Quantitative analysis of DNA aberrations amplified by competitive polymerase chain reaction using capillary electrophoresis

We compared the use of capillary electrophoresis (CE) in a polymer network with the use of slab gel electrophoresis for the quantitative analysis of polymerase chain reaction (PCR)-amplified DNA samples. We quantified residual lymphoma cells carrying a translocation between chromosomes 14 and 18, in consecutive patient peripheral blood samples that were amplified by competitive PCR. For CE analysis we used a 4% linear polyacrylamide network. Results show that the calculated number of translocations in patient samples using both analyses were comparable. We conclude that CE is a sensitive, non-radioactive, fast and accurate method for quantitation of competitive PCR products.     

Quantitation of polymerase chain reaction products by capillary electrophoresis using laser fluorescence

In samples where the amount of DNA is limited, the polymerase chain reaction (PCR) can amplify specific regions of the DNA. A quantitative analysis of the PCR product would be desirable to ensure sufficient DNA is available for analysis. In this study, we examine the use of capillary electrophoresis (CE) with laser fluorescence detection for quantitation of PCR products. A coated open tubular capillary was used with a non-gel sieving buffer and a fluorescent intercalating dye to obtain results within 20 minutes. Using an internal standard, peak migration time was below 0.1% relative standard deviation (R.S.D.) with a peak area precision of 3% R.S.D. In comparison to quantitation by hybridization, (i.e., slot blot) and spectrophotometric analysis, capillary electrophoresis shows distinct advantages due to its ability to separate unincorporated primers and PCR byproducts from the targeted PCR product. The results demonstrate that CE can be used to monitor the quality and quantity of the PCR product.     

The method of single-nucleotide variations detection using capillary electrophoresis and molecular beacons

We demonstrate that single-nucleotide variations in a DNA sequence can be detected using capillary electrophoresis (CE) and molecular beacons (MBs). In this method, the region surrounding the site of a nucleotide variation was amplified in a polymerase chain reaction, then hybridize PCR products with each of MBs. The sequences of the PCR products are different at the site of 2,044 in exon of interleukin (IL)-13 which to be identified. Through denaturation, the PCR product became single strand and hybridized with the completely complementary MB. The MB-target duplexes were separated using CE and solution-based fluorescence techniques. The results show that in each reaction a fluorescent response was elicited from the molecular beacon which was perfectly complementary to the amplified DNA, but not from the other MB whose probe sequence mismatched the target sequence. The method of CE based on MBs is able to identify single-nucleotide variations in a DNA sequence and can discriminate the genotyping of the SNP between the homo- and heteroduplexes of DNA fragments.     

Capillary electrophoresis as a clinical tool

Clinical laboratories must produce accurate results for patients with a minimum turn-around time. Automated commercial capillary electrophoresis instrumentation has been available to the clinical laboratory for the past five years. Our laboratory has utilised capillary electrophoresis (CE) to automate serum protein electrophoresis. We have used the technique of CE to produce clinical results for nearly two years. CE methods are also available for the quantitation of haemoglobin variants, by both isoelectric focusing and free solution techniques. Micellar electrokinetic separations by CE have been developed for some specialised drug assays and for B-group vitamin analysis, while gel-filled capillaries have the capability to separate DNA fragments, such as PCR products. Isoenzyme analysis has shown possibilities by CE, but quantitative results are needed to be clinically useful. Analysis of amino acids for newborn screening programs and as an arterial clotting indicator are being developed. The next five years should see a proliferation of clinical laboratory methods using automated CE.     

基于毛细管电泳的快速检测七种人冠状病毒技术方法的建立

近来,一种新型冠状病毒(SARS-CoV-2)引发的COVID-19突发疫情,给全球公众健康和社会经济构成严重威胁。SARS-CoV-2成为继人冠状病毒229E(Human coronavirus 229E,HCoV-229E)、人冠状病毒OC43(Human coronavirus OC43,HCoV-OC43)、严重急性呼吸综合征冠状病毒(Severe acute respiratory syndrome coronavirus,SARS-CoV)、人冠状病毒NL63(Human coronavirus NL63,HCoV-NL63)、人冠状病毒HKU1(Human coronavirus HKU1,HCoV-HKU1)和中东呼吸综合征冠状病毒(Middle East respiratory syndrome coronavirus,MERS-CoV)后第七种感染人类的冠状病毒。本研究以高分辨毛细管电泳技术为基础,针对七种人冠状病毒基因保守区分别设计特异性引物对,经常规PCR扩增后,通过具备单碱基差异分辨率的毛细管电泳分析,实现快速检测七种人冠状病毒的目标。通过构建基于毛细管电泳的人冠状病毒分子靶标,实现同时快速精准鉴定七种人冠状病毒的目的。本研究建立的人冠状病毒毛细管电泳快速检测技术方法具有极高灵敏性和精确性,分辨率高而且特异性好,操作简便成本低廉,为人冠状病毒的临床诊断、口岸快速检测等提供了新的技术支持。     

Chromatographic and capillary electrophoretic methods for the analysis of nicotinic acid and its metabolites

Methods for the assay of nicotinic acid (NiAc) and its metabolites in biological fluids using high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE) are reviewed. Most of the references cited in this review concern HPLC methods. A few CE methods that have been recently reported are also included. As these compounds are relatively polar and have a wide range of physico-chemical properties, the sample pre-treatment or clean-up process prior to analysis is included. Most HPLC methods using an isocratic elution system allow determination of a single or few metabolites, but gradient HPLC methods enable simultaneous determination of five to eight compounds. Simultaneous determination of NiAc including many metabolites in a single run can be achieved by CE. We also discuss the pharmacokinetics of NiAc and some of its metabolites.     

Tetrabutylammonium phosphate-assisted separation of multiplex polymerase chain reaction products in non-gel sieving capillary electrophoresis

A method based on non-gel sieving capillary electrophoresis (NGS–CE) with ultraviolet (UV) detection has been developed for the separation of multiplex polymerase chain reaction (PCR) products of three pathogenic bacteria in which hydroxypropylmethylcellulose was used as the sieving medium and dynamic capillary coating. In the method, an ion pair reagent, tetrabutylammonium phosphate (TBAP), was first used in NGS–CE to improve the detection sensitivities and resolutions of DNA fragments. The interaction of TBAP and DNA was proved using the UV spectra of DNA with and without TBAP. Field-enhanced sample injection was used as an on-line preconcentration method to improve the detection sensitivity. The separation of DNA fragments ranging from 100 to 1000 bp was accomplished in 30 min. Three pairs of primers and three PCR products of bacteria were successfully separated in 25 min using the developed method. The intraday relative standard deviations (RSDs) for the migration time and peak area for each PCR product were less than 2.4% (n = 5), and the interday RSDs were less than 6.1% (n = 15).     

Protein analysis by membrane preconcentration–capillary electrophoresis: systematic evaluation of parameters affecting preconcentration and separation

Fast and efficient analysis of proteins in physiological fluids is of great interest to researchers and clinicians alike. Capillary electrophoresis (CE) has proven to be a potentially valuable tool for the separation of proteins in specimens. However, a generally acknowledged drawback of this technique is the limited sample volumes which can be loaded onto the CE capillary which results in a poor concentration limit of detection. In addition, matrix components in samples may also interfere with separation and detection of analytes. Membrane preconcentration–CE (mPC–CE) has proved to be effective in overcoming these problems. In this report, we describe the systematic evaluation of parameters affecting on-line preconcentration/clean-up and separation of protein mixtures by mPC–CE. Method development was carried out with a standard mixture of proteins (lysozyme, myoglobin, carbonic anhydrase, and human serum albumin). First, using MALDI-TOF-MS, membrane materials with cation-exchange (R-SO₃H) or hydrophobic (C₂, C₈, C₁₈, SDB) characteristics were evaluated for their potential to retain proteins in mPC cartridges. Hydrophobic membranes were found most suitable for this application. Next, all mPC–CE analysis of protein samples were performed in polybrene coated capillaries and parameters affecting sample loading, washing and elution, such as the composition and volume of the elution solvent were investigated. Furthermore, to achieve optimal mPC–CE performance for the separation of protein mixtures parameters affecting postelution focusing and electrophoresis, including the composition of the background electrolyte and a trailing stacking buffer were varied. Optimal conditions for mPC–CE analysis of proteins using a C₂ impregnated membrane preconcentration (mPC) cartridge were achieved with a background electrolyte of 5% acetic acid and 2 mM ammonium acetate, 60 nl of 80% acetonitrile in H₂O as an elution solvent, and 60 nl of 0.5% ammonium hydroxide as a trailing stacking buffer. The developed method was used successfully to separate proteins in aqueous humor, which contains numerous proteins in a complex matrix of salts.     

Optimized sample preparation for tandem capillary electrophoresis single-stranded conformational polymorphism/ heteroduplex analysis

Here we describe DNA sample preparation methods that allow the rapid, simultaneous generation of both single-stranded conformational polymorphism (SSCP) and heteroduplex DNA elements from a single sample in a single tube, which are suitable for direct injection into a capillary electrophoresis (CE) instrument with excellent sensitivity of genetic mutation detection. The p53 gene was used as a model DNA region for this study, which was performed on a high-throughput MegaBACE 96-capillary array electrophoresis instrument. We found that, contrary to the practice common in slab-gel SSCP analysis, denaturants such as formamide are incompatible with this novel technique because they result in homo- and heteroduplex peak broadening in CE (possibly as a result of incomplete dsDNA re-hybridization) that reduces the peak resolution and hence the sensitivity of mutation detection. We also have found that PCR buffers, which are typically used to suspend samples for slab-gel heteroduplex analysis (HA), but which are less suitable for CE because of the presence of extra salt that reduces the efficiency of electrokinetic injection, may be substituted with a 10 mM Tris-HCI buffer (pH 8.5). The use of this Tris-HCl buffer for sample preparation provides both a high sensitivity of mutation detection by tandem SSCP/HA and high efficiency ofelectrokinetic injection by CE. In a related study (published elsewhere), we have applied this optimized protocol to the screening of a set of 32 mutant DNA samples from p53 exons 7 and 8 and recorded 100% sensitivity of mutation detection for tandem CE-SSCP/HA, whereas each individual method yielded lower sensitivity on its own (93% for SSCP and 75% for HA).     

Integrated allele-specific polymerase chain reaction-capillary electrophoresis microdevice for single nucleotide polymorphism genotyping

An integrated allele-specific (AS) polymerase chain reaction (PCR) and capillary electrophoresis (CE) microdevice has been developed for multiplex single nucleotide polymorphism (SNP) genotyping on a portable instrumentation, which was applied for on-site identification of HANWOO (Korean indigenous beef cattle). Twelve sets of primers were designed for targeting beef cattle's eleven SNP loci for HANWOO verification and one primer set for a positive PCR control, and the success rate for identification of HANWOO was demonstrated statistically. The AS PCR and CE separation for multiplex SNP typing was carried out on a glass-based microchip consisting of four layers: a microchannel plate for microfluidic control, a Pt-electrode plate for a resistance temperature detector (RTD), a poly(dimethylsiloxane) (PDMS) membrane and a manifold glass for microvalve function. The operation of the sample loading, AS PCR, microvalve, and CE on a chip was automated with a portable genetic analyzer, and the laser-induced fluorescence detection was performed on a miniaturized fluorescence detector. The blind samples were correctly identified as a HANWOO by showing one or two amplicon peaks in the electropherogram, while the imported beef cattle revealed more than five peaks. Our genetic analysis platform provides rapid, accurate, and on-site multiplex SNP typing.     

Highly sensitive revealing of PCR products with capillary electrophoresis based on single photon detection

Post-PCR fragment analysis was conducted using our single photon detection-based DNA sequencing instrument in order to substantially enhance the detection of nucleic biomarkers. Telomerase Repeat Amplification Protocol assay was used as a model for real-time PCR-based amplification and detection of DNA. Using TRAPeze XL kit, telomerase-extended DNA fragments were obtained in extracts of serial 10-fold dilutions of telomerase-positive cells, then amplified and detected during 40-cycle real-time PCR. Subsequently, characteristic 6-base DNA ladder patterns were revealed in the post-PCR samples with capillary electrophoresis (CE). In our CE instrument, fluorescently labeled DNA fragments separate in a single-capillary module and are illuminated by a fiberized Ar-ion laser. The laser-induced fluorescence (LIF) is filtered and detected by the fiberized single photon detector (SPD). To assess the sensitivity of our instrument, we performed PCR at fewer cycles (29 and 25), so that the PCR machine could detect amplification only in the most concentrated samples, and then examined samples with CE. Indeed, PCR has detected amplification in samples with minimum 10(4) cells at 29 cycles and over 10(5) cells at 25 cycles. In contrast, the SPD-based CE-LIF has revealed 6-base repeats in samples with as low as 10(2) cells after 29 cycles and 10(3) cells after 25 cycles. Thus, we have demonstrated 100- to 1000-fold increase in the sensitivity of biomarker detection over real-time PCR, making our approach especially suitable for analysis of clinical samples where abundant PCR inhibitors often cause false-negative results.     

A Computational Framework for Mechanical Response of Macromolecules: Application to the Salt Concentration Dependence of DNA Bendability

A computational framework is presented for studying the mechanical response of macromolecules. The method combines a continuum mechanics (CM) model for the mechanical properties of the macromolecule with a continuum electrostatic (CE) treatment of solvation. The molecules are represented by their shape and key physicochemical characteristics such as the distribution of materials properties and charge. As a test case, we apply the model to the effect of added salt on the bending of DNA. With a simple representation of DNA, the CM/CE framework using a Debye-Hückel model leads to results that are in good agreement with both analytical theories and recent experiments, including a modified Odijk-Skolnick-Fixman theory that takes the finite length of DNA into consideration. Calculations using a more sophisticated CE model (Poisson-Boltzmann), however, suffer from convergence problems, highlighting the importance of balancing numerical accuracy in the CM and CE models when dealing with very large systems, particularly those with a high degree of symmetry.     

Phenotypic and genotypic characterization of competitive exclusion products for use in poultry

AIMS: Phenotypic and genotypic bacteria identification methods were compared for their efficacy in determining the composition of competitive exclusion (CE) products. METHODS AND RESULTS: Phenotypic methods used for bacterial identification were fatty acid methyl ester profiles, biochemical assays and carbohydrate utilization profiles. Genotypic methods were MicroSeq16S rRNA sequence analysis and BLAST searches of the GenBank sequence database. Agreement between phenotypic and genotypic methods for identification of bacteria isolated from the Preempt CE product was 20%. A defined test mixture of bacteria was identified to the species level 100% by BLAST analysis, 64% by MicroSeq and 36% by phenotypic techniques. CONCLUSIONS: The wide range of facultative and obligate anaerobic bacteria present in a CE product are more accurately identified with 16S rRNA sequence analyses than with phenotypic identification techniques. SIGNIFICANCE AND IMPACT OF THE STUDY: These results will provide guidelines for manufacturers of CE products to submit more reliable product information for market approval by regulatory agencies.     

Inverse fusion PCR cloning

Inverse fusion PCR cloning (IFPC) is an easy, PCR based three-step cloning method that allows the seamless and directional insertion of PCR products into virtually all plasmids, this with a free choice of the insertion site. The PCR-derived inserts contain a vector-complementary 5'-end that allows a fusion with the vector by an overlap extension PCR, and the resulting amplified insert-vector fusions are then circularized by ligation prior transformation. A minimal amount of starting material is needed and experimental steps are reduced. Untreated circular plasmid, or alternatively bacteria containing the plasmid, can be used as templates for the insertion, and clean-up of the insert fragment is not urgently required. The whole cloning procedure can be performed within a minimal hands-on time and results in the generation of hundreds to ten-thousands of positive colonies, with a minimal background.     

Evaluating the cascading-use of wood furniture: How value-retention processes can contribute to material efficiency and circularity

As utilized technical products, durable wood furniture plays an important role in a future circular economy (CE). However, contemporary CE literature predominantly focuses on wood's biochemical properties and its potential as a consumable material within the bio-cycle. This perspective prevents meaningful consideration of CE strategies for the wood products sector, particularly for value-retention processes (VRPs), including reuse, repair, and refurbishment. We adapt and apply the VRP model introduced by the UN International Resource Panel (IRP) to wood furniture products to quantify select environmental benefits made possible through cascading-use, via VRPs (vs. new manufacturing). Unlike traditional life cycle assessment (LCA), this model accounts for impacts incurred and avoided through product life-extension and VRPs, relative to conventional systems of new manufacturing, disposal, and replacement. Three case studies of wood-based chairs are conducted to demonstrate this new application of the VRP model to compare the relative environmental impacts associated with wood furniture that is diverted to cascading-use, prior to recycling. In collaboration with industry partners, new material requirements (kg/unit), energy requirements (kWh/unit), emissions (kg CO2-e./unit), and waste generation (kg/unit) were calculated for newly manufactured chairs (OEM new) and subsequent cascading-use via reuse, repair, and refurbishment. The differing degrees of environmental impact avoidance and material efficiency are presented for each case study product and VRP, to provoke discussion and future research regarding the effective and optimal utilization of technical, durable wooden furniture within a CE.     

Capillary electrophoresis of recombinant proteins

Many naturally occurring proteins which are used therapeutically have been cloned and expressed in large quantities in bacterial, yeast or mammalian systems. Purification of these proteins by column chromatography generates high purity products with low levels of host protein contaminants. However, isoforms of the desired protein may be present at variable concentrations. Analysis of these variant forms has been enhanced by the utilisation of capillary electrophoresis (CE), a highly efficient, widely applicable technique which is increasingly used in the field of biotechnology. The role of CE in the analysis of recombinant proteins is reviewed with respect to microcharacterisation, comparison of natural and recombinant proteins, separation of mutant or variant forms and analysis of glycoforms. Examples of these applications are described and illustrated with analysis of recombinant human albumin. The rapid development of CE, further enhancing its versatility, and its use with complementary analytical techniques is also discussed.     

Methylation-dependent fragment separation: direct detection of DNA methylation by capillary electrophoresis of PCR products from bisulfite-converted genomic DNA

Fundamental to understanding the role of cytosine (C) methylation in genomic DNA (gDNA) is the need for robust analysis methods to determine the location and degree of this modification. We report a novel method for methylation detection by denaturing capillary electrophoresis (CE) using standard fragment analysis conditions. Bisulfite treatment of gDNA will selectively deaminate C but not 5-methylcytosine (5mC). Amplicons generated from bisulfite-converted gDNA are analyzed immediately after PCR using a 6-carboxy fluorescein (6-FAM) dye-labeled primer. The amplicons from methylated and unmethylated gDNA separate based solely on base composition due to the presence of multiple C versus thymine (T) differences. By direct detection of PCR amplicons following PCR using primers that anneal independent of methylation status, the overall workflow from gDNA sample input to data analysis is relatively simple. Furthermore, the same PCR product is suitable for additional analyses such as direct sequencing, cloning and sequencing, single-base extension, and post-PCR incorporation of a modified dCTP, the latter of which allows resolution of amplicons with as little as a single C/T difference. We show the utility of this novel CE detection assay by analyzing the hypermethylated region of the fragile-X FMR1 locus.