Multiplexed MRM‐based quantitation of candidate cancer biomarker proteins in undepleted and non‐enriched human plasma

An emerging approach for multiplexed targeted proteomics involves bottom‐up LC‐MRM‐MS, with stable isotope‐labeled internal standard peptides, to accurately quantitate panels of putative disease biomarkers in biofluids. In this paper, we used this approach to quantitate 27 candidate cancer‐biomarker proteins in human plasma that had not been treated by immunoaffinity depletion or enrichment techniques. These proteins have been reported as biomarkers for a variety of human cancers, from laryngeal to ovarian, with breast cancer having the highest correlation. We implemented measures to minimize the analytical variability, improve the quantitative accuracy, and increase the feasibility and applicability of this MRM‐based method. We have demonstrated excellent retention time reproducibility (median interday CV: 0.08%) and signal stability (median interday CV: 4.5% for the analytical platform and 6.1% for the bottom‐up workflow) for the 27 biomarker proteins (represented by 57 interference‐free peptides). The linear dynamic range for the MRM assays spanned four orders‐of‐magnitude, with 25 assays covering a 10³–10⁴ range in protein concentration. The lowest abundance quantifiable protein in our biomarker panel was insulin‐like growth factor 1 (calculated concentration: 127 ng/mL). Overall, the analytical performance of this assay demonstrates high robustness and sensitivity, and provides the necessary throughput and multiplexing capabilities required to verify and validate cancer‐associated protein biomarker panels in human plasma, prior to clinical use.     

Using iRT, a normalized retention time for more targeted measurement of peptides

Multiple reaction monitoring (MRM) has recently become the method of choice for targeted quantitative measurement of proteins using mass spectrometry. The method, however, is limited in the number of peptides that can be measured in one run. This number can be markedly increased by scheduling the acquisition if the accurate retention time (RT) of each peptide is known. Here we present iRT, an empirically derived dimensionless peptide-specific value that allows for highly accurate RT prediction. The iRT of a peptide is a fixed number relative to a standard set of reference iRT-peptides that can be transferred across laboratories and chromatographic systems. We show that iRT facilitates the setup of multiplexed experiments with acquisition windows more than four times smaller compared to in silico RT predictions resulting in improved quantification accuracy. iRTs can be determined by any laboratory and shared transparently. The iRT concept has been implemented in Skyline, the most widely used software for MRM experiments.     

The selected reaction monitoring/multiple reaction monitoring-based mass spectrometry approach for the accurate quantitation of proteins: clinical applications in the cardiovascular diseases

Selected reaction monitoring, also known as multiple reaction monitoring, is a powerful targeted mass spectrometry approach for a confident quantitation of proteins/peptides in complex biological samples. In recent years, its optimization and application have become pivotal and of great interest in clinical research to derive useful outcomes for patient care. Thus, selected reaction monitoring/multiple reaction monitoring is now used as a highly sensitive and selective method for the evaluation of protein abundances and biomarker verification with potential applications in medical screening. This review describes technical aspects for the development of a robust multiplex assay and discussing its recent applications in cardiovascular proteomics: verification of promising disease candidates to select only the highest quality peptides/proteins for a preclinical validation, as well as quantitation of protein isoforms and post-translational modifications.     

Enhanced recovery of lyophilized peptides in shotgun proteomics by using an LC‐ESI‐MS compatible surfactant

LC‐ESI/MS/MS‐based shotgun proteomics is currently the most commonly used approach for the identification and quantification of proteins in large‐scale studies of biomarker discovery. In the past several years, the shotgun proteomics technologies have been refined toward further enhancement of proteome coverage. In the complex series of protocols involved in shotgun proteomics, however, loss of proteolytic peptides during the lyophilization step prior to the LC/MS/MS injection has been relatively neglected despite the fact that the dissolution of the hydrophobic peptides in lyophilized samples is difficult in 0.05–0.1% TFA or formic acid, causing substantial loss of precious peptide samples. In order to prevent the loss of peptide samples during this step, we devised a new protocol using Invitrosol (IVS), a commercially available surfactant compatible with ESI‐MS; by dissolving the lyophilized peptides in IVS, we show improved recovery of hydrophobic peptides, leading to enhanced coverage of proteome. Thus, the use of IVS in the recovery step of lyophilized peptides will help the shotgun proteomics analysis by expanding the proteome coverage, which would significantly promote the discovery and development of new diagnostic markers and therapeutic targets.     

Selected reaction monitoring for quantitative proteomics: a tutorial

Systems biology relies on data sets in which the same group of proteins is consistently identified and precisely quantified across multiple samples, a requirement that is only partially achieved by current proteomics approaches. Selected reaction monitoring (SRM)—also called multiple reaction monitoring—is emerging as a technology that ideally complements the discovery capabilities of shotgun strategies by its unique potential for reliable quantification of analytes of low abundance in complex mixtures. In an SRM experiment, a predefined precursor ion and one of its fragments are selected by the two mass filters of a triple quadrupole instrument and monitored over time for precise quantification. A series of transitions (precursor/fragment ion pairs) in combination with the retention time of the targeted peptide can constitute a definitive assay. Typically, a large number of peptides are quantified during a single LC‐MS experiment. This tutorial explains the application of SRM for quantitative proteomics, including the selection of proteotypic peptides and the optimization and validation of transitions. Furthermore, normalization and various factors affecting sensitivity and accuracy are discussed.     

Enhancing Data Reliability in TOMAHAQ for Large‐Scale Protein Quantification

The analytical scale of most mass‐spectrometry‐based targeted proteomics assays is usually limited by assay performance and instrument utilization. A recently introduced method, called triggered by offset, multiplexed, accurate mass, high resolution, and absolute quantitation (TOMAHAQ), combines both peptide and sample multiplexing to simultaneously improve analytical scale and quantitative performance. In the present work, critical technical requirements and data analysis considerations for successful implementation of the TOMAHAQ technique based on the study of a total of 185 target peptides across over 200 clinical plasma samples are discussed. Importantly, it is observed that significant interference originate from the TMTzero reporter ion used for the synthetic trigger peptides. This interference is not expected because only TMT10plex reporter ions from the target peptides should be observed under typical TOMAHAQ conditions. In order to unlock the great promise of the technique for high throughput quantification, here a post‐acquisition data correction strategy to deconvolute the reporter ion superposition and recover reliable data is proposed.     

EBprot: Statistical analysis of labeling‐based quantitative proteomics data

Labeling‐based proteomics is a powerful method for detection of differentially expressed proteins (DEPs). The current data analysis platform typically relies on protein‐level ratios, which is obtained by summarizing peptide‐level ratios for each protein. In shotgun proteomics, however, some proteins are quantified with more peptides than others, and this reproducibility information is not incorporated into the differential expression (DE) analysis. Here, we propose a novel probabilistic framework EBprot that directly models the peptide‐protein hierarchy and rewards the proteins with reproducible evidence of DE over multiple peptides. To evaluate its performance with known DE states, we conducted a simulation study to show that the peptide‐level analysis of EBprot provides better receiver‐operating characteristic and more accurate estimation of the false discovery rates than the methods based on protein‐level ratios. We also demonstrate superior classification performance of peptide‐level EBprot analysis in a spike‐in dataset. To illustrate the wide applicability of EBprot in different experimental designs, we applied EBprot to a dataset for lung cancer subtype analysis with biological replicates and another dataset for time course phosphoproteome analysis of EGF‐stimulated HeLa cells with multiplexed labeling. Through these examples, we show that the peptide‐level analysis of EBprot is a robust alternative to the existing statistical methods for the DE analysis of labeling‐based quantitative datasets. The software suite is freely available on the Sourceforge website http://ebprot.sourceforge.net/ . All MS data have been deposited in the ProteomeXchange with identifier PXD001426 ( http://proteomecentral.proteomexchange.org/dataset/PXD001426/ ).     

Targeted proteomics on its way to discovery

For a long time, targeted and discovery proteomics covered different corners of the detection spectrum, with targeted proteomics focused on small target sets. This changed with the recent advances in highly multiplexed analysis. While discovery proteomics still pushes higher numbers of identified and quantified proteins, the advances in targeted proteomics rose to cover large parts of less complex proteomes or proteomes with low protein detection counts due to dynamic range restrictions, like the blood proteome. These new developments will impact, especially on the field of biomarker discovery and the possibility of using targeted proteomics for diagnostic purposes.     

Multiplexed LC‐MS/MS analysis of horse plasma proteins to study doping in sport

The development of protein biomarkers for the indirect detection of doping in horse is a potential solution to doping threats such as gene and protein doping. A method for biomarker candidate discovery in horse plasma is presented using targeted analysis of proteotypic peptides from horse proteins. These peptides were first identified in a novel list of the abundant proteins in horse plasma. To monitor these peptides, an LC‐MS/MS method using multiple reaction monitoring was developed to study the quantity of 49 proteins in horse plasma in a single run. The method was optimised and validated, and then applied to a population of race‐horses to study protein variance within a population. The method was finally applied to longitudinal time courses of horse plasma collected after administration of an anabolic steroid to demonstrate utility for hypothesis‐driven discovery of doping biomarker candidates.     

Detection of Mycobacterium tuberculosis Peptides in the Exosomes of Patients with Active and Latent M. tuberculosis Infection Using MRM-MS

The identification of easily measured, accurate diagnostic biomarkers for active tuberculosis (TB) will have a significant impact on global TB control efforts. Because of the host and pathogen complexities involved in TB pathogenesis, identifying a single biomarker that is adequately sensitive and specific continues to be a major hurdle. Our previous studies in models of TB demonstrated that exosomes, such as those released from infected macrophages, contain mycobacterial products, including many Mtb proteins. In this report, we describe the development of targeted proteomics assays employing multiplexed multiple reaction monitoring mass spectrometry (MRM-MS) in order to allow us to follow those proteins previously identified by western blot or shotgun mass spectrometry, and enhance biomarker discovery to include detection of Mtb proteins in human serum exosomes. Targeted MRM-MS assays were applied to exosomes isolated from human serum samples obtained from culture-confirmed active TB patients to detect 76 peptides representing 33 unique Mtb proteins. Our studies revealed the first identification of bacteria-derived biomarker candidates of active TB in exosomes from human serum. Twenty of the 33 proteins targeted for detection were found in the exosomes of TB patients, and included multiple peptides from 8 proteins (Antigen 85B, Antigen 85C, Apa, BfrB, GlcB, HspX, KatG, and Mpt64). Interestingly, all of these proteins are known mycobacterial adhesins and/or proteins that contribute to the intracellular survival of Mtb. These proteins will be included as target analytes in future validation studies as they may serve as markers for persistent active and latent Mtb infection. In summary, this work is the first step in identifying a unique and specific panel of Mtb peptide biomarkers encapsulated in exosomes and reveals complex biomarker patterns across a spectrum of TB disease states.     

MRMaid 2.0: Mining PRIDE for Evidence-Based SRM Transitions

Abstract Selected reaction monitoring (SRM) is becoming the tool of choice for targeted quantitative proteomics. The fundamental principle of proteomic SRM is that, for a given protein of interest, there is a set of peptides that are unique to that protein. The characteristic retention time (RT), and intact peptide m/z of these so-called proteotypic peptides are then programmed into the mass spectrometer, along with the m/z of high-intensity product ions for targeted quantitation. The particular combination of RT, peptide m/z, and product m/z for a given peptide is referred to as a transition. Selection of the most appropriate set of transitions for a given set of proteins is crucial to any SRM experiment. We previously developed the web-based MRMaid tool, which suggested the optimal transitions for a given human protein by mining spectral evidence from a small in-house database. In this article we present a completely new implementation of MRMaid, which offers substantial improvements over the original. The new version, MRMaid 2.0, uses spectra from the EBI's PRIDE database, which massively increases the coverage and quality of transitions. Transition lists can now be generated for multiple proteins simultaneously, edited within the web browser, and exported for laboratory use.     

Multiplexed mass spectrometric immunoassay in biomarker research: a novel approach to the determination of a myocardial infarct

Reported here is the development of a multiplexed mass spectrometric immunoassay (MSIA) for the detection of myocardial infarction (MI). The assay is the product of a study that systematically progresses from biomarker discovery--to identification and verification--to assay design, data analysis, and statistical challenge. During targeted population proteomics investigations, two novel biomarkers, serum amyloid A1alpha and S-sulfated transthyretin, were found to be responsive to MI. These putative markers were subsequently screened in larger cohorts of individuals to verify their responsiveness toward MI. Upon verification, a multiplexed assay was designed that was capable of simultaneously monitoring the new markers plus a previously established MI-marker (myoglobin). The multiplexed MSIA was applied to two 96-sample sets comprised of 48-MI/48-healthy and 19-MI/77-healthy, which served as training and case cohorts, respectively. Data evaluation using either preset reference levels or multivariate analysis exhibited sensitivities and specificities of >97%. These findings illustrate the importance of using systematic approaches in clinical proteomics to discover biomarkers and produce high-performance assays relevant to disease.     

SWATH enables precise label‐free quantification on proteome scale

MS‐based proteomics has emerged as a powerful tool in biological studies. The shotgun proteomics strategy, in which proteolytic peptides are analyzed in data‐dependent mode, enables a detection of the most comprehensive proteome (>10 000 proteins from whole‐cell lysate). The quantitative proteomics uses stable isotopes or label‐free method to measure relative protein abundance. The isotope labeling strategies are more precise and accurate compared to label‐free methods, but labeling procedures are complicated and expensive, and the sample number and types are also limited. Sequential window acquisition of all theoretical mass spectra (SWATH) is a recently developed technique, in which data‐independent acquisition is coupled with peptide spectral library match. In principle SWATH method is able to do label‐free quantification in an MRM‐like manner, which has higher quantification accuracy and precision. Previous data have demonstrated that SWATH can be used to quantify less complex systems, such as spiked‐in peptide mixture or protein complex. Our study first time assessed the quantification performance of SWATH method on proteome scale using a complex mouse‐cell lysate sample. In total 3600 proteins got identified and quantified without sample prefractionation. The SWATH method shows outstanding quantification precision, whereas the quantification accuracy becomes less perfect when protein abundances differ greatly. However, this inaccuracy does not prevent discovering biological correlates, because the measured signal intensities had linear relationship to the sample loading amounts; thus the SWATH method can predict precisely the significance of a protein. Our results prove that SWATH can provide precise label‐free quantification on proteome scale.     

MMS2plot: An R Package for Visualizing Multiple MS/MS Spectra for Groups of Modified and Non‐Modified Peptides

A large number of post‐translational modifications (PTMs) in proteins are buried in the unassigned mass spectrometric (MS) spectra in shot‐gun proteomics datasets. Because the modified peptide fragments are low in abundance relative to the corresponding non‐modified versions, it is critical to develop tools that allow facile evaluation of assignment of PTMs based on the MS/MS spectra. Such tools will preferably have the ability to allow comparison of fragment ion spectra and retention time between the modified and unmodified peptide pairs or group. Herein, MMS2plot, an R package for visualizing peptide‐spectrum matches (PSMs) for multiple peptides, is described. MMS2plot features a batch mode and generates the output images in vector graphics file format that facilitate evaluation and publication of the PSM assignment. MMS2plot is expected to play an important role in PTM discovery from large‐scale proteomics datasets generated by liquid chromatography‐MS/MS. The MMS2plot package is freely available at https://github.com/lileir/MMS2plot under the GPL‐3 license.     

ICPLQuant – A software for non‐isobaric isotopic labeling proteomics

The main goal of many proteomics experiments is an accurate and rapid quantification and identification of regulated proteins in complex biological samples. The bottleneck in quantitative proteomics remains the availability of efficient software to evaluate and quantify the tremendous amount of mass spectral data acquired during a proteomics project. A new software suite, ICPLQuant, has been developed to accurately quantify isotope‐coded protein label (ICPL)‐labeled peptides on the MS level during LC‐MALDI and peptide mass fingerprint experiments. The tool is able to generate a list of differentially regulated peptide precursors for subsequent MS/MS experiments, minimizing time‐consuming acquisition and interpretation of MS/MS data. ICPLQuant is based on two independent units. Unit 1 performs ICPL multiplex detection and quantification and proposes peptides to be identified by MS/MS. Unit 2 combines MASCOT MS/MS protein identification with the quantitative data and produces a protein/peptide list with all the relevant information accessible for further data mining. The accuracy of quantification, selection of peptides for MS/MS‐identification and the automated output of a protein list of regulated proteins are demonstrated by the comparative analysis of four different mixtures of three proteins (Ovalbumin, Horseradish Peroxidase and Rabbit Albumin) spiked into the complex protein background of the DGPF Proteome Marker.     

PROCAL: A Set of 40 Peptide Standards for Retention Time Indexing,Column Performance Monitoring,and Collision Energy Calibration

Beyond specific applications, such as the relative or absolute quantification of peptides in targeted proteomic experiments, synthetic spike‐in peptides are not yet systematically used as internal standards in bottom‐up proteomics. A number of retention time standards have been reported that enable chromatographic aligning of multiple LC–MS/MS experiments. However, only few peptides are typically included in such sets limiting the analytical parameters that can be monitored. Here, we describe PROCAL (ProteomeTools Calibration Standard), a set of 40 synthetic peptides that span the entire hydrophobicity range of tryptic digests, enabling not only accurate determination of retention time indices but also monitoring of chromatographic separation performance over time. The fragmentation characteristics of the peptides can also be used to calibrate and compare collision energies between mass spectrometers. The sequences of all selected peptides do not occur in any natural protein, thus eliminating the need for stable isotope labeling. We anticipate that this set of peptides will be useful for multiple purposes in individual laboratories but also aiding the transfer of data acquisition and analysis methods between laboratories, notably the use of spectral libraries.     

Shortlisting SARS‐CoV‐2 Peptides for Targeted Studies from Experimental Data‐Dependent Acquisition Tandem Mass Spectrometry Data

Detection of severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) is a crucial tool for fighting the COVID‐19 pandemic. This dataset brief presents the exploration of a shotgun proteomics dataset acquired on SARS‐CoV‐2 infected Vero cells. Proteins from inactivated virus samples were extracted, digested with trypsin, and the resulting peptides were identified by data‐dependent acquisition tandem mass spectrometry. The 101 peptides reporting for six viral proteins were specifically analyzed in terms of their analytical characteristics, species specificity and conservation, and their proneness to structural modifications. Based on these results, a shortlist of 14 peptides from the N, S, and M main structural proteins that could be used for targeted mass‐spectrometry method development and diagnostic of the new SARS‐CoV‐2 is proposed and the best candidates are commented.     

Development of selected reaction monitoring‐MS methodology to measure peptide biomarkers in prostate cancer

Prostate cancer is a leading cause of cancer‐related death. The current modality of diagnosis, the measurement of serum PSA, not only suffers from lack of specificity, but does not distinguish clinical cases in which current treatment measures would be most successful, i.e. aggressive, life‐threatening tumors. A multiplexed MS methodology, selected reaction monitoring‐MS/MS coupled with stable isotope dilution (SID), was developed and tested in both cells lines and clinical tissue samples. Standard curves were generated for two peptides representing PSA and one peptide from each of two additional orthogonally validated biomarkers, AMACR and EZH2. The standard curves show high reproducibility, sensitivity, and good linearity. All four peptides were then measured in six clinically relevant cell lines and are in agreement with the biochemical characteristics of each individual cell line. The SID selected reaction monitoring‐MS/MS methodology was then transferred to tissue samples, in which the assay shows potential to differentiate benign disease from localized cancer and localized cancer from aggressive metastatic disease. These results establish the preliminary development of a rational targeted MS platform that strives to bridge the gap between discovery and validation of biomarkers for the detection of prostate cancer.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.