Solution structure of the RNA binding domain in the human muscleblind‐like protein 2

The muscleblind‐like (MBNL) proteins 1, 2, and 3, which contain four CCCH zinc finger motifs (ZF1–4), are involved in the differentiation of muscle inclusion by controlling the splicing patterns of several pre‐mRNAs. Especially, MBNL1 plays a crucial role in myotonic dystrophy. The CCCH zinc finger is a sequence motif found in many RNA binding proteins and is suggested to play an important role in the recognition of RNA molecules. Here, we solved the solution structures of both tandem zinc finger (TZF) motifs, TZF12 (comprising ZF1 and ZF2) and TZF34 (ZF3 and ZF4), in MBNL2 from Homo sapiens. In TZF12 of MBNL2, ZF1 and ZF2 adopt a similar fold, as reported previously for the CCCH‐type zinc fingers in the TIS11d protein. The linker between ZF1 and ZF2 in MBNL2 forms an antiparallel β‐sheet with the N‐terminal extension of ZF1. Furthermore, ZF1 and ZF2 in MBNL2 interact with each other through hydrophobic interactions. Consequently, TZF12 forms a single, compact global fold, where ZF1 and ZF2 are approximately symmetrical about the C2 axis. The structure of the second tandem zinc finger (TZF34) in MBNL2 is similar to that of TZF12. This novel three‐dimensional structure of the TZF domains in MBNL2 provides a basis for functional studies of the CCCH‐type zinc finger motifs in the MBNL protein family.     

XC1028 from Xanthomonas campestris adopts a PilZ domain‐like structure without a c‐di‐GMP switch

The crystal structure of XC1028 from Xanthomonas campestris has been determined to a resolution of 2.15 Å using the multiple anomalous dispersion approach. It bears significant sequence identity and similarity values of 64.10% and 70.09%, respectively, with PA2960, a protein indispensable for type IV pilus‐mediated twitching motility, after which the PilZ motif was first named. However, both XC1028 and PA2960 lack detectable c‐di‐GMP binding capability. Although XC1028 adopts a structure comprising a five‐stranded β‐barrel core similar to other canonical PilZ domains with robust c‐di‐GMP binding ability, considerable differences are observed in the N‐terminal motif; XC1028 assumes a compact five‐stranded β‐barrel without an extra long N‐terminal motif, whereas other canonical PilZ domains contain a long N‐terminal sequence embedded with an essential “c‐di‐GMP switch” motif. In addition, a β‐strand (β1) in the N‐terminal motif, running in exactly opposite polarity to that of XC1028, is found inserted into the parallel β3/β1′ strands, forming a completely antiparallel β4↓β3↑β1↓β1′↑ sheet in the canonical PilZ domains. Such dramatic structural differences at the N‐terminus may account for the diminished c‐di‐GMP binding capability of XC1028, and suggest that interactions with additional proteins are necessary to bind c‐di‐GMP for type IV fimbriae assembly. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

Centromere localization and function of Mis18 requires Yippee‐like domain‐mediated oligomerization

Mis18 is a key regulator responsible for the centromere localization of the CENP‐A chaperone Scm3 in Schizosaccharomyces pombe and HJURP in humans, which establishes CENP‐A chromatin that defines centromeres. The molecular and structural determinants of Mis18 centromere targeting remain elusive. Here, by combining structural, biochemical, and yeast genetic studies, we show that the oligomerization of S. pombe Mis18, mediated via its conserved N‐terminal Yippee‐like domain, is crucial for its centromere localization and function. The crystal structure of the N‐terminal Yippee‐like domain reveals a fold containing a cradle‐shaped pocket that is implicated in protein/nucleic acid binding, which we show is required for Mis18 function. While the N‐terminal Yippee‐like domain forms a homodimer in vitro and in vivo, full‐length Mis18, including the C‐terminal α‐helical domain, forms a homotetramer in vitro. We also show that the Yippee‐like domains of human Mis18α/Mis18β interact to form a heterodimer, implying a conserved structural theme for Mis18 regulation.     

Novel Functional Features of the LIS-H Domain: Role in Protein Dimerization,Half-Life and Cellular Localization

The presence of a conserved protein motif usually implies common functional features. Here, we focused on the LisH (LIS1 homology) domain, which is found in multiple proteins, and have focused on three involved in human genetic diseases; LIS1, Transducin beta-like 1X (TBL1) and Oral-facial-digital type 1 (OFD1). The recently solved structure of the LisH domain in the N-terminal region of LIS1 depicted it as a novel dimerization motif. Our findings indicated that the LisH domain of both LIS1 and TBL1 is essential for in vitro oligomerization. Furthermore, our study disclosed novel in vivo features of the LisH motif. Mutationsin conserved LisH amino acids significantly reduced both the protein half-life of LIS1, TBL1, and OFD1, and dramatically affected specific intracellular localizations of these proteins. LIS1 mutated in the LisH domain induced its localization to the actin filaments. TBL1 mutated in the LisH domain was not imported into the nucleus. Mutations in OFD1 modified its localization to the Golgi apparatus and in some cases also to the nucleus. In summary, the LisH domain may participate in protein dimerization, affect protein half-life, and may influence specific cellular localizations. Our results allow the prediction that mutations withinthe LisH motif are likely to result in pathogenic consequences in genes associated with genetic diseases.     

Identification,structural, and biochemical characterization of a group of large Csn2 proteins involved in CRISPR‐mediated bacterial immunity

Many prokaryotic organisms acquire immunity against foreign genetic material by incorporating a short segment of foreign DNA called spacer into chromosomal loci, termed clustered regularly interspaced short palindromic repeats (CRISPRs). The encoded RNAs are processed into small fragments that guide the silencing of the invading genetic elements. The CRISPR‐associated (Cas) proteins are the main executioners of these processes. Herein, we report the crystal structure of Stu0660 of Streptococcus thermophilus, a Cas protein involved in the acquisition of new spacers. By homotetramerization, Stu0660 forms a central channel which is decorated with basic amino acids and binds linear double‐stranded DNA (dsDNA), but not circular dsDNA. Despite undetectably low sequence similarity, two N‐terminal domains of Stu0660 are similar to the entire structure of an Enterococcus faecalis Csn2 protein, which also forms a homotetramer and binds dsDNA. Thus, this work identifies a previously unknown group of Stu0660‐like Csn2 proteins (～350 residues), which are larger than the known canonical Csn2 proteins (～220 residues) by containing an extra C‐terminal domain. The commonly present central channel in the two subgroups appears as a design to selectively interact with linear dsDNA. Proteins 2012. © 2012 Wiley Periodicals, Inc.     

X‐ray crystal structure of the N‐terminal region of Moloney murine leukemia virus integrase and its implications for viral DNA recognition

The retroviral integrase (IN) carries out the integration of a dsDNA copy of the viral genome into the host DNA, an essential step for viral replication. All IN proteins have three general domains, the N‐terminal domain (NTD), the catalytic core domain, and the C‐terminal domain. The NTD includes an HHCC zinc finger‐like motif, which is conserved in all retroviral IN proteins. Two crystal structures of Moloney murine leukemia virus (M‐MuLV) IN N‐terminal region (NTR) constructs that both include an N‐terminal extension domain (NED, residues 1–44) and an HHCC zinc‐finger NTD (residues 45–105), in two crystal forms are reported. The structures of IN NTR constructs encoding residues 1–105 (NTR_1–105) and 8–105 (NTR_8–105) were determined at 2.7 and 2.15 Å resolution, respectively and belong to different space groups. While both crystal forms have similar protomer structures, NTR_1–105 packs as a dimer and NTR_8–105 packs as a tetramer in the asymmetric unit. The structure of the NED consists of three anti‐parallel β‐strands and an α‐helix, similar to the NED of prototype foamy virus (PFV) IN. These three β‐strands form an extended β‐sheet with another β‐strand in the HHCC Zn²⁺ binding domain, which is a unique structural feature for the M‐MuLV IN. The HHCC Zn²⁺ binding domain structure is similar to that in HIV and PFV INs, with variations within the loop regions. Differences between the PFV and MLV IN NEDs localize at regions identified to interact with the PFV LTR and are compared with established biochemical and virological data for M‐MuLV. Proteins 2017; 85:647–656. © 2016 Wiley Periodicals, Inc.     

Structural and functional features of the NAD(P) dependent Gfo/Idh/MocA protein family oxidoreductases

The Gfo/Idh/MocA protein family contains a number of different proteins, which almost exclusively consist of NAD(P)‐dependent oxidoreductases that have a diverse set of substrates, typically pyranoses. In this study, to clarify common structural features that would contribute to their function, the available crystal structures of the members of this family have been analyzed. Despite a very low sequence identity, the central features of the three‐dimensional structures of the proteins are surprisingly similar. The members of the protein family have a two‐domain structure consisting of a N‐terminal nucleotide‐binding domain and a C‐terminal α/β‐domain. The C‐terminal domain contributes to the substrate binding and catalysis, and contains a βα‐motif with a central α‐helix carrying common essential amino acid residues. The β‐sheet of the α/β‐domain contributes to the oligomerization in most of the proteins in the family.     

Structure and interactions of the C‐terminal metal binding domain of Archaeoglobus fulgidus CopA

The Cu⁺‐ATPase CopA from Archaeoglobus fulgidus belongs to the P_1B family of the P‐type ATPases. These integral membrane proteins couple the energy of ATP hydrolysis to heavy metal ion translocation across membranes. A defining feature of P_1B‐1‐type ATPases is the presence of soluble metal binding domains at the N‐terminus (N‐MBDs). The N‐MBDs exhibit a conserved ferredoxin‐like fold, similar to that of soluble copper chaperones, and bind metal ions via a conserved CXXC motif. The N‐MBDs enable Cu⁺ regulation of turnover rates apparently through Cu‐sensitive interactions with catalytic domains. A. fulgidus CopA is unusual in that it contains both an N‐terminal MBD and a C‐terminal MBD (C‐MBD). The functional role of the unique C‐MBD has not been established. Here, we report the crystal structure of the apo, oxidized C‐MBD to 2.0 Å resolution. In the structure, two C‐MBD monomers form a domain‐swapped dimer, which has not been observed previously for similar domains. In addition, the interaction of the C‐MBD with the other cytoplasmic domains of CopA, the ATP binding domain (ATPBD) and actuator domain (A‐domain), has been investigated. Interestingly, the C‐MBD interacts specifically with both of these domains, independent of the presence of Cu⁺ or nucleotides. These data reinforce the uniqueness of the C‐MBD and suggest a distinct structural role for the C‐MBD in CopA transport. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

The dense‐core vesicle maturation protein CCCP‐1 binds RAB‐2 and membranes through its C‐terminal domain

Dense‐core vesicles (DCVs) are secretory organelles that store and release modulatory neurotransmitters from neurons and endocrine cells. Recently, the conserved coiled‐coil protein CCCP‐1 was identified as a component of the DCV biogenesis pathway in the nematode Caenorhabditis elegans. CCCP‐1 binds the small GTPase RAB‐2 and colocalizes with it at the trans‐Golgi. Here, we report a structure‐function analysis of CCCP‐1 to identify domains of the protein important for its localization, binding to RAB‐2, and function in DCV biogenesis. We find that the CCCP‐1 C‐terminal domain (CC3) has multiple activities. CC3 is necessary and sufficient for CCCP‐1 localization and for binding to RAB‐2, and is required for the function of CCCP‐1 in DCV biogenesis. In addition, CCCP‐1 binds membranes directly through its CC3 domain, indicating that CC3 may comprise a previously uncharacterized lipid‐binding motif. We conclude that CCCP‐1 is a coiled‐coil protein that binds an activated Rab and localizes to the Golgi via its C‐terminus, properties similar to members of the golgin family of proteins. CCCP‐1 also shares biophysical features with golgins; it has an elongated shape and forms oligomers.      

Structure of the F‐spondin domain of mindin,an integrin ligand and pattern recognition molecule

Mindin (spondin‐2) is an extracellular matrix protein of unknown structure that is required for efficient T‐cell priming by dendritic cells. Additionally, mindin functions as a pattern recognition molecule for initiating innate immune responses. These dual functions are mediated by interactions with integrins and microbial pathogens, respectively. Mindin comprises an N‐terminal F‐spondin (FS) domain and C‐terminal thrombospondin type 1 repeat (TSR). We determined the structure of the FS domain at 1.8‐Å resolution. The structure revealed an eight‐stranded antiparallel β‐sandwich motif resembling that of membrane‐targeting C2 domains, including a bound calcium ion. We demonstrated that the FS domain mediates integrin binding and identified the binding site by mutagenesis. The mindin FS domain therefore represents a new integrin ligand. We further showed that mindin recognizes lipopolysaccharide (LPS) through its TSR domain, and obtained evidence that C‐mannosylation of the TSR influences LPS binding. Through these dual interactions, the FS and TSR domains of mindin promote activation of both adaptive and innate immune responses.     

Sde2 is an intron‐specific pre‐mRNA splicing regulator activated by ubiquitin‐like processing

The expression of intron‐containing genes in eukaryotes requires generation of protein‐coding messenger RNAs (mRNAs) via RNA splicing, whereby the spliceosome removes non‐coding introns from pre‐mRNAs and joins exons. Spliceosomes must ensure accurate removal of highly diverse introns. We show that Sde2 is a ubiquitin‐fold‐containing splicing regulator that supports splicing of selected pre‐mRNAs in an intron‐specific manner in Schizosaccharomyces pombe. Both fission yeast and human Sde2 are translated as inactive precursor proteins harbouring the ubiquitin‐fold domain linked through an invariant GGKGG motif to a C‐terminal domain (referred to as Sde2‐C). Precursor processing after the first di‐glycine motif by the ubiquitin‐specific proteases Ubp5 and Ubp15 generates a short‐lived activated Sde2‐C fragment with an N‐terminal lysine residue, which subsequently gets incorporated into spliceosomes. Absence of Sde2 or defects in Sde2 activation both result in inefficient excision of selected introns from a subset of pre‐mRNAs. Sde2 facilitates spliceosomal association of Cactin/Cay1, with a functional link between Sde2 and Cactin further supported by genetic interactions and pre‐mRNA splicing assays. These findings suggest that ubiquitin‐like processing of Sde2 into a short‐lived activated form may function as a checkpoint to ensure proper splicing of certain pre‐mRNAs in fission yeast.     

Crystal structure of the ubiquitin‐like small archaeal modifier protein 2 from Haloferax volcanii

The discovery of ubiquitin‐like small archaeal modifier protein 2 (SAMP2) that forms covalent polymeric chains in Haloferax volcanii has generated tremendous interest in the function and regulation of this protein. At present, it remains unclear whether the Hfx. volcanii modifier protein SAMP1 has such polyubiquitinating‐like activity. Although SAMP1 and SAMP2 use the same conjugation machinery to modify their target proteins, each can impart distinct functional consequences. To better understand the mechanism of SAMP2 conjugation, we have sought to characterize the biophysical and structural properties of the protein from Hfx. volcanii. SAMP2 is only partially structured under mesohalic solution conditions and adopts a well‐folded compact conformation in the presence of 2.5M of NaCl. Its 2.3‐Å‐resolution crystal structure reveals a characteristic α/β central core domain and a unique β‐hinge motif. This motif anchors an unusual C‐terminal extension comprising the diglycine tail as well as two lysine residues that can potentially serve to interlink SAMP2 moieties. Mutational alternation of the structural malleability of this β‐hinge motif essentially abolishes the conjugation activity of SAMP2 in vivo. In addition, NMR structural studies of the putative ubiquitin‐like protein HVO_2177 from Hfx. volcanii show that like SAMP1, HVO_2177 forms a classic β‐grasp fold in a salt‐independent manner. These results provide insights into the structure–function relationship of sampylating proteins of fundamental importance in post‐translational protein modification and environmental cues in Archaea.     

Idiosyncrasy and identity in the prokaryotic Phe-system: crystal structure of E. coli phenylalanyl-tRNA synthetase complexed with phenylalanine and AMP

The crystal structure of Phenylalanyl‐tRNA synthetase from E. coli (EcPheRS), a class II aminoacyl‐tRNA synthetase, complexed with phenylalanine and AMP was determined at 3.05 Å resolution. EcPheRS is a (αβ)₂ heterotetramer: the αβ heterodimer of EcPheRS consists of 11 structural domains. Three of them: the N‐terminus, A1 and A2 belong to the α‐subunit and B1‐B8 domains to the β subunit. The structure of EcPheRS revealed that architecture of four helix‐bundle interface, characteristic of class IIc heterotetrameric aaRSs, is changed: each of the two long helices belonging to CLM transformed into the coil‐short helix structural fragments. The N‐terminal domain of the α‐subunit in EcPheRS forms compact triple helix domain. This observation is contradictory to the structure of the apo form of TtPheRS, where N‐terminal domain was not detected in the electron density map. Comparison of EcPheRS structure with TtPheRS has uncovered significant rearrangements of the structural domains involved in tRNA^Phe binding/translocation. As it follows from modeling experiments, to achieve a tighter fit with anticodon loop of tRNA, a shift of ～5 Å is required for C‐terminal domain B8, and of ～6 to 7 Å for the whole N terminus. EcPheRSs have emerged as an important target for the incorporation of novel amino acids into genetic code. Further progress in design of novel compounds is anticipated based on the structural data of EcPheRS.     

Structural mapping of the coiled‐coil domain of a bacterial condensin and comparative analyses across all domains of life suggest conserved features of SMC proteins

The structural maintenance of chromosomes (SMC) proteins form the cores of multisubunit complexes that are required for the segregation and global organization of chromosomes in all domains of life. These proteins share a common domain structure in which N‐ and C‐ terminal regions pack against one another to form a globular ATPase domain. This “head” domain is connected to a central, globular, “hinge” or dimerization domain by a long, antiparallel coiled coil. To date, most efforts for structural characterization of SMC proteins have focused on the globular domains. Recently, however, we developed a method to map interstrand interactions in the 50‐nm coiled‐coil domain of MukB, the divergent SMC protein found in γ‐proteobacteria. Here, we apply that technique to map the structure of the Bacillus subtilis SMC (BsSMC) coiled‐coil domain. We find that, in contrast to the relatively complicated coiled‐coil domain of MukB, the BsSMC domain is nearly continuous, with only two detectable coiled‐coil interruptions. Near the middle of the domain is a break in coiled‐coil structure in which there are three more residues on the C‐terminal strand than on the N‐terminal strand. Close to the head domain, there is a second break with a significantly longer insertion on the same strand. These results provide an experience base that allows an informed interpretation of the output of coiled‐coil prediction algorithms for this family of proteins. A comparison of such predictions suggests that these coiled‐coil deviations are highly conserved across SMC types in a wide variety of organisms, including humans. Proteins 2015; 83:1027–1045. © 2015 Wiley Periodicals, Inc.     

Modular toxin from the lynx spider Oxyopes takobius: Structure of spiderine domains in solution and membrane‐mimicking environment

We have recently demonstrated that a common phenomenon in evolution of spider venom composition is the emergence of so‐called modular toxins consisting of two domains, each corresponding to a “usual” single‐domain toxin. In this article, we describe the structure of two domains that build up a modular toxin named spiderine or OtTx1a from the venom of Oxyopes takobius. Both domains were investigated by solution NMR in water and detergent micelles used to mimic membrane environment. The N‐terminal spiderine domain OtTx1a‐AMP (41 amino acid residues) contains no cysteines. It is disordered in aqueous solution but in micelles, it assumes a stable amphiphilic structure consisting of two α‐helices separated by a flexible linker. On the contrary, the C‐terminal domain OtTx1a‐ICK (59 residues) is a disulfide‐rich polypeptide reticulated by five S–S bridges. It presents a stable structure in water and its core is the inhibitor cystine knot (ICK) or knottin motif that is common among single‐domain neurotoxins. OtTx1a‐ICK structure is the first knottin with five disulfide bridges and it represents a good reference for the whole oxytoxin family. The affinity of both domains to membranes was measured with NMR using titration by liposome suspensions. In agreement with biological tests, OtTx1a‐AMP was found to show high membrane affinity explaining its potent antimicrobial properties.