Xanthine complexes with 3d metal perchlorates

Complexes of xanthine (xnH) with 3d metal perchlorates were prepared by refluxing mixtures of ligand and metal salt in ethyl acetate-triethyl orthoformate. In all cases, partial substitution of anionic xn⁻ for ClO₄⁻ groups occurs, and the solid complexes isolated also contain invariably two neutral xnH ligands per metal ion, viz. Cr(xn)₂(xnH)₂ClO₄, Fe(xn)₂(xnH)₂ClO₄·H₂O, M(xn)(xnH)₂ClO₄·H₂O (M = Fe, Co, Ni) and M(xn)(xnH)₂ClO₄· 2H₂O (M = Mn, Zn). The new complexes are generally hexacoordinated and appear to be linear chainlike polymeric species characterized by a (-Mxn-)_n single-bridged backbone. Four terminal ligands per metal ion, including two xnH groups in all cases, complete its inner coordination sphere; the remaining two terminal ligands differ from complex to complex as follows: M = Cr³⁺ xn⁻, -OClO₃; Fe³⁺ xn⁻, H₂O; Fe²⁺, Co²⁺, Ni²⁺OClO₃, H₂O; Mn²⁺, Zn²⁺ two aqua ligands. Probable binding sites of bidentate bridging xn⁻ and unidentate terminal xnH and xn⁻ are discussed.     

Crystal structure of bifunctional aldos-2-ulose dehydratase/isomerase from Phanerochaete chrysosporium with the reaction intermediate ascopyrone M

The enzyme aldos-2-ulose dehydratase/isomerase (AUDH) participates in carbohydrate secondary metabolism, catalyzing the conversion of glucosone and 1,5-d-anhydrofructose to the secondary metabolites cortalcerone and microthecin, respectively. AUDH is a homo-dimeric enzyme with subunits of 900 amino acids. The subunit consists of a seven-bladed β-propeller domain, two cupin folds and a C-terminal lectin domain. AUDH contains a structural Zn²⁺ and Mg²⁺ located in loop regions and two zinc ions at the bottom of two putative active-site clefts in the propeller and the cupin domain, respectively. Catalysis is dependent on these two zinc ions, as their specific removal led to loss of enzymatic activity. The structure of the Zn²⁺-depleted enzyme is very similar to that of native AUDH, and structural changes upon metal removal as the cause for the catalytic deficiencies can be excluded. The complex with the reaction intermediate ascopyrone M shows binding of this compound at two different sites, with direct coordination to Zn²⁺ in the propeller domain and as second sphere ligand of the metal ion in the cupin domain. These observations suggest that the two reactions of AUDH might be catalyzed in two different active sites, about 60 Å apart. The dehydration reaction most likely follows an elimination mechanism, where Zn²⁺ acts as a Lewis acid polarizing the C2 keto group of 1,5-d-anhydrofructose. Abstraction of the proton at the C3 carbon atom and protonation of the leaving group, the C4 hydroxyl moiety, could potentially be catalyzed by the side chain of the suitably positioned residue His155.     

Effect of metal ions on the activity of the catalytic domain of calcineurin

Calcineurin (CN) is a heterodimer, composed of a catalytic subunit (CNA) and a regulatory subunit (CNB). There are four functional domains present in CNA, which are catalytic domain (CNa), CNB-binding domain (BBH), CaM-binding domain (CBH) and autoinhibitory domain (AI). It has been shown previously that the in vitro activity of calcineurin is relied primarily on the binding of metal ions. Mn2+ and Ni2+ are the most crucial cation-activators for this enzyme. In order to determine which domain(s) in CN is functionally regulated by metal ions, the rat CNA alpha subunit and its catalytic domain (CNa) were cloned and expressed in E. coli. The effects of Mn2+, Ni2+ and Mg2+ on the catalytic activity of these purified proteins were examined. Our results demonstrate that all the metal ions tested in this study activated either CNA or CNa. However, the activation degree of CNa by the metal ions was much higher than that of CNA. In term of different metal ions, the activating extents to CNA and CNa were different. To CNA, the activating order from high to low was Mg2+ > > Ni2+ > Mn2+, but Mn2+ > Ni2+ > > Mg2+ to CNa. No effect of CaM/Ca2+ and CNB/Ca2+ on the activity of CNa was observed in our experiments. Moreover, a weak interaction (or untight coordination binding) between metal ions and the enzyme molecule was also identified. These results suggest that the activation of these enzymes by the exogenous metal ions might be via both regulating fragment of CNA (including BBH, CBH and AI) and catalytic domain (CNa), and mainly via regulating fragment to CNA and mainly via catalytic domain to CNa. The activating extents of metal ions via catalytic domain were higher than that via regulating fragment. The results obtained in this study should be very useful for understanding the molecular mechanism underlying the interaction between calcineurin and metal ions, especially Mn2+, Ni2+ and Mg2+.     

Chelates of tetracycline with first row transition metal perchlorates

2:1 adducts of tetracycline (tc) with 3d metal perchlorates (M = Cr ³⁺, Mn ²⁺, Fe ²+, ^Fe3+, ^Co2+, Ni ²⁺, Cu ²⁺, Zn ²⁺) are synthesized by boiling under reflux mixtures of tc free base and metal salt in ethanol— triethyl orthoformate. Characterization studies suggest that the new complexes are monomeric chelates involving bidentate tetracycline ligands, chelating via the amide group oxygen and the C3O oxygen of the ring A tricarbonylmethane. The complexes also contain unidentate coordinated −OClO ₃ ligands, as weil as ionic ClO ₄^-. The M ³⁺ (Cr, Fe) complexes are hexacoordinated of the [M(tc) ₂(OClO ₃)2 ₃]ClO ₄ type (MO ₆ chromophores), with two bidentate chelating tc and two unidentate perchlorato ligands in the first coordination sphere of the central metal ion. In the M2+ (Mn, Fe, Co, Ni, Cu, Zn) complexes, the inner coordination sphere of the metal ion is occupied by two bidentate chelating tc and only one −OClO ₃ ligand, and the coordination number is five, i.e. [M(tc) ₂OClO ₃]ClO ₄ (MO ₅absorbing species).     

Active‐Site Imprinting: Preparation of Fe–N–C Catalysts from Zinc Ion–Templated Ionothermal Nitrogen‐Doped Carbons

Atomically dispersed Fe–N–C catalysts are considered the most promising precious‐metal‐free alternative to state‐of‐the‐art Pt‐based oxygen reduction electrocatalysts for proton‐exchange membrane fuel cells. The exceptional progress in the field of research in the last ≈30 years is currently limited by the moderate active site density that can be obtained. Behind this stands the dilemma of metastability of the desired FeN₄ sites at the high temperatures that are believed to be a requirement for their formation. It is herein shown that Zn²⁺ ions can be utilized in the novel concept of active‐site imprinting based on a pyrolytic template ion reaction throughout the formation of nitrogen‐doped carbons. As obtained atomically dispersed Zn–N–Cs comprising ZnN₄ sites as well as metal‐free N₄ sites can be utilized for the coordination of Fe²⁺ and Fe³⁺ ions to form atomically dispersed Fe–N–C with Fe loadings as high as 3.12 wt%. The Fe–N–Cs are active electocatalysts for the oxygen reduction reaction in acidic media with an onset potential of E₀ = 0.85 V versus RHE in 0.1 m HClO₄. Identical location atomic resolution transmission electron microscopy imaging, as well as in situ electrochemical flow cell coupled to inductively coupled plasma mass spectrometry measurements, is employed to directly prove the concept of the active‐site imprinting approach.     

The structural basis for specificity in lipoxygenase catalysis

Many intriguing facets of lipoxygenase (LOX) catalysis are open to a detailed structural analysis. Polyunsaturated fatty acids with two to six double bonds are oxygenated precisely on a particular carbon, typically forming a single chiral fatty acid hydroperoxide product. Molecular oxygen is not bound or liganded during catalysis, yet it is directed precisely to one position and one stereo configuration on the reacting fatty acid. The transformations proceed upon exposure of substrate to enzyme in the presence of O₂ (RH + O₂ → ROOH), so it has proved challenging to capture the precise mode of substrate binding in the LOX active site. Beginning with crystal structures with bound inhibitors or surrogate substrates, and most recently arachidonic acid bound under anaerobic conditions, a picture is consolidating of catalysis in a U‐shaped fatty acid binding channel in which individual LOX enzymes use distinct amino acids to control the head‐to‐tail orientation of the fatty acid and register of the selected pentadiene opposite the non‐heme iron, suitably positioned for the initial stereoselective hydrogen abstraction and subsequent reaction with O₂. Drawing on the crystal structures available currently, this review features the roles of the N‐terminal β‐barrel (C2‐like, or PLAT domain) in substrate acquisition and sensitivity to cellular calcium, and the α‐helical catalytic domain in fatty acid binding and reactions with O₂ that produce hydroperoxide products with regio and stereospecificity. LOX structures combine to explain how similar enzymes with conserved catalytic machinery differ in product, but not substrate, specificities.     

Heterometallic complex formation on p-sulfonatothiacalix[4]arene platform resulting in pH- and redox-modification of [Ru(bpy)3] luminescence

The pH-dependent heterometallic complex formation with p-sulfonatothiacalix[4]arene (TCAS) as bridging ligand in aqueous solutions was revealed by the use of spectrophotometry, nuclear magnetic relaxation and fluorimetry methods. The novelty of the structural motif presented is that the appendance of emission metal center ([Ru(bpy)₃]²⁺) is achieved through the cooperative non-covalent interactions with the upper rim of TCAS. The second metal block (Fe(III), Fe(II) and Mn(II)), bound with the lower rim of TCAS in the inner sphere coordination mode is serving as quencher of [Ru(bpy)₃]²⁺ emission. The difference between the complex ability of Fe(III) and Fe(II) ions provides pH conditions for redox-dependent emission of [Ru(bpy)₃]²⁺.     

锰超氧化物歧化酶的催化原理与酶活性调节机制

锰超氧化物歧化酶(MnSOD)催化两分子超氧自由基歧化为分子氧和过氧化氢。超氧自由基被Mn³⁺SOD氧化成分子氧的反应以扩散的方式进行。超氧自由基被Mn²⁺SOD还原为过氧化氢的反应以快循环和慢循环两条途径平行进行。在慢循环途径中,Mn²⁺SOD与超氧自由基形成产物抑制复合物,然后该复合物被质子化而缓慢释放出过氧化氢。在快循环途径中,超氧自由基直接被Mn²⁺SOD转化为产物过氧化氢,快速循环有利于酶的复活与周转。本文提出温度是调节锰超氧化物歧化酶进入慢速或者快速循环催化途径的关键因素。随着在生理温度范围内的温度升高,慢速循环成为整个催化反应的主流,因而生理范围内的温度升高反而抑制该酶的活性。锰超氧化物歧化酶的双相酶促动力学特性可以用该酶保守活性中心的温度依赖性配位模型进行合理化解释。当温度降低时,1个水分子(或者OH^-)接近Mn、甚至与Mn形成配位键,从而干扰超氧自由基与Mn形成配位键而避免形成产物抑制。因此在低温下该酶促反应主要在快循环通路中进行。最后阐述了几种化学修饰模式对...     

Metal dependent hydrolysis of β‐casein by sIgA antibodies from human milk

We present the first evidence that electrophoretically and immunologically homogeneous sIgAs purified from milk of healthy human mothers by chromatography on Protein A‐Sepharose and FPLC gel filtration contain intrinsically bound metal ions (Ca > Mg ≥ Al > Fe ≈ Zn ≥ Ni ≥ Cu ≥ Mn), the removal of which by a dialysis against ethylenediamine tetraacetic acid (EDTA) leads to a significant decrease in the β‐casein‐hydrolyzing activity of these antibodies (Abs). An affinity chromatography of total sIgAs on benzamidine‐Sepharose interacting with canonical serine proteases separates a small metalloprotease sIgA fraction (6.8 ± 2.4%) from the main part of these Abs with a serine protease‐like β‐casein‐hydrolyzing activity. The relative activity of this metalloprotease sIgA fraction containing intrinsically bound metal ions increases ～1.2–1.9‐fold after addition of external metal ions (Mg²⁺ > Fe²⁺ > Cu²⁺ ≥ Ca²⁺ ≥ Mn²⁺) but decreases by 85 ± 7% after the removal of the intrinsically bound metals. The metalloprotease sIgA fraction free of intrinsic metal ions demonstrates a high β‐casein‐hydrolyzing activity in the presence of individual external metal ions (Fe²⁺ > Ca²⁺ > Co²⁺ ≥ Ni²⁺) and especially several combinations of metals: Co²⁺ + Ca²⁺ < Mg²⁺ + Ca²⁺ < Ca²⁺ + Zn²⁺ < Fe²⁺ + Zn²⁺ < Fe²⁺ + Co²⁺ < Fe²⁺ + Ca²⁺. The patterns of hydrolysis of a 22‐mer oligopeptide corresponding to one of sIgA‐dependent specific cleavage sites in β‐casein depend significantly on the metal used. Metal‐dependent sIgAs demonstrate an extreme diversity in their affinity for casein‐Sepharose and chelating Sepharose, and interact with Sepharoses bearing immobilized monoclonal mouse IgGs against λ‐ and κ‐type light chains of human Abs. Possible ways of the production of metalloprotease abzymes (Abz) by human immune system are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Probing the metal ion selectivity in methionine aminopeptidase via changes in the luminescence properties of the enzyme bound europium ion

We report herein, for the first time, that Europium ion (Eu³⁺) binds to the “apo” form of Escherichia coli methionine aminopeptidase (EcMetAP), and such binding results in the activation of the enzyme as well as enhancement in the luminescence intensity of the metal ion. Due to competitive displacement of the enzyme-bound Eu³⁺ by different metal ions, we could determine the binding affinities of both “activating” and “non-activating” metal ions for the enzyme via fluorescence spectroscopy. The experimental data revealed that among all metal ions, Fe²⁺ exhibited the highest binding affinity for the enzyme, supporting the notion that it serves as the physiological metal ion for the enzyme. However, the enzyme-metal binding data did not adhere to the Irving-William series. On accounting for the binding affinity vis a vis the catalytic efficiency of the enzyme for different metal ions, it appears evident that that the “coordination states” and the relative softness” of metal ions are the major determinants in facilitating the EcMetAP catalyzed reaction.     

Stress Distortion Restraint to Boost the Sodium Ion Storage Performance of a Novel Binary Hexacyanoferrate

Mn‐based hexacyanoferrate Na_xMnFe(CN)₆ (NMHFC) has been attracting more attention as a promising cathode material for sodium ion storage owing to its low cost, environmental friendliness, and its high voltage plateau of 3.6 V, which comes from the Mn²⁺/Mn³⁺ redox couple. In particular, the Na‐rich NMHFC (x > 1.40) with trigonal phase is considered an attractive candidate due to its large capacity of ≈130 mAh g^?1, delivering high energy density. Its unstable cycle life, however, is holding back its practical application due to the dissolution of Mn²⁺ and the trigonal‐cubic phase transition during the charge–discharge process. Here, a novel hexacyanoferrate (Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆], NMFHFC‐1) with Na‐rich cubic structure and dual‐metal active redox couples is developed for the first time. Through multiple structural modulation, the stress distortion is minimized by restraining Mn²⁺ dissolution and the trigonal‐cubic phase transition, which are common issues in manganese‐based hexacyanoferrate. Moreover, NMFHFC‐1 simultaneously retains an abundance of Na ions in the framework. As a result, Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆] electrode delivers high energy density (436 Wh kg^?1) and excellent cycle life (80.2% capacity retention over 300 cycles), paving the way for the development of novel commercial cathode materials for sodium ion storage.     

Free metal activity and total metal concentrations as indices of micronutrient availability to barley [Hordeum vulgare (L.) ‘Klages’]

The form in which a micronutrient is found in the rhizosphere affects its availability to plants. We compared the availability to barley of the free hydrated cation form of Fe³⁺, Cu²⁺, Zn²⁺, and Mn²⁺ versus their total metal concentrations (free ion plus complexes) in chelator-buffered solutions. Free metal ion activities were estimated using the chemical equilibrium program GEOCHEM-PC with the corrected database. In experiment 1, barley was grown in nutrient solutions with different Fe³⁺ activities using chelators to control Fe levels. Chlorosis occurred at Fe³⁺ activities of 10^–18 and 10^–19 M for barley grown in HEDTA and EDTA solutions, respectively. In experiment 2, barley was grown in nutrient solutions with the same calculated Fe³⁺ activity and the same chelator, but different total Fe concentrations. Leaf, root and shoot Fe concentrations were higher from CDTA buffered solutions which had the higher total Fe concentration indicating the importance of the total Fe concentration on Fe uptake. Results from treatments using EDTA or HEDTA, with one exception, were similar to the results from the CDTA treatment. This suggests differences in critical Fe³⁺ activities found in experiment 1 were due to differences in the total Fe concentration and not errors in chelate formation constants used to estimate the critical activities. Results for Cu, Zn, and Mn were similar to Fe; despite solutions with equal free Cu²⁺, Zn²⁺ and Mn²⁺ activities, plant concentrations of these metals were generally greater when grown in the solutions with the greater total amount of Cu, Zn, or Mn. When the free Zn²⁺ activity was kept constant while the total amount of Zn was increased from 4.4 to 49 M, leaf Zn concentration increased from 77 to 146 g g^-1. In order to predict metal availability to barley and other species in chelator-buffered nutrient solutions, both free and total metal concentrations in solution must be considered. The critical Fe³⁺ activities required by barley in this study are much higher than those from tomato and soybean, 10^-28 M, which strongly supports the Strategy 2 model of Fe uptake for Poaceae. This is related to the importance of the Fe³⁺ (barley) and the Fe²⁺ (tomato and soybean) ions in Fe uptake. Fe-stressed barley is known to release phytosiderophores which compete for Fe³⁺ in the nutrient solution, while tomato and soybean reduce Fe³⁺ to Fe²⁺ at the epidermal cell membranes to allow uptake of Fe²⁺ from Fe³⁺ chelates in solution.Abbreviations CDTA trans-1,2-diaminocyclohexane-N,N,N,N-tetracetic acid - DTPA diethylenetriaminepentacetic acid - EDTA ethylenediaminetetracetic acid - EDDHA ethylenediamine-di(o-hydroxyphenylacetic acid) - HBED-N,N di(2-hydroxybenzoyl)-ethylenediamine-N,N-diacetic acid - HEDTA-N hydroxyethylenediaminetriacetic acid - MES-2 (N-morpholino)ethanesulfonic acid - NTA nitrilotriacetic acid     

Adenosine adducts with first row transition metal perchlorates

Adducts of adenosine (ado) with 3d metal perchlorates were synthesized by refluxing mixtures of ligand and salt in ethanol-triethyl orthoformate. Metal(III) perchlorates formed adducts involving 2:3 metal to ado molar ratio (MCr, Fe), i.e., M2(ado)₃(ClO₄)₆·4H₂O, whereas 1:1 adducts were produced by metal(II) perchlorates, as follows: M(ado)(ClO₄)₂·2H₂0 (MMn, Co, Ni, Cu); and M(ado)(Cl0₄)₂ (MFe, Zn). All the new complexes seem to be polymeric, involving a linear chainlike backbone with single ado bridges between adjacent metal ions in most cases, i.e., −(-M-ado-)-_n. The coordination sphere of each metal ion is completed by terminal aqua, ado and, with the exception of the Cu²⁺ complex, −OClO₃ ligands, in the case of the hydrated new complexes. Ado would be binding through the N(1) and N(7) ring nitrogens, when functioning as bridging, bidentate. As regards the two water-free M(II) complexes (MFe, Zn), which are apparently distorted tetrahedral, the evidence available is interpreted in terms of the presence of tridentate bridging ado, binding through N(1), N(7) in the same fashion as above, and through one of the ribose hydroxyl oxygens, which form weaker bonds to M²⁺ ions located in a neighboring linear polymeric −(-M-ado-)-n unit; the coordination sphere in these complexes is completed by one −OClO₃ ligand.     

Two Clip Domain Family of Serine Proteases and a Serine Protease Homolog from the Fall Webworm, Hyphantria cunea; cDNA Cloning and Characterization

Two types of serine proteases and a serine protease homologue cDNAs were isolated from Hyphantria cunea larvae induced immune response due to an injection of a microorganism through RT‐PCR and cDNA library screening, and their characteristics were examined. The isolated cDNAs are composed 2.1 kb, 2.2 kb, and 2.5 kb nucleotide each, which encoded 388, 390, 580 amino acid residues, and were designated as HcPE‐1, HcPE‐2 and HcPE‐3, respectively. They were revealed as serine proteases or a serine protease homologue with the clip domain through a database search. The deduced amino acid sequence comparison showed high homology of 72‐78% among them. Six Cys residues of the N‐terminal clip domain forming the disulfide bond, Cys residues of the catalytic domain, and Cys residues forming inter‐bridge between clip domain and catalytic domain were also well preserved. Three amino acid residues, His, Asp, and Ser, within the active site were perfectly conserved in HcPE‐2 and HcPE‐3, however, His was replaced with Gln¹⁷⁸ in HcPE‐1. The Arg residues (HcPE‐1, Arg¹³²; HcPE‐2, Arg¹³⁴; HcPE‐3, Arg³²⁵) known as the activation sites by proteolytic cleavage were preserved well in all three types of protein. In case of HcPE‐3, three continuous clip‐like domains existed in the N terminal. As the result of phylogenetic analysis, three clip domain family of protein from H. cunea make groups with arthropod proclotting enzyme precursor. Northern blot analysis showed all three genes were induced through an injection of Escherichia coli, but expression patterns were varied.     

Probing the role of the divalent metal ion in uteroferrin using metal ion replacement and a comparison to isostructural biomimetics

Purple acid phosphatases (PAPs) are a group of heterovalent binuclear metalloenzymes that catalyze the hydrolysis of phosphomonoesters at acidic to neutral pH. While the metal ions are essential for catalysis, their precise roles are not fully understood. Here, the Fe(III)Ni(II) derivative of pig PAP (uteroferrin) was generated and its properties were compared with those of the native Fe(III)Fe(II) enzyme. The k _cat of the Fe(III)Ni(II) derivative (approximately 60 s⁻¹) is approximately 20% of that of native uteroferrin, and the Ni(II) uptake is considerably faster than the reconstitution of full enzymatic activity, suggesting a slow conformational change is required to attain optimal reactivity. An analysis of the pH dependence of the catalytic properties of Fe(III)Ni(II) uteroferrin indicates that the μ-hydroxide is the likely nucleophile. Thus, the Ni(II) derivative employs a mechanism similar to that proposed for the Ga(III)Zn(II) derivative of uteroferrin, but different from that of the native enzyme, which uses a terminal Fe(III)-bound nucleophile to initiate catalysis. Binuclear Fe(III)Ni(II) biomimetics with coordination environments similar to the coordination environment of uteroferrin were generated to provide both experimental benchmarks (structural and spectroscopic) and further insight into the catalytic mechanism of hydrolysis. The data are consistent with a reaction mechanism employing an Fe(III)-bound terminal hydroxide as a nucleophile, similar to that proposed for native uteroferrin and various related isostructural biomimetics. Thus, only in the uteroferrin-catalyzed reaction are the precise details of the catalytic mechanism sensitive to the metal ion composition, illustrating the significance of the dynamic ligand environment in the protein active site for the optimization of the catalytic efficiency. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Evaluation of substrate promiscuity of an L‐carbamoyl amino acid amidohydrolase from Geobacillus stearothermophilus CECT43

N‐carbamoyl‐amino‐acid amidohydrolase (also known as N‐carbamoylase) is the stereospecific enzyme responsible for the chirality of the D ‐ or L ‐amino acid obtained in the “Hydantoinase Process.” This process is based on the dynamic kinetic resolution of D ,L ‐5‐monosubstituted hydantoins. In this work, we have demonstrated the capability of a recombinant L ‐N‐carbamoylase from the thermophilic bacterium Geobacillus stearothermophilus CECT43 (BsLcar) to hydrolyze N‐acetyl and N‐formyl‐L ‐amino acids as well as the known N‐carbamoyl‐L ‐amino acids, thus proving its substrate promiscuity. BsLcar showed faster hydrolysis for N‐formyl‐L ‐amino acids than for N‐carbamoyl and N‐acetyl‐L ‐derivatives, with a catalytic efficiency (k_cat/K_m) of 8.58 × 10⁵, 1.83 × 10⁴, and 1.78 × 10³ (s^?1 M^?1), respectively, for the three precursors of L ‐methionine. Optimum reaction conditions for BsLcar, using the three N‐substituted‐L ‐methionine substrates, were 65°C and pH 7.5. In all three cases, the metal ions Co²⁺, Mn²⁺, and Ni²⁺ greatly enhanced BsLcar activity, whereas metal‐chelating agents inhibited it, showing that BsLcar is a metalloenzyme. The Co²⁺‐dependent activity profile of the enzyme showed no detectable inhibition at high metal ion concentrations. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Derivatives of the purple phosphatase from red kidney bean: Replacement of zinc with other divalent metal ions

Apoenzyme, containing ⩽0.1 zinc atoms and ⩽0.2 Fe atoms per subunit and with ⩽3% of the phosphatase activity, has been prepared from native red kidney bean purple phosphatase. Treatment of this apoenzyme with Fe³⁺ or Zn²⁺ separately gave very little recovery of activity, whereas treatment with both Fe³⁺ and Zn²⁺ resulted in complete restoration of activity, indicating that both metal ions are essential. ZnFe enzyme with close to one iron and one zinc atom per subunit has been reconstituted by this procedure. Essentially full reactivation was also achieved by addition of Fe³⁺ together with Fe²⁺ or Co²⁺ to the apoenzyme; Fe³⁺ and Cd²⁺ gave 27% restoration of activity, whereas Fe³⁺ with Mn²⁺, Cu²⁺, Ni²⁺ or Hg²⁺ gave little or no increase in activity. Kinetic parameters for the hydrolysis of p-nitrophenyl phosphate and ATP by the FeFe derivative are reported.     

The solution structure of the Mg2+ form of soybean calmodulin isoform 4 reveals unique features of plant calmodulins in resting cells

Soybean calmodulin isoform 4 (sCaM4) is a plant calcium‐binding protein, regulating cellular responses to the second messenger Ca²⁺. We have found that the metal ion free (apo‐) form of sCaM4 possesses a half unfolded structure, with the N‐terminal domain unfolded and the C‐terminal domain folded. This result was unexpected as the apo‐forms of both soybean calmodulin isoform 1 (sCaM1) and mammalian CaM (mCaM) are fully folded. Because of the fact that free Mg²⁺ ions are always present at high concentrations in cells (0.5–2 mM), we suggest that Mg²⁺ should be bound to sCaM4 in nonactivated cells. CD studies revealed that in the presence of Mg²⁺ the initially unfolded N‐terminal domain of sCaM4 folds into an α‐helix‐rich structure, similar to the Ca²⁺ form. We have used the NMR backbone residual dipolar coupling restraints ¹D_NH, ¹D_CαHα, and ¹D_C′Cα to determine the solution structure of the N‐terminal domain of Mg²⁺‐sCaM4 (Mg²⁺‐sCaM4‐NT). Compared with the known structure of Ca²⁺‐sCaM4, the structure of the Mg²⁺‐sCaM4‐NT does not fully open the hydrophobic pocket, which was further confirmed by the use of the fluorescent probe ANS. Tryptophan fluorescence experiments were used to study the interactions between Mg²⁺‐sCaM4 and CaM‐binding peptides derived from smooth muscle myosin light chain kinase and plant glutamate decarboxylase. These results suggest that Mg²⁺‐sCaM4 does not bind to Ca²⁺‐CaM target peptides and therefore is functionally similar to apo‐mCaM. The Mg²⁺‐ and apo‐structures of the sCaM4‐NT provide unique insights into the structure and function of some plant calmodulins in resting cells.     

An aminopeptidase from Agave americana,chemical properties of the enzyme

Agave aminopeptidase, a new enzyme obtained from the plant Agave americana displayed activity towards a variety of substrates. A free alphaamino group on these substrates was essential, but the enzyme did not need any metal ions for optimal activity. Aliphatic, aromatic and basic amino acids situated at the amino terminal end of substrates could be hydrolysed by the enzyme. The enzyme had no endopeptidase or other proteolytic activity. Values of the apparent Michaelis constants for different amino acid substrates, all in the range from 0.1 to 0.6 × 10^?3 M, suggested a relative wide specificity. The pK-values of the two dissociating groups on the enzyme taking part in the catalytic process were pH 6.3 to 6.8 and pH 7.5 to 7.8. These and other studies suggested that histidine plays an active role in the catalytic process. The enzyme was inhibited competitively by free amino acids and this, together with other results, implied a compulsory order of product release.     

The DUF1996 and WSC domain‐containing protein Wsc1I acts as a novel sensor of multiple stress cues in Beauveria bassiana

Wsc1I homologues featuring both an N‐terminal DUF1996 (domain of unknown function 1996) and a C‐terminal WSC (cell wall stress‐responsive component) domain exist in filamentous fungi but have never been functionally characterized. Here, Wsc1I is shown to localize in the vacuoles and cell wall/membrane of the insect mycopathogen Beauveria bassiana and hence linked to cell membrane‐ and vacuole‐related cellular events. In B. bassiana, deletion of Wsc1I resulted in marked increases of hyphal and conidial sensitivities to hyperosmotic agents, oxidants, cell wall perturbing chemicals, and metal cations (Cu²⁺, Zn²⁺, Fe²⁺, and Mg²⁺) despite slight impact on normal growth and conidiation. Conidia produced by the deletion mutant showed not only reduced tolerance to both 45°C heat and UVB irradiation but also attenuated virulence to a susceptible insect through normal cuticle infection or cuticle‐bypassing infection. Importantly, phosphorylation of the mitogen‐activated protein kinase Hog1 was largely attenuated or nearly abolished in the Wsc1I‐free cells triggered with hyperosmotic, oxidative, or cell wall perturbing stress. All changes were well restored by targeted gene complementation. Our findings highlight a novel role of Wsc1I in sensing multiple stress cues upstream of the Hog1 signalling pathway and its pleiotropic effects in B. bassiana.