Design of inhibitors for human tissue kallikrein using non-natural aromatic and basic amino acids

We explored the unique substrate specificity of the primary S, subsite of human urinary kallikrein (hK1), which accepts both Phe or Arg synthesizing and assaying peptides derived from Phenylacetyl-Phe-Ser-Arg-EDDnp, a previously described inhibitor with analgesic and anti-inflammatory activities [Emim et al., Br. J. Pharmacol. 130 (2000), 1099-1107]. Phe was substituted by amino acids containing larger aliphatic or aromatic side chains as well as by non-natural basic amino acids, which were designed to combine a large hydrophobic and/or aromatic group with a positively-charged group at their side chains. In general, all peptides with basic amino acids represented better inhibitors than those with hydrophobic amino acids. Furthermore, the S1 subsite specificity proved to be much more selective than the mere distinction between Phe and Arg, for minor differences in the side chains of the non-natural amino acids resulted in major differences in the Ki values. Finally, we present a series of peptides that were assayed as competitive inhibitors for human tissue kallikrein that may lead to the development of novel peptides, which are both more potent and selective.     

Topography of the prostaglandin endoperoxide H2 synthase-2 in membranes

The topology of association of the monotopic protein cyclooxygenase-2 (COX-2) with membranes has been examined using EPR spectroscopy of spin-labeled recombinant human COX-2. Twenty-four mutants, each containing a single free cysteine substituted for an amino acid in the COX-2 membrane binding domain were expressed using the baculovirus system and purified, then conjugated with a nitroxide spin label and reconstituted into liposomes. Determining the relative accessibility of the nitroxide-tagged amino acid side chains for the solubilized COX-2 mutants, or COX-2 reconstituted into liposomes to nonpolar (oxygen) and polar (NiEDDA or CrOx) paramagnetic reagents allowed us to map the topology of COX-2 interaction with the lipid bilayer. When spin-labeled COX-2 was reconstituted into liposomes, EPR power saturation curves showed that side chains for all but two of the 24 mutants tested had limited accessibility to both polar and nonpolar paramagnetic relaxation agents, indicating that COX-2 associates primarily with the interfacial membrane region near the glycerol backbone and phospholipid head groups. Two amino acids, Phe(66) and Leu(67), were readily accessible to the non-polar relaxation agent oxygen, and thus likely inserted into the hydrophobic core of the lipid bilayer. However these residues are co-linear with amino acids in the interfacial region, so their extension into the hydrophobic core must be relatively shallow. EPR and structural data suggest that membrane interaction of COX-2 is also aided by partitioning of 4 aromatic amino acids, Phe(59), Phe(66), Tyr(76), and Phe(84) to the interfacial region, and by the electrostatic interactions of two basic amino acids, Arg(62) and Lys(64), with the phospholipid head groups.     

Roles of the P1, P2, and P3 residues in determining inhibitory specificity of kallistatin toward human tissue kallikrein

Kallistatin is a serpin with a unique P1 Phe, which confers an excellent inhibitory specificity toward tissue kallikrein. In this study, we investigated the P3-P2-P1 residues (residues 386-388) of human kallistatin in determining inhibitory specificity toward human tissue kallikrein by site-directed mutagenesis and molecular modeling. Human kallistatin mutants with 19 different amino acid substitutions at each P1, P2, or P3 residue were created and purified to compare their kallikrein binding activity. Complex formation assay showed that P1 Arg, P1 Phe (wild type), P1 Lys, P1 Tyr, P1 Met, and P1 Leu display significant binding activity with tissue kallikrein among the P1 variants. Kinetic analysis showed the inhibitory activities of the P1 mutants toward tissue kallikrein in the order of P1 Arg > P1 Phe > P1 Lys >/= P1 Tyr > P1 Leu >/= P1 Met. P1 Phe displays a better selectivity for human tissue kallikrein than P1 Arg, since P1 Arg also inhibits several other serine proteinases. Heparin distinguishes the inhibitory specificity of kallistatin toward kallikrein versus chymotrypsin. For the P2 and P3 variants, the mutants with hydrophobic and bulky amino acids at P2 and basic amino acids at P3 display better binding activity with tissue kallikrein. The inhibitory activities of these mutants toward tissue kallikrein are in the order of P2 Phe (wild type) > P2 Leu > P2 Trp > P2 Met and P3 Arg > P3 Lys (wild type). Molecular modeling of the reactive center loop of kallistatin bound to the reactive crevice of tissue kallikrein indicated that the P2 residue required a long and bulky hydrophobic side chain to reach and fill the hydrophobic S2 cleft generated by Tyr(99) and Trp(219) of tissue kallikrein. Basic amino acids at P3 could stabilize complex formation by forming electrostatic interaction with Asp(98J) and hydrogen bond with Gln(174) of tissue kallikrein. Our results indicate that tissue kallikrein is a specific target proteinase for kallistatin.     

Stabilizing nonpolar/polar side-chain interactions in the alpha-helix.

A simplistic, yet often used, view of protein stability is that amino acids attract other amino acids with similar polarity, whereas nonpolar and polar side chains repel. Here we show that nonpolar/polar interactions, namely Val or Ile bonding to Lys or Arg in alpha-helices, can in fact be stabilizing. Residues spaced i, i + 4 in alpha-helices are on the same face of the helix, with potential to favorably interact and stabilize the structure. We observe that the nonpolar/polar pairs Ile-Lys, Ile-Arg, and Val-Lys occur in protein helices more often than expected when spaced i, i + 4. Partially helical peptides containing pairs of nonpolar/polar residues were synthesized. Controls with i, i + 5 spacing have the residues on opposite faces of the helix and are less helical than the test peptides with the i, i + 4 interactions. Experimental circular dichroism results were analyzed with helix-coil theory to calculate the free energy for the interactions. All three stabilize the helix with DeltaG between -0.14 and -0.32 kcal x mol(-1). The interactions are hydrophobic with contacts between Val or Ile and the alkyl groups in Arg or Lys. Side chains such as Lys and Arg can thus interact favorably with both polar and nonpolar residues.     

Distribution of amino acids in a lipid bilayer from computer simulations

We have calculated the distribution in a lipid bilayer of small molecules mimicking 17 natural amino acids in atomistic detail by molecular dynamics simulation. We considered both charged and uncharged forms for Lys, Arg, Glu, and Asp. The results give detailed insight in the molecular basis of the preferred location and orientation of each side chain as well the preferred charge state for ionizable residues. Partitioning of charged and polar side chains is accompanied by water defects connecting the side chains to bulk water. These water defects dominate the energetic of partitioning, rather than simple partitioning between water and a hydrophobic phase. Lys, Glu, and Asp become uncharged well before reaching the center of the membrane, but Arg may be either charged or uncharged at the center of the membrane. Phe has a broad distribution in the membrane but Trp and Tyr localize strongly to the interfacial region. The distributions are useful for the development of coarse-grained and implicit membrane potentials for simulation and structure prediction. We discuss the relationship between the distribution in membranes, bulk partitioning to cyclohexane, and several amino acid hydrophobicity scales.     

Porcine spleen cathepsin H hydrolyzes oligopeptides solely by aminopeptidase activity

Cathepsin H purified from porcine spleens was studied for its specificity against various peptide and denatured protein substrates. The enzyme degraded all peptide substrates exclusively by an aminopeptidase activity. The enzyme preferentially released NH2-terminal amino acid residues with large hydrophobic (Phe, Trp, Leu, and Tyr) or basic (Arg and Lys) side chains. Amino acids containing small or polar side chains were not released. Peptides with a proline in the NH2-terminal or penultimate positions were not hydrolyzed either. Large polypeptides such as reduced and carboxymethylated soybean trypsin inhibitor and aldolase were not degraded. These results indicate that cathepsin H is an exopeptidase but not an endopeptidase. We propose that the biological role of this enzyme is the degradation of tissue proteins in lysosomes by its aminopeptidase activity.     

Relative reactivity of lysine and other peptide-bound amino acids to oxidation by hypochlorite

Antibacterial and inflammatory responses of neutrophils and macrophages produce hypochlorite as a major oxidant. Numerous side chains of amino acids found in extracellular proteins can be modified by hypochlorite, including His, Arg, Tyr, Lys, Trp, and Met. We studied the relative reactivity of each of these amino acid residues in short N-blocked peptides, where other residues in the peptide were highly resistant to hypochlorite attack. Hypochlorite treatment led to modified peptides in each case, which were detected by changes in retention on reversed-phase HPLC. A distinct single product, consuming two equivalents of hypochlorite per equivalent of peptide, was obtained from the Lys-containing peptides. UV spectroscopy, nuclear magnetic resonance (NMR), and electrospray/mass spectroscopy identified this product as the dichloramine at the epsilon-amino group of the Lys side chain. The dichloramine at Lys did not decompose to form a detectable amount of carbonyl reactive with dinitrophenylhydrazine. The dichloramine at Lys did however quantitatively revert back to Lys during HCl digestion of the tetrapeptide for amino acid analysis, with simultaneous modification of the adjacent Phe residue. The formation of the dichloramine at Lys was not blocked by peptides or acetylated amino acids that contained Tyr, His, or Arg. In contrast, the presence of equimolar Met-containing peptide, or N-Acetyl-Trp, both inhibited the formation of the dichloramine at Lys. Thus, Met and Trp side chains of proteins might be able to protect Lys from chloramine formation under some circumstances, but this interpretation must consider that Met and Trp are typically found in relatively inaccessible hydrophobic sites, whereas lysine is typically exposed on the protein surface. The hierarchy of amino acid reactivities examined here will aid in the prediction of residues in biological samples most likely to be modified by hypochlorite.     

The effect of changing the hydrophobic S1' subsite of thermolysin-like proteases on substrate specificity.

The hydrophobic S1' subsite is one of the major determinants of the substrate specificity of thermolysin and related M4 family proteases. In the thermolysin-like protease (TLP) produced by Bacillus stearothermophilus (TLP-ste), the hydrophobic S1' subsite is mainly formed by Phe130, Phe133, Val139 and Leu202. In the present study, we have examined the effects of replacing Leu202 by smaller (Gly, Ala, Val) and larger (Phe, Tyr) hydrophobic residues. The mutational effects showed that the wild-type S1' pocket is optimal for binding leucine side chains. Reduction of the size of residue 202 resulted in a higher efficiency towards substrates with Phe in the P1' position. Rather unexpectedly, the Leu202-->Phe and Leu202-->Tyr mutations, which were expected to decrease the size of the S1' subsite, resulted in a large increase in activity towards dipeptide substrates with Phe in the P1' position. This is probably due to the fact that 202Phe and 202Tyr adopt a second possible rotamer that opens up the subsite compared to Leu202, and also favours interactions with the substrate. To validate these results, we constructed variants of thermolysin with changes in the S1' subsite. Thermolysin and TLP-ste variants with identical S1' subsites were highly similar in terms of their preference for Phe vs. Leu in the P1' position.     

Lys40 but not Arg143 influences selectivity of angiotensin conversion by human alpha-chymase

Human alpha-chymase is an efficient angiotensin (AT) converting enzyme, selectively hydrolyzing AT I at Phe8 to generate bioactive AT II, which can promote cardiac hypertrophy, vascular stenosis, and hypertension. Some related enzymes, such as rat beta-chymase 1, are much less selective, destroying AT by cleaving at Tyr4. Comparisons of chymase structure and activity led to speculation that interaction between AT and the side chain of Lys40 or Arg143 accounts for the human enzyme's marked preference for Phe8 over Tyr4. To test these hypotheses, we compared AT hydrolysis by wild-type chymase with that by mutants changing Lys40 or Arg143 to neutral residues. Lys40 was exchanged for alanine, the residue found in canine alpha- and rat beta-chymase 1, the latter being dramatically less selective for hydrolysis at Phe8. Arg143 was exchanged for glutamine found in rat beta-chymase 1. The Lys40Ala mutant is a dog-like enzyme retaining strong preference for Phe8 but with Tyr4 hydrolytic rates enhanced 16-fold compared to wild-type human enzyme. Thus, of 40 residues mismatched between dog and human enzymes, a single residue accounts for most of the difference in specificity between them. The Arg143Gln mutant, contrary to prediction, remains highly Phe8-selective. Therefore, Lys40, but not Arg143, contributes to human chymase's remarkable preference for AT II generation over destruction.     

Human tissue kallikrein S1 subsite recognition of non-natural basic amino acids

We explored the unique substrate specificity of the primary S(1) subsite of human urinary kallikrein (hK1), which accepts both Phe and Arg, using internally quenched fluorescent peptides Abz-F-X-S-R-Q-EDDnp and Abz-G-F-S-P-F-X-S-S-R-P-Q-EDDnp [Abz is o-aminobenzoic acid; EDDnp is N-(2,4-dinitrophenyl)ethylenediamine], which were based on the human kininogen sequence at the C-terminal region of bradykinin. Position X, which in natural sequence stands for Arg, received the following synthetic basic non-natural amino acids: 4-(aminomethyl)phenylalanine (Amf), 4-guanidine phenylalanine (Gnf), 4-(aminomethyl)-N-isopropylphenylalanine (Iaf), N(im)-(dimethyl)histidine [H(2Me)], 3-pyridylalanine (Pya), 4-piperidinylalanine (Ppa), 4-(aminomethyl)cyclohexylalanine (Ama), and 4-(aminocyclohexyl)alanine (Aca). Only Abz-F-Amf-S-R-Q-EDDnp and Abz-F-H(2Me)]-S-R-Q-EDDnp were efficiently hydrolyzed, and all others were resistant to hydrolysis. However, Abz-F-Ama-S-R-Q-EDDnp inhibited hK1 with a K(i) of 50 nM with high specificity compared to human plasma kallikrein, thrombin, plasmin, and trypsin. The Abz-G-F-S-P-F-X-S-S-R-P-Q-EDDnp series were more susceptible to hK1, although the peptides with Gnf, Pya, and Ama were resistant to it. Unexpectedly, the peptides in which X is His, Lys, H(2Me), Amf, Iaf, Ppa, and Aca were cleaved at amino or at carboxyl sites of these amino acids, indicating that the S(1)' subsite has significant preference for basic residues. Human plasma kallikrein did not hydrolyze any peptide of this series except the natural sequence where X is Arg. In conclusion, the S(1) subsite of hK1 accepts amino acids with combined basic and aromatic side chain, although for the S(1)-P(1) interaction the preference is for aliphatic and basic side chains.     

HIV-1 Protease Uses Bi-Specific S2/S2′ Subsites to Optimize Cleavage of Two Classes of Target Sites

Retroviral proteases (PRs) have a unique specificity that allows cleavage of sites with or without a P1′ proline. A P1′ proline is required at the MA/CA cleavage site due to its role in a post-cleavage conformational change in the capsid protein. However, the HIV-1 PR prefers to have large hydrophobic amino acids flanking the scissile bond, suggesting that PR recognizes two different classes of substrate sequences. We analyzed the cleavage rate of over 150 combinations of six different HIV-1 cleavage sites to explore rate determinants of cleavage. We found that cleavage rates are strongly influenced by the two amino acids flanking the amino acids at the scissile bond (P2–P1/P1′–P2′), with two complementary sets of rules. When P1′ is proline, the P2 side chain interacts with a polar region in the S2 subsite of the PR, while the P2′ amino acid interacts with a hydrophobic region of the S2′ subsite. When P1′ is not proline, the orientations of the P2 and P2′ side chains with respect to the scissile bond are reversed; P2 residues interact with a hydrophobic face of the S2 subsite, while the P2′ amino acid usually engages hydrophilic amino acids in the S2′ subsite. These results reveal that the HIV-1 PR has evolved bi-functional S2 and S2′ subsites to accommodate the steric effects imposed by a P1′ proline on the orientation of P2 and P2′ substrate side chains. These results also suggest a new strategy for inhibitor design to engage the multiple specificities in these subsites.     

Caspase-3 binds diverse P4 residues in peptides as revealed by crystallography and structural modeling

Caspase-3 recognition of various P4 residues in its numerous protein substrates was investigated by crystallography, kinetics, and calculations on model complexes. Asp is the most frequent P4 residue in peptide substrates, although a wide variety of P4 residues are found in the cellular proteins cleaved by caspase-3. The binding of peptidic inhibitors with hydrophobic P4 residues, or no P4 residue, is illustrated by crystal structures of caspase-3 complexes with Ac-IEPD-Cho, Ac-WEHD-Cho, Ac-YVAD-Cho, and Boc-D(OMe)-Fmk at resolutions of 1.9–2.6 Å. The P4 residues formed favorable hydrophobic interactions in two separate hydrophobic regions of the binding site. The side chains of P4 Ile and Tyr form hydrophobic interactions with caspase-3 residues Trp206 and Trp214 within a non-polar pocket of the S4 subsite, while P4 Trp interacts with Phe250 and Phe252 that can also form the S5 subsite. These interactions of hydrophobic P4 residues are distinct from those for polar P4 Asp, which indicates the adaptability of caspase-3 for binding diverse P4 residues. The predicted trends in peptide binding from molecular models had high correlation with experimental values for peptide inhibitors. Analysis of structural models for the binding of 20 different amino acids at P4 in the aldehyde peptide Ac-XEVD-Cho suggested that the majority of hydrophilic P4 residues interact with Phe250, while hydrophobic residues interact with Trp206, Phe250, and Trp214. Overall, the S4 pocket of caspase-3 exhibits flexible adaptation for different residues and the new structures and models, especially for hydrophobic P4 residues, will be helpful for the design of caspase-3 based drugs.     

Substrate binding mode and its implication on drug design for botulinum neurotoxin A

The seven antigenically distinct serotypes of Clostridium botulinum neurotoxins, the causative agents of botulism, block the neurotransmitter release by specifically cleaving one of the three SNARE proteins and induce flaccid paralysis. The Centers for Disease Control and Prevention (CDC) has declared them as Category A biowarfare agents. The most potent among them, botulinum neurotoxin type A (BoNT/A), cleaves its substrate synaptosome-associated protein of 25 kDa (SNAP-25). An efficient drug for botulism can be developed only with the knowledge of interactions between the substrate and enzyme at the active site. Here, we report the crystal structures of the catalytic domain of BoNT/A with its uncleavable SNAP-25 peptide (197)QRATKM(202) and its variant (197)RRATKM(202) to 1.5 A and 1.6 A, respectively. This is the first time the structure of an uncleavable substrate bound to an active botulinum neurotoxin is reported and it has helped in unequivocally defining S1 to S5' sites. These substrate peptides make interactions with the enzyme predominantly by the residues from 160, 200, 250 and 370 loops. Most notably, the amino nitrogen and carbonyl oxygen of P1 residue (Gln197) chelate the zinc ion and replace the nucleophilic water. The P1'-Arg198, occupies the S1' site formed by Arg363, Thr220, Asp370, Thr215, Ile161, Phe163 and Phe194. The S2' subsite is formed by Arg363, Asn368 and Asp370, while S3' subsite is formed by Tyr251, Leu256, Val258, Tyr366, Phe369 and Asn388. P4'-Lys201 makes hydrogen bond with Gln162. P5'-Met202 binds in the hydrophobic pocket formed by the residues from the 250 and 200 loop. Knowledge of interactions between the enzyme and substrate peptide from these complex structures should form the basis for design of potent inhibitors for this neurotoxin.     

Side-chain flexibility in proteins upon ligand binding

Ligand binding may involve a wide range of structural changes in the receptor protein, from hinge movement of entire domains to small side-chain rearrangements in the binding pocket residues. The analysis of side chain flexibility gives insights valuable to improve docking algorithms and can provide an index of amino-acid side-chain flexibility potentially useful in molecular biology and protein engineering studies. In this study we analyzed side-chain rearrangements upon ligand binding. We constructed two non-redundant databases (980 and 353 entries) of "paired" protein structures in complexed (holo-protein) and uncomplexed (apo-protein) forms from the PDB macromolecular structural database. The number and identity of binding pocket residues that undergo side-chain conformational changes were determined. We show that, in general, only a small number of residues in the pocket undergo such changes (e.g., approximately 85% of cases show changes in three residues or less). The flexibility scale has the following order: Lys > Arg, Gln, Met > Glu, Ile, Leu > Asn, Thr, Val, Tyr, Ser, His, Asp > Cys, Trp, Phe; thus, Lys side chains in binding pockets flex 25 times more often then do the Phe side chains. Normalizing for the number of flexible dihedral bonds in each amino acid attenuates the scale somewhat, however, the clear trend of large, polar amino acids being more flexible in the pocket than aromatic ones remains. We found no correlation between backbone movement of a residue upon ligand binding and the flexibility of its side chain. These results are relevant to 1. Reduction of search space in docking algorithms by inclusion of side-chain flexibility for a limited number of binding pocket residues; and 2. Utilization of the amino acid flexibility scale in protein engineering studies to alter the flexibility of binding pockets.     

Growth requirements of hyperthermophilic sulfur-dependent heterotrophic archaea isolated from a shallow submarine geothermal system with reference to their essential amino acids.

Three hyperthermophilic sulfur-dependent heterotrophs were isolated from a shallow submarine hydrothermal system at an inlet of Kodakara-jima island, Kagoshima, Japan. The isolates grew at 60 to 97 degrees C, with the optimum temperatures at 85 to 90 degrees C. Sensitivity to rifampin and the existence of ether lipids indicated that the isolates are hyperthermophilic archaea. Partial sequencing of the genes coding for 16S rRNA showed that the three isolates are closely related to the genus Thermococcus. They grew on proteinaceous mixtures, such as yeast extract, Casamino Acids, and purified proteins (e.g., casein and gelatin), but not on carbohydrates or organic acids as sole carbon and energy sources. Nine amino acids were essential for growth of isolate KS-1 (Thr, Leu, Ile, Val, Met, Phe, His, Tyr, and Arg). Isolate KS-2 required Lys in addition to the nine amino acids, and KS-8 required Lys instead of Tyr. In comparative studies, it was shown that Thermococcus celer DSM 2476 required 10 amino acids (Thr, Leu, Ile, Val, Met, Phe, Tyr, Trp, Lys, and Arg) while Pyrococcus furiosus DSM 3638 required only Ile and Val. The hyperthermophilic fermentative eubacterium Thermotoga neapolitana DSM 4359 did not require any amino acids for growth.     

Substrate specificity of insect trypsins and the role of their subsites in catalysis

Trypsins have high sequence similarity, although the responses of insect trypsins to chemical and natural inhibitors suggest they differ in specificities. Purified digestive trypsins from insects of four different orders were assayed with internally quenched fluorescent oligopeptides with two different amino acids at P1 (Arg/Lys) and 15 amino acid replacements in positions P1', P2', P2, and P3. The binding energy (deltaG(s), calculated from Km values) and the activation energy (deltaG(T)(double dagger), determined from kcat/Km values) were calculated. Dictyoptera, Coleoptera and Diptera trypsins hydrolyze peptides with Arg at P1 at least 3 times more efficiently than peptides with Lys at P1, whereas Lepidoptera trypsins have no preference between Arg and Lys at that position. The hydrophobicities of each subsite were calculated from the efficiency of hydrolysis of the different amino acid replacements at that subsite. The results suggested that insect trypsin subsites become progressively more hydrophobic along evolution. Apparently, this is an adaptation to resist plant protein inhibitors, which usually have polar residues at their reactive sites. Results also suggested that, at least in lepidopteran trypsins, S3, S2, S1', and S2' significantly bind the substrate ground state, whereas in the transition state only S1' and S2' do that, supporting aspects of the presently accepted mechanism of trypsin catalysis. Homology modeling showed differences among those trypsins that may account for the varied kinetic properties.     

Structure-based statistical analysis of transmembrane helices

Recent advances in determination of the high-resolution structure of membrane proteins now enable analysis of the main features of amino acids in transmembrane (TM) segments in comparison with amino acids in water-soluble helices. In this work, we conducted a large-scale analysis of the prevalent locations of amino acids by using a data set of 170 structures of integral membrane proteins obtained from the MPtopo database and 930 structures of water-soluble helical proteins obtained from the protein data bank. Large hydrophobic amino acids (Leu, Val, Ile, and Phe) plus Gly were clearly prevalent in TM helices whereas polar amino acids (Glu, Lys, Asp, Arg, and Gln) were less frequent in this type of helix. The distribution of amino acids along TM helices was also examined. As expected, hydrophobic and slightly polar amino acids are commonly found in the hydrophobic core of the membrane whereas aromatic (Trp and Tyr), Pro, and the hydrophilic amino acids (Asn, His, and Gln) occur more frequently in the interface regions. Charged amino acids are also statistically prevalent outside the hydrophobic core of the membrane, and whereas acidic amino acids are frequently found at both cytoplasmic and extra-cytoplasmic interfaces, basic amino acids cluster at the cytoplasmic interface. These results strongly support the experimentally demonstrated biased distribution of positively charged amino acids (that is, the so-called the positive-inside rule) with structural data.     

Chromogenic substrates of bovine beta-trypsin: the influence of an amino acid residue in P1 position on their interaction with the enzyme

The Cucurbita maxima trypsin inhibitor CMTI-III molecule was used as a vehicle to design and synthesize a series of trypsin chromogenic substrates modified in position P1: Ac-Ala-Val-Abu-Pro-X-pNA, where X = Orn, Lys, Arg, Har, Arg(NO(2)), Cit, Hci, Phe(p-CN), Phe(p-NH(2)); pNA = p-nitroanilide. The most active compounds (as determined by specificity constant k(cat)/K(m)) were peptides with the Arg and Lys residues in the position discussed. Changes in the length and the decrease of the positive charge of the amino acid residue side chain in position P(1) resulted in the decrease or loss of the affinity towards bovine beta-trypsin. Among peptides containing amino acid residues with uncharged side chains in position P1, only one with p-cyano-l-Phe revealed activity. These results correspond well with trypsin inhibitory activity of CMTI-III analogues modified in the equivalent position, indicating the same type of interaction between position P1 of the substrate or inhibitor and S1 site specificity of trypsin.     

The amino acid sequence of human chorionic gonadotropin. The alpha subunit and beta subunit.

The amino acid sequences of both the alpha and beta subunits of human chorionic gonadotropin have been determined. The amino acid sequence of the alpha subunit is: Ala - Asp - Val - Gln - Asp - Cys - Pro - Glu - Cys-10 - Thr - Leu - Gln - Asp - Pro - Phe - Ser - Gln-20 - Pro - Gly - Ala - Pro - Ile - Leu - Gln - Cys - Met - Gly-30 - Cys - Cys - Phe - Ser - Arg - Ala - Tyr - Pro - Thr - Pro-40 - Leu - Arg - Ser - Lys - Lys - Thr - Met - Leu - Val - Gln-50 - Lys - Asn - Val - Thr - Ser - Glu - Ser - Thr - Cys - Cys-60 - Val - Ala - Lys - Ser - Thr - Asn - Arg - Val - Thr - Val-70 - Met - Gly - Gly - Phe - Lys - Val - Glu - Asn - His - Thr-80 - Ala - Cys - His - Cys - Ser - Thr - Cys - Tyr - Tyr - His-90 - Lys - Ser. Oligosaccharide side chains are attached at residues 52 and 78. In the preparations studied approximately 10 and 30% of the chains lack the initial 2 and 3 NH2-terminal residues, respectively. This sequence is almost identical with that of human luteinizing hormone (Sairam, M. R., Papkoff, H., and Li, C. H. (1972) Biochem. Biophys. Res. Commun. 48, 530-537). The amino acid sequence of the beta subunit is: Ser - Lys - Glu - Pro - Leu - Arg - Pro - Arg - Cys - Arg-10 - Pro - Ile - Asn - Ala - Thr - Leu - Ala - Val - Glu - Lys-20 - Glu - Gly - Cys - Pro - Val - Cys - Ile - Thr - Val - Asn-30 - Thr - Thr - Ile - Cys - Ala - Gly - Tyr - Cys - Pro - Thr-40 - Met - Thr - Arg - Val - Leu - Gln - Gly - Val - Leu - Pro-50 - Ala - Leu - Pro - Gin - Val - Val - Cys - Asn - Tyr - Arg-60 - Asp - Val - Arg - Phe - Glu - Ser - Ile - Arg - Leu - Pro-70 - Gly - Cys - Pro - Arg - Gly - Val - Asn - Pro - Val - Val-80 - Ser - Tyr - Ala - Val - Ala - Leu - Ser - Cys - Gln - Cys-90 - Ala - Leu - Cys - Arg - Arg - Ser - Thr - Thr - Asp - Cys-100 - Gly - Gly - Pro - Lys - Asp - His - Pro - Leu - Thr - Cys-110 - Asp - Asp - Pro - Arg - Phe - Gln - Asp - Ser - Ser - Ser - Ser - Lys - Ala - Pro - Pro - Pro - Ser - Leu - Pro - Ser-130 - Pro - Ser - Arg - Leu - Pro - Gly - Pro - Ser - Asp - Thr-140 - Pro - Ile - Leu - Pro - Gln. Oligosaccharide side chains are found at residues 13, 30, 121, 127, 132, and 138. The proteolytic enzyme, thrombin, which appears to cleave a limited number of arginyl bonds, proved helpful in the determination of the beta sequence.