Determinations of fluoroquinolones and nonsteroidal anti-inflammatory drugs in urine by extractive spectrophotometry and photoinduced spectrofluorimetry using multivariate calibration

Multivariate calibration methods are chemometric tools that may be applied to the analysis of spectroscopic data with multichannel detection. Two procedures, based on spectrophotometric and fluorimetric signals, are reported for the simultaneous determination of two fluoroquinolones (ciprofloxacin and ofloxacin) and two nonsteroidal anti-inflammatory drugs (diclofenac and mefenamic acid) using first- and second-order multivariate calibration methods. In the spectrophotometric method, an extractive procedure into chloroform using trioctylmethylammonium chloride-adogen as counter ion was optimized, with the object of extracting the analytes from urine samples and eliminating matrix interferences. After separation, the absorption spectrum of the organic phase was used as the analytical signal in a partial least squares method. A photoinduced spectrofluorimetric (PIF) method using excitation-emission fluorescence matrices, is proposed, to apply three-way chemometric calibration, with the aim of analyzing ofloxacin, ciprofloxacin, and diclofenac in urine samples without the previous extractive sample-cleaning step. For both procedures, recoveries around 100% were found for all the analytes. However, the PIF three-way chemometric method provides the most sensitive and selective procedure as the urine interferences are modulated using the three-way chemometric technique.     

Rapid analysis of furosemide in human urine by capillary electrophoresis with laser-induced fluorescence and electrospray ionization-ion trap mass spectrometric detection

Furosemide, a drug that promotes urine excretion, is used in the pharmacotherapy of various diseases and is considered as a doping agent in sports. Using alkaline electrolytes, analysis of furosemide by dodecyl sulfate based micellar electrokinetic capillary chromatography (MECC) and capillary zone electrophoresis (CZE) with laser-induced fluorescence detection (LIF, analyte excitation with the 325 nm line of a HeCd laser) is described. Data produced by injection of plain or diluted patient urines are confirmed with those obtained via analysis of urinary solid-phase extracts. CZE-LIF and MECC-LIF are thereby shown to permit unambiguous recognition of furosemide in urines collected after ingestion of therapeutic doses of this drug. This is in contrast to solute detection via UV absorbance for which the extraction of furosemide is required. MECC based electropherograms are somewhat more complex compared to those obtained by CZE-LIF, this suggesting that the latter approach is more suitable for rapid screening of urines with direct sample injection and LIF detection. Alternatively, capillary electrophoresis with negative electrospray ionization-ion-trap tandem mass spectrometry (CE-MS2) is shown to permit the direct confirmation of furosemide in human urine. This approach is based upon the monitoring of the m/z 329.3-->4m/z 285.2 precursor-product ion transition. CZE-LIF and CE-MS2 with injection of plain or diluted urine represent simple, rapid and attractive urinary screening and confirmation assays for furosemide in patient urines.     

Determination of triamterene and its main metabolite hydroxytriamterene sulfate in human urine by capillary electrophoresis using ultraviolet absorbance and laser-induced fluorescence detection

Two capillary electrophoresis methods have been developed for the direct determination of triamterene and its main metabolite hydroxytriamterene sulfate in human urine. Analytes were detected using conventional UV detection as well as laser-induced fluorescence (LIF) detection with an HeCd-laser operating at a wavelength of 325 nm. The results of both detection techniques were compared. Indeed, the limit of quantification was eightfold lower using LIF detection (50 ng/ml) in comparison to UV detection (400 ng/ml). As no interference due to endogenous urine compounds was observed, direct urine analysis was feasible. Analysis was very simple and fast-one run could be performed within less than 10 min (CE-UV method) and 2.5 min (CE-LIF method), respectively. Both assays were fully validated and applied to urine samples from a human volunteer. The results of the application of the CE-LIF method to human urine samples are presented in this publication.     

Chemiluminescence detection with separation techniques for bioanalytical applications

Chemiluminescence detection is known to be a sensitive, selective, and versatile method that can be used in combination with separation techniques such as high-performance liquid chromatography, capillary electrophoresis, and chip electrophoresis. This article reviews the bioanalytical applications of a combination of chemiluminescence detection and separation techniques published in the literature between 1999 and 2008. Luminol chemiluminescene, peroxyoxalate chemiluminescence, and electrochemiluminescence have been mainly used for bioanalytical application. In this paper, only the applications of the method for the analysis of biosamples, serum, plasma, urine, and tissue samples are discussed.     

Differential expression analysis of Escherichia coli proteins using a novel software for relative quantitation of LC-MS/MS data

The study of changes in protein levels between samples derived from cells representing different biological conditions is a key to the understanding of cellular function. There are two main methods available that allow both for global scanning for significantly varying proteins and targeted profiling of proteins of interest. One method is based on 2-D gel electrophoresis and image analysis of labelled proteins. The other method is based on LC-MS/MS analysis of either unlabelled peptides or peptides derived from isotopically labelled proteins or peptides. In this study, the non-labelling approach was used involving a new software, DeCyder MS Differential Analysis Software (DeCyder MS) intended for automated detection and relative quantitation of unlabelled peptides in LC-MS/MS data.Total protein extracts of E. coli strains expressing varying levels of dihydrofolate reductase and integron integrase were digested with trypsin and analyzed using a nanoscale liquid chromatography system, Ettan MDLC, online connected to an LTQTM linear ion-trap mass spectrometer fitted with a nanospray interface. Acquired MS data were subjected to DeCyder MS analysis where 2-D representations of the peptide patterns from individual LC-MS/MS analyses were matched and compared.This approach to unlabelled quantitative analysis of the E. coli proteome resulted in relative protein abundances that were in good agreement with results obtained from traditional methods for measuring protein levels.     

Metabonomic study on the biochemical profiles of a hydrocortisone-induced animal model

This work describes the metabonomic study of a biochemical modification in vivo induced by high dose of hydrocortisone, which led to a unique pathologic condition similar to the 'kidney deficiency syndromes', an early stage of obesity and diabetes in traditional Chinese medicine. The methodology of the metabonomic approach consisted of GC/MS and multivariate statistical technique for the establishment of urine metabolic patterns of the treatment rats. In the study, 24-h urine was collected pre-dose and at days 1, 3, 7, and 10 post-dose after rats were injected with hydrocortisone at 1.5 mg/100 g. The acquired data were transferred into Matlab to be processed using principal components analysis (PCA). The results indicated that clear and consistent biochemical changes following hydrocortisone intervention under controlled conditions could be identified using chemometric analysis. The work suggests that this metabonomic approach could be used as a potentially powerful tool to investigate the biochemical changes of certain physiopathologic conditions such as metabolic syndrome, as an early diagnostic means.     

Electrochemiluminescence detection with integrated indium tin oxide electrode on electrophoretic microchip for direct bioanalysis of lincomycin in the urine

In this article, an antibiotic, lincomycin was determined in the urine sample by microchip capillary electrophoresis (CE) with integrated indium tin oxide (ITO) working electrode based on electrochemiluminescence (ECL) detection. This microchip CE-ECL system can be used for the rapid analysis of lincomycin within 40s. Under the optimized conditions, the linear range was obtained from 5 to 100 microM with correlation coefficient of 0.998. The limit of detection (LOD) of 3.1 microM was obtained for lincomycin in the standard solution. We also applied this method to analyzing lincomycin in the urine matrix. The limit of detection of 9.0 microM was obtained. This method can determine lincomycin in the urine sample without pretreatment, which demonstrated that it is a promising method of detection of lincomycin in clinical and pharmaceutical area.     

A study on the influence of molecular properties in the psychoactivity of cannabinoid compounds

Several molecular properties are calculated for a set of 26 cannabinoid compounds with the goal of connecting the psychoactivity of the compounds with an appropriate set of calculated properties. For this purpose we used quantum chemical (the AM1 semi-empirical method) and chemometric methods. The AM1 method was employed to calculate the set of quantum chemical molecular properties and the chemometric methods were employed with the aim of selecting the most relevant properties to be correlated with psychoactivity. The chemometric methods used were Principal Component Analysis (PCA), Hierarchical Cluster Analysis (HCA) and the K-Nearest Neighbor (KNN) method. The chemometric analysis showed that an electronic property (energy of LUMO), a hydrophobic property (log P), a steric property (volume of the substituent at the C4 position) and a topological property (Lovasz–Pelikan index) were the most important variables for the separation between the psychoactive and psychoinactive compounds. In order to validate our PCA, HCA and KNN results, eight new cannabinoid compounds (with known psychoactivity) were used in a prediction study and were classified correctly by the methods used in this work, indicating that our PCA, HCA and KNN models are able to predict reliable psychoactivity of cannabinoid compounds. Figure: ⁹-THC This revised version was published online in June 2005 with corrections to Table 1.     

SYBR Green I staining of pulsed field agarose gels is a sensitive and inexpensive way of quantitating DNA double-strand breaks in mammalian cells.

Pulsed field gel electrophoresis (PFGE) is widely used to measure DNA double strand breaks (dsb). The DNA of cultured cells can be prelabelled with radioactivity, which helps greatly in detection and quantitation of DNA dsb. However, this approach cannot be used with non-cycling cells from biopsy material. We describe a method which uses SYBR Green I to stain DNA in dried agarose gels. DNA is detected and analysed using readily available camera equipment and image analysis software. This method is as sensitive as [3H]thymidine prelabelling of cells and allows DNA dsb to be measured simply and economically in non-cycling cells.     

Large-volume sample stacking of selected drugs of forensic significance by capillary electrophoresis

Large-volume sample stacking capillary electrophoresis (LVSS-CE) and conventional capillary electrophoresis (CE) are compared for the separation of drugs of significance to forensic and clinical analyses. LVSS-CE for cations requires the use of an electroosmotic flow (EOF) modifier in conjunction with polarity switching to effect on-column concentration of an analyte and its subsequent migration in the capillary. The run buffer consists of 0.05 mol dm⁻³ disodium tetraborate adjusted to pH 2.2 with orthophosphoric acid, and the EOF modifier is 0.002 mol dm⁻³ cetyltrimethylammonium bromide. CE investigations used an identical run buffer minus the EOF modifier. LVSS-CE and CE investigations used injection times of 30 s and 3 s, respectively. Both modes of capillary electrophoresis are compared in terms of their limits of detection, efficiency, resolution and reproducibility. LVSS-CE is also applied to the analysis of a spiked urine sample.     

Characterization of the human urine proteome by preparative electrophoresis in combination with 2-DE

The protein components of urine are useful indicators of renal function and human health in general. Urine samples are easily attainable making them ideal substrates for biomarker research. Analysis of the urine proteome however, has been hindered by the great variability of the urine specimens, and the presence of various proteins in low abundance or modified forms. To alleviate some of these problems urine samples from five different individuals were pooled, concentrated and the proteome characterized by a combination of preparative electrophoresis and 2-DE, followed by PMF. A total of 778 protein spots corresponding to 141 different gene products were identified. In comparison, 171 spots corresponding to 44 unique proteins were identified in the unfractionated starting material. Among the proteins identified from the preparative electrophoresis were many of low abundance such as proteins involved in signal transduction. Furthermore, the median molecular mass of the identified proteins from the preparative electrophoresis was significantly lower in comparison to the proteins identified from the unfractionated starting material (39 886 Da versus 71 317 Da, respectively). Concluding, application of this methodology provides a coherent analysis of the urine proteome and contributes to the generation of the urine protein map in health and disease.     

Determination of nicotine and its metabolites in urine by solid-phase extraction and sample stacking capillary electrophoresis-mass spectrometry

The combination of capillary electrophoresis (CE) and mass spectrometry (MS) with solid-phase extraction (SPE) has been used for the identification of nicotine and eight of its metabolites in urine. The recovery of cotinine from cotinine-spiked urine, by C18 SPE, was found to be 98%. Smokers urine (200 ml) was preconcentrated 200-fold via SPE prior to analysis. The sample stacking mode of CE, when compared to capillary zone electrophoresis, was shown to improve peak efficiency by 132-fold. The combination of hydrodynamic and electrokinetic injection was studied with sample stacking/CE/MS. The on-column limits of detection (LOD) of nicotine and cotinine, by this technique, were found to be 0.11 and 2.25 microg/ml, respectively. Hence, LODs of nicotine and cotinine in urine after 200-fold preconcentration were 0.55 and 11.25 ng/ml, respectively.     

Global urinary metabolic profiling procedures using gas chromatography-mass spectrometry

The role of urinary metabolic profiling in systems biology research is expanding. This is because of the use of this technology for clinical diagnostic and mechanistic studies and for the development of new personalized health care and molecular epidemiology (population) studies. The methodologies commonly used for metabolic profiling are NMR spectroscopy, liquid chromatography mass spectrometry (LC/MS) and gas chromatography-mass spectrometry (GC/MS). In this protocol, we describe urine collection and storage, GC/MS and data preprocessing methods, chemometric data analysis and urinary marker metabolite identification. Results obtained using GC/MS are complementary to NMR and LC/MS. Sample preparation for GC/MS analysis involves the depletion of urea via treatment with urease, protein precipitation with methanol, and trimethylsilyl derivatization. The protocol described here facilitates the metabolic profiling of ～400-600 metabolites in 120 urine samples per week.     

Screening Panels for Monoclonal Gammopathies: Time to Change

The introduction of quantitative assays for serum free light chains (FLC) has changed the approach to screening for monoclonal gammopathies. Recent guidelines from the International Myeloma Working Group have recommended the use of serum protein electrophoresis (SPEP), immunofixation electrophoresis (IFE) and FLC as the screening panel unless primary amyloidosis (AL) is suspected. If screening for AL, then urine IFE should also be performed. We discuss the background for these recommendations as well as data showing that SPEP and FLC alone may provide a simplified screening panel for detecting multiple myeloma (MM) and Waldenström’s macroglobulinaemia (WM) with little loss of diagnostic sensitivity. If AL is suspected, we support the recommendation to include serum and urine IFE. The selective use of serum and urine IFE requires that clinical judgment be integral to ordering screening panels for detection of monoclonal gammopathies.     

Direct determination of diuretic drugs in urine by capillary zone electrophoresis using fluorescence detection

Four diuretic drugs banned in sport (amiloride, triamterene, bendroflumethiazide and bumetanide) have been separated by capillary zone electrophoresis (CZE) and detected using conventional fluorescence spectrometry. The effect of pH on electrophoretic parameters such as migration time, peak efficiency and peak height is discussed. Complete separation of the four drugs is achieved in less than 8 min at pH 8. No interference due to endogenous urine components is observed and thus direct urine analysis is feasible. Analytical figures of merit including precision and limits of detection are presented. Limits of detection range between 0.5 fmol for triamterene and 21.6 fmol for bumetanide.     

Determination of dopamine and methoxycatecholamines in patient urine by liquid chromatography with electrochemical detection and by capillary electrophoresis coupled with spectrophotometry and mass spectrometry

The applicability of capillary electrophoresis (CE) with UV and mass spectrometric (MS) detection for the determination of dopamine and methoxycatecholamines in urine was evaluated in comparison with the liquid chromatography-electrochemical detection (LC-EC) method widely used in catecholamine analysis. The catecholamines in urine were deconjugated with acid or enzyme hydrolysis, purified by cation exchange (CEX) or solid-phase extraction (SPE) with a copolymer of N-divinylpyrrolidone and divinylbenzene and analyzed by LC-EC, CE-UV, and CE-MS. Acid hydrolysis was more effective in the deconjugation than enzymatic hydrolysis with Helix pomatia. However, the recoveries of HMBA, DA and NMN from spiked samples were less than 30% after acid hydrolysis and SPE purification. The CEX purification was more efficient than SPE in removing matrix compounds from the urine samples. The limits of detection were lower in LC-EC analysis than in CE-UV or CE-MS. Many factors in the analytical procedure caused deviations in the concentrations measured for urinary dopamine and methoxycatecholamines. The recovery of HMBA, which was used as the internal standard, was poor after acid hydrolysis and SPE purification. The purification methods were validated in conjunction with the analytical methods and therefore cross analysis was unsuccessful. The LC-EC method was the most sensitive, but CE-UV and CE-MS were sensitive enough for the determination of dopamine and methoxycatecholamines even in healthy patient urine. The EC and MS detections were superior to the UV detection in specificity since, after acid hydrolysis, some matrix compounds were migrating close to I.S., DA and 3MT.     

Development and validation of a chemical hydrolysis method for dextromethorphan and dextrophan determination in urine samples: application to the assessment of CYP2D6 activity in fibromyalgia patients

Dextromethorphan (DEM) is a widely used probe drug for human cytochrome P450 2D6 isozyme activity assessment by measuring the ratio between DEM and its N-demethylated metabolite dextrorphan (DOR). DOR is excreted in urine mainly conjugated to glucuronic acid. Prior to quantification, DOR must be deconjugated to avoid variability caused by the polymorphic glucuronosyltransferase enzyme. A chemical hydrolysis method was optimized using a chemometric approach. Three factors (acid concentration, hydrolysis time and temperature) were selected and simultaneously varied to study their effect on conjugated DOR hydrolysis. Hydrolysis conditions that maximize DOR release without significant degradation of both DEM and DOR were chosen and results were compared to those obtained by enzymatic method using beta-glucuronidase. An HPLC method with fluorescence detection was developed for the simultaneous quantitation of DEM, DOR and levallorphan, used as an internal standard. Separation was performed on a phenyl analytical column (150 mmx4.6 mm i.d., 5 microm) with a mobile phase consisting of 18% acetonitrile and 50 mM phosphoric acid (pH 3). The overall analytical procedure was validated and showed good performances in terms of selectivity, linearity, sensitivity, precision and accuracy. Finally, this assay was used to determine DEM/DOR molar ratios in fibromyalgia patients for the purpose of determining phenotype status for the CYP2D6.     

Determination of urine catecholamines by capillary electrophoresis with dual-electrode amperometric detection

Demonstrated in this study is that without pretreatment and preconcentration nanomolar-level catecholamines in human urine samples can be quantitatively determined with ease by utilizing capillary electrophoresis coupled with amperometric detection. The detector employs a parallel-opposed dual-electrode scheme assembled with an on-capillary electrode and a disk electrode and takes advantage of the redox cycling of analytes between the two working electrodes to improve the limit of detection. The matrix effect of urine samples significantly decreases the detection sensitivity from that obtained in standard solutions. Therefore, calibration curves derived from standard solutions cannot be used in quantitative determination of catecholamines. Methods of standard addition and internal standard have been studied. The results suggest that isoproterenol is a good internal standard to facilitate the measurements of dopamine, epinephrine, and norepinephrine in human urine samples.     

Electrophoresis gel image processing and analysis using the KODAK 1D software.

The present article reports on the performance of the KODAK 1D Image Analysis Software for the acquisition of information from electrophoresis experiments and highlights the utility of several mathematical functions for subsequent image processing, analysis, and presentation. Digital images of Coomassie-stained polyacrylamide protein gels containing molecular weight standards and ethidium bromide stained agarose gels containing DNA mass standards are acquired using the KODAK Electrophoresis Documentation and Analysis System 290 (EDAS 290). The KODAK 1D software is used to optimize lane and band identification using features such as isomolecular weight lines. Mathematical functions for mass standard representation are presented, and two methods for estimation of unknown band mass are compared. Given the progressive transition of electrophoresis data acquisition and daily reporting in peer-reviewed journals to digital formats ranging from 8-bit systems such as EDAS 290 to more expensive 16-bit systems, the utility of algorithms such as Gaussian modeling, which can correct geometric aberrations such as clipping due to signal saturation common at lower bit depth levels, is discussed. Finally, image-processing tools that can facilitate image preparation for presentation are demonstrated.     

Development of a method for determination of the malondialdehyde-deoxyguanosine adduct in urine using liquid chromatography-tandem mass spectrometry

A procedure is described for the quantification of the major malondialdehyde deoxyguanosine adduct, pyrimido[1,2-alpha]purin-10(3H)-one-deoxyribose (M(1)GdR) in urine. M(1)GdR is isolated from urine by a combination of C(18) solid-phase extraction and immunoaffinity chromatography. Sodium borohydride treatment reduces M(1)GdR to the 5,6-dihydro derivative, which is quantified by liquid chromatography-mass spectrometry. Authentic [7,9-15N,8-13C]M(1)GdR is added to urine as an internal standard. A detection limit of 50 fmol M(1)GdR/ml urine is achieved starting with 5 ml of urine. Analysis of urine samples from control rats or rats treated with CCl(4) indicates that the levels of M(1)GdR are below the detection limit of the assay. This method is easily adaptable to the analysis of M(1)GdR in DNA samples or biological fluids.