Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells

2D organic–inorganic hybrid Ruddlesden–Popper perovskites have emerged recently as candidates for the light‐absorbing layer in solar cell technology due largely to their impressive operational stability compared with their 3D‐perovskite counterparts. The methods reported to date for the preparation of efficient 2D perovksite layers for solar cells involve a nonscalable spin‐coating step. In this work, a facile, spin‐coating‐free, directly scalable drop‐cast method is reported for depositing precursor solutions that self‐assemble into highly oriented, uniform 2D‐perovskite films in air, yielding perovskite solar cells with power conversion efficiencies (PCE) of up to 14.9% (certified PCE of 14.33% ± 0.34 at 0.078 cm²). This is the highest PCE to date for a solar cell with 2D‐perovskite layers fabricated by nonspin‐coating method. The PCEs of the cells display no evidence of degradation after storage in a nitrogen glovebox for more than 5 months. 2D‐perovskite layer deposition using a slot‐die process is also investigated for the first time. Perovskite solar cells fabricated using batch slot‐die coating on a glass substrate or R2R slot‐die coating on a flexible substrate produced PCEs of 12.5% and 8.0%, respectively.     

Extremely Flexible Transparent Conducting Electrodes for Organic Devices

Extremely flexible transparent conducting electrodes are developed using a combination of metal‐embedding architecture into plastic substrate and ultrathin transparent electrodes, which leads to highly transparent (optical transmittance ≈93% at a wavelength of 550 nm), highly conducting (sheet resistance ≈13 Ω □^?1), and extremely flexible (bending radius ≈ 200 μm) electrodes. The electrodes are used to fabricate flexible organic solar cells and organic light‐emitting diodes that exhibit performance similar or superior to that of devices fabricated on glass substrates. Moreover, the flexible devices do not show degradation in their performance even after being folded with a radius of ≈200 μm.     

An Efficient Ultra‐Flexible Photo‐Charging System Integrating Organic Photovoltaics and Supercapacitors

Flexible and biocompatible integrated photo‐charging devices consisting of photovoltaic cells and energy storage units can provide an independent power supply for next‐generation wearable electronics or biomedical devices. However, current flexible integrated devices exhibit low total energy conversion and storage efficiency and large device thickness, hindering their applicability towards efficient and stable self‐powered systems. Here, a highly efficient and ultra‐thin photo‐charging device with a total efficiency approaching 6% and a thickness below 50 µm is reported, prepared by integrating 3‐µm‐thick organic photovoltaics on 40 µm‐thick carbon nanotube/polymer‐based supercapacitors. This flexible photo‐charging capacitor delivers much higher performance compared with previous reports by tuning the electrochemical properties of the composite electrodes, which reduce the device thickness to 1/8 while improving the total efficiency by 15%. The devices also exhibit a superior operational stability (over 96% efficiency retention after 100 charge/discharge cycles for one week) and mechanical robustness (94.66% efficiency retention after 5000 times bending at a radius of around 2 mm), providing a high‐power and long‐term operational energy source for flexible and wearable electronics.     

Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency

The tandem concept involves stacking two or more cells with complementary absorption spectra in series or parallel connection, harvesting photons at the highest possible potential. It is strongly suggested that the roll‐to‐roll production of organic solar cells will employ the tandem concept to enhance the power conversion efficiency (PCE). However, due to the undeveloped deposition techniques, the challenges in ink formulation as well as the lack of commercially available high performance active materials, roll‐to‐roll fabrication of highly efficient organic tandem solar cells currently presents a major challenge. The reported high PCE values from lab‐scale spin‐coated devices are, of course, representative, but not helpful for commercialization. Here, organic tandem solar cells with exceptionally high fill factors and PCE values of 7.66% (on glass) and 5.56% (on flexible substrate), which are the highest values for the solution‐processed tandem solar cells fabricated by a mass‐production compatible coating technique under ambient conditions, are demonstrated. To predict the highest possible performance of tandem solar cells, optical simulation based on experimentally feasible values is performed. A maximum PCE of 21% is theoretically achievable for an organic tandem solar cell based on the optimized bandgaps and achieved fill factors.     

Corrugation Architecture Enabled Ultraflexible Wafer‐Scale High‐Efficiency Monocrystalline Silicon Solar Cell

Advanced classes of modern application require new generation of versatile solar cells showcasing extreme mechanical resilience, large‐scale, low cost, and excellent power conversion efficiency. Conventional crystalline silicon‐based solar cells offer one of the most highly efficient power sources, but a key challenge remains to attain mechanical resilience while preserving electrical performance. A complementary metal oxide semiconductor‐based integration strategy where corrugation architecture enables ultraflexible and low‐cost solar cell modules from bulk monocrystalline large‐scale (127 × 127 cm²) silicon solar wafers with a 17% power conversion efficiency. This periodic corrugated array benefits from an interchangeable solar cell segmentation scheme which preserves the active silicon thickness of 240 µm and achieves flexibility via interdigitated back contacts. These cells can reversibly withstand high mechanical stress and can be deformed to zigzag and bifacial modules. These corrugation silicon‐based solar cells offer ultraflexibility with high stability over 1000 bending cycles including convex and concave bending to broaden the application spectrum. Finally, the smallest bending radius of curvature lower than 140 µm of the back contacts is shown that carries the solar cells segments.     

Mechanically Recoverable and Highly Efficient Perovskite Solar Cells: Investigation of Intrinsic Flexibility of Organic–Inorganic Perovskite

Highly efficient solar cells with sustainable performance under severe mechanical deformations are in great demand for future wearable power supply devices. In this regard, numerous studies have progressed to implement flexible architecture to high‐performance devices such as perovskite solar cells. However, the absence of suitable flexible and stretchable materials has been a great obstacle in the replacement of largely utilized transparent conducting oxides that are limited in flexibility. Here, a shape recoverable polymer, Noland Optical Adhesive 63, is utilized as a substrate of perovskite solar cell to enable complete shape recovery of the device upon sub‐millimeter bending radii. The employment of stretchable electrodes prevents mechanical damage of the perovskite layer. Before and after bending at a radius of 1 mm, power conversion efficiency (PCE) is measured to be 10.75% and 10.4%, respectively. Additionally, the shape recoverable device demonstrates a PCE of 6.07% after crumpling. The mechanical properties of all the layers are characterized by nanoindentation. Finite element analysis reveals that the outstanding flexibility of the perovskite layer enables small plastic strain distribution on the deformed device. These results clearly demonstrated that this device has great potential to be utilized in stretchable power supply applications.     

Hybrid Perovskite‐Organic Flexible Tandem Solar Cell Enabling Highly Efficient Electrocatalysis Overall Water Splitting

Perovskite‐organic tandem solar cells are attracting more attention due to their potential for highly efficient and flexible photovoltaic device. In this work, efficient perovskite‐organic monolithic tandem solar cells integrating the wide bandgap perovskite (1.74 eV) and low bandgap organic active PBDB‐T:SN6IC‐4F (1.30 eV) layer, which serve as the top and bottom subcell, respectively, are developed. The resulting perovskite‐organic tandem solar cells with passivated wide‐bandgap perovskite show a remarkable power conversion efficiency (PCE) of 15.13%, with an open‐circuit voltage (V_oc) of 1.85 V, a short‐circuit photocurrent (J_sc) of 11.52 mA cm^?2, and a fill factor (FF) of 70.98%. Thanks to the advantages of low temperature fabrication processes and the flexibility properties of the device, a flexible tandem solar cell which obtain a PCE of 13.61%, with V_oc of 1.80 V, J_sc of 11.07 mA cm^?2, and FF of 68.31% is fabricated. Moreover, to demonstrate the achieved high V_oc in the tandem solar cells for potential applications, a photovoltaic (PV)‐driven electrolysis system combing the tandem solar cell and water splitting electrocatalysis is assembled. The integrated device demonstrates a solar‐to‐hydrogen efficiency of 12.30% and 11.21% for rigid, and flexible perovskite‐organic tandem solar cell based PV‐driven electrolysis systems, respectively.     

Sequential Blade‐Coated Acceptor and Donor Enables Simultaneous Enhancement of Efficiency,Stability, and Mechanical Properties for Organic Solar Cells

As a predominant fabrication method of organic solar cells (OSCs), casting of a bulk heterojunction (BHJ) structure presents overwhelming advantages for achieving higher power conversion efficiency (PCE). However, long‐term stability and mechanical strength are significantly crucial to realize large‐area and flexible devices. Here, controlling blend film morphology is considered as an effective way toward co‐optimizing device performance, stability, and mechanical properties. A PCE of 12.27% for a P‐i‐N‐structured OSC processed by sequential blade casting (SBC) is reported. The device not only outperforms the as‐cast BHJ devices (11.01%), but also shows impressive stability and mechanical properties. The authors corroborate such enhancements with improved vertical phase separation and purer phases toward more efficient transport and collection of charges. Moreover, adaptation of SBC strategy here will result in thermodynamically favorable nanostructures toward more stable film morphology, and thus improving the stability and mechanical properties of the devices. Such co‐optimization of OSCs will pave ways toward realizing the highly efficient, large‐area, flexible devices for future endeavors.     

Advanced Alkali Treatments for High‐Efficiency Cu(In,Ga)Se2 Solar Cells on Flexible Substrates

Flexible, lightweight Cu(In,Ga)Se₂ (CIGS) solar cells grown on polymer substrates are a promising technology with fast growing market prospects. However, power conversion efficiencies of solar cells grown at low temperatures (≈450 °C) remain below the efficiencies of cells grown at high temperature on glass substrates. This contribution discusses the impact on cell efficiency of process improvements of low‐temperature CIGS deposition on flexible polyimide and glass substrates. Different strategies for incorporation of alkali elements into CIGS are evaluated based on a large number of depositions. Postdeposition treatment with heavy alkali (here RbF) enables a thickness reduction of the CdS buffer layer and increases the open‐circuit voltage. Na supply during 3rd stage CIGS deposition positively impacts the cell performance. Coevaporation of heavy alkali (e.g., RbF) during capping layer deposition mitigates the adverse shunting associated with high Cu contents, yielding highest efficiencies with near‐stoichiometric absorber compositions. Furthermore, optimization of the deposition sequence results in absorbers with a 1 µm wide notch region with nearly constant bandgap minimum. The improved processes result in a record cell efficiency of 20.8% for CIGS on flexible substrate.     

Ultrathin,Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

All‐solid‐state batteries are promising candidates for the next‐generation safer batteries. However, a number of obstacles have limited the practical application of all‐solid‐state Li batteries (ASSLBs), such as moderate ionic conductivity at room temperature. Here, unlike most of the previous approaches, superior performances of ASSLBs are achieved by greatly reducing the thickness of the solid‐state electrolyte (SSE), where ionic conductivity is no longer a limiting factor. The ultrathin SSE (7.5 µm) is developed by integrating the low‐cost polyethylene separator with polyethylene oxide (PEO)/Li‐salt (PPL). The ultrathin PPL shortens Li⁺ diffusion time and distance within the electrolyte, and provides sufficient Li⁺ conductance for batteries to operate at room temperature. The robust yet flexible polyethylene offers mechanical support for the soft PEO/Li‐salt, effectively preventing short‐circuits even under mechanical deformation. Various ASSLBs with PPL electrolyte show superior electrochemical performance. An initial capacity of 135 mAh g^?1 at room temperature and the high‐rate capacity up to 10 C at 60 °C can be achieved in LiFePO₄/PPL/Li batteries. The high‐energy‐density sulfur cathode and MoS₂ anode employing PPL electrolyte also realize remarkable performance. Moreover, the ASSLB can be assembled by a facile process, which can be easily scaled up to mass production.     

Ultrathin Nanosheets of Oxo‐functionalized Graphene Inhibit the Ion Migration in Perovskite Solar Cells

Mixed cation/halide perovskites have led to a significant increase in the efficiency and stability of perovskite solar cells. However, mobile ionic defects inevitably exacerbate the photoinduced phase segregation and self‐decomposition of the crystal structure. Herein, ultrathin 2D nanosheets of oxo‐functionalized graphene/dodecylamine (oxo‐G/DA) are used to solve ion migration in cesium (Cs)‐formamidinium (FA)‐methylammonium (MA) triple‐cation‐based perovskites. Based on the superconducting carbon skeleton and functional groups that provide lone pairs of electrons on it, the ultrathin 2D network structure can fit tightly on the crystals and wrap them, isolating them, and thus reducing the migration of ions within the built‐in electric field of the perovskite film. As evidence of the formation of sharp crystals with different orientation within the perovskite film, moiré fringes are observed in transmission electron microscopy. Thus, a champion device with a power conversion efficiency (PCE) of 21.1% (the efficiency distribution is 18.8 ± 1.7%) and a remarkable fill factor of 81%, with reduced hysteresis and improved long‐term stability, is reported. This work provides a simple method for the improvement of the structural stability of perovskite in solar cells.     

Asymmetric Nonfullerene Small Molecule Acceptors for Organic Solar Cells

Symmetry breaking provides a new material design strategy for nonfullerene small molecule acceptors (SMAs). The past 10 years have witnessed significant advances in asymmetric nonfullerene SMAs in organic solar cells (OSCs) with power conversion efficiency (PCE) increasing from ≈1% to ≈14%. In this review, the progress of asymmetric nonfullerene SMAs, including early reports of asymmetric nonfullerene SMAs, asymmetric PDI‐based nonfullerene SMAs, and asymmetric acceptor–donor–acceptor (A–D–A)‐type nonfullerene SMAs, is summarized. The structure–property relationships and the perspectives for future development of asymmetric nonfullerene SMAs are also discussed.     

High Performance Thick‐Film Nonfullerene Organic Solar Cells with Efficiency over 10% and Active Layer Thickness of 600 nm

Developing efficient organic solar cells (OSCs) with relatively thick active layer compatible with the roll to roll large area printing process is an inevitable requirement for the commercialization of this field. However, typical laboratory OSCs generally exhibit active layers with optimized thickness around 100 nm and very low thickness tolerance, which cannot be suitable for roll to roll process. In this work, high performance of thick‐film organic solar cells employing a nonfullerene acceptor F–2Cl and a polymer donor PM6 is demonstrated. High power conversion efficiencies (PCEs) of 13.80% in the inverted structure device and 12.83% in the conventional structure device are achieved under optimized conditions. PCE of 9.03% is obtained for the inverted device with active layer thickness of 500 nm. It is worth noting that the conventional structure device still maintains the PCE of over 10% when the film thickness of the active layer is 600 nm, which is the highest value for the NF‐OSCs with such a large active layer thickness. It is found that the performance difference between the thick active layer films based conventional and inverted devices is attributed to their different vertical phase separation in the active layers.     

Trade‐Off between Trap Filling,Trap Creation,and Charge Recombination Results in Performance Increase at Ultralow Doping Levels in Bulk Heterojunction Solar Cells

Doping of organic bulk heterojunction solar cells has the potential to improve their power conversion efficiency (PCE). Deconvoluting the effect of doping on charge transport, recombination, and energetic disorder remains challenging. It is demonstrated that molecular doping has two competing effects: on one hand, dopant ions create additional traps while on the other hand free dopant‐induced charges fill deep states possibly leading to V _OC and mobility increases. It is shown that molar dopant concentrations as low as a few parts per million can improve the PCE of organic bulk heterojunctions. Higher concentrations degrade the performance of the cells. In doped cells where PCE is observed to increase, such improvement cannot be attributed to better charge transport. Instead, the V _OC increase in unannealed P3HT:PCBM cells upon doping is indeed due to trap filling, while for annealed P3HT:PCBM cells the change in V _OC is related to morphology changes and dopant segregation. In PCDTBT:PC70BM cells, the enhanced PCE upon doping is explained by changes in the thickness of the active layer. This study highlights the complexity of bulk doping in organic solar cells due to the generally low doping efficiency and the constraint on doping concentrations to avoid carrier recombination and adverse morphology changes.     

Side‐Chain Impact on Molecular Orientation of Organic Semiconductor Acceptors: High Performance Nonfullerene Polymer Solar Cells with Thick Active Layer over 400 nm

A new n‐type organic semiconductor (n‐OS) acceptor IDTPC with n‐hexyl side chains is developed. Compared to side chains with 4‐hexylphenyl counterparts (IDTCN), such a design endows the acceptor of IDTPC with higher electron mobility, more ordered face‐on molecular packing, and lower band gap. Therefore, the IDTPC‐based polymer solar cells (PSCs) with a newly developed wide bandgap polymer PTQ10 as donor exhibit the maximum power conversion efficiency (PCE) of 12.2%, a near 65% improvement in PCE relative to the IDTCN‐based control device. Most importantly, the IDTPC‐based device is insensitive to the thickness of the active layer from 70 to 505 nm, which still gives a PCE of 10.0% with the active‐layer thickness of 400 nm. To the best of the authors' knowledge, a PCE of 10.0% is the highest value for the nonfullerene PSCs with an active layer thicker than 400 nm. These results reveal that the blend of PTQ10 and IDTPC exhibits great potential for highly efficient nonfullerene PSCs and large‐area device fabrication.     

Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%

Two novel narrow bandgap π‐conjugated polymers based on naphtho[1,2‐c:5,6‐c′]bis([1,2,5]thiadiazole) (NT) unit are developed, which contain the thiophene or benzodithiophene flanked with alkylthiophene as the electron‐donating segment. Both copolymers exhibit strong aggregations both in solution and as thin films. The resulting copolymers with higher molecular weight show higher photovoltaic performance by virtue of the enhanced short‐circuit current densities and fill factors, which can be attributed to their higher absorptivity and formation of more favorable film morphologies. Polymer solar cells (PSCs) fabricated with the copolymer PNTT achieve remarkable power conversion efficiencies (PCEs) > 11% based on both conventional and inverted structures at the photoactive layer thickness of 280 nm, which is the highest value so far observed from NT‐based copolymers. Of particular interest is that the device performances are insensitive to the thickness of the photoactive layer, for which the PCEs > 10% can be achieved with film thickness ranging from 150 to 660 nm, and the PCE remains >9% at the thickness over 1 µm. These findings demonstrate that these NT‐based copolymers can be promising candidates for the construction of thick film PSCs toward low‐cost roll‐to‐roll processing technology.     

Evidencing Excellent Thermal‐ and Photostability for Single‐Component Organic Solar Cells with Inherently Built‐In Microstructure

Solution‐processed organic solar cells (OSCs) are promising low‐cost, flexible, portable renewable sources for future energy supply. The state‐of‐the‐art OSCs are typically fabricated from a bulk‐heterojunction (BHJ) active layer containing well‐mixed donor and acceptor molecules in the nanometer regime. However, BHJ solar cells suffer from stability problems caused by the severe morphological changes upon thermal or illumination stress. In comparison, single‐component organic solar cells (SCOSCs) based on a double‐cable conjugated polymer with a covalently stabilized microstructure is suggested to be a key strategy for superior long‐term stability. Here, the thermal‐ and photostability of SCOSCs based on a model double‐cable polymer is systematically investigated. It is encouraging to find that under 90 °C & 1 sun illumination, the performance of SCOSCs remains substantially stable. Transport measurements show that charge generation and recombination (lifetime and recombination order) hardly change during the aging process. Particularly, the SCOSCs exhibit ultrahigh long‐term thermal stability with 100% PCE remaining after heating at temperature up to 160 °C for over 400 h, indicating an excellent candidate for extremely rugged applications.     

Progress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites

Owing to their high efficiency, low‐cost solution‐processability, and tunable bandgap, perovskite solar cells (PSCs) made of hybrid organic‐inorganic perovskite (HOIP) thin films are promising top‐cell candidates for integration with bottom‐cells based on Si or other low‐bandgap solar‐cell materials to boost the power conversion efficiency (PCE) beyond the Shockley‐Quiesser (S‐Q) limit. In this review, recent progress in such tandem solar cells based on the emerging PSCs is summarized and reviewed critically. Notable achievements for different tandem solar cell configurations including mechanically‐stacked, optical coupling, and monolithically‐integrated with PSCs as top‐cells are described in detail. Highly‐efficient semitransparent PSC top‐cells with high transmittance in near‐infrared (NIR) region are critical for tandem solar cells. Different types of transparent electrodes with high transmittance and low sheet‐resistance for PSCs are reviewed, which presents a grand challenge for PSCs. The strategies to obtain wide‐bandgap PSCs with good photo‐stability are discussed. The PCE reduction due to reflection loss, parasitic absorption, electrical loss, and current mismatch are analyzed to provide better understanding of the performance of PSC‐based tandem solar cells.     

Highly Efficient Tandem Organic Solar Cell Enabled by Environmentally Friendly Solvent Processed Polymeric Interconnecting Layer

In the field of organic solar cells (OSCs), tandem structure devices exhibit very attractive advantages for improving power conversion efficiency (PCE). In addition to the well researched novel pair of active layers in different subcells, the construction of interconnecting layer (ICL) also plays a critical role in achieving high performance tandem devices. In this work, a new way of achieving environmentally friendly solvent processed polymeric ICL by adopting poly[(9,9‐bis(3′‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐5,5′‐bis(2,2′‐thiophene)‐2,6‐naphthalene‐1,4,5,8‐tetracaboxylic‐N,N′‐di(2‐ethylhexyl)imide] (PNDIT‐F3N) blended with poly(ethyleneimine) (PEI) as the electron transport layer (ETL) and PEDOT:PSS as the hole transport layer is reported. It is found that the modification ability of PNDIT‐F3N on PEDOT can be linearly tuned by the incorporation of PEI, which offers the opportunity to study the charge recombination behavior in ICL. At last, tandem OSC with highest PCE of 12.6% is achieved, which is one of the best tandem OSCs reported till now. These results offer a new selection for constructing efficient ICL in high performance tandem OSCs and guide the way of design new ETL materials for ICL construction, and may even be integrated in future printed flexible large area module device fabrication with the advantages of environmentally friendly solvent processing and thickness insensitivity.     

Morphology Controlling of All‐Inorganic Perovskite at Low Temperature for Efficient Rigid and Flexible Solar Cells

All‐inorganic cesium lead halide (CsPbX₃) perovskites have emerged as promising photovoltaic materials owing to their superior thermal stability compared to traditional organic–inorganic hybrid counterparts. However, the CsPbX₃ perovskites generally need to be prepared at high‐temperature, which restricts their application in multilayer or flexible solar cells. Herein, the formation of CsPbX₃ perovskites at room‐temperature (RT) induced by dimethylsulphoxide (DMSO) coordination is reported. It is further found that a RT solvent (DMSO) annealing (RTSA) treatment is valid to control the perovskite crystallization dynamics, leading to uniform and void‐free films, and consequently a maximum power conversion efficiency (PCE) of 6.4% in the device indium tin oxide (ITO)/NiO _x /RT‐CsPbI₂Br/C₆₀/Bathocuproine (BCP)/Ag, which is, as far as it is known, the first report of RT solution‐processed CsPbX₃‐based perovskite solar cells (PSCs). Moreover, the efficiency can be boosted up to 10.4% by postannealing the RTSA‐treated perovskite film at an optimal temperature of 120 °C. Profiting from the moderate temperature, flexible PSCs are also demonstrated with a maximum PCE of 7.3% for the first time. These results may stimulate further development of all‐inorganic CsPbX₃ perovskites and their application in flexible electronics.