A differential environmental effect on human anterior tooth size

Factor-analytic studies of human tooth size routinely exhibit separate factors for the mesiodistal and buccolingual dimensions of anterior teeth but a single factor each for premolar and molar size. This observed independence within the anterior field is shown to be attributable to a much larger effect of environmental factors on the buccolingual vs. the mesiodistal diameters, a significant cause of which may be calculus accumulation hitherto unrecognized in the relevant literature. The heritability of dental dimensions is also discussed.     

Sexual dimorphism in crown units of mandibular deciduous and permanent molars in Australian Aborigines.

Sexual differences in the crown units of mandibular molars were investigated in Australian Aborigines. The first and second deciduous molars (dm1 and dm2), and first to third permanent molars (M1, M2 and M3) were measured on dental casts using a sliding caliper. Measurements of tooth crowns included overall mesiodistal and buccolingual diameters, as well as the mesiodistal and buccolingual diameters of the trigonid and talonid. Percentage dimorphism values were greater in the talonid dimensions than the trigonid, indicating that sex differences tend to be larger in the later-developing crown units. Sex differences in mesiodistal diameters increased from dm1 to M2 but decreased for M3, the tooth that showed the least dimorphism of all the molars. This result seems to be due to the marked variability in size of the M3 between individuals.     

The relationship of dental crowding to tooth size, dental arch width, and arch depth

This study was undertaken to answer the question, "Are there any differences in the mesiodistal tooth diameters, dental arch width and dental arch depth between the crowded and noncrowded dentitions?" The materials submitted for study consisted of the Orthoscan intraoral occlusograms of 89 subjects with well-aligned dentition and those of 74 subjects with gross dental crowding. The tooth size and arch dimensions were measured from these intraoral occlusograms. The data were subjected to statistical treatment for comparison of noncrowded and crowded groups. The findings in this study lead to the following conclusions: The mesiodistal tooth diameters of the crowded group were significantly larger than those of the noncrowded group. The dental arch widths of the crowded group were significantly smaller than those of the noncrowded group. No substantial or significant difference in dental arch depth between the crowded and noncrowded subjects could be noted. From these findings it seems that tooth size and dental arch width are determining factors in the formation of dental crowding. Clinically, these results suggest that in the treatment of dental crowding, extraction of teeth and/or expansion of dental arches should be considered depending on what is the main causative factor.     

Tooth size and arcadal length correlates in man

Intra-arcadal mesiodistal and buccolingual tooth size correlations were evaluated in a sample of 125 caucasoids with ideal occlusion. Dental dimensions were corrected for arcade mength (as a measure of jaw size) by a series of regression analyses of each mesiodistal dimension on the sum of the mesiodistal dimensions within each arcade. Regression coefficients of tooth dimension on arcade length were calculated to gain an insight into the dimensional sensitivity of individual teeth to arcade length variation. The data presented here suggest a strong association between arcadal length (jaw size) dependence, and the dimensional stability of individual teeth. When corrected for arcade length, a definite pattern of tooth size correlation emerges: postcanine maxillary and mandibular teeth are negatively correlated to the anterior teeth and are positively correlated to one another. The hypothesis is developed that anterior and postcanine teeth should be viewed as two separate and negatively size-correlated units, beyond the boundaries of the four morphological tooth classes. Recognition of this basic dichotomous size arrangement within each jaw allows for a reassessment of some of the problems associated with hominid dental evolution.     

Individual variation in enamel structure of human mandibular first premolars

Nine human mandibular first premolars were examined to assess variation in external morphology and enamel structural organization within a tooth type. The relationship of enamel ultrastructure to gross dental morphology was also studied. The teeth were cut in the mesiodistal direction just lingual to the buccal cusp, and etched. Montages were constructed of the cut enamel surface photographed in the scanning electron microscope at 100 X magnification. Parameters were measured and correlation coefficients were calculated for the comparison of various odontometric features. The mesiodistal and buccolingual dimensions were highly correlated and the occlusal thickness of enamel was significantly correlated to crown height but not crown width. Hunter-Schreger bands were less pronounced in fossa areas than at lateral aspects, cusps, or ridges; these bands were directly related to the geometry of the tooth. It was concluded that within this tooth type, there is a large amount of individual variation not only in gross morphology but also in enamel ultrastructure. This result underscores the fact that interspecific comparisons must be made with care.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

Tissue contributions to sex and race: differences in tooth crown size of deciduous molars.

This study describes size of constituent deciduous tooth crown components (enamel, dentine, and pulp) to address the manner in which males characteristically have larger teeth than females, and the observation that teeth of American blacks are larger than those of American whites. Measurements were collected (n = 333 individuals) from bitewing radiographs using computer-aided image analysis. Tissue thicknesses (enamel, dentine, pulp) were measured at the crown's mesial and distal heights of contour. Deciduous mesiodistal molar crown length is composed of about 1/7 enamel, 1/3 dentine, and 1/2 pulp. Details differ by tooth type, but males typically have significantly larger dentine and pulp dimensions than females; there is no sexual dimorphism in marginal enamel thickness. Males scale isometrically with females for all variables tested here. Blacks significantly exceed whites in size of all tissues, but tissue types scale isometrically with blacks and whites with one exception: enamel thickness is disproportionately thick in blacks. While the absolute difference is small (5.56 mm of enamel in blacks summed over all four deciduous molar tooth types vs. 5.04 mm in whites), the statistical difference is considerable (P < 0.001). Aside from enamel, crown size in blacks is increased proportionately vis-à-vis whites. Principal components analysis confirmed these univariate relationships and emphasizes the statistical independence of crown component thicknesses, which is in keeping with the sequential growth and separate embryonic origins of the tissues contributing to a tooth crown. Results direct attention to the rates of enamel and dentine deposition (of which little is known), since the literature suggests that blacks (with larger crowns and thicker enamel) spend less time in tooth formation than whites.     

Reduced tooth size in 45,X (Turner syndrome) females

Mean values and variances of deciduous and permanent tooth dimensions were compared between 121 45,X (Turner syndrome) females and 171 control subjects to clarify the role of the X chromosome on dental development. Although deciduous molars tended to be smaller than normal in 45,X females, there was no evidence of a reduction in tooth size for deciduous anterior teeth. In the permanent dentition, all mesiodistal dimensions were significantly smaller in 45,X females but only some of the buccolingual dimensions were smaller. The findings for deciduous tooth-size may reflect a sampling effect related to the extremely high frequency of spontaneous abortion in 45,X individuals. Results for permanent teeth are consistent with the concept of a decrease in enamel thickness in 45,X females.     

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.     

Studies on agenesis in the permanent dentition

Tooth dimensions in 104 males and females with agenesis of one or more permanent teeth, other than third molars, have been examined. The amounts of size reduction from normal in mesiodistal and buccolingual tooth diameters appear to be independent. Also some apparent differences from normal tooth size variability were noted. Interestingly, first molars and canines, both considered to be stable components of the dentition, showed significant variability in tooth size. In addition the incidence of individual tooth agenesis within this sample was noted and maxillary lateral incisor was most frequently absent in both sexes.     

A twin study of dental dimension. II. Independent genetic determinants

To demonstrate the presence of independent genetic determinants of multiple correlated tooth dimensions from twin data, a multivariate analysis was performed on the covariance matrices of monozygotic and dizygotic within-pair differences for mesiodistal and buccolingual dimensions of 28 teeth of the secondary dentition. The results provided strong evidences that the correlation among tooth dimensions is primarily genetic in origin, probably attributable to the pleiotropic action of either independent genes or groups of genes. Among the genetic factors that were identified, one appeared to affect the maxillary teeth in general while a second influenced primarily the anterior mandibular teeth. There was a striking tendency for homologous measurements on the right and left sides to be associated with the same genetic factor. In contrast, genetic determination of the maxillary and mandibular dentition seemed to be independent of each other, and a wider range of genetic factors were found to influence the mandibular than the maxillary teeth, suggesting that a differential degree of evolutionary stability may have been achieved in the teeth of the two jaws.     

Crown dimensions of deciduous teeth from pre-Columbian Peru

The mean mesiodistal and buccolingual diameters are presented for the deciduous teeth from Pre-Columbian Peru. Generally, the deciduous teeth from Pre-Columbian Peru are larger in most dimensions than the deciduous teeth of modern populations of European descent and smaller than those of modern Australian aboriginals. Differences in crown dimensions between the Pre-Columbian Peruvian deciduous teeth and those from Prehistoric Inamgaon and Mesolithic Europe are inconsistent. However, the maxillary and mandibular second molars are larger in the Peruvian population while the incisors are smaller. Since comparative data for prehistoric deciduous teeth are rare, this paper adds valuable data to the growing literature on deciduous crown dimensions.     

Decreased odontometric sex difference in individuals with dental agenesis

Partial Dental Agenesis has been shown related to decreased mesiodistal tooth size. The sexual difference in permanent tooth size of 104 normal individuals with congenital absence of one or more secondary teeth has been studied. Males are observed to have more mesiodistal size reduction than females. In only two of 14 tooth types examined was a statistical sex difference in mesiodistal size shown. It is of interest that each of these was in the canine field area. A sex difference was slightly more apparent when studying the buccolingual dimension; however, several difficulties were encountered in obtaining measurements in this diameter.     

Development and size of the teeth of Macaca mulatta.

A cross-sectional sample of 151 skulls from Macaca mulatta of known age and similar rearing in U.S. Primate Centers was analyzed to determine age-related "norms" of stages of development and size of teeth. The stages of development from the follicle of a deciduous incisor in the fetus to completion of the root with apex closed of the permanent third molar were related to age. The age range observed for eruption of each tooth was noted and related to its stage of development. The crown of each erupted tooth was found to be completely developed, but growth of its root continued for a longer, indeterminate period. When a deciduous tooth was exfoliated, the crown of the permanent successor was found to be completed and root growth had begun. Measurements of both mesiodistal and faciolingual diameters and of crown length of the teeth in situ and of total length and root length on roentgenograms were examined for sexual dimorphism. The faciolingual diameter of the deciduous mandibular second incisor and of both second molars showed the greatest sexual dimorphism among both diameters of all deciduous teeth. The mesiodistal and faciolingual diameters of the mandibular premolars were found to be the best dimensions in discriminant functions for identifying sex in the absence of permanent canines.     

Family studies of tooth size factors in the permanent dentition.

Correlations between dimensions of the permanent teeth in Australian Aboriginals were studied by factor analysis to disclose the main sources of shared variability. Findings indicated that in both males and females most of the common variability in the tooth dimensions could be accounted for by factors representing mesiodistal size of anterior teeth, buccolingual size of anterior teeth, generalized size of the premolars and generalized size of the molars. Factor scores derived from the analysis were used to calculate intraclass correlations among brothers and among sisters. These correlations tended to be higher for the factors contributing most to the common variability indicating that the factors might represent fields under direct genetic control. There was no trend for intraclass correlations among siblings derived from multivariate scores to be consistently higher than those based on observed tooth dimensions. The main advantage to the user of factor analysis is the ability to interpret associations between interrelated variables more objectively than is possible by conventional correlation methods.     

The effect of prenatal factors on crown dimensions

As shown in 870 white participants in the National Collaborative Perinatal Project (NCPP), maternal health status during pregnancy and birth size are systematically related to mesiodistal and buccolingual crown dimensions of I1, I2, dc, dm1, dm2 and M1. Maternal diabetes, maternal hypothyroidism and large size at birth are associated with larger maxillary and mandibular teeth in white children. Conversely, deciduous and permanent crown diameters are diminished in maternal hypertension, and in low birthweight and small birth-length conditions. These findings suggest that maternal and fetal (or gestational) determinants of both deciduous and permanent tooth crown dimensions may account for as much as half of crown-size variability with major implications to population comparisons and historical odontometric differences and trends.     

Data on morphometric analysis of anterior teeth from Hazaribag College of Dental Sciences and Hospital,jharkhand

It is of interest to document data on morphometric (measurement of external form) analysis of maxillary and mandibular anterior teeth collected from a dental set up using mesio-distal (MD) dimension. The mesiodistal dimensions of all permanent anterior teeth (central incisor, lateral incisor and canine) of 25 males and 25 females patients were recorded using digital vernier calipers. Data were charted and statistical analysis was done using Mann Whitney U test. Data shows sexual dimorphism for every tooth between males and females. However, dimorphism was exhibited only in maxillary and mandibular canine, mandibular central incisors, and lateral incisor. Hence,odontometric parameters offer simple, reliable and cost-effective in forensic investigation for recording gender discrimination.     

Sexual dimorphism of root length on a Greek population sample

Sexual dimorphism in teeth has been an area of research for osteoarchaeologists and forensic anthropologists studying human skeletal remains. As most studies have been based on the mesiodistal and buccolingual crown measurements, sexual dimorphism from root length dimensions remains “neglected” by comparison to crown dimensions. The aim of the present study was to test the existence of sexual dimorphism in the root length of single-rooted teeth with the purpose of investigating whether maximum root length can be reliably used to determine sex. A total of 774 permanent teeth in 102 individuals (58 males and 44 females) from the Athens Collection were examined. The maximum root length of each tooth was measured on the mesial, distal, buccal, and lingual side. Almost all teeth presented a high degree of sexual dimorphism with males showing numerically higher values in root length than females. The most dimorphic teeth were the maxillary second incisors followed by maxillary canines. The percentage of sexual dimorphism reached 16.56%, with maxillary teeth showing the highest degree of dimorphism. The classification results show that the overall correctly specified group percentage ranged from 58.6% to 90.0%. The data generated from this study suggest that root length measurements offer a reliable method for determining sex and are therefore useful in osteoarchaeological studies, particularly in cases of fragmented or cremated material, but also in forensic contexts. Moreover, root length can be used to separate the remains of female and male subadult individuals with a high level of accuracy thus addressing one of the most problematic issues in human osteoarchaeology and anthropology as immature skeletons are the most difficult to sex.     

Fluctuating dental asymmetry: Variation among skeletal populations

Recent investigations have shown that nongenetic, environmental factors can adversely affect dental growth and produce bilateral asymmetries in tooth size. When asymmetries do not favor either side, i.e., absence of directional asymmetry, the condition is termed fluctuating asymmetry. Fluctuating asymmetry of the mesiodistal and buccolingual dimensions of the total permanent dentition was compared among human skeletal populations which differ socio-economically and nutritionally. Odontometric data were collected from prehistoric hunters (Indian Knoll site), later aboriginal farming groups (Campbell and Larson sites), and a modern cadaver population (Hamann-Todd). The magnitude of asymmetry is expressed by the familiar correlation coefficient, r. The proportion, then, of intra-individual variation due to fluctuating asymmetry is equal to 1-r. With Wilcoxon's signed ranks test on the correlation coefficients no significant sex difference was shown within populations. Among groups, though, Indian Knoll was the most odontometrically asymmetrical; moreover, within Indian Knoll, the taller and ostensibly better nourished individuals had larger, less asymmetrical teeth than the shorter individuals. These results suggest that environmentally mediated growth disturbance may be sensitively reflected by dental asymmetry. A population exhibiting other signs of severe growth disturbance, e.g., enamel hypoplasia and Harris lines, was the most dentally asymmetrical.     

Morphology of Liberian Negro deciduous teeth I. Odontometry

An odontometric study of the deciduous teeth of 21 Liberian Negro children is reported. These data were obtained from dental casts alone. Statistical comparisons were made of the mesiodistal diameter alone with two American White populations and the three Japanese populations. Maxillary teeth, with the exception of the cuspids were larger in the Negro sample, while only the Negro mandibular molars were significantly wider. This situation resulted in an alteration of Negro maxillary tooth size order. Comparisons were made with other populations reported in the literature which led us to stress the fact that, as yet, no satisfactory sample of deciduous tooth measurements are available for any population. A discussion of tooth form differences stresses the point that teeth differ in both attributes of form, i.e., in shape as well as in size between the several major racial groups. The processes by which these shape differences are brought about were discussed and it was suggested that differing relative growth rates may well be one cause. An allometric analysis of fetal molar tooth growth showed, again, that a sharp interphase occurs in all teeth, with a subsequent decrease in specific growth rate. This interphase corresponds to the initiation of cuspal calcification.