Reproducible fashion of the HSP70B' promoter‐induced cytotoxic response on a live cell‐based biosensor by cell cycle synchronization

Live cell‐based sensors potentially provide functional information about the cytotoxic effect of reagents on various signaling cascades. Cells transfected with a reporter vector derived from a cytotoxic response promoter can be used as intelligent cytotoxicity sensors (i.e., sensor cells). We have combined sensor cells and a microfluidic cell culture system that can achieve several laminar flows, resulting in a reliable high‐throughput cytotoxicity detection system. These sensor cells can also be applied to single cell arrays. However, it is difficult to detect a cellular response in a single cell array, due to the heterogeneous response of sensor cells. The objective of this study was cell homogenization with cell cycle synchronization to enhance the response of cell‐based biosensors. Our previously established stable sensor cells were brought into cell cycle synchronization under serum‐starved conditions and we then investigated the cadmium chloride‐induced cytotoxic response at the single cell level. The GFP positive rate of synchronized cells was approximately twice as high as that of the control cells, suggesting that cell homogenization is an important step when using cell‐based biosensors with microdevices, such as a single cell array. Biotechnol. Bioeng. 2010;107: 561–565. © 2010 Wiley Periodicals, Inc.     

Fluorescence optical detection in situ for real‐time monitoring of cytochrome P450 enzymatic activity of liver cells in multiple microfluidic devices

We describe an in situ fluorescence optical detection system to demonstrate real‐time and non‐invasive detection of reaction products in a microfluidic device while under perfusion within a standard incubator. The detection system is designed to be compact and robust for operation inside a mammalian cell culture incubator for quantitative detection of fluorescent signal from microfluidic devices. When compared to a standard plate reader, both systems showed similar biphasic response curves with two linear regions. Such a detection system allows real‐time measurements in microfluidic devices with cells without perturbing the culture environment. In a proof‐of‐concept experiment, the cytochrome P450 1A1/1A2 activity of a hepatoma cell line (HepG2/C3A) was monitored by measuring the enzymatic conversion of ethoxyresorufin to resorufin. The hepatoma cell line was embedded in Matrigel^TM construct and cultured in a microfluidic device with medium perfusion. The response of the cells, in terms of P450 1A1/1A2 activity, was significantly different in a plate well system and the microfluidic device. Uninduced cells showed almost no activity in the plate assay, while uninduced cells in Matrigel^TM with perfusion in a microfluidic device showed high activity. Cells in the plate assay showed a significant response to induction with 3‐Methylcholanthrene while cells in the microfluidic device did not respond to the inducer. These results demonstrate that the system is a potentially useful method to measure cell response in a microfluidic system. Biotechnol. Bioeng. 2009; 104: 516–525 © 2009 Wiley Periodicals, Inc.     

Live cells-based cytotoxic sensorchip fabricated in a microfluidic system

We report here a live cells-based sensorchip fabricated in microfluidic channels in which several laminar flows were achieved. In addition, we established a cytotoxic sensor cell line, which was transfected with a green fluorescence protein (GFP) plasmid derived from the heat shock protein 70B' (HSP70B') promoter, which is induced by cytotoxic reagents. The fluorescence in the sensor cells increased in a CdCl(2) dose-dependent manner in the microfluidic channels. In this system, cytotoxic reagents can be quantitatively detected in a quick, sensitive and high-throughput manner. The combination of sensor cells and microfluidic systems will provide an important basis for the development of micro-total analysis systems (micro-TAS) technology, and can be applied to toxicology, environmental assessment and drug screening.     

Feasibility study of an online toxicological sensor based on the optical waveguide technique.

Morphological properties of the cells often change as an early response to the presence of a pharmacologically acting toxic substance [Etcheverry, S.B., Crans, D.C., Keramidas, A.D., Cortizo, A.M., Arch. Biochem. Biophys. 338 (1997) 7-14]. Recently it has been shown that living animal cell adhesion and spreading can be monitored online and quantitatively via the interaction of the cells with the evanescent electromagnetic field present at the surface of an optical waveguide [Ramsden, J.J., Li, S.Y., Heinzle, E., Prinosil, J.E. Cytometry 19 (1995) 97-102]. In the present study, optical waveguide lightmode spectroscopy (OWLS) and confocal laser scanning microscopy (CLSM), which provides information about the shape of the cells at the surface, were compared under identical experimental conditions. This allowed for the correlation between the cell-shape information from CLSM and the cell-surface interaction measurements from OWLS. The proposed design of the microsystem sensor involves the establishment of a cell layer on the surface of the waveguide and the subsequent online measurement of the morphological response of the cells to various toxic substances. In the present study, the setup was evaluated using cells from an osteoblastic MC 3T3-E1 cell line, and sodium hypochlorite was used as model toxic substance. Comparing the OWLS signal to the morphological response measured by CLSM reveals that OWLS is effective in monitoring not only cell attachment and spreading but also the cellular response to toxic compounds (i.e. by means of change in cell morphology). For the model toxin, the OWLS measurements indicate that, at concentrations above 0.01%, the cells exhibit a clearly discernable morphological effect (i.e. a decrease in average cell contact area). Thus, the potential of an on-line sensor based on OWLS to applications in toxicology, pharmacy and biocompatibility was demonstrated.     

High-resolution micromechanical measurement in real time of forces exerted by living cells

The aim of this study was to compare uniaxial traction forces exerted by different cell types using a novel sensor design and to test the dependence of measured forces on cytoskeletal integrity. The sensor design detects forces generated between 2 contact points by cells spanning a gap. The magnitude of these forces varied according to cell type and were dependent on cytoskeletal integrity. The response time for drug-induced cytoskeletal disruption also varied between cell types: dermal fibroblasts exerted the greatest forces and had the slowest drug response times; EBV-transformed epithelial cells also had slow cytoskeletal depolymerisation times but exerted the lowest forces overall. Conversely, lung epithelial tumor cells exerted low forces but had the fastest depolymerisation drug response. These results provide proof of principle for a new design of force-measurement sensor based on optical interferometry, an approach that can be used to study cytoskeletal dynamics in real time.     

Modular microsystem for epithelial cell culture and electrical characterisation

We have realised a microsystem for the culture and electrical characterisation of epithelial cell layers for cell-based diagnostic applications. The main goal of this work is to achieve both cell culture and impedimetric and potentiometric characterisation on a single device. The miniaturised cell culture system enables the uses of scarce epithelial cells, as obtained from transgenic mice or from human biopsies. The device is completely modular and offers high flexibility: a polycarbonate membrane used as cell substrate is glued in between two moulded Polydimethylsiloxane (PDMS) layers to form a sandwich, which is placed between two stacks, containing the microfluidic channels and integrated measurement electrodes. The polycarbonate membrane sandwich can be removed, replaced or analysed at any time. We have characterised the impedimetric properties of our microsystem, demonstrated epithelial cell layer growth within it, and have done the initial electrical characterisation of epithelial cell layers.     

A living cell-based biosensor utilizing G-protein coupled receptors: principles and detection methods

This study explores the feasibility of using a bullfrog fibroblast cell line (FT cells) expressing G protein coupled receptors (GPCRs) as the basis for a living cell-based biosensor. We have fabricated gold microelectrode arrays on a silicon dioxide substrate that supports long term, robust growth of the cells at room temperature and under ambient atmospheric conditions. Activation of an endogenous GPCR to ATP was monitored with an optical method that detects rises in intracellular calcium and with an electrochemical method that monitors the increased secretion of pre-loaded norepinephrine on a MEMS device. FT cells were also transfected to express reporter genes driven by several different promoters, raising the possibility that they could be modified genetically to express novel GPCRs as well. The ability to harness GPCRs for BioMEMS applications by using cells that are easy to grow on MEMS devices and to modify genetically opens the way for a new generation of devices based on these naturally selective and highly sensitive chemoreceptors.     

Application of on-chip cell cultures for the detection of allergic response

In this report, the development of a microfluidic cell chip for monitoring allergic response is described. A rat basophilic leukemia cell line (RBL-2H3), a tumor analog of rat mucosal mast cells, has been used as a model to observe its allergic response upon antigen stimulus. The cells were cultivated on a poly(dimethylsiloxane) (PDMS) chip, the surface of which was modified by several methods. The PDMS chip, which comprised a cell cultivation chamber and microfluidic channels, was fabricated by conventional molding methods. In order to detect the allergic response, a fluorescent dye, quinacrine, was introduced inside the cell compartment that included histamine. The cells were stimulated with dinitrophenylated bovine serum albumin (DNP-BSA) after incubation with anti-DNP IgE. When exocytosis events occurred, the microfluidic system detected the fluorescent signal of quinacrine, which was released from RBL-2H3 cells by using a photomultiplier tube (PMT) fitted onto a microscope.     

A study of electrochemical biosensor for analysis of three-dimensional (3D) cell culture

The miniaturization of electrochemical sensors allows for the minimally invasive and cost effective examination of cellular responses at a high efficacy rate. In this work, an ink-jet printed superoxide dismutase electrode was designed, characterized, and utilized as a novel microfluidic device to examine the metabolic response of a 2D layer of macrophage cells. Since superoxide production is one of the first indicators of oxidative burst, macrophage cells were exposed within the microfluidic device to phorbol myristate acetate (PMA), a known promoter of oxidative burst, and the production of superoxide was measured. A 46 ± 19% increase in current was measured over a 30 min time period demonstrating successful detection of sustained macrophage oxidative burst, which corresponds to an increase in the superoxide production rate by 9 ± 3 attomoles/cell/s. Linear sweep voltammetry was utilized to show the selectivity of this sensor for superoxide over hydrogen peroxide. This novel controllable microfluidic system can be used to study the impact of multiple effectors from a large number of bacteria or other invaders along a 2D layer of macrophages, providing an in vitro platform for improved electrochemical studies of metabolic responses.     

Endogenous BiP reporter system for simultaneous identification of ER stress and antibody production in Chinese hamster ovary cells

As the biopharmaceutical industry expands, improving the production of therapeutic proteins using Chinese hamster ovary (CHO) cells is important. However, excessive and complicated protein production causes protein misfolding and triggers endoplasmic reticulum (ER) stress. When ER stress occurs, cells mediate the unfolded protein response (UPR) pathway to restore protein homeostasis and folding capacity of the ER. However, when the cells fail to control prolonged ER stress, UPR induces apoptosis. Therefore, monitoring the degree of UPR is required to achieve high productivity and the desired quality. In this study, we developed a fluorescence-based UPR monitoring system for CHO cells. We integrated mGFP into endogenous HSPA5 encoding BiP, a major ER chaperone and the primary ER stress activation sensor, using CRISPR/Cas9-mediated targeted integration. The mGFP expression level changed according to the ER stress induced by chemical treatment and batch culture in the engineered cell line. Using this monitoring system, we demonstrated that host cells and recombinant CHO cell lines with different mean fluorescence intensities (MFI; basal expression levels of BiP) possess a distinct capacity for stress culture conditions induced by recombinant protein production. Antibody-producing recombinant CHO cell lines were generated using site-specific integration based on host cells equipped with the BiP reporter system. Targeted integrants showed a strong correlation between productivity and MFI, reflecting the potential of this monitoring system as a screening readout for high producers. Taken together, these data demonstrate the utility of the endogenous BiP reporter system for the detection of real-time dynamic changes in endogenous UPR and its potential for applications in recombinant protein production during CHO cell line development.     

Integration of microfluidics with a four-channel integrated optical Young interferometer immunosensor

This report describes an optical sensing hybrid system obtained by bonding a microfluidic system to an integrated optical (IO) four-channel Young interferometer (YI) chip. The microfluidic system implemented into a glass plate consists of four microchannels with cross-sectional dimensions of 200 microm x 15 microm. The microfluidic system is structured in such a way that after bonding to the IO chip, each microchannel addresses one sensing window in the four-channel YI sensor. Experimental tests show that the implementation of the microfluidics reduces the response time of the sensor from 100s, as achieved with a bulky cuvette, to 4s. Monitoring the anti-human serum albumine/human serum albumine (alpha-HSA/HSA) immunoreaction demonstrates the feasibility to use the microfluidic sensing system for immunosensing applications. In this case, a better discrimination between the bulk refractive index change and the layer formation can be made, resulting into higher accuracy and offering the prospect of being able to use the kinetics of the immunoreaction. The microfluidic sensing system shows an average phase resolution of 7 x 10(-5) x 2pi for different pairs of channels, which at the given interaction length of 4 mm corresponds to a refractive index resolution of 6 x 10(-8), being equivalent to a protein mass coverage resolution of 20 fg/mm2.     

Live reporting for hypoxia: Hypoxia sensor–modified mesenchymal stem cells as in vitro reporters

Natural oxygen gradients occur in tissues of biological organisms and also in the context of three-dimensional (3D) in vitro cultivation. Oxygen diffusion limitation and metabolic oxygen consumption by embedded cells produce areas of hypoxia in the tissue/matrix. However, reliable systems to detect oxygen gradients and cellular response to hypoxia in 3D cell culture systems are still missing. In this study, we developed a system for visualization of oxygen gradients in 3D using human adipose tissue–derived mesenchymal stem cells (hAD-MSCs) modified to stably express a fluorescent genetically engineered hypoxia sensor HRE-dUnaG. Modified cells retained their stem cell characteristics in terms of proliferation and differentiation capacity. The hypoxia-reporter cells were evaluated by fluorescence microscopy and flow cytometry under variable oxygen levels (2.5%, 5%, and 7.5% O₂). We demonstrated that reporter hAD-MSCs output is sensitive to different oxygen levels and displays fast decay kinetics after reoxygenation. Additionally, the reporter cells were encapsulated in bulk hydrogels with a variable cell number, to investigate the sensor response in model 3D cell culture applications. The use of hypoxia-reporting cells based on MSCs represents a valuable tool for approaching the genuine in vivo cellular microenvironment and will allow a better understanding of the regenerative potential of AD-MSCs.     

Nanoliter scale microbioreactor array for quantitative cell biology

A nanoliter scale microbioreactor array was designed for multiplexed quantitative cell biology. An addressable 8 x 8 array of three nanoliter chambers was demonstrated for observing the serum response of HeLa human cancer cells in 64 parallel cultures. The individual culture unit was designed with a "C" shaped ring that effectively decoupled the central cell growth regions from the outer fluid transport channels. The chamber layout mimics physiological tissue conditions by implementing an outer channel for convective "blood" flow that feeds cells through diffusion into the low shear "interstitial" space. The 2 microm opening at the base of the "C" ring established a differential fluidic resistance up to 3 orders of magnitude greater than the fluid transport channel within a single mold microfluidic device. Three-dimensional (3D) finite element simulation were used to predict fluid transport properties based on chamber dimensions and verified experimentally. The microbioreactor array provided a continuous flow culture environment with a Peclet number (0.02) and shear stress (0.01 Pa) that approximated in vivo tissue conditions without limiting mass transport (10 s nutrient turnover). This microfluidic design overcomes the major problems encountered in multiplexing nanoliter culture environments by enabling uniform cell loading, eliminating shear, and pressure stresses on cultured cells, providing stable control of fluidic addressing, and permitting continuous on-chip optical monitoring.     

Label-Free Recognition of Drug Resistance via Impedimetric Screening of Breast Cancer Cells

We present a novel study on label-free recognition and distinction of drug resistant breast cancer cells (MCF-7 DOX) from their parental cells (MCF-7 WT) via impedimetric measurements. Drug resistant cells exhibited significant differences in their dielectric properties compared to wild-type cells, exerting much higher extracellular resistance (R_extra). Immunostaining revealed that MCF-7 DOX cells gained a much denser F-actin network upon acquiring drug resistance indicating that remodeling of actin cytoskeleton is probably the reason behind higher R_extra, providing stronger cell architecture. Moreover, having exposed both cell types to doxorubicin, we were able to distinguish these two phenotypes based on their substantially different drug response. Interestingly, impedimetric measurements identified a concentration-dependent and reversible increase in cell stiffness in the presence of low non-lethal drug doses. Combined with a profound frequency analysis, these findings enabled distinguishing distinct cellular responses during drug exposure within four concentration ranges without using any labeling. Overall, this study highlights the possibility to differentiate drug resistant phenotypes from their parental cells and to assess their drug response by using microelectrodes, offering direct, real-time and noninvasive measurements of cell dependent parameters under drug exposure, hence providing a promising step for personalized medicine applications such as evaluation of the disease progress and optimization of the drug treatment of a patient during chemotherapy.     

Development of a stable dual cell-line GFP expression system to study estrogenic endocrine disruptors

Environmental estrogenic endocrine disruptors are a health concern. Here we constructed a dual cell-line green fluorescence protein (GFP) expression system to identify and study endocrine disrupting compounds with activities of estrogen receptor agonists or antagonists. Human breast cancer MCF-7 cells and endometrial carcinoma Ishikawa cells were infected with a two tandem estrogen response elements--E4 promoter-GFP reporter gene construct. The use of GFP reporter enabled direct and simple evaluations of cell responses. GFP intensity in stably transfected MCF7-GFP and Ishikawa-GFP cells was dose-responsive to 17-beta-estradiol, diethylstilbestrol, 2-hydroxyestradiol, and environmental toxins bisphenol A, genistein and o-p'-DDT. Raloxifene and tamoxifen were effective antiestrogens in MCF7-GFP cells, but acted as partial estrogen receptor agonists in Ishikawa-GFP cells at concentrations of 0.1 nM and above. No synergistic effect was observed in chemical combinations between organochlorine pesticides methoxychlor, o-p'-DDT, p-p'-DDT, nor between estradiol and estrone. In summary, for the first time the effects of estrogen receptor agonists or antagonists were compared between mammary and endometrial cancer cells both stably expressing identical plasmids with GFP reporter genes under the control of tandem estrogen response elements. This dual cell-line system provides a rapid method and sensitive assay to identify environmental estrogens, antiestrogens, selective estrogen receptor modulators and to study their tissue specific effects and chemical interactions. Such a system is especially useful for direct and parallel toxicity assessments with a microfluidic cell culture device.     

Non-Invasive Imaging of Phosphoinositide-3-Kinase-Catalytic-Subunit-Alpha (PIK3CA) Promoter Modulation in Small Animal Models

Activation of the PI3K/Akt pathway, a critical step for survival in cancer cells is often associated with decreased sensitivity to several chemotherapeutic drugs. PIK3CA gene amplification is observed in 16–24% of epithelial ovarian cancer (EOC) patients in conjunction with p53 mutations. A 900 bp long PIK3CA promoter is shown to be negatively regulated by p53 in ovarian surface epithelial cells but the consequence of chemotherapeutic drug treatments on this promoter in ovarian cancer cells is largely unknown. We aim to study the modulation of this promoter by cisplatin using an improved fusion reporter in ovarian cancer cells and tumor xenografts by non-invasive imaging approach. A PIK3CA sensor was developed using a bi-fusion reporter from a newly constructed library of bi- and tri-fusion vectors comprising of two mutant far red fluorescent proteins (mcherry/mch and tdTomato/tdt), a mutant firefly luciferase (fluc2), and a PET reporter protein (ttk). In vivo imaging of mice implanted with 293T cells transiently expressing these bi- and tri-fusion reporters along with respective controls revealed comparable activity of each reporter in the fusion background and fluc2-tdt as the most sensitive one. Repression of the PIK3CA sensor by drugs was inversely proportional to cellular p53 level in a germline (PA1) and in an EOC (A2780) cell line but not in a p53 deficient EOC (SKOV3) cell line. Bioluminescence imaging of tumor xenografts stably expressing the PIK3CA sensor in PA1 and A2780 cells exhibited attenuating activity without any change in SKOV3 tumors expressing the PIK3CA sensor after cisplatin treatment. Sequential mutation at p53 binding sites showed gradual increase in promoter activity and decreased effects of the drugs. These newly developed PIK3CA-fluc2-tdt and the mutant reporter sensors thus would be extremely useful for screening new drugs and for functional assessment of PIK3CA expression from intact cells to living subjects.     

Microfluidic formation of single cell array for parallel analysis of Ca release-activated Ca (CRAC) channel activation and inhibition

High-throughput single cell analysis is required for understanding and predicting the complex stochastic responses of individual cells in changing environments. We have designed a microfluidic device consisting of parallel, independent channels with cell-docking structures for the formation of an array of individual cells. The microfluidic cell array was used to quantify single cell responses and the distribution of response patterns of calcium channels among a population of individual cells. In this device, 15 cell-docking units in each channel were fabricated with each unit containing 5 sandbag structures, such that an array of individual cells was formed in 8 independent channels. Single cell responses to different treatments in different channels were monitored in parallel to study the effects of the specific activator and inhibitor of the Ca²⁺ release-activated Ca²⁺ (CRAC) channels. Multichannel detection was performed to obtain the response patterns of the population of cells within this single cell array. The results demonstrate that it is possible to acquire single cell features in multichannels simultaneously with passive structural control, which provides an opportunity for high-throughput single cell response analysis in a microfluidic chip.     

Volumetric stress-strain analysis of optohydrodynamically suspended biological cells

Ongoing investigations are exploring the biomechanical properties of isolated and suspended biological cells in pursuit of understanding single-cell mechanobiology. An optical tweezer with minimal applied laser power has positioned biologic cells at the geometric center of a microfluidic cross-junction, creating a novel optohydrodynamic trap. The resulting fluid flow environment facilitates unique multiaxial loading of single cells with site-specific normal and shear stresses resulting in a physical albeit extensional state. A recent two-dimensional analysis has explored the cytoskeletal strain response due to these fluid-induced stresses [Wilson and Kohles, 2010, "Two-Dimensional Modeling of Nanomechanical Stresses-Strains in Healthy and Diseased Single-Cells During Microfluidic Manipulation," J Nanotechnol Eng Med, 1(2), p. 021005]. Results described a microfluidic environment having controlled nanometer and piconewton resolution. In this present study, computational fluid dynamics combined with multiphysics modeling has further characterized the applied fluid stress environment and the solid cellular strain response in three dimensions to accompany experimental cell stimulation. A volumetric stress-strain analysis was applied to representative living cell biomechanical data. The presented normal and shear stress surface maps will guide future microfluidic experiments as well as provide a framework for characterizing cytoskeletal structure influencing the stress to strain response.     

A recombinant CHSE-214 cell line expressing an Mx1 promoter-reporter system responds to both interferon type I and type II from salmonids and represents a versatile tool to study the IFN-system in teleost fish

A transgenic cell line for the detection of salmon interferons (IFNs) has been established. It is based on a CHSE-214 cell line containing a reporter construct expressing firefly luciferase under the control of the rainbow trout promoter for the IFN-induced Mx1 gene. This cell line, named CHSE-Mx10, showed IFN-induced luciferase expression after more than 80 passages, confirming the stability of this cell line. Interestingly, the Mx promoter was shown to respond to both salmon IFN-alpha/beta and trout IFN-gamma in a dose-dependent manner, while there was no response to TNF-alpha and IL-1beta. IFN-alpha/beta activity could be measured at a range of 9-150 U/ml, and IFN-gamma showed activity between 10 and 100 ng/ml. The reproducibility of both responses was good. The CHSE-Mx10 reporter system constitutes a versatile tool to study the induction and regulation of IFN signaling in teleost fish. A preliminary study presented herein suggests that both infectious pancreas necrosis virus (IPNV) and salmon pancreas disease virus (SPDV) may block activation of the Mx promoter in CHSE-Mx10 stimulated with IFN-alpha/beta.