Thermally induced proliferation of pores in a model fluid membrane.

The growth of thermally induced pores in a two-dimensional model fluid membrane is investigated by Monte Carlo simulation. Holes appear in the membrane via an activated process, and their subsequent growth is controlled by an edge energy per unit length or line tension. The barrier height and line tension, together with a lateral tension, are the independent parameters of the model. In the resulting phase diagram, a rupture transition separates an intact membrane from a disintegrated state. The approach to the ruptured state shows distinct regimes. Reducing the barrier height at large line tension produces multiple, quasi-independent, small holes whose behavior is dominated by their edge energy, whereas at lower line tensions shape fluctuations of the holes facilitate their coalescence into a single large hole. At a small value of line tension and large barrier height, a single hole spontaneously permeabilizes the membrane in an entropically driven phase transition. Entropy dominates pore growth for line tensions not far below those measured for artificial vesicles. Permeabilization of lipid bilayers by certain peptides involves perturbing lipid-lipid cohesive energies, and our simulations show that at small line tensions the entropy of hole shape fluctuations destroys the model membrane's stability.     

Mimicking a cytoskeleton by coupling poly(N-isopropylacrylamide) to the inner leaflet of liposomal membranes: effects of photopolymerization on vesicle shape and polymer architecture

Networks of N-isopropylacrylamide (NIPAM) copolymers, coupled to spherical phospholipid bilayers, are suitable as a model for the study of the interaction between the cytoskeleton and cellular membranes, as well as for promising new drug delivery systems with triggerable drug release properties and improved stability. In this article, we describe a simple preparation technique for liposomes from egg phosphatidyl choline (EPC) encapsulating a cross-linked NIPAMminus signTEGDM copolymer skeleton (tetraethylene glycol dimethacrylate, TEGDM) which is coupled only to the inner monolayer by a novel membrane anchor monomer. Polymerization in the lipid vesicles was initiated at the inner membrane surface by the radical initiator 2,2-diethoxy-acetophenone (DEAP) permeating through the membrane from the outside. The effects of photopolymerization and polymer formation on vesicle shape and membrane integrity were studied by transmission electron microscopy (TEM), cryo-TEM, and atomic force microscopy (AFM). Upon UV irradiation, approximately 100% of the vesicles contained a polymer gel and only occasional changes in the spherical shape of the liposomes were observed. The architecture of the polymer network inside the liposomal compartment was determined by the conditions of the photopolymerization. Composite structures of polymer hollow spheres or solid spheres, respectively, tethered to spherical membrane vesicles were produced. The increased stability of the polymer-tethered lipid bilayers against solubilization by sodium cholate, compared to pure EPC vesicles, was determined by radiolabeling the lipid membrane.     

Biomimetic lipid/polymer colorimetric membranes: molecular and cooperative properties

Characterization of membranes and of biological processes occurring within membranes is essential for understanding fundamental cellular behavior. Here we present a detailed biophysical study of a recently developed colorimetric biomimetic membrane assembly constructed from physiological lipid molecules and conjugated polydiacetylene. Various analytical techniques have been applied to characterize the organization of the lipid components in the chromatic vesicles and their contributions to the observed blue-to-red color transitions. Experiments reveal that both the polymerized units as well as the lipids exhibit microscopic phases and form domains whose properties and bilayer organization are interdependent. These domains are interspersed within mixed lipid/polymer vesicles that have a size distribution different from those of aggregates of the individual molecular constituents. The finding that fluidity changes induced within the lipid domains are correlated with the chromatic transitions demonstrates that the colorimetric platform can be used to evaluate the effects of individual molecular components, such as negatively charged lipids and cholesterol, upon membrane fluidity and thermal stability.     

Interaction between DMPC liposomes and HM-PNIPAM polymer

The interactions of hydrophobically-modified poly-(N-isopropylacrylamides) (HM-PNIPAM) and dimyristoylphosphatidylcholine (DMPC) vesicles were investigated by the effect of the polymer on the binding of a fluorescent dye, oxonol VI, to DMPC vesicles, and on its diffusion across the membrane. On mixing with the vesicles, the dye exhibits an increase in fluorescence, which occurs in a two-stage process. The process was monitored by stopped-flow fluorescence spectrophotometry. According to the dependence of the reciprocal relaxation time on vesicle concentration, the rapid stage seems to be due to the second-order binding of the dye to the lipid membrane, a process that is almost diffusion-controlled, whereas the slow process is attributed to movement of the dye within the membrane phase. The polymer did not significantly affect the rate constant of the binding step, but it slowed down slightly the dissociation process of the dye from the membrane. However, the polymer affected the second stage, causing an increase in the reciprocal of its relaxation time, which suggests that the polymer makes the vesicle membrane more fluid.     

Low pH induced membrane fusion of lipid vesicles containing proton-sensitive polymer

For the purpose of cytoplasmic delivery of aqueous content in liposomes through endosomes, we synthesized a pH-sensitive polymer, cetylacetyl(imidazol-4-ylmethyl)polyethylenimine (CAIPEI), which generates polycations at acidic pH. CAIPEI in its aqueous phase caused aggregation of sonicated vesicles composed of phosphatidylserine (PS) and phosphatidylcholine (PC) (molar ratio 1:4) when the pH of the solution was lowered. The polymer also induced membrane intermixing as measured by resonance energy transfer between vesicles containing N-(7-nitro-2,1,3-benz[d]oxadiazol-4-yl)phosphatidylethanolamine and those containing N-Rhodamine phosphatidylethanolamine at pH 4-5, while the addition of CAIPEI caused neither aggregation of PC vesicles nor the intermixing of liposomal membranes between PC and PC/PS vesicles at any pH. The CAIPEI-induced membrane intermixing was dependent on the polymer/vesicle ratio rather than on the polymer concentration. Then the polymer was incorporated into the bilayers of PC vesicles. These CAIPEI vesicles also caused membrane intermixing with liposomes containing PS under acidic conditions. The reconstituted CAIPEI did not reduce the trapping efficiency of vesicles or increase their permeability to glucose even at low pH. The vesicles caused the low pH induced aggregation and membrane intermixing with other negatively charged liposomes containing phosphatidic acid or phosphatidylglycerol. These results suggest that the protonation of the polymer at acidic pH endows the CAIPEI vesicles with the activity to fuse with negatively charged liposomes.     

Pressure tuning of the morphology of heterogeneous lipid vesicles: a two-photon-excitation fluorescence microscopy study

We used a technique that allows us to visualize local and morphological changes of the membrane of more component giant unilamellar vesicles due to high pressure perturbation. Under these conditions, thermally induced processes are largely suppressed, and the bending rigidity and line tension are influenced by pressure-induced changes in lipid molecular packing and shape only. We studied the effect of pressure on the lateral organization and morphology of the model raft system DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine)/sphingomyelin/cholesterol as well as of the fluid mixture POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine)/DLPC (1,2-dilauroyl-sn-glycero-3-phosphocholine) by two-photon excitation fluorescence microscopy. The pressure-dependent experiments were carried out using a sample cell made from a thin fused silica capillary. The use of Laurdan as fluorescence label allowed us to also follow the lipid phase state by calculating the generalized polarization (GP) values of the vesicles and extracting their average value. During the compression cycle, a reduction in the volume of the vesicles is observed, accompanied by an increase of the average GP value, indicating an increasingly tighter packing of the lipids. Interestingly, the two systems studied show phenomena of budding and fission, and these at surprisingly low pressures of 200-300 bar. Moreover, these budding processes are not directly related to phase transitions to an overall ordered conformational state of the lipid membrane, which occur at much higher pressures. The topological changes of the lipid vesicles are irreversible and exhibit a different behavior depending on whether the pressure is increased or decreased. The results are discussed in light of the various contributions to the free energy functional of lipid vesicles. Finally, the biological relevance of these studies is highlighted.     

Diffusion behavior of lipid vesicles in entangled polymer solutions.

Dynamic light scattering was used to follow the tracer diffusion of phospholipid/cholesterol vesicles in aqueous polyacrylamide solutions and compared with the diffusive behavior of polystyrene (PS) latex spheres of comparable diameters. Over the range of the matrix concentration examined (Cp = 0.1-10 mg/ml), the diffusivities of the PS spheres and the large multilamellar vesicles exhibited the Stokes-Einstein (SE) relation, while the diffusivity of the unilamellar vesicles did not follow the increase of the solution's viscosity caused by the presence of the matrix molecules. The difference between the diffusion behaviors of unilamellar vesicles and hard PS spheres of similar size is possibly due to the flexibility of the lipid bilayer of the vesicles. The unilamellar vesicles are capable of changing their shape to move through the entangled polymer solution so that the hindrance to their diffusion due to the presence of the polymer chains is reduced, while the rigid PS spheres have little flexibility and they encounter greater resistance. The multilamellar vesicles are less flexible, thus their diffusion is similar to the hard PS spheres of similar diameter.     

Domain nucleation rates and interfacial line tensions in supported bilayers of ternary mixtures containing galactosylceramide

Domains within the plane of the plasma membrane, referred to as membrane rafts, have been a topic of considerable interest in the field of membrane biophysics. Although model membrane systems have been used extensively to study lipid phase behavior as it relates to the existence of rafts, very little work has focused on either the initial stage of lipid domain nucleation, or the relevant physical parameters such as temperature and interfacial line tension which control nucleation. In this work, we utilize a method in which the kinetic process of lipid domain nucleation is imaged by atomic force microscopy and modeled using classical theory of nucleation to map interfacial line tension in ternary lipid mixtures. These mixtures consist of a fluid phase lipid component (1,2-dilauroyl-sn-glycero-3-phosphocholine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, or 1,2-dioleoyl-sn-glycero-3-phosphocholine), a solid phase component (galactosylceramide), and cholesterol. Interfacial line tension measurements of galactosylceramide-rich domains track with our previously measured area/perimeter ratios and height mismatches measured here. Line tension also follows known trends in cholesterol interactions and partitioning, as we observed previously with area/perimeter ratios. Our line tension measurements are discussed in combination with recent line tension measurements to address line tension regulation by cholesterol and the dynamic nature of membrane rafts.     

Physical Properties of Escherichia coli Spheroplast Membranes

We investigated the physical properties of bacterial cytoplasmic membranes by applying the method of micropipette aspiration to Escherichia coli spheroplasts. We found that the properties of spheroplast membranes are significantly different from that of laboratory-prepared lipid vesicles or that of previously investigated animal cells. The spheroplasts can adjust their internal osmolality by increasing their volumes more than three times upon osmotic downshift. Until the spheroplasts are swollen to their volume limit, their membranes are tensionless. At constant external osmolality, aspiration increases the surface area of the membrane and creates tension. What distinguishes spheroplast membranes from lipid bilayers is that the area change of a spheroplast membrane by tension is a relaxation process. No such time dependence is observed in lipid bilayers. The equilibrium tension-area relation is reversible. The apparent area stretching moduli are several times smaller than that of stretching a lipid bilayer. We conclude that spheroplasts maintain a minimum surface area without tension by a membrane reservoir that removes the excessive membranes from the minimum surface area. Volume expansion eventually exhausts the membrane reservoir; then the membrane behaves like a lipid bilayer with a comparable stretching modulus. Interestingly, the membranes cease to refold when spheroplasts lost viability, implying that the membrane reservoir is metabolically maintained.     

Correction

We investigated the physical properties of bacterial cytoplasmic membranes by applying the method of micropipette aspiration to Escherichia coli spheroplasts. We found that the properties of spheroplast membranes are significantly different from that of laboratory-prepared lipid vesicles or that of previously investigated animal cells. The spheroplasts can adjust their internal osmolality by increasing their volumes more than three times upon osmotic downshift. Until the spheroplasts are swollen to their volume limit, their membranes are tensionless. At constant external osmolality, aspiration increases the surface area of the membrane and creates tension. What distinguishes spheroplast membranes from lipid bilayers is that the area change of a spheroplast membrane by tension is a relaxation process. No such time dependence is observed in lipid bilayers. The equilibrium tension-area relation is reversible. The apparent area stretching moduli are several times smaller than that of stretching a lipid bilayer. We conclude that spheroplasts maintain a minimum surface area without tension by a membrane reservoir that removes the excessive membranes from the minimum surface area. Volume expansion eventually exhausts the membrane reservoir; then the membrane behaves like a lipid bilayer with a comparable stretching modulus. Interestingly, the membranes cease to refold when spheroplasts lost viability, implying that the membrane reservoir is metabolically maintained.     

Membrane fusion due to dehydration by polyethylene glycol, dextran, or sucrose

To determine whether polyethylene glycol (PEG) causes growth of liposomes by affecting them directly or indirectly, vesicles composed of phosphatidylcholine were exposed to increasing concentrations of Mr 15 000-20 000 PEG or Mr 40 000 dextran either by direct mixing or across a dialysis membrane. After incubation at room temperature and dilution below at least 5% (w/w) polymer, the vesicles were monitored for fluorescence energy transfer and for absorbance at 400 nm. PEG induced the same levels of dequenching or lipid mixing and increased turbidity, regardless of whether the vesicles had been mixed directly with or dialyzed against PEG. These changes occurred within 5-15 min of polymer application. It is concluded that the increased lipid mixing and/or increased turbidity, indicating vesicle growth, resulted from an indirect effect of PEG on the vesicles--most likely dehydration. Dextran, in contrast to PEG, induced less dequenching and/or less turbidity increase when vesicles were directly mixed with, as opposed to dialyzed against, dextran. Although dextran not in contact with vesicles and with osmotic activity comparable to PEG was able to cause a degree of membrane fusion similar to that of PEG, therefore, the dehydrating effect of dextran could be mitigated if it were allowed to interact with vesicles. In further support of membrane dehydration as a precursor to membrane fusion, lipid mixing among sonicated and sonicated, frozen-thawed vesicles dialyzed against sucrose increased as a function of sucrose concentration. Vesicle morphology generally determined the maximal degree of membrane fusion inducible by the polymers.(ABSTRACT TRUNCATED AT 250 WORDS)     

Chained vesicles in vascular endothelial cells.

There is extensive ultrastructural evidence in endothelium for the presence of chained vesicles or clusters of attached vesicles, and they are considered to be involved in specific transport mechanisms, such as the formation of trans-endothelial channels. However, few details are known about their mechanical characteristics. In this study, the formation mechanism and mechanical aspects of vascular endothelial chained vesicles are investigated theoretically, based on membrane bending strain energy analysis. The shape of the axisymmetric vesicles was computed on the assumption that the cytoplasmic side of the vesicle has a molecular layer or cytoskeleton attached to the lipid bilayer, which induces a spontaneous curvature in the resting state. The bending strain energy is the only elasticity involved, while the shear elasticity is assumed to be negligible. The surface area of the membrane is assumed to be constant due to constant lipid bilayer thickness. Mechanically stable shapes of chained vesicles are revealed, in addition to a cylindrical tube shape. Unfolding of vesicles into a more flattened shape is associated with increase in bending energy without a significant increase in membrane tension. These results provide insights into the formation mechanism and mechanics of the chained vesicle.     

Lowering line tension with high cholesterol content induces a transition from macroscopic to nanoscopic phase domains in model biomembranes

Chemically simplified lipid mixtures are used here as models of the cell plasma membrane exoplasmic leaflet. In such models, phase separation and morphology transitions controlled by line tension in the liquid-disordered (Ld)?+?liquid-ordered (Lo) coexistence regime have been described [1]. Here, we study two four-component lipid mixtures at different cholesterol fractions: brain sphingomyelin (BSM) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC)/1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/cholesterol (Chol). On giant unilamellar vesicles (GUVs) display a nanoscopic-to-macroscopic transition of Ld?+?Lo phase domains as POPC is replaced by DOPC, and this transition also depends on the cholesterol fraction. Line tension decreases with increasing cholesterol mole fractions in both lipid mixtures. For the ternary BSM/DOPC/Chol mixture, the published phase diagram [19] requires a modification to show that when cholesterol mole fraction is >~0.33, coexisting phase domains become nanoscopic.     

Promotion of acid-induced membrane fusion by basic peptides. Amino acid and phospholipid specificities

The ability of oligo- and polymers of the basic amino acids L-lysine, L-arginine, L-histidine and L-ornithine to induce lipid intermixing and membrane fusion among vesicles containing various anionic phospholipids has been investigated. Among vesicle consisting of either phosphatidylinositol or mixtures of phosphatidic acid and phosphatidylethanolamine rapid and extensive lipid intermixing, but not complete fusion, was induced at neutral pH by poly-L-ornithine or L-lysine peptides of five or more residues. When phosphatidylcholine was included in the vesicles, the lipid intermixing was severely inhibited. Such lipid intermixing was also much less pronounced among phosphatidylserine vesicles. Poly-L-arginine provoked considerable leakage from the various anionic vesicles and caused significantly less lipid intermixing than L-lysine peptides at neutral pH. When the addition of basic amino acid polymer was followed by acidification to pH 5-6, vesicle fusion was induced. Fusion was more pronounced among vesicles containing phosphatidylserine or phosphatidic acid than among those containing phosphatidylinositol, and occurred also with vesicles whose composition resembles that of cellular membranes (i.e., phosphatidylcholine/phosphatidylethanolamine/phosphatidylserine, 50:30:20, by mol). Liposomes with this composition are resistant to fusion by Ca2+ or by acidification after lectin-mediated contact. The tight interaction among vesicles at neutral pH, resulting in lipid intermixing, does not seem to be necessary for the fusion occurring after acidification, but the basic peptides nevertheless appear to play a more active role in the fusion process than simply bringing the vesicles in contact. However, protonation of the polymer side chains and transformation of the polymer into a polycation does not explain the need for acidification, since the pH-dependence was quite similar for poly(L-histidine)- and poly(L-lysine)-mediated fusion.     

Toward a Better Raft Model: Modulated Phases in the Four-Component Bilayer,DSPC/DOPC/POPC/CHOL

The liquid-liquid (Ld + Lo) coexistence region within a distearoyl-phosphatidylcholine/dioleoyl-phosphatidylcholine/palmitoyl-oleoyl-phosphatidylcholine/cholesterol (DSPC/DOPC/POPC/CHOL) mixture displays a nanoscopic-to-macroscopic transition of phase domains as POPC is replaced by DOPC. Previously, we showed that the transition goes through a modulated phase regime during this replacement, in which patterned liquid phase morphologies are observed on giant unilamellar vesicles (GUVs). Here, we describe a more detailed investigation of the modulated phase regime along two different thermodynamic tielines within the Ld + Lo region of this four-component mixture. Using fluorescence microscopy of GUVs, we found that the modulated phase regime occurs at relatively narrow DOPC/(DOPC+POPC) ratios. This modulated phase window shifts to higher values of DOPC/(DOPC+POPC) when CHOL concentration is increased, and coexisting phases become closer in properties. Monte Carlo simulations reproduced the patterns observed on GUVs, using a competing interactions model of line tension and curvature energies. Sufficiently low line tension and high bending moduli are required to generate stable modulated phases. Altogether, our studies indicate that by tuning the lipid composition, both the domain size and morphology can be altered drastically within a narrow composition space. This lends insight into a possible mechanism whereby cells can reorganize plasma membrane compartmentalization simply by tuning the local membrane composition or line tension.     

Cell membrane hybrid bilayers containing the G-protein-coupled receptor CCR5

A hybrid bilayer membrane is a planar model membrane that is formed at an alkanethiol monolayer-coated gold surface by the spontaneous reorganization of phospholipid vesicles. Membrane vesicles from monkey kidney COS-1 cells also reorganize at an alkanethiol/lipid monolayer-coated surface resulting in the formation of a cell membrane hybrid bilayer. Atomic force microscopy and spectroscopic ellipsometry indicate that the cell membrane layer is equivalent to the thickness of one leaflet of the membrane and is continuous over large areas. Cell membrane hybrid bilayers were formed from membrane vesicles from COS-1 cells that were transiently transfected with a synthetic human CCR5 chemokine receptor gene. Preparations that contained "inside out" and "right side out" membrane vesicles were used. Binding of monoclonal antibodies to either the amino- or carboxyl-terminus of CCR5 was observed by surface plasmon resonance and confirmed the presence and the random orientation of these integral membrane receptors. Specific and concentration-dependent binding of the beta-chemokine RANTES to the cell membrane hybrid confirmed that CCR5 retained ligand-binding activity. The ability to form cell membrane hybrid bilayers that contain functional G-protein-coupled or other multispanning receptors without requiring protein isolation, purification, and reconstitution offers a promising method for the rapid screening of potential ligands.     

Crowding-induced membrane remodeling: Interplay of membrane tension,polymer density,architecture

The plasma membrane hosts a wide range of biomolecules, mainly proteins and carbohydrates, that mediate cellular interactions with its environment. The crowding of such biomolecules regulates cellular morphologies and cellular trafficking. Recent discoveries have shown that the structure and density of cell surface polymers and hence the signaling machinery change with the state of the cell, especially in cancer progression. The alterations in membrane-attached glycocalyx and glycosylation of proteins and lipids are common features of cancer cells. The overexpression of glycocalyx polymers, such as mucin and hyaluronan, strongly correlates with cancer metastasis. Here, we present a mesoscale biophysics-based model that accounts for the shape regulation of membranes by crowding of membrane-attached biopolymer-glycocalyx and actin networks. Our computational model is based on the dynamically triangulated Monte Carlo model for membranes and coarse-grained representations of polymer chains. The model allows us to investigate the crowding-induced shape transformations in cell membranes in a tension- and graft polymer density-dependent manner. Our results show that the number of membrane protrusions and their shape depend on membrane tension, with higher membrane tension inducing more tubular protrusions than the vesicular shapes formed at low tension at high surface coverage of polymers. The shape transformations occur above the threshold density predicted by the polymer brush theory, but this threshold also depends on the membrane tension. Increasing the size of the polymer, either by changing the length or by adding side chains, is shown to increase the crowding-induced curvature. The effect of crowding is more prominent for flexible polymers than for semiflexible rigid polymers. We also present an extension of the model that incorporates properties of the actin-like filament networks and demonstrate how tubular structures can be generated by biopolymer crowding on the cytosolic side of cell membranes.     

Degradation of exogenous membrane proteins implanted into the plasma membrane of cultured hepatoma cells

A method for implanting exogenous membrane proteins into recipient hepatoma cells is described. Red cell band 3 and Sendai virus envelope proteins HN and F were extracted from their respective sources and purified by centrifugation to equilibrium through sucrose step gradients in the presence of octyl-beta-D-glucopyranoside. 0.05-0.15 micron vesicles were formed by adding lipid to combined detergent solubilized, isolated membrane proteins and removing detergent by dialysis. The vesicles were hybrid band 3-Sendai envelope vesicles and not a mixture of two distinct vesicle types as judged by (1) the ability of Sendai specific antibody to immunoprecipitate greater than 99% of band 3 from vesicle suspensions and (2) comigration of band 3 and Sendai envelope proteins on isopyknic sucrose density gradients. The hybrid vesicles (virosomes) were not fusogenic but did bind to cultured hepatoma cells in the cold. Subsequent treatment of virosomes absorbed onto cultured cells with polyethylene glycol resulted in a stable association of 2-10% of added band 3 and Sendai envelope proteins with the cells. Efficient transfer of virosome-associated band 3 to the cells was dependent on both lipid and Sendai envelope proteins. Fluid phase marker transfer, immunofluorescence, and protease digestion experiments demonstrate that the majority of the virosomes were implanted into recipient hepatoma membranes and not simply adsorbed onto their surface or immediately endocytosed. The hybrid membrane protein-viral envelope vesicles thus offer an efficient means for insertion of foreign proteins into the membranes of recipient cultured cells.     

开口膜泡形状的研究

本文报道了最近在开口膜泡研究方面的一些理论和实验进展,给出了开口膜泡的形状方程和边界条件及稳定开口膜泡的形状及其相图,并对该领域的研究存在的问题与研究趋势进行了分析.     

Aqueous two-phase polymer partitioning of lipid vesicles of defined size and composition

The kinetics of the partitioning of lipid vesicles containing acidic phospholipids in aqueous two-phase polymer systems are dependent upon the vesicle size; the larger the vesicles, the more readily they absorb to the interfaces between the two polymer phases and hence are cleared from the top phase as phase separation proceeds. The partitioning of neutral lipid vesicles is principally to the bulk interface and is the same in phase systems of both low and high electrostatic potential difference between the two phases (delta psi). The incorporation of negatively charged lipids has two effects upon partition. First, vesicles with negatively charged lipids exhibit increased bottom phase partitioning in phases of low delta psi due to an enhanced wetting of the charged lipids by the lower phase. Second, the presence of a negatively charged group on the vesicle surface results in increased partition to the interface and top phase in phase systems of high delta psi. Differences observed in the partition of vesicles containing various species of negatively charged lipid thus reflect a competition between these two opposing factors.