterial membranes. Peptide analogs were designed to examine the role of the four Arg side chains in the cathelicidin peptide tritrpticin (VRRFPWWWPFLRR). The analogs include several noncoded Arg and Lys derivatives that offer small variations in side chain length and methylation state. The peptides were tested for bactericidal and hemolytic activities, and their membrane insertion and permeabilization properties were characterized by leakage assays and fluorescence spectroscopy. A net charge of +5 for most of the analogs maintains their high antimicrobial activity and directs them towards preferential insertion into model bacterial membrane systems with a similar extent of burial of the Trp side chains. However the peptides exhibit significant functional differences. Analogs with methylated cationic side chains cause lower levels of membrane leakage and are associated with lower hemolytic activities, making them potentially attractive pharmaceutical candidates. Analogs containing the Arg guanidinium groups cause more membrane disruption than those containing the Lys amino groups. Peptides in the latter group with shorter side chains have increased membrane activity and conversely, elongating the Arg residue causes slightly higher membrane activity. Altogether, the potential for strong hydrogen bonding between the four positive Arg side chains with the phospholipid head groups seems to be a determinant for the membrane disruptive properties of tritrpticin and many related cationic antimicrobial peptides.     

Conformation of a bactericidal domain of puroindoline a: structure and mechanism of action of a 13-residue antimicrobial peptide

Puroindoline a, a wheat endosperm-specific protein containing a tryptophan-rich domain, was reported to have antimicrobial activities. We found that a 13-residue fragment of puroindoline a (FPVTWRWWKWWKG-NH(2)) (puroA) exhibits activity against both gram-positive and gram-negative bacteria. This suggests that puroA may be a bactericidal domain of puroindoline a. PuroA interacted strongly with negatively charged phospholipid vesicles and induced efficient dye release from these vesicles, suggesting that the microbicidal effect of puroA may be due to interactions with bacterial membranes. A variety of biophysical and biochemical methods, including fluorescence spectroscopy and microcalorimetry, were used to examine the mode of action of puroA. These studies showed that puroA is located at the membrane interface, probably due to its high content of Trp residues that have a high propensity to partition into the membrane interface. The penetration of these Trp residues in negatively charged phospholipid vesicles resembling bacterial membranes was more extensive than the penetration in neutral vesicles mimicking eukaryotic membranes. Peptide binding had a significant influence on the phase behavior of the former vesicles. The three-dimensional structure of micelle-bound puroA determined by two-dimensional nuclear magnetic resonance spectroscopy indicated that all the positively charged residues are oriented close to the face of Trp indole rings, forming energetically favorable cation-pi interactions. This characteristic, along with its well-defined amphipathic structure upon binding to membrane mimetic systems, allows puroA to insert more deeply into bacterial membranes and disrupt the regular membrane bilayer structure.     

FtsH-dependent processing of RNase colicins D and E3 means that only the cytotoxic domains are imported into the cytoplasm

It has long been suggested that the import of nuclease colicins requires protein processing; however it had never been formally demonstrated. Here we show that two RNase colicins, E3 and D, which appropriate two different translocation machineries to cross the outer membrane (BtuB/Tol and FepA/TonB, respectively), undergo a processing step inside the cell that is essential to their killing action. We have detected the presence of the C-terminal catalytic domains of these colicins in the cytoplasm of target bacteria. The same processed forms were identified in both colicin-sensitive cells and in cells immune to colicin because of the expression of the cognate immunity protein. We demonstrate that the inner membrane protease FtsH is necessary for the processing of colicins D and E3 during their import. We also show that the signal peptidase LepB interacts directly with the central domain of colicin D in vitro and that it is a specific but not a catalytic requirement for in vivo processing of colicin D. The interaction of colicin D with LepB may ensure a stable association with the inner membrane that in turn allows the colicin recognition by FtsH. We have also shown that the outer membrane protease OmpT is responsible for alternative and distinct endoproteolytic cleavages of colicins D and E3 in vitro, presumably reflecting its known role in the bacterial defense against antimicrobial peptides. Even though the OmpT-catalyzed in vitro cleavage also liberates the catalytic domain from colicins D and E3, it is not involved in the processing of nuclease colicins during their import into the cytoplasm.     

The role of electrostatics in colicin nuclease domain translocation into bacterial cells

The mechanism(s) by which nuclease colicins translocate distinct cytotoxic enzymes (DNases, rRNases, and tRNases) to the cytoplasm of Escherichia coli is unknown. Previous in vitro investigations on isolated colicin nuclease domains have shown that they have a strong propensity to associate with anionic phospholipid vesicles, implying that electrostatic interactions with biological membranes play a role in their import. In the present work we set out to test this hypothesis in vivo. We show that cell killing by the DNase toxin colicin E9 of E. coli HDL11, a strain in which the level of anionic phospholipid and hence inner membrane charge is regulated by isopropyl beta-D-thiogalactopyranoside induction, is critically dependent on the level of inducer, whereas this is not the case for pore-forming colicins that take the same basic route into the periplasm. Moreover, there is a strong correlation between the level and rate of HDL11 cell killing and the net positive charge on a colicin DNase, with similar effects seen for wild type E. coli cells, data that are consistent with a direct, electrostatically mediated interaction between colicin nucleases and the bacterial inner membrane. We next sought to identify how membrane-associated colicin nucleases might be translocated into the cell. We show that neither the Sec or Tat systems are involved in nuclease colicin uptake but that nuclease colicin toxicity is instead dependent on functional FtsH, an inner membrane AAA(+) ATPase and protease that dislocates misfolded membrane proteins to the cytoplasm for destruction.     

Conformational changes of urea-denatured colicin E1 induced by phospholipid membranes.

The membrane insertion of urea-denatured colicin E1 was studied by using fluorescence spectroscopy, circular dichroism and monolayer techniques. The results showed that the denatured colicin E1 taking mainly the 'random coil' conformation may recover its orderliness to a certain extent under the induction of the phospholipid membrane and insert spontaneously into phospholipid membrane, indicating that unfolding of colicin E1 does not inhibit its membrane insertion. Among the four tryptophan residues of the membrane-bound colicin E1 molecules, at least two were accessible by the quenchers, i.e. not inserted into the membranes. Although urea-denatured colicin E1 interacted preferentially with negatively charged phospholipids, it seems less dependent on the negatively charged lipid than colicin A. The addition of urea increased the speed of the adsorption of colicin E1 to the membrane, but did not affect obviously its membrane insertion ability.     

Lipopolysaccharides in bacterial membranes act like cholesterol in eukaryotic plasma membranes in providing protection against melittin-induced bilayer lysis

Melittin is a small, cationic peptide that, like many other antimicrobial peptides, lyses cell membranes by acting on their lipid bilayers. However, the sensitivity to antimicrobial peptides varies among cell types. We have performed direct binding and vesicle leakage experiments to determine the sensitivity to melittin of bilayers composed of various physiologically relevant lipids, in particular, key components of eukaryotic membranes (cholesterol) and bacterial outer membranes (lipopolysaccharide or LPS). Melittin binds to bilayers composed of both zwitterionic and negatively charged phospholipids, as well as to the highly charged LPS bilayers. The magnitude of the free energy of binding (deltaG degrees ) increases with increasing bilayer charge density; deltaG degrees = -7.6 kcal/mol for phosphatidylcholine (PC) bilayers and -8.9 to -11.0 kcal/mol for negatively charged bilayers containing phosphatidylserine (PS), phospholipids with covalently attached polyethylene glycol (PEG-lipids), or LPS. Comparisons of these data show that binding is not markedly affected by the steric barrier produced by the PEG in PEG-lipids or by the polysaccharide core of LPS. The addition of equimolar cholesterol to PC bilayers reduces the level of binding (deltaG degrees = -6.4 kcal/mol) and reduces the extent of melittin-induced leakage by 20-fold. LPS and 1:1 PC/cholesterol bilayers have similar high resistance to melittin-induced leakage, indicating that cholesterol in eukaryotic plasma membranes and LPS in Gram-negative bacteria provide strong protection against the lytic effects of melittin. We argue that this resistance is due at least in part to the similar tight packing of the lipid acyl chains in PC/cholesterol and LPS bilayers. The addition of bacterial phospholipids to LPS bilayers increases their sensitivity to melittin, helping to explain the higher sensitivity of deep rough bacteria compared to smooth phenotypes.     

The interaction of cationic antimicrobial peptides with vesicles containing synthetic glycolipids as models of the outer membrane of gram-negative bacteria.

Two simple lipid A analogues methyl 2,3-di-O-tetradecanoyl-alpha-D-glucopyranoside (GL1) and methyl 2,3-di-O-tetradecanoyl-alpha-D-glucopyranoside 4-O-phosphate (GL2) were synthesized and used for preparing mixed phosphocholine vesicles as models of the outer membrane of gram-negative bacteria. The interaction of these model membranes with magainin 2, a representative of the alpha-helical membrane active peptides, and apidaecin Ib and drosocin, two insect Pro-rich peptides which do not act at the level of the cellular membrane, were studied by CD and dye-releasing experiments. The CD spectra of apidaecin Ib and drosocin in the presence of GL1- or GL2-containing vesicles were consistent with largely unordered structures, whereas, according to the CD spectra, magainin 2 adopted an amphipathic alpha-helical conformation, particularly in the presence of negatively charged bilayers. The ability of the peptides to fold into amphipathic conformations was strictly correlated to their ability to bind and to permeabilize phospholipid as well as glycolipid membranes. Apidaecin Ib and drosocin, which are unable to adopt an amphipathic structure, showed negligible dye-leakage activity even in the presence of GL2-containing vesicles. It is reasonable to suppose that, as for the killing mechanism, the two classes of antimicrobial peptides follow different patterns to cross the bacterial outer membrane.     

Dual Action of BPC194: A Membrane Active Peptide Killing Bacterial Cells

Membrane active peptides can perturb the lipid bilayer in several ways, such as poration and fusion of the target cell membrane, and thereby efficiently kill bacterial cells. We probe here the mechanistic basis of membrane poration and fusion caused by membrane-active, antimicrobial peptides. We show that the cyclic antimicrobial peptide, BPC194, inhibits growth of Gram-negative bacteria and ruptures the outer and inner membrane at the onset of killing, suggesting that not just poration is taking place at the cell envelope. To simplify the system and to better understand the mechanism of action, we performed Förster resonance energy transfer and cryogenic transmission electron microscopy studies in model membranes and show that the BPC194 causes fusion of vesicles. The fusogenic action is accompanied by leakage as probed by dual-color fluorescence burst analysis at a single liposome level. Atomistic molecular dynamics simulations reveal how the peptides are able to simultaneously perturb the membrane towards porated and fused states. We show that the cyclic antimicrobial peptides trigger both fusion and pore formation and that such large membrane perturbations have a similar mechanistic basis.     

Substitution of the leucine zipper sequence in melittin with peptoid residues affects self-association, cell selectivity, and mode of action

Melittin (ME), a non-cell-selective antimicrobial peptide, contains the leucine zipper motif, wherein every seventh amino acid is leucine or isolucine. Here, we attempted to generate novel cell-selective peptides by substituting amino acids in the leucine zipper sequence of ME with peptoid residues. We generated a series of ME analogues by replacing Leu-6, Lue-13 and Ile-20 with Nala, Nleu, Nphe, or Nlys, and we examined their secondary structure, self-association activity, cell selectivity and mode of action. Circular dichroism spectroscopy indicated that the substitutions disrupt the α-helical structure of ME in micelles of sodium dodecyl sulfate and on negatively charged and zwitterionic phospholipid vesicles. Substitution by Nleu, Nphe, or Nlys but not Nala disturbed the self-association in an aqueous environment, interaction with zwitterionic membranes, and toxicity to mammalian cells of ME but did not affect the interaction with negatively charged membranes or antibacterial activity. Notably, peptides with Nphe or Nlys substitution had the highest therapeutic indices, consistent with their lipid selectivity. In addition, all of peptoid residue-containing ME analogues had little or no ability to induce membrane disruption, membrane depolarization and lipid flip-flop. Taken together, our studies indicate that substitution of the leucine zipper motif in ME with peptoid residues increases its selectivity against bacterial cells by impairing self-association activity and changes its mode of antibacterial action from membrane-targeting mechanism to possible intracellular targeting mechanism. Furthermore, our ME analogues especially those with Nleu, Nphe, or Nlys substitutions, may be therapeutically useful antimicrobial peptides.     

Aggregation of cateslytin beta-sheets on negatively charged lipids promotes rigid membrane domains. A new mode of action for antimicrobial peptides?

Cateslytin, a positively charged (5+) arginine-rich antimicrobial peptide (bCgA, RSMRLSFRARGYGFR), was chemically synthesized and studied against membranes that mimic bacterial or mammalian systems. Circular dichroism, polarized attenuated total reflection infrared spectroscopy, (1)H high-resolution MAS NMR, and (2)H and (31)P solid state NMR were used to follow the interaction from peptide and membrane points of view. Cateslytin, which is unstructured in solution, is converted into antiparallel beta-sheets that aggregate mainly flat at the surface of negatively charged bacterial mimetic membranes. Arginine residues are involved in the binding to negatively charged lipids. Following the interaction of the cateslytin peptide, rigid and thicker membrane domains enriched in negatively charged lipids are found. Much less interaction is detected with neutral mammalian model membranes, as reflected by only minor percentages of beta-sheets or helices in the peptide secondary structure. No membrane destruction was detected for both bacterial and mammalian model membranes. A molecular model is proposed in which zones of different rigidity and thickness bring about phase boundary defects that ultimately lead to permeability induction and peptide crossing through bacterial membranes.     

Effects of Pro --> peptoid residue substitution on cell selectivity and mechanism of antibacterial action of tritrpticin-amide antimicrobial peptide

To investigate the effect of Pro --> peptoid residue substitution on cell selectivity and the mechanism of antibacterial action of Pro-containing beta-turn antimicrobial peptides, we synthesized tritrpticin-amide (TP, VRRFPWWWPFLRR-NH(2)) and its peptoid residue-substituted peptides in which two Pro residues at positions 5 and 9 are replaced with Nleu (Leu peptoid residue), Nphe (Phe peptoid residue), or Nlys (Lys peptoid residue). Peptides with Pro --> Nphe (TPf) or Pro --> Nleu substitution (TPl) retained antibacterial activity but had significantly higher toxicity to mammalian cells. In contrast, Pro --> Nlys substitution (TPk) increased the antibacterial activity but decreased the toxicity to mammalian cells. Tryptophan fluorescence studies indicated that the bacterial cell selectivity of TPk is closely correlated with a preferential interaction with negatively charged phospholipids. Interestingly, TPk was much less effective at depolarizing of the membrane potential of Staphylococus aureus and Escherichia coli spheroplasts and causing the leakage of a fluorescent dye entrapped within negatively charged vesicles. Furthermore, confocal laser-scanning microscopy showed that TPk effectively penetrated the membrane of both E. coli and S. aureus and accumulated in the cytoplasm, whereas TP and TPf did not penetrate the cell membrane but remained outside or on the cell membrane. These results suggest that the bactericidal action of TPk is due to inhibition of the intracellular components after penetration of the bacterial cell membrane. In addition, TPK with Lys substitution effectively depolarized the membrane potential of S. aureus and E. coli spheroplasts. TPK induced rapid and effective dye leakage from bacterial membrane-mimicking liposomes and did not penetrate the bacterial cell membranes. These results suggested that the ability of TPk to penetrate the bacterial cell membranes appears to involve the dual effects that are related to the increase in the positive charge and the peptide's backbone change by peptoid residue substitution. Collectively, our results showed that Pro --> Nlys substitution in Pro-containing beta-turn antimicrobial peptides is a promising strategy for the design of new short bacterial cell-selective antimicrobial peptides with intracellular mechanisms of action.     

The role of the central L- or D-Pro residue on structure and mode of action of a cell-selective alpha-helical IsCT-derived antimicrobial peptide

IsCT-P (ILKKIWKPIKKLF-NH2) is a novel alpha-helical antimicrobial peptide with bacterial cell selectivity designed from a scorpion-derived peptide IsCT. To investigate the role of L- or D-Pro kink on the structure and the mode of action of a short alpha-helical antimicrobial peptide with bacterial cell selectivity, we synthesized IsCT-p, in which D-Pro is substituted for L-Pro8 of IsCT-P. CD spectra revealed that IsCT-P adopted a typical alpha-helical structure in various membrane-mimicking conditions, whereas IsCT-p showed a random structure. This result indicated that D-Pro in the central position of a short alpha-helical peptide provides more remarkable structural flexibility than L-Pro. Despite its higher antibacterial activity, IsCT-p was much less effective at inducing dye leakage in the negatively charged liposome mimicking bacterial membrane and induced no or little membrane potential depolarization of Staphylococcus aureus. Confocal laser scanning microscopy showed that IsCT-p penetrated the bacterial cell membrane and accumulated in the cytoplasm, whereas IsCT-P remained outside or on the cell membrane. These results suggested that the major target of IsCT-P and IsCT-p is the bacterial membranes and intracellular components, respectively. Collectively, our results demonstrated that the central D-Pro kink in alpha-helical antimicrobial peptides plays an important role in penetrating bacterial membrane as well as bacterial cell selectivity.     

Basis for selectivity of cationic antimicrobial peptides for bacterial versus mammalian membranes

Novel cationic antimicrobial peptides typified by structures such as KKKKKKAAXAAWAAXAA-NH2, where X = Phe/Trp, and several of their analogues display high activity against a variety of bacteria but exhibit no hemolytic activity even at high dose levels in mammalian erythrocytes. To elucidate their mechanism of action and source of selectivity for bacterial membranes, phospholipid mixtures mimicking the compositions of natural bacterial membranes (containing anionic lipids) and mammalian membranes (containing zwitterionic lipids + cholesterol) were challenged with the peptides. We found that peptides readily inserted into bacterial lipid mixtures, although no insertion was detected in model "mammalian" membranes. The depth of peptide insertion into model bacterial membranes was estimated by Trp fluorescence quenching using doxyl groups variably positioned along the phospholipid acyl chains. Peptide antimicrobial activity generally increased with increasing depth of peptide insertion. The overall results, in conjunction with molecular modeling, support an initial electrostatic interaction step in which bacterial membranes attract and bind peptide dimers onto the bacterial surface, followed by the "sinking" of the hydrophobic core segment to a peptide sequence-dependent depth of approximately 2.5-8 A into the membrane, largely parallel to the membrane surface. Antimicrobial activity was likely enhanced by the fact that the peptide sequences contain AXXXA sequence motifs, which promote their dimerization, and possibly higher oligomerization, as assessed by SDS-polyacrylamide gel analysis and fluorescence resonance energy transfer experiments. The high selectivity of these peptides for nonmammalian membranes, combined with their activity toward a wide spectrum of Gram-negative and Gram-positive bacteria and yeast, while retaining water solubility, represent significant advantages of this class of peptides.     

On the role of lipid in colicin pore formation

Insights into the protein-membrane interactions by which the C-terminal pore-forming domain of colicins inserts into membranes and forms voltage-gated channels, and the nature of the colicin channel, are provided by data on: (i) the flexible helix-elongated state of the colicin pore-forming domain in the fluid anionic membrane interfacial layer, the optimum anionic surface charge for channel formation, and voltage-gated translocation of charged regions of the colicin domain across the membrane; (ii) structure-function data on the voltage-gated K(+) channel showing translocation of an arginine-rich helical segment through the membrane; (iii) toroidal channels formed by small peptides that involve local participation of anionic lipids in an inverted phase. It is proposed that translocation of the colicin across the membrane occurs through minimization of the Born charging energy for translocation of positively charged basic residues across the lipid bilayer by neutralization with anionic lipid head groups. The resulting pore structure may consist of somewhat short, ca. 16 residues, trans-membrane helices, in a locally thinned membrane, together with surface elements of inverted phase lipid micelles.