PCR with degenerate primers amplifies a subgenomic DNA fragment from the endoglucanase gene(s) of Torula thermophila, a thermophilic fungus

The aim of this study was to enable the polymerase chain reaction (PCR) amplification of DNA fragments within endoglucanase gene(s) of Torula thermophila, by using degenerate primers so that the amplified fragment(s) could be used as homologous probe(s) for cloning of full-length endoglucanase gene(s). The design of the degenerate PCR primers was mainly based on the endoglucanase sequences of other fungi. The endoglucanase gene sequence of Humicola insolens was the only sequence from a thermophilic fungus publicly available in the literature. Therefore, the endoglucanase sequences of the two Trichoderma species, Trichoderma reesei and Trichoderma longibrachiatum, were used to generalize the primers. PCR amplification of T. thermophila genomic DNA with these primers resilied in a specific amplification. The specificity of the amplified fragment was shown by Southern hybridization analysis using egl3 gene of T. reesei as probe. This result suggested that the degenerate primers used in this study may be of value for studies aimed at cloning of endoglucanase genes from a range of related fungi.     

Isolation and characterization of a mouse subtelomeric sequence

A mouse subtelomeric sequence, ST1, was generated from genomic DNA of the mouse HR9 (129/Sv origin) cell line by the polymerase chain reaction (PCR) using a single telomeric primer. ST1 was cloned and characterized: it is composed of 670 bp of novel DNA sequence flanked on each end by inverted telomeric hexanucleotide repeats (TTAGGG)_n. PCR amplification from BALB/c mouse DNA using this single primer gave the same major product. Southern analysis and PCR using internal ST1 primers confirmed that the ST1 sequence is present in mouse genomic DNA. In situ hybridization to metaphase chromosomes of SJL origin mapped ST1 to many, if not every, mouse telomere. PCR experiments using different combinations of the telomeric, minor satellite, and ST1 primers indicated that some ST1 copies are adjacent to minor satellite sequences, that telomeric and ST1 sequences are not generally interspersed with minor satellite sequences,and that ST1 and the minor satellite have a consistent and specific orientation relative to each other and to the telomere.by H.F. Willard     

Identification of pathogenic yeast species by polymerase chain reaction amplification of the RPS0 gene intron fragment

Aims: This work focuses on the development of a method for the identification of pathogenic yeast. With this aim, we target the nucleotide sequence of the RPS0 gene of pathogenic yeast species with specific PCR primers. PCR analysis was performed with both the genomic DNA, whole cells of clinical isolates of Candida species and clinical samples. Methods and Results: A single pairs of primers, deduced from the nucleotide sequence of the RPS0 gene from pathogenic yeast, were used in PCR analysis performed with both the genomic DNA and whole cells of clinical isolates of Candida species and clinical samples. The primers designed are highly specific for their respective species and produce amplicons of the expected sizes and fail to amplify any DNA fragment from the other species tested. The set of primers was tested successfully for the identification of yeast from colonies, blood cultures and clinical samples. These results indicate that genes containing intron sequences may be useful for designing species‐specific primers for the identification of fungal strains by PCR. The sensitivity of the method with genomic DNA was evaluated with decreasing DNA concentrations (200 ng to 1 pg) and different cell amounts (10⁷–10⁵ cells). Conclusion: The results obtained show that the amplification of RPS0 sequences may be suitable for the identification of pathogenic and other yeast species. Significance and Impact of the Study: Identification of Candida species using molecular approaches with high discriminatory power is important in determining adequate measures for the interruption of transmission of this yeast. The approach described in this work is based on standard technology, and it is specific, sensitive and does not involve complex and expensive equipment. Furthermore, the method developed in this work not only can be used in eight yeast species, but also provides the basis to design primers for other fungi species of clinical, industrial or environmental interest.     

Genetic basis of enterobacterial repetitive intergenic consensus (ERIC)-PCR fingerprint pattern in Sinorhizobium meliloti and identification of S. meliloti employing PCR primers derived from an ERIC-PCR fragment

The enterobacterial repetitive intergenic consensus (ERIC)-PCR method was employed to generate genomic amplification products of Sinorhizobium meliloti strain 2011. Eleven distinctive PCR fragments obtained in PCR reactions by using the ERIC2 primer were cloned and their partial or complete nucleotide sequences established. DNA sequences that extended past the ERIC2 primer region were not conserved among the 11 PCR fragments and showed no sequence similarity to the enterobacterial ERIC consensus sequence. Thus, repetitive ERIC or ERIC-like sequences seem not to be an integral part of the S. meliloti genome. An amplification product of S. meliloti 2011 was identified which was present in S. meliloti strains but absent in other rhizobial species. Based on the nucleotide sequence information, a pair of PCR primers was designed and used for PCR amplification of sequences of S. meliloti laboratory strains 2011, L5–30, AK631 and 102F34. Nucleotide sequence analysis of the amplification products revealed a 100% DNA sequence conservation. Database searches showed that the DNA fragment putatively encodes the C-terminal part of a protein displaying similarity to 2-hydroxyacid dehydrogenases of various organisms. The newly designed PCR primers should be useful for the rapid identification of S. meliloti isolates. Received: 17 February 1999 / Accepted: 9 April 1999     

Headloop suppression PCR and its application to selective amplification of methylated DNA sequences

Selective amplification in PCR is principally determined by the sequence of the primers and the temperature of the annealing step. We have developed a new PCR technique for distinguishing related sequences in which additional selectivity is dependent on sequences within the amplicon. A 5′ extension is included in one (or both) primer(s) that corresponds to sequences within one of the related amplicons. After copying and incorporation into the PCR product this sequence is then able to loop back, anneal to the internal sequences and prime to form a hairpin structure—this structure is then refractory to further amplification. Thus, amplification of sequences containing a perfect match to the 5′ extension is suppressed while amplification of sequences containing mismatches or lacking the sequence is unaffected. We have applied Headloop PCR to DNA that had been bisulphite-treated for the selective amplification of methylated sequences of the human GSTP1 gene in the presence of up to a 10⁵-fold excess of unmethylated sequences. Headloop PCR has a potential for clinical application in the detection of differently methylated DNAs following bisulphite treatment as well as for selective amplification of sequence variants or mutants in the presence of an excess of closely related DNA sequences.     

Detection of Pseudomonas savastanoi pv. savastanoi in Olive Plants by Enrichment and PCR

The sequence of the gene iaaL of Pseudomonas savastanoi EW2009 was used to design primers for PCR amplification. The iaaL-derived primers directed the amplification of a 454-bp fragment from genomic DNA isolated from 70 strains of P. savastanoi, whereas genomic DNA from 93 non-P. savastanoi isolates did not yield this amplified product. A previous bacterial enrichment in the semiselective liquid medium PVF-1 improved the PCR sensitivity level, allowing detection of 10 to 100 CFU/ml of plant extract. P. savastanoi was detected by the developed enrichment-PCR method in knots from different varieties of inoculated and naturally infected olive trees. Moreover, P. savastanoi was detected in symptomless stem tissues from naturally infected olive plants. This enrichment-PCR method is more sensitive and less cumbersome than the conventional isolation methods for detection of P. savastanoi.     

Rapid isolation of flanking genomic DNA using biotin-RAGE, a variation of single-sided polymerase chain reaction.

A method is described for quickly and reproducibly isolating genomic DNA contiguous with known DNA sequence by means of the polymerase chain reaction (PCR). Flanking genomic DNA is isolated using a biotinylated sequence-specific primer in combination with a generic hybrid primer that binds to a deoxyoligonucleotide sequence artificially added to the ends of the genomic DNA. Amplified sequences that include the biotinylated primer are purified from nonbiotinylated amplification products by binding to a solid-phase streptavidin matrix. The biotinylated amplification product(s) are subjected to a further round of amplification, after which they can be subcloned and analyzed. This technique was applied to the isolation of three intron-exon junctions. Verification of the identify of these junction sequences was accomplished by designing primers based on the intron sequences isolated by Biotin-RAGE, amplifying across the exon using these intron primers, and sequencing the PCR-generated product.     

A strategy to study gene polymorphism by direct sequence analysis of cosmid clones and amplified genomic DNA

A two-step strategy is described here to rapidly analyze gene-sequence variation or polymorphism. First, DNA sequences flanking the coding region of the gene to be analyzed are determined directly from a cosmid clone, including the gene, using the modified T7 DNA polymerase and sequencing primers based on the cDNA sequence of the gene. Second, the identified gene-flanking sequences are used to design amplification primers for the polymerase chain reaction (PCR) to permit amplification of DNA segments of up to 1 kilobase in genomic DNA from multiple individuals. These amplified DNA segments are directly sequenced using the thermostable Taq DNA polymerase.     

PCR-Based Detection of the Causal Agent of Watermark Disease in Willows (Salix spp.)

The watermark disease, caused by Brenneria salicis (formerly Erwinia salicis), is of significant concern wherever tree-forming willows are grown or occur naturally. The movement of infected, asymptomatic cuttings is a major cause of pathogen dispersal. A reliable and sensitive diagnostic procedure is necessary for the safe movement of willow planting material. We derived primers from the nucleotide sequence of the 16S rRNA gene of B. salicis for the development of a PCR to detect this pathogen. One set of primers, Es1a-Es4b, directed the amplification of a 553-bp fragment from B. salicis genomic DNA as well as B. salicis cells. PCR products were not observed when genomic DNA was tested for 27 strains of other, related plant-associated bacteria. Genomic fingerprinting by amplification fragment length polymorphism of B. salicis strains, originating from four different countries, and related Brenneria, Pectobacterium, and Erwinia strains revealed a very high similarity among the B. salicis genomes, indicating that the spread of the pathogen is mainly due to the transportation of infected cuttings. The PCR had to be preceded by a DNA extraction in order to detect the pathogen in the vascular fluid of willows. The minimum number of cells that could be detected from vascular fluid was 20 CFU/ml. The PCR assays proved to be very sensitive and reliable in detecting B. salicis in willow plant material.     

Rapid amplification of genomic ends (RAGE) as a simple method to clone flanking genomic DNA

This report describes the amplification of upstream genomic sequences using the polymerase chain reaction (PCR) based solely on downstream DNA information from a cDNA clone. In this novel and rapid technique, genomic DNA (gDNA) is first incubated with a restriction enzyme that recognizes a site within the 5′ end of a gene, followed by denaturation and polyadenylation of its free 3′ ends with terminal transferase. The modified gDNA is then used as template for PCR using a gene-specific primer complementary to a sequence in the 3′ end of its cDNA and an anchored deoxyoligothymidine primer. A second round of PCR is then performed with a second, nested gene-specific primer and the anchor sequence primer. The resulting PCR product is cloned and its sequence determined. Three independent plant genomic clones were isolated using this method that exhibited complete sequence identity to their cDNAs and to the primers used in the amplification.     

Development and cross-species/genera transferability of microsatellite markers discovered using 454 genome sequencing in chokecherry (Prunus virginiana L.)

Chokecherry (Prunus virginiana L.) (2n?=?4x?=?32) is a unique Prunus species for both genetics and disease-resistance research due to its tetraploid nature and X-disease resistance. However, no genetic and genomic information on chokecherry is available. A partial chokecherry genome was sequenced using Roche 454 sequencing technology. A total of 145,094 reads covering 4.8?Mbp of the chokecherry genome were generated and 15,113 contigs were assembled, of which 11,675 contigs were larger than 100?bp in size. A total of 481 SSR loci were identified from 234 (out of 11,675) contigs and 246 polymerase chain reaction (PCR) primer pairs were designed. Of 246 primers, 212 (86.2?%) effectively produced amplification from the genomic DNA of chokecherry. All 212 amplifiable chokecherry primers were used to amplify genomic DNA from 11 other rosaceous species (sour cherry, sweet cherry, black cherry, peach, apricot, plum, apple, crabapple, pear, juneberry, and raspberry). Thus, chokecherry SSR primers can be transferable across Prunus species and other rosaceous species. An average of 63.2 and 58.7?% of amplifiable chokecherry primers amplified DNA from cherry and other Prunus species, respectively, while 47.2?% of amplifiable chokecherry primers amplified DNA from other rosaceous species. Using random genome sequence data generated from next-generation sequencing technology to identify microsatellite loci appears to be rapid and cost-efficient, particularly for species with no sequence information available. Sequence information and confirmed transferability of the identified chokecherry SSRs among species will be valuable for genetic research in Prunus and other rosaceous species. Key message A total of 246 SSR primers were identified from chokecherry genome sequences. Of which, 212 were confirmed amplifiable both in chokecherry and other 11 other rosaceous species.     

A 'bacteriocin PCR array' for identification of bacteriocin-related structural genes in lactic acid bacteria

Bacteriocins have been identified in many strains of lactic acid bacteria (LAB) which are a source of natural food preservatives and microbial inhibitors. Our objectives were to use a PCR array of primers to identify bacteriocin structural genes in Bac⁺ LAB. DNA sequence homology at the 5′- and 3′-ends of the various structural genes indicated that non-specific priming may allow PCR amplification of heterologous bacteriocin genes. Successful amplification was obtained by real-time PCR and confirmed by melting curve and agarose gel analysis. Sequence information specific to targeted bacteriocin structural genes from the intra-primer regions of amplimers was compared to sequences residing in GenBank. The bacteriocin PCR array allowed the successful amplification of bacteriocin structural genes from strains of Lactobacillus, Lactococcus, and Pediococcus including one whose amino acid sequence was unable to be determined by Edman degradation analysis. DNA sequence analysis identified as many as 3 bacteriocin structural genes within a given strain, identifying ten unique bacteriocin sequences that were previously uncharacterized (partial homology) and one that was 100% identical to sequences in GenBank. This study provides a rapid approach to sequence and identify bacteriocin structural genes among Bac⁺ LAB using a microplate bacteriocin PCR array.     

Multiple methods for the identification of polymorphic simple sequence repeats (SSRs) in sorghum [Sorghum bicolor (L.) Moench]

Simple sequence repeats (SSRs), also known as microsatellites, are highly variable DNA sequences that can be used as markers for the genetic analysis of plants. Three approaches were followed for the development of PCR primers for the amplification of DNA fragments containing SSRs from sorghum [Sorghum bicolor (L.) Moench]: a search for sorghum SSRs in public DNA databases; the use of SSR-specific primers developed in the Poaceae species maize (Zea mays L.) and seashore paspalum grass (Paspalum vaginatum Swartz); and the screening of sorghum genomic libraries by hybridization with SSR oligonucleotides. A total of 49 sorghum SSR-specific PCR primer pairs (two designed from GenBank SSR-containing sequences and 47 from the sequences of genomic clones) were screened on a panel of 17 sorghum and one maize accession. Ten primer pairs from paspalum and 90 from maize were also screened for polymorphism in sorghum. Length polymorphisms among amplification products were detected with 15 of these primer pairs, yielding diversity values ranging from 0.2 to 0.8 with an average diversity of 0.56. These primer pairs are now available for use as markers in crop improvement and conservation efforts.     

A novel method to perform genomic walks using a combination of single strand DNA circularization and rolling circle amplification

Characterization of regions flanking a known sequence within a genome, known as genome walking, is a cornerstone technique in modern genetic analysis. In the present work we have developed a new PCR-dependent, directional genome walking protocol based on the unique circularization property of a novel DNA ligase, CircLigase. In the first step, PCR based primer extension is performed using a phosphorylated primer, designed to extend from the boundary of the known sequence, into the flanking region. This linear amplification results in the generation of single-stranded (ss) DNA, which is then circularized using CircLigase. Using the hyperbranching activity of Phi29 DNA polymerase, the circular ssDNA is then linearized by rolling circle amplification, resulting in copious amounts of double stranded concatameric DNA. Nested primers are used to amplify the flanking sequence using inverse PCR. The products are resolved on an agarose gel and the bands whose mobility change due to the nested location of the primer combination used are identified, extracted, and cloned into a plasmid vector for sequencing. Empirical proof for this concept was generated on two antimicrobial biosynthetic genes in Pseudomonas sp. LBUM300. Using the hcnB and phlD genes as starting points, ca 1 kb of flanking sequences were successfully isolated. The use of locus specific primers ensured both directionality and specificity of the walks, alleviating the generation of spurious amplicons, typically observed in randomly primed walking protocols. The presented genome walking protocol could be applied to any microbial genome and requires only 100-150 bp of prior sequence information. The proposed methodology does not entail laborious testing of restriction enzymes or adaptor ligation. This is the first report of a successful application of the novel ligase enzyme, CircLigase for genomic walking purposes.     

Selective and Sensitive Method for PCR Amplification of Escherichia coli 16S rRNA Genes in Soil

A set of PCR primers targeting 16S rRNA gene sequences was designed, and PCR parameters were optimized to develop a robust and reliable protocol for selective amplification of Escherichia coli 16S rRNA genes. The method was capable of discriminating E. coli from other enteric bacteria, including its closest relative, Shigella. Selective amplification of E. coli occurred only when the annealing temperature in the PCR was elevated to 72°C, which is 10°C higher than the optimum for the primers. Sensitivity was retained by modifying the length of steps in the PCR, by increasing the number of cycles, and most importantly by optimizing the MgCl₂ concentration. The PCR protocol developed can be completed in less then 2 h and, by using Southern hybridization, has a detection limit of ca. 10 genomic equivalents per reaction. The method was demonstrated to be effective for detecting E. coli DNA in heterogeneous DNA samples, such as those extracted from soil.     

A Rapid PCR-Based DNA Test for Enterotoxic Bacillus cereus

The occurrence of DNA sequences encoding the hemolysin HblA complex and Bacillus cereus enterotoxin BceT, which have recently been confirmed as enterotoxins, was studied in Bacillus spp. To amplify these DNA sequences, PCR primer systems for the B component of hblA and for bceT DNA sequences were developed. The results from the amplification of hblA sequences correlated well with results obtained with the B. cereus enterotoxin (diarrheal type) test kit (RPLA kit), but not with the results of the Bacillus diarrheal enterotoxin visual immunoassay (BDE kit). Except for two thermophilic strains, all strains that were positive in PCR amplification assays with the hblA primers were also positive when tested with the RPLA kit. The hblA DNA sequence was found in 33 strains, and these strains were closely related according to 16S rDNA-RFLP analysis, except B. pasteurii. In PCR amplifications with the bceT primers only the model strain gave a positive signal. It is concluded that screening of the hemolysin HblA complex by the PCR method allows faster detection of enterotoxin production than does testing with the RPLA enterotoxin kit.     

Generation of polymerase chain reaction-specific probes for library screening using single degenerate primers

Degenerate oligonucleotide primers were made to peptide sequences from hydroxylamine oxidoreductase (HAO) from Nitrosomonas europaea. The primers were used singly in PCR reactions to amplify portions of the gene for HAO from genomic DNA. Southern hybridizations using fragments amplified with each primer showed that they labeled the same genomic DNA fragments. The PCR-amplified fragments were successfully used to screen a gene library for clones containing the HAO gene. The method of isolating genes by PCR with single primers has general utility.     

Cloning,characterization, and heterologous expression of a novel glucosyltransferase gene from sophorolipid-producing Candida bombicola

Candida bombicola is well-studied for the production of a biosurfactant, the sophorolipids. In this paper, the cloning of a glucosyltransferase gene using polymerase-chain-reaction (PCR) technique is described. Degenerative primer-pairs were first designed based on the highly conserved amino-acid sequences of several selected yeast glucosyltransferases. Using these primers, an amplified sequence (amplicon) of 700 base-pair from C. bombicola was obtained and subsequently sequenced. Based on the sequence of this amplicon, additional target-specific PCR primers were designed for use in subsequent rounds of 3′- and 5′-extension using DNA walking technique to eventually obtain a C. bombicola genomic sequence containing an open-reading-frame putatively identified as a glucosyltransferase (gtf-1). The gene was subcloned in Saccharomyces cerevisiae for expression and functional characterization. Quantitative RT-PCR confirmed the expression of gtf-1 in the recombinant S. cerevisiae. In vitro assay with the sonicated cells of the recombinant yeast confirms the presence of glucosylation activity on sterol and hydroxy fatty acid substrates. This study reports for the first time the cloning and characterization of a broad-specificity lipid glucosylation gene from C. bombicola, and the functional activity of its gene product.     

Rapid and Unambiguous Detection of DNase I Hypersensitive Site in Rare Population of Cells

DNase I hypersensitive (DHS) sites are important for understanding cis regulation of gene expression. However, existing methods for detecting DHS sites in small numbers of cells can lead to ambiguous results. Here we describe a simple new method, in which DNA fragments with ends generated by DNase I digestion are isolated and used as templates for two PCR reactions. In the first PCR, primers are derived from sequences up- and down-stream of the DHS site. If the DHS site exists in the cells, the first PCR will not produce PCR products due to the cuts of the templates by DNase I between the primer sequences. In the second PCR, one primer is derived from sequence outside the DHS site and the other from the adaptor. This will produce a smear of PCR products of different sizes due to cuts by DNase I at different positions at the DHS site. With this design, we detected a DHS site at the CD4 gene in two CD4 T cell populations using as few as 2×10⁴ cells. We further validated this method by detecting a DHS site of the IL-4 gene that is specifically present in type 2 but not type 1 T helper cells. Overall, this method overcomes the interference by genomic DNA not cut by DNase I at the DHS site, thereby offering unambiguous detection of DHS sites in the cells.     

Detection and measurement of PCR bias in quantitative methylation analysis of bisulphite-treated DNA.

Methylation analysis of individual cytosines in genomic DNA can be determined quantitatively by bisulphite treatment and PCR amplification of the target DNA sequence, followed by restriction enzyme digestion or sequencing. Methylated and unmethylated molecules, however, have different sequences after bisulphite conversion. For some sequences this can result in bias during the PCR amplification leading to an inaccurate estimate of methylation. PCR bias is sequence dependent and often strand-specific. This study presents a simple method for detection and measurement of PCR bias for any set of primers, and investigates parameters for overcoming PCR bias.