Quantitative trait locus (QTL) analysis of wood quality traits in <Emphasis Type="Italic">Eucalyptus nitens</Emphasis>

To identify the chromosomal regions affecting wood quality traits, we conducted a genome-wide quantitative trait locus (QTL) analysis of wood quality traits in Eucalyptus nitens. This information is important to exploit the full potential of the impending Eucalyptus genome sequence. A three generational mapping population consisting of 296 progeny trees was used to identify QTL associated with several wood quality traits in E. nitens. Thirty-six QTL positions for cellulose content, pulp yield, lignin content, density, and microfibril angle (MFA) were identified across different linkage groups. On linkage groups (LG)2 and 8, cellulose QTL cluster with pulp yield and extractives QTL while on LG4 and 10 cellulose and pulp yield QTLs cluster together. Similarly, on LG4, 5, and 6 QTL for lignin traits were clustered together. At two positions, QTL for MFA, a physical trait related to wood stiffness, were clustered with QTL for lignin traits. Several cell wall candidate genes were co-located to QTL positions affecting different traits. Comparative QTL analysis with Eucalyptus globulus revealed two common QTL regions for cellulose and pulp yield. The QTL positions identified in this study provide a resource for identifying wood quality genes using the impending Eucalyptus genome sequence. Candidate genes identified in this study through co-location to QTL regions may be useful in association studies.     

Mechanical,chemical and X-ray analysis of wood in the two tropical lianas<Emphasis Type="Italic"> Bauhinia guianensis</Emphasis> and<Emphasis Type="Italic"> Condylocarpon guianense</Emphasis>: variations during ontogeny

Mechanical and chemical properties as well as microfibril angles of wood tissues from different ontogenetic stages are determined for the neotropical lianas Bauhinia guianensis and Condylocarpon guianense. The mechanical properties include the elastic moduli under bending and under dynamic torsion. The chemical analyses cover (i) the content of cellulose, lignin and hemicelluloses fractions, (ii) the monomeric composition of the uncondensed lignin, and (iii) the composition of the hemicelluloses with respect to neutral monosaccharides. By comparing the wood properties of these lianas with the corresponding properties of wood from self-supporting deciduous trees, common characteristics and differences are revealed. Additionally, the changes in the lignin and polysaccharides fractions as well as the variations in microfibril orientation that occur during ontogeny of the two liana species are discussed with regard to their implications for the mechanical properties of wood.     

Genetic variation of wood chemical traits and association with underlying genes in Eucalyptus urophylla

We developed a quantitative and association genetic study with Eucalyptus urophylla using a progeny trial. Based on a sample of 831 trees distributed in 84 half-sib families whose wood was phenotyped by near-infrared spectroscopy, the results showed that traits related to lignin, cellulose, and wood extractives presented significant additive genetic variability with moderate to high narrow sense heritability (h ²?=?0.28 to 0.93). Genetic correlations varied with high standard error and showed low to moderate values. Using three cellulose synthase genes (EuCesA1, EuCesA2, and EuCesA3) and three candidate genes involved in the lignin pathway (EuC4H1, EuC4H2, and EuCAD2), an association study was performed for each of the gene action models (co-dominant, recessive, and dominant) using two methods. Firstly, single-marker association tests were done and 539 tests (49 single nucleotide polymorphisms (SNPs)?×?11 traits) were analyzed. After Bonferroni correction with a significance level of P?=?0.00102, only four SNPs presented significant association with syringyl and syringyl-to-guaiacyl ratio with an adjusted coefficient of determination varying between 2.6 and 4.4 %. Secondly, a model selection method, the backward approach, was implemented. Similar SNPs were detected by both the backward selection and the individual marker approaches. However, the latter detected new associations with other traits, genes, and SNPs and improved the quality of the model as shown by the BIC criteria and the higher adjusted determination coefficient (1.5 to 8.3 %). Our results reveal that cellulose genes can be associated with lignin traits (syringyl-to-guaiacyl ratio) and stress the possible pleiotropic effect of some genes.     

Metabolite profiling of Douglas-fir (Pseudotsuga menziesii) field trials reveals strong environmental and weak genetic variation

The primary objective of this study was to assess metabolomics for its capacity to discern biological variation among 10 full-sib families of a Douglas-fir tree breeding population, replicated on two sites. The differential accumulation of small metabolites in developing xylem was examined through metabolite profiles (139 metabolites common to 181 individual trees) generated by gas chromatography mass spectrometry and a series of statistical analyses that incorporated family, site, and tree growth and quantitative phenotypic wood traits (wood density, microfibril angle, wood chemistry and fiber morphology). Multivariate discriminant, canonical discriminant and factor analyses and broad-sense heritabilities revealed that metabolic and phenotypic traits alike were strongly related to site, while similar associations relating to genetic (family) structure were weak in comparison. Canonical correlation analysis subsequently identified correlations between specific phenotypic traits (i.e. tree growth, fibre morphology and wood chemistry) and metabolic traits (i.e. carbohydrate and lignin biosynthetic metabolites), demonstrating a coherent relationship between genetics, metabolism, environmental and phenotypic expression in wood-forming tissue. The association between cambial metabolites and tree phenotype, as revealed by metabolite profiling, demonstrates the value of metabolomics for systems biology approaches to understanding tree growth and secondary cell wall biosynthesis in plants.     

In situ wood quality assessment in Douglas-fir

The genetic control and phenotypic and genotypic correlations among wood density, modulus of elasticity, height, diameter, and volume were assessed using 967 trees representing 20 unrelated 32-year-old coastal Douglas-fir full-sib families growing on four (spaced and pruned vs. control) comparable test sites. Generally, no significant differences were observed between treatments, indicating their limited effect at assessment time. Family effect did not differ for the growth traits; however, significant differences were observed for wood density and both in situ methods (drilling resistance and acoustic velocity). Growth and wood quality attributes, individually, produced high and positive phenotypic and genetic correlations; however, high and negative correlations were observed between individual variables belonging to the two suites of attributes. Individual tree heritabilities were low for growth (0.04 to 0.08) and modest to high for wood quality attributes (0.14 to 0.68). The observed heritabilities and phenotypic and genotypic correlations imply modest to strong genetic control; however, they operated in opposing direction. The significant and consistent genetic correlations between the in situ methods and wood density and stiffness support their use as a non-destructive and economic assessment approach. The reliability of the in situ assessments was verified through cumulative pith-to-bark wood density assessment, resulting in inconsistent genetic and phenotypic correlations for early growth years. These latter findings imply that caution should be used in employing these in situ techniques as early screening tools in breeding programs.     

Genetic variation in Eucalyptus nitens pulpwood and wood shrinkage traits

Eucalyptus nitens plantations are generally established for pulpwood production but an increasing area is being managed for solid wood. Genetic variation in, and correlations among, three Kraft pulpwood traits (diameter at breast height, basic density and near-infrared-predicted cellulose content) and three 12-mm wood-core shrinkage traits (recoverable collapse, net shrinkage and gross shrinkage) were examined, utilising data from two 9-year-old first-generation progeny trials in Tasmania. These trials contained approximately 400 open-pollinated families (over 100 of which were sampled for wood properties) representing three central-Victorian E. nitens races. Significant genetic variation at the race and/or within-race level was identified in all traits. Within races, relative levels of additive genetic variation were higher for shrinkage traits, although narrow-sense heritabilities were lower and the expression of genetic variation less stable across sites than for other wood property traits. Heterogeneous intertrait genetic correlations were identified across sites between growth and some wood property traits. However, where significant, genetic correlations indicated that within-race selection for growth would adversely affect core basic density and all core shrinkage traits. Furthermore, results based on cores suggested that within-race selection for higher basic density would favourably impact on cellulose content and collapse but selection for either higher basic density or cellulose content would adversely affect net shrinkage. Most within-race genetic variation in gross shrinkage appeared to be due to genetic variation in collapse. The implications of these results for sawn timber breeding will depend on the strength of genetic correlations between core traits and rotation-age objective traits and objective trait economic weights.     

Distribution of lignin and its coniferyl alcohol and coniferyl aldehyde groups in Picea abies and Pinus sylvestris as observed by Raman imaging

Wood cell wall consists of several structural components, such as cellulose, hemicelluloses and lignin, whose concentrations vary throughout the cell wall. It is a composite where semicrystalline cellulose fibrils, acting as reinforcement, are bound together by amorphous hemicelluloses and lignin matrix. Understanding the distribution of these components and their functions within the cell wall can provide useful information on the biosynthesis of trees. Raman imaging enables us to study chemistry of cell wall without altering the structure by staining the sample or fractionating it. Raman imaging has been used to analyze distributions of lignin and cellulose, as well as the functional groups of lignin in wood. In our study, we observed the distribution of cellulose and lignin, as well as the amount of coniferyl alcohol and aldehyde groups compared to the total amount of lignin in pine (Pinus sylvestris) and spruce (Picea abies) wood samples. No significant differences could be seen in lignin and cellulose distribution between these samples, while clear distinction was observed in the distribution of coniferyl alcohols and coniferyl aldehyde in them. These results could provide valuable insight on how two similar wood species control biosynthesis of lignin differently during the differentiation of cell wall.     

Resistance of Scots pine wood to Brown-rot fungi after long-term forest fertilization

The susceptibility of Scots pine (Pinus sylvestris L.) sap- and heartwood against the wood decaying brown-rot fungus (Coniophora puteana) was investigated after long-term forest fertilization at three different sites in central Finland. Different wood properties: wood extractives, wood chemistry, and wood anatomy were used to explain sap- and heartwood decay. Scots pine sapwood was more susceptible to decay than its heartwood. In one site, sapwood seemed to be more resistant to wood decay after forest fertilization whereas the susceptibility of heartwood increased. Significant changes in the sapwood chemistry were found between treatment and sites, however, no relationship between wood chemistry and wood decay was observed in the factor analysis. The results of this study show that there was an inconsistent relationship between decay susceptibility and fertilization and the measured physical and chemical attributes of the wood were not consistently correlated with the decay rate.     

Natural durability of selected larch and Scots pine heartwoods in laboratory and field tests

The aim of this study was to compare natural durability of Siberian larch heartwood grown in Siberia and Sweden as well as European larch and Scots pine heartwood grown in Sweden. The study was based on standard in- and above ground tests lasting 12 years but laboratory decay tests with white and brown rot fungi was also included. Field test results showed that Siberian larch heartwood from Siberia was the most durable among the studied heartwoods with a decay index of 60 after 12 years in Simlångsdalen (Sweden), while European larch heartwood grown in Sweden, was decayed to failure before the end of the test. Scots pine heartwood was found to perform similarly to Siberian larch from Siberia. No relationship could be established between natural durability of examined heartwoods and their water absorption behavior; however, strong correlation to the total amount of extractives was observed. Scots pine and Siberian larch heartwood from Siberia had 12.7 and 19.6% total extractives content respectively but the extractives composition differs. The study revealed also that lignin and monosaccharide content could not explain the variations in decay resistance of the studied heartwoods. No similarities in the natural durability revealed by laboratory and field tests were observed.     

Characterisation of the initial degradation stage of Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) sapwood after attack by brown-rot fungus <Emphasis Type="Italic">Coniophora puteana</Emphasis>

In our study, early period degradation (10 days) of Scots pine (Pinus sylvestris L.) sapwood by the brown-rot fungus Coniophora puteana (Schum.: Fr.) Karst. (BAM Ebw.15) was followed at the wood chemical composition and ultrastructurelevel, and highlighted the generation of reactive oxygen species (ROS). An advanced decay period of 50 days was chosen for comparison of the degradation dynamics. Scanning UV microspectrophotometry (UMSP) analyses of lignin distribution in wood cells revealed that the linkages of lignin and polysaccharides were already disrupted in the early period of fungal attack. An increase in the lignin absorption A₂₈₀ value from 0.24 (control) to 0.44 in decayed wood was attributed to its oxidative modification which has been proposed to be generated by Fenton reaction derived ROS. The wood weight loss in the initial degradation period was 2%, whilst cellulose and lignin content decreased by 6.7% and 1%, respectively. Lignin methoxyl (–OCH₃) content decreased from 15.1% (control) to 14.2% in decayed wood. Diffuse reflectance Fourier-transform infrared (DRIFT) spectroscopy corroborated the moderate loss in the hemicellulose and lignin degradation accompanying degradation. Electron paramagnetic resonance spectra and spin trapping confirmed the generation of ROS, such as hydroxyl radicals (HO^∙), in the early wood degradation period. Our results showed that irreversible changes in wood structure started immediately after wood colonisation by fungal hyphae and the results generated here will assist in the understanding of the biochemical mechanisms of wood biodegradation by brown-rot fungi with the ultimate aim of developing novel wood protection methods.     

What are the consequences of growth selection on wood density in the French maritime pine breeding programme?

Volume and stem straightness were the main selection criteria for the first two generations of the French maritime pine (Pinus pinaster Ait.) breeding programme. In this article, we investigate the consequences of this selection on wood quality. Wood density, as a predictor of wood quality, is studied both in the breeding populations and in commercial varieties. Phenotypic and genetic correlations between wood density and growth traits are investigated in successive breeding populations with three genetic field experiments of respectively 30, 29 and 12 years old. Correlation estimates were either slightly negative or non-significantly different from zero depending on the test considered. Consequently, a low impact of growth selection on wood quality should be expected in improved seed sources. However, we observed a significant wood density decrease in two improved varieties as compared to unimproved seed sources at age 15. In addition to this first effect on wood density, growth improvement is also expected to reduce the rotation age and thus increase the proportion of juvenile wood, which is known as having a lower density than mature wood. This change was studied and quantified using a growth model. Finally, a wood density decrease reaching up to 6% was predicted in the improved varieties compared to unimproved material, when both the observed decrease in wood density and the predicted increase in juvenile wood proportion were taken into account. Implications for the breeding programme were considered.     

Chemical factors affecting the brown-rot decay resistance of Scots pine heartwood

The cell wall chemistry (amount of hemicellulose, f-cellulose, and total lignin) and the concentration of extractives (total acetone-soluble extractives, resin acids, pinosylvins and the total phenolics quantified as tannin acid equivalents) were studied in brown-rot resistant and susceptible juvenile heartwood of Scots pine (Pinus sylvestris L.). The study material consisted of a total of 18 trees from two 34-year-old progeny trials at Korpilahti and Kerimäki. The trees were selected from among 783 trees whose decay rate had previously been screened in a laboratory test using a brown-rot fungus, Coniophora puteana. Samples from neither location showed any significant difference in the concentration (mg/cm³) of hemicellulose, f-cellulose and total lignin between the decay resistant and susceptible trees. At both locations only the concentration of total phenolics was higher in the decay-resistant heartwood than in the decay-susceptible heartwood. At Korpilahti, the amount of acetone-soluble extractives and the concentration of pinosylvin and its derivatives were higher in the resistant than in the susceptible trees.     

Patterns of genetic parameters for height in field genetic tests of Picea abies and Pinus sylvestris in Sweden

We reviewed the genetic parameter estimates carried out from 1992 to 2006 for height increment in genetic tests of Norway spruce and Scots pine, to describe patterns of genetic variation, heritability, and genetic correlations. The material included seedling and clonal tests in Sweden, aged between 5 and 20 years. Multiple regression was used to explore relationships between parameter values and test environments. Results showed moderate narrow-sense heritabilities ([^(h)]² {\hat{h}^2} : mean =0.29 in Norway spruce; mean =0.23 in Scots pine) that decreased with test site latitude for both species. In Norway spruce, [^(h)]² {\hat{h}^2} increased with better growth and decreased with tree age, while for Scots pine, [^(h)]² {\hat{h}^2} increased with tree age and southward transfer. The additive genetic coefficient of variation (; mean 15%), in Norway spruce, decreased with growth as well as site latitude. in Scots pine (mean =8.5%) increased with southward transfer and more southerly test latitude. Additive and genotypic within-site genetic age-age correlations in Norway spruce were high, with mean r _A and r _G of 0.92 and 0.85, respectively. Corresponding across-sites estimates were on average lower. Genetic parameters were better expressed on favorable sites, at younger ages in Norway spruce and at older ages in Scots pine. The results imply that gain calculations should be based on different parameters in the two species. For maximizing genetic gain in the Swedish breeding program, testing times could be shorter for Norway spruce than for Scots pine. The investigation showed a large variation in parameter estimates from different field experiments, highlighting the importance of testing over multiple sites.     

An evaluation of the potential of Acacia dealbata as raw material for bioethanol production

In this work, the potential of Acacia dealbata as raw material for ethanol production was evaluated, as well as its composition with regard to cellulose, hemicelluloses, lignin, extractives and ash. The tree samples were subjected to several dilute acid pretreatments using a combined severity parameter ranging from 0.7 to 3.7. The highest ethanol concentration obtained was 10.31 g ethanol/L within 24 h by using a separate hydrolysis and fermentation of the water insoluble fraction after pretreatment at 180 °C with 0.8% of sulfuric acid for 15 min. With simultaneous saccharification and fermentation, results obtained for the washed solids of water insoluble fraction were better than those obtained with the whole slurry.     

Wood anatomy and carbon‐isotope discrimination support long‐term hydraulic deterioration as a major cause of drought‐induced dieback

Hydraulic impairment due to xylem embolism and carbon starvation are the two proposed mechanisms explaining drought‐induced forest dieback and tree death. Here, we evaluate the relative role played by these two mechanisms in the long‐term by quantifying wood‐anatomical traits (tracheid size and area of parenchyma rays) and estimating the intrinsic water‐use efficiency (iWUE) from carbon isotopic discrimination. We selected silver fir and Scots pine stands in NE Spain with ongoing dieback processes and compared trees showing contrasting vigour (declining vs nondeclining trees). In both species earlywood tracheids in declining trees showed smaller lumen area with thicker cell wall, inducing a lower theoretical hydraulic conductivity. Parenchyma ray area was similar between the two vigour classes. Wet spring and summer conditions promoted the formation of larger lumen areas, particularly in the case of nondeclining trees. Declining silver firs presented a lower iWUE than conspecific nondeclining trees, but the reverse pattern was observed in Scots pine. The described patterns in wood anatomical traits and iWUE are coherent with a long‐lasting deterioration of the hydraulic system in declining trees prior to their dieback. Retrospective quantifications of lumen area permit to forecast dieback in declining trees 2–5 decades before growth decline started. Wood anatomical traits provide a robust tool to reconstruct the long‐term capacity of trees to withstand drought‐induced dieback.     

Variation of cellulose microfibril angles in softwoods and hardwoods-a possible strategy of mechanical optimization

Position-resolved small-angle X-ray scattering was used to investigate the nanostructure of the wood cell wall in two softwood species (Norwegian spruce and Scots pine) and two hardwood species (pedunculate oak and copper beech). The tilt angle of the cellulose fibrils in the wood cell wall versus the longitudinal cell axis (microfibril angle) was systematically studied over a wide range of annual rings in each tree. The measured angles were correlated with the distance from the pith and the results were compared. The microfibril angle was found to decrease from pith to bark in all four trees, but was generally higher in the softwood than in the hardwood. In Norwegian spruce, the microfibril angles were higher in late wood than in early wood; in Scots pine the opposite was observed. In pedunculate oak and copper beech, low angles were found in the major part of the stem, except for the very first annual rings in pedunculate oak. The results are interpreted in terms of mechanical optimization. An attempt was made to give a quantitative estimation for the mechanical constraints imposed on a tree of given dimensions and to establish a model that could explain the general decrease of microfibril angles from pith to bark.     

Studies of crystallinity of Scots pine and Norway spruce cellulose

The variation in the mass fraction of crystalline cellulose (crystallinity of wood), the intrinsic crystallinity of cellulose, and the thickness of cellulose crystallites in early wood of Norway spruce [Picea abies (L.) Karst.], and Scots pine (Pinus sylvestris L.) grown in Finland were studied using wide angle X-ray scattering and nuclear magnetic resonance spectroscopy. The mass fraction of crystalline cellulose in wood increased slightly with the distance from the pith and was about 30±4% in mature wood of both species. The crystallinity of cellulose and the thickness of cellulose crystallites were almost constant for both species. The crystallinity of cellulose was 52±3% for both species and the average thickness of the cellulose crystallites was 32±1 Å and 31±1 Å for Norway spruce and Scots pine, respectively. The mass fraction of cellulose in wood, calculated from the crystallinity values, increased with the distance from the pith for both species.     

QTL Mapping of Wood FT-IR Chemotypes Shows Promise for Improving Biofuel Potential in Short Rotation Coppice Willow (<Emphasis Type="Italic">Salix</Emphasis> spp.)

An increasing interest to convert lignocellulosic biomass into biofuels has highlighted the potential of using willows for this purpose, due to its fast growth in short rotation coppice systems. Here, we use a mapping population of 463 individuals of a cross between Salix viminalis and S. viminalis × S. schwerinii to investigate the genetic background of different wood chemical traits, information of importance for breeding towards different uses of wood. Furthermore, using a subset of the mapping population, the correlation between biogas production and chemical traits was investigated. The phenotyping of wood was carried by Furrier-transformed-Infrared spectrometry (FT-IR) and water content analysis. Quantitative trait loci (QTLs) analysis was used to identify regions in the genome of importance for the phenotypic variation of these chemical traits. We found 27 QTLs for various traits. On linkage group (LG) VI-1, QTLs for signals assigned to G-lignin, lignin, and the S/G ratio were collocated and on LG XIV we found a cluster of QTLs representing signals assigned to lignin, cellulose, hemicellulose, and water. The QTLs explained from 3.4 to 6.9% of the phenotypic variation indicating a quantitative genetic background where many genes influence the traits. For the biogas production, a positive and negative correlation was seen with the signals assigned to acetyl and lignin, respectively. This study represents a first step in the understanding of the genetic background of wood chemical traits for willows, information needed for complementary studies, mapping of important genes, and for breeding of varieties for biofuel production purposes.     

Size-exclusion chromatography of enzymatically treated cellulose and related polysaccharides: a review

Size-exclusion chromatography (SEC) of wood pulp polysaccharides (cellulose and hemicelluloses) has become widely used for the analysis of these polymers, including monitoring of transformations occurring under various chemical and biological processes. The present review provides information on the different procedures and methodologies developed for the characterization of molecular mass distribution (MMD) and chemical composition of cellulose and hemicelluloses by SEC. This paper also includes the significant results obtained in the characterization of enzymatically treated wood polysaccharides. Conventional SEC with double detection (refractometric and UV), "hyphenated" with a fractional dissolution, was demonstrated to be an efficient method for simultaneous determination of MMD and chemical heterogeneity.