A High‐Energy‐Density Multiple Redox Semi‐Solid‐Liquid Flow Battery

A new concept of multiple redox semi‐solid‐liquid (MRSSL) flow battery that takes advantage of active materials in both liquid and solid phases, is proposed and demonstrated. Liquid lithium iodide (LiI) electrolyte and solid sulfur/carbon (S/C) composite, forming LiI‐S/C MRSSL catholyte, are employed to demonstrate this concept. Record volumetric capacity (550 Ah L^?1_catholyte) is achieved using highly concentrated and synergistic multiple redox reactions of LiI and sulfur. The liquid LiI electrolyte is found to increase the reversible volumetric capacity of the catholyte, improve the electrochemical utilization of the S/C composite, and reduce the viscosity of catholyte. A continuous flow test is demonstrated and the influence of the flow rate on the flow battery performance is discussed. The MRSSL flow battery concept transforms inactive component into bi‐functional active species and creates synergistic interactions between multiple redox couples, offering a new direction and wide‐open opportunities to develop high‐energy‐density flow batteries.     

A year‐long plant‐pollinator network

Abstract In this work we analyse the pollination community in a South American forest known as ‘talar’. This is a vegetal woody community that inhabits fossil coastal banks characterized by seasonal temperate weather and calcareous soil, at the coast of the Río de la Plata, in the province of Buenos Aires, Argentina. We obtained data of the interactions between anthophylous insects and entomophylous flowering plants over an extensive period of time. We showed that pollination system parameters, such as partners’ identity, system size, and connectance, fluctuated among months, when sampled year‐long. Maximal network size occurred in early spring and early autumn, when both the number of mutualistic species and the number of interactions peaked, and this was also when network asymmetry was higher than average. Monthly connectance of the plant‐flower visitor matrix decreased to its lowest values at these peaks. Available data suggest that cumulative traditional connectance (i.e. the connectance calculated as the whole number of interactions registered in the community divided by the full size system) underestimates actual connectance values by a factor of c. 3 ×. Monthly values of connectance decreased exponentially as system size increased, and the distribution of interactions per species followed power‐law regimes for animals, and truncated power‐law regimes for plants, in accordance with patterns previously deduced from among‐network cumulative communities studies. We think that either within or and among pollination networks, systems that are organized as power‐law regimes may be a basic property of these webs, and provide examples of the fact. Both seasonal changes and interactions between mutualists like competition, and some degree of facilitation, may be very important to understand the performance of the system as a whole, and the role and importance of different species in the community. We suggest that communities of plant – pollinators that exhibit extended activity, such as temperate or tropical seasonal ones, should be studied through consecutive plant‐pollinator webs rather than cumulative ones. The partition of the system into smaller serial parts allows us to obtain outstanding information of every short period. This information is flattened by the average effect when we considered the combined analysis of the whole data.     

All‐Solid‐State Lithium‐Ion Microbatteries: A Review of Various Three‐Dimensional Concepts

With the increasing importance of wireless microelectronic devices the need for on‐board power supplies is evidently also increasing. Possible candidates for microenergy storage devices are planar all‐solid‐state Li‐ion microbatteries, which are currently under development by several start‐up companies. However, to increase the energy density of these microbatteries further and to ensure a high power delivery, three‐dimensional (3D) designs are essential. Therefore, several concepts have been proposed for the design of 3D microbatteries and these are reviewed. In addition, an overview is given of the various electrode and electrolyte materials that are suitable for 3D all‐solid‐state microbatteries. Furthermore, methods are presented to produce films of these materials on a nano‐ and microscale.     

WNT‐3A and WNT‐5A counteract lipopolysaccharide‐induced pro‐inflammatory changes in mouse primary microglia

Surveying microglia, the resident macrophage‐like cells in the central nervous system, continuously screen their surroundings to sense imbalance in tissue homeostasis. Their activity is tightly regulated in both a pro‐ and anti‐inflammatory manner. We have previously shown that the lipoglycoproteins WNT‐3A and WNT‐5A drive pro‐inflammatory transformation in primary mouse microglia cells, arguing that WNTs have a role in the modulation of the central nervous system immune response. In this study, we address the effects of recombinant WNT‐3A and WNT‐5A on lipopolysaccharide (LPS)‐activated mouse primary microglia to investigate the putative anti‐inflammatory modulation of microglia by WNTs. While both WNT‐3A and WNT‐5A alone induce an up‐regulation of cyclooxygenase 2 (COX2), a generic pro‐inflammatory microglia marker, LPS exceeds these effects dramatically. However, combination of LPS and WNTs results in a dose‐dependent decrease in LPS‐induced cyclooxygenase 2 protein and mRNA expression. In conclusion, our data suggest that WNTs have a dual and context‐dependent effect on microglia acting in a homeostatic pro‐ and anti‐inflammatory manner.     

A convenient microwave‐enhanced solid‐phase synthesis of short chain N‐methyl‐rich peptides

Structural modification of the peptide backbone via N‐methylation is a powerful tool to modulate the pharmacokinetic profile and biological activity of peptides. Here we describe a rapid and highly efficient microwave(MW)‐assisted Fmoc/tBu solid‐phase method to prepare short chain N‐methyl‐rich peptides, using Rink amide p‐methylbenzhydrylamine (MBHA) resin as solid‐phase support. This method produces peptides in high yield and purity, and reduces the time required for Fmoc‐N‐methyl amino acid coupling. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

A post‐translational,c‐di‐GMP‐dependent mechanism regulating flagellar motility

Elevated levels of the second messenger cyclic dimeric GMP, c‐di‐GMP, promote transition of bacteria from single motile cells to surface‐attached multicellular communities. Here we describe a post‐translational mechanism by which c‐di‐GMP initiates this transition in enteric bacteria. High levels of c‐di‐GMP induce the counterclockwise bias in Escherichia coli flagellar rotation, which results in smooth swimming. Based on co‐immunoprecipitation, two‐hybrid and mutational analyses, the E. coli c‐di‐GMP receptor YcgR binds to the FliG subunit of the flagellum switch complex, and the YcgR–FliG interaction is strengthened by c‐di‐GMP. The central fragment of FliG binds to YcgR as well as to FliM, suggesting that YcgR–c‐di‐GMP biases flagellum rotation by altering FliG‐FliM interactions. The c‐di‐GMP‐induced smooth swimming promotes trapping of motile bacteria in semi‐solid media and attachment of liquid‐grown bacteria to solid surfaces, whereas c‐di‐GMP‐dependent mechanisms not involving YcgR further facilitate surface attachment. The YcgR–FliG interaction is conserved in the enteric bacteria, and the N‐terminal YcgR/PilZN domain of YcgR is required for this interaction. YcgR joins a growing list of proteins that regulate motility via the FliG subunit of the flagellum switch complex, which suggests that FliG is a common regulatory entryway that operates in parallel with the chemotaxis that utilizes the FliM‐entryway.     

Slow‐growth high‐mortality: A meta‐analysis for insects

The slow growth‐high mortality hypothesis (SG‐HG) predicts that slower growing herbivores suffer greater mortality due to a prolonged window of vulnerability. Given diverse plant–herbivore–natural enemy systems resulting from different feeding ecologies of herbivores and natural enemies, this hypothesis might not always be applicable to all systems. This is evidenced by mixed support from empirical data. In this study, a meta‐analysis of the SG‐HM hypothesis for insects was conducted, aiming to find conditions that favor or reject SG‐HM. The analysis revealed significant within‐ and between‐group heterogeneity for almost all explanatory variables and overall did not support SG‐HM. In this analysis, SG‐HM was supported when any of the following 5 conditions was met: (1) host food consisted of artificial diet; (2) herbivore growth was measured as larval mass; (3) herbivores were generalists; (4) no or multiple species of natural enemies were involved in the study; and (5) parasitoids (i.e., parasitic insects) involved in the study were gregarious. SG‐HM was rejected when any of the following 5 conditions was met: (1) herbivores were from the order Hymentoptera; (2) parasitoids from more than 1 order caused herbivore mortality; (2) parasitoids were specialists; (3) parasitoids were solitary; (4) parasitoids were idiobionts or koinobionts; and (5) single species of natural enemy caused mortality of specialist herbivores. All known studies investigated herbivore mortality for a short period of their life cycle. Researchers are encouraged to monitor herbivore mortality during the entire window of susceptibility or life cycle using life tables. Studies involving multiple mortality factors (i.e., both biotic and abiotic) or multiple natural enemy species are also encouraged since herbivores in nature face a multitude of risks during the entire life cycle. More comprehensive studies may increase our understanding of factors influencing the relationships between herbivore growth and mortality.     

A Simple Method for Resolution of Endo‐/Exo‐Monoesters of Trans‐Norborn‐5‐Ene‐2,3‐Dicarboxylic Acids Into Their Enantiomers

Separation of optical isomers obtainable from trans‐norborn‐5‐ene‐2,3‐dicarboxylic acid methyl and tert‐butyl monoesters was performed by crystallization of the respective salts prepared with (R)‐ and (S)‐1‐phenylethylamine. Starting from racemic endo‐monomethyl ester of trans‐norborn‐5‐ene‐2,3‐dicarboxylic acid, prepared by partial hydrolysis of the cyclopentadiene‐dimethyl fumarate adduct, the corresponding (2R,3R)‐endo‐monoester was isolated in 97% enantiomeric excess (ee) yield after seven repeated crystallizations from tetrachloromethane. Starting from exo‐mono‐tert‐butyl ester of the same acid, prepared by alcoholysis of the cyclopentadiene‐maleic anhydride adduct followed by isomerization, (2R,3R)‐exo‐monoester was isolated in >98% ee yield after four repeated crystallizations from ethanol. Crystallization of the acids from the mother liquor containing (S)‐1‐phenylethylamine yielded products with inverse stereochemical configuration. Chirality 27:151–155, 2015. © 2014 Wiley Periodicals, Inc.     

In vitro effects of 2‐methoxyestradiol‐bis‐sulphamate on the non‐tumorigenic MCF‐12A cell line

A priority in recent anti‐cancer drug development has been attaining better side‐effect profiles for potential compounds. To produce highly specific cancer therapies it is necessary to understand both the effects of the proposed compound on cancer and on normal cells comprising the rest of the human body. Thus in vitro evaluation of these compounds against non‐carcinogenic cell lines is of critical importance. One of the most recent developments in experimental anti‐cancer agents is 2‐methoxyestradiol‐bis‐sulphamate (2ME‐BM), a sulphamoylated derivative of 2‐methoxyestradiol. The aim of this study was to evaluate the in vitro effects of 2ME‐BM on cell proliferation, morphology and mechanisms of cell death in the non‐carcinogenic MCF‐12A breast epithelial cell line. The study revealed changes in proliferative capacity, morphology and cell death induction in response to 2ME‐BM exposure (24 h at 0.4 µM). Microscopy showed decreased cell density and cell death‐associated morphology (increased apoptotic characteristics), a slight increase in acidic intracellular vesicles and insignificant ultra‐structural aberrations. Mitotic indices revealed a G₂M‐phase cell cycle block. This was confirmed by flow cytometry, where an increased fraction of abnormal cells and a decrease in cyclin B1 levels were observed. These results evidently demonstrate that the non‐carcinogenic MCF‐12A cell line is less susceptible when compared to 2ME‐BM‐exposed cancer cell lines previously tested. Further in vitro research into the mechanism of this potentially useful compound is warranted. Copyright © 2010 John Wiley & Sons, Ltd.     

A Sodium‐Ion Battery with a Low‐Cost Cross‐Linked Gel‐Polymer Electrolyte

The design of a sodium‐ion rechargeable battery with an antimony anode, a Na₃V₂(PO₄)₃ cathode, and a low‐cost composite gel‐polymer electrolyte based on cross‐linked poly(methyl methacrylate) is reported. The application of an antimony anode, on replacement of the sodium metal that is commonly used in sodium‐ion half‐cells, reduces significantly the interfacial resistance and charge transfer resistance of a sodium‐ion battery, which enables a smaller polarization for a sodium‐ion full‐cell Sb/Na₃V₂(PO₄)₃ running at relatively high charge and discharge rates. The incorporation of the gel‐polymer electrolyte is beneficial to maintain stable interfaces between the electrolyte and the electrodes of the sodium‐ion battery at elevated temperature. When running at 60 °C, the sodium‐ion full‐cell Sb/Na₃V₂(PO₄)₃ with the gel‐polymer electrolyte exhibits superior cycling stability compared to a battery with the conventional liquid electrolyte.     

Amorphous Tin‐Based Composite Oxide: A High‐Rate and Ultralong‐Life Sodium‐Ion‐Storage Material

Energy‐storage technology is moving beyond lithium batteries to sodium as a result of its high abundance and low cost. However, this sensible transition requires the discovery of high‐rate and long‐lifespan anode materials, which remains a significant challenge. Here, the facile synthesis of an amorphous Sn₂P₂O₇/reduced graphene oxide nanocomposite and its sodium storage performance between 0.01 and 3.0 V are reported for the first time. This hybrid electrode delivers a high specific capacity of 480 mA h g^?1 at a current density of 50 mA g^?1 and superior rate performance of 250 and 165 mA h g^?1 at 2 and 10 A g^?1, respectively. Strikingly, this anode can sustain 15 000 cycles while retaining over 70% of the initial capacity. Quantitative kinetic analysis reveals that the sodium storage is governed by pseudocapacitance, particularly at high current rates. A full cell with sodium super ionic conductor (NASICON)‐structured Na₃V₂(PO₄)₂F₃ and Na₃V₂(PO₄)₃ as cathodes exhibits a high energy density of over 140 W h kg^?1 and a power density of nearly 9000 W kg^?1 as well as stability over 1000 cycles. This exceptional performance suggests that the present system is a promising power source for promoting the substantial use of low‐cost energy storage systems.     

Irreversible thermoinactivation of ribonuclease‐A by soft‐hydrothermal processing

Ribonuclease (RNase), which often represents molecular biological contamination, is a thermostable enzyme. When RNase is heated at 121°C by autoclave sterilization for 20 min, it does not lose its activity. However, the nature of the molecular events by which the irreversible denaturation occurs remains unknown. The purpose of this study was to elucidate the molecular mechanisms of irreversible thermal denaturation of RNase A and to develop an advanced sterilization method using soft‐hydrothermal processing, which has the advantages of improved safety and cost‐efficiency. The enzymatic activity of RNase was measured using polyacrylamide gel electrophoresis with torula yeast RNA. We evaluated the temperature and time course of irreversible thermoinactivation of RNase by normal autoclaving, hot‐air sterilization, and soft‐hydrothermal processing that had been controlled to the desired steam saturation ratio. The results indicated that RNase A was deactivated by autoclave sterilization (121°C, 20 min) immediately after treatment, but was reactivated over time. Hot‐air sterilization (180°C, atmospheric pressure, 60 min) produced results similar to that of autoclave sterilization. In contrast, RNase A was irreversibly thermoinactivated by soft‐hydrothermal processing (110°C, 20 min) at 100% steam saturation ratio. We also determined that the mechanism of irreversible thermoinactivation of RNase A involved hydrolysis and deamidation under this condition at a steam saturation ratio of more than 100%. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009