Heterogeneous Catalysts with Well‐Defined Active Metal Sites toward CO2 Electrocatalytic Reduction

The global atmospheric CO₂ concentration reached 147% of pre‐industrial levels in 2019, and is still increasing with an accelerated rate. A series of methods have been developed to convert CO₂ to other non‐greenhouse molecules. Elelctrocatalytic CO₂ reduction reaction (CO2RR) is one of the promising methods, since it could support renewable energy. Optimizing the CO2RR system requires finding highly efficient catalysts, as well as electrolysis systems. In this essay, the development of promising heterogeneous catalysts with well‐defined active metal sites is discussed. These catalysts could be prepared by immobilizing metal cations onto chemically well‐defined substrates, such as metal‐organic frameworks, covalent‐organic frameworks, polyoxometalates, or immobilizing well‐defined molecular catalysts on conducting substrates. A clear perspective on the catalyst's structures contributes to the understanding of structure‐reactivity correlations, which could, in turn, shed light on designing better catalysts. Some methods to assist the electrocatalysis process, such as coupling with solar or heat energy, are also briefly discussed.     

Electrocatalytic Reduction of Gaseous CO2 to CO on Sn/Cu‐Nanofiber‐Based Gas Diffusion Electrodes

Earth‐abundant Sn/Cu catalysts are highly selective for the electrocatalytic reduction of CO₂ to CO in aqueous electrolytes. However, CO₂ mass transport limitations, resulting from the low solubility of CO₂ in water, so far limit the CO partial current density for Sn/Cu catalysts to about 10 mA cm^?2. Here, a freestanding gas diffusion electrode design based on Sn‐decorated Cu‐coated electrospun polyvinylidene fluoride nanofibers is demonstrated. The use of gaseous CO₂ as a feedstock alleviates mass transport limitations, resulting in high CO partial current densities above 100 mA cm^?2, while maintaining high CO faradaic efficiencies above 80%. These results represent an important step toward an economically viable pathway to CO₂ reduction.     

A Water‐Soluble Cu Complex as Molecular Catalyst for Electrocatalytic CO2 Reduction on Graphene‐Based Electrodes

A structurally simple molecular 1,10‐phenanthroline‐Cu complex on a mesostructured graphene matrix that can be active and selective toward CO₂ reduction over H₂ evolution in an aqueous solution is reported. The active sites consist of Cu(I) center in a distorted trigonal bipyramidal geometry, which enables the adsorption of CO₂ with η¹‐COO‐like configuration to commence the catalysis, with a turnover frequency of ≈45 s^?1 at ?1 V versus reversible hydrogen electrode. Using in situ infrared spectroelectrochemical investigation, it is demonstrated that the Cu complex can be reversibly heterogenized near the graphene surface via potential control. An increase of electron density in the complex is observed as a result of the interaction from the electric field, which further tunes the electron distribution in the neighboring CO₂. It is also found that the mesostructure of graphene matrix favored CO₂ reduction on the Cu center over hydrogen evolution by limiting mass transport from the bulk solution to the electrode surface.     

A Disquisition on the Active Sites of Heterogeneous Catalysts for Electrochemical Reduction of CO2 to Value‐Added Chemicals and Fuel

Renewable‐electricity‐powered electrocatalytic CO₂ reduction reactions (CO₂RR) have been identified as an emerging technology to address the issue of rising CO₂ emissions in the atmosphere. While the CO₂RR has been demonstrated to be technically feasible, further improvements in catalyst performance through active sites engineering are a prerequisite to accelerate its commercial feasibility for utilization in large CO₂‐emitting industrial sources. Over the years, the improved understanding of the interaction of CO₂ with the active sites has allowed superior catalyst design and subsequent attainment of prominent CO₂RR activity in literature. This review tracks the evolution of the understanding of CO₂RR active sites on different electrocatalysts such as metals, metal‐oxides, single atoms, metal‐carbon, and subsequently metal‐free carbon‐based catalysts. Despite the tremendous research efforts in the field, many scientific questions on the role of various active sites in governing CO₂RR activity, selectivity, stability, and pathways are still unanswered. These gaps in knowledge are highlighted and a discussion is set forth on the merits of utilizing advanced in‐situ and operando characterization techniques and machine learning (ML). Using this technique, the underlying mechanisms can be discerned, and as a result new strategies for designing active sites may be uncovered. Finally, this review advocates an interdisciplinary approach to discover and design CO₂RR active sites (rather than focusing merely on catalyst activity) in a bid to stimulate practical research for industrial application.     

Electrochemical CO2 Reduction with Atomic Iron‐Dispersed on Nitrogen‐Doped Graphene

Electrochemical reduction of CO₂ provides an opportunity to reach a carbon‐neutral energy recycling regime, in which CO₂ emissions from fuel use are collected and converted back to fuels. The reduction of CO₂ to CO is the first step toward the synthesis of more complex carbon‐based fuels and chemicals. Therefore, understanding this step is crucial for the development of high‐performance electrocatalyst for CO₂ conversion to higher order products such as hydrocarbons. Here, atomic iron dispersed on nitrogen‐doped graphene (Fe/NG) is synthesized as an efficient electrocatalyst for CO₂ reduction to CO. Fe/NG has a low reduction overpotential with high Faradic efficiency up to 80%. The existence of nitrogen‐confined atomic Fe moieties on the nitrogen‐doped graphene layer is confirmed by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure analysis. The Fe/NG catalysts provide an ideal platform for comparative studies of the effect of the catalytic center on the electrocatalytic performance. The CO₂ reduction reaction mechanism on atomic Fe surrounded by four N atoms (Fe–N₄) embedded in nitrogen‐doped graphene is further investigated through density functional theory calculations, revealing a possible promotional effect of nitrogen doping on graphene.     

Paramelaconite‐Enriched Copper‐Based Material as an Efficient and Robust Catalyst for Electrochemical Carbon Dioxide Reduction

A copper‐oxide‐based catalyst enriched with paramelaconite (Cu₄O₃) is presented and investigated as an electrocatalyst for facilitating electroreduction of CO₂ to ethylene and other hydrocarbons. Cu₄O₃ is a member of the copper‐oxide family and possesses an intriguing mixed‐valance nature, incorporating an equal number of Cu⁺ and Cu²⁺ ions in its crystal structure. The material is synthesized using a solvothermal synthesis route and its structure is confirmed via powder X‐ray diffraction, transmission electron microscope based selected area electron diffraction, and X‐ray photoelectron spectroscopy. A flow reactor equipped with a gas diffusion electrode is utilized to test a copper‐based catalyst enriched with the Cu₄O₃ phase under CO₂ reduction conditions. The Cu₄O₃‐rich catalyst (PrC) shows a Faradaic efficiency for ethylene over 40% at 400 mA cm^?2. At ?0.64 versus reversible hydrogen electrode, the highest C₂₊/C₁ product ratio of 4.8 is achieved, with C₂₊ Faradaic efficiency over 61%. Additionally, the catalyst exhibits a stable performance for 24 h at a constant current density of 200 mA cm^?2.     

Oxygen Reduction Reactions on Single‐ or Few‐Atom Discrete Active Sites for Heterogeneous Catalysis

The oxygen reduction reaction (ORR) is of great importance in energy‐converting processes such as fuel cells and in metal–air batteries and is vital to facilitate the transition toward a nonfossil dependent society. The ORR has been associated with expensive noble metal catalysts that facilitate the O₂ adsorption, dissociation, and subsequent electron transfer. Single‐ or few‐atom motifs based on earth‐abundant transition metals, such as Fe, Co, and Mo, combined with nonmetallic elements, such as P, S, and N, embedded in a carbon‐based matrix represent one of the most promising alternatives. Often these are referred to as single atom catalysts; however, the coordination number of the metal atom as well as the type and nearest neighbor configuration has a strong influence on the function of the active sites, and a more adequate term to describe them is metal‐coordinated motifs. Despite intense research, their function and catalytic mechanism still puzzle researchers. They are not molecular systems with discrete energy states; neither can they fully be described by theories that are adapted for heterogeneous bulk catalysts. Here, recent results on single‐ and few‐atom electrocatalyst motifs are reviewed with an emphasis on reports discussing the function and the mechanism of the active sites.     

Effect of CO2 on uninfected Sf‐9 cell growth and metabolism

A problem in the mass production of recombinant proteins and biopesticides using insect cell culture is CO₂ accumulation. This research investigated the effect of elevated CO₂ concentration on insect cell growth and metabolism. Spodoptera frugiperda Sf‐9 insect cells were grown at 20% air saturation, 27^°C, and a pH of 6.2. The cells were exposed to a constant CO₂ concentration by purging the medium with CO₂ and the headspace with air. The population doubling time (PDT) of Sf‐9 cells increased with increasing CO₂ concentration. Specifically, the PDT for 0‐37, 73, 147, 183, and 220 mm Hg CO₂ concentrations were 23.2 ± 6.7, 32.4 ± 7.2, 38.1 ± 13.3, 42.9 ± 5.4, and 69.3 ± 35.9 h (n = 3 or 4, 95% confidence level), respectively. The viability of cells in all experiments was above 90%, i.e., while increased CO₂ concentrations inhibited cell growth, it did not affect cell viability. The osmolality for all bioreactor experiments was observed to be 300–360 mOsm/kg, a range that is known to have a negligible effect on insect cell culture. Elevated CO₂ concentration did not significantly alter the cell specific glucose consumption rate (2.5–3.2 × 10^?17 mol/cell s), but slightly increased the specific lactate production rate from ?3.0 × 10^?19 to 10.2 × 10^?19 mol/cell s. Oxidative stress did not contribute to CO₂ inhibition in uninfected Sf‐9 cells as no significant increase in the levels of lipid hydroperoxide and protein carbonyl concentrations was discovered at elevated CO₂ concentration. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:465–469, 2016     

Design of Carbon Nanotube‐Based Gas‐Diffusion Cathode for O2 Reduction by Multicopper Oxidases

Multicopper oxidases, such as laccase or bilirubin oxidase, are known to reduce molecular oxygen at very high redox potentials, which makes them attractive biocatalysts for enzymatic cathodes in biological fuel cells. By designing an enzymatic gas‐diffusion electrode, molecular oxygen can be supplied through the gaseous phase, avoiding solubility and diffusion limitations typically associated with liquid electrolytes. In doing so, the current density of enzymatic cathodes can theoretically be enhanced. This publication presents a material study of carbon/Teflon composites that aim to optimize the functionality of the gas‐diffusion and catalytic layers for application in enzymatic systems. The modification of the catalytic layer with multiwalled carbon nanotubes, for example, creates the basis for stronger π–π stacking interactions through tethered enzymatic linkers, such as pyrenes or perylene derivates. Cyclic voltammograms show the effective direct electron contact of laccase with carbon nanotube‐modified electrodes via tethered crosslinking molecules as a model system. The polarization behavior of laccase‐modified gas‐diffusion electrodes reveals open‐circuit potentials of +550 mV (versus Ag/AgCl) and current densities approaching 0.5 mA cm² (at zero potential) in air‐breathing mode.     

Terrestrial biosphere model performance for inter‐annual variability of land‐atmosphere CO2 exchange

Interannual variability in biosphere‐atmosphere exchange of CO₂ is driven by a diverse range of biotic and abiotic factors. Replicating this variability thus represents the ‘acid test’ for terrestrial biosphere models. Although such models are commonly used to project responses to both normal and anomalous variability in climate, they are rarely tested explicitly against inter‐annual variability in observations. Herein, using standardized data from the North American Carbon Program, we assess the performance of 16 terrestrial biosphere models and 3 remote sensing products against long‐term measurements of biosphere‐atmosphere CO₂ exchange made with eddy‐covariance flux towers at 11 forested sites in North America. Instead of focusing on model‐data agreement we take a systematic, variability‐oriented approach and show that although the models tend to reproduce the mean magnitude of the observed annual flux variability, they fail to reproduce the timing. Large biases in modeled annual means are evident for all models. Observed interannual variability is found to commonly be on the order of magnitude of the mean fluxes. None of the models consistently reproduce observed interannual variability within measurement uncertainty. Underrepresentation of variability in spring phenology, soil thaw and snowpack melting, and difficulties in reproducing the lagged response to extreme climatic events are identified as systematic errors, common to all models included in this study.     

Definitive Structural Identification toward Molecule‐Type Sites within 1D and 2D Carbon‐Based Catalysts

Developing facile preparation routes and atomic‐level characterization methods for single‐atom catalysts is highly desirable but still challenging. Herein, a general strategy is proposed to construct transition metal single atoms within 1D and 2D carbon supports. The carbon supports, typically graphene and carbon nanotubes, are coated with various transition metal‐containing bimetal hydroxides, followed by polydopamine coating and high‐temperature pyrolysis. X‐ray absorption fine structure spectroscopy measurements and simulations efficiently indicate that single atoms (Co, Fe, or Cu) are captured within the applied carbon supports, distinctively forming exclusive molecule‐type sites. As a proof‐of‐concept application, the obtained catalysts exhibit remarkable performance for electrochemical oxygen reduction reaction, even surpassing commercial Pt/C catalyst. The developed versatile route opens up new avenues for the design of carbon‐based catalysts with definite molecular active sites. The atomic‐level structural identifications provide significant guidance for mechanistic studies toward single‐atom catalysts.     

High‐Sensitivity C‐Reactive Protein in Japanese Patients with Type 2 Diabetes

Objective: To assess the relationship between high‐sensitivity (HS) C‐reactive protein (CRP) and metabolic syndrome (MetS) or atherosclerosis and to assess effects of strict metabolic control on the degree of inflammation and MetS in patients with type 2 diabetes. Research Methods and Procedures: Four hundred thirteen patients with diabetes were enrolled in the cross‐sectional study. Of these 413 patients, 161 patients were further admitted for 2.4 ± 0.4 weeks (mean ± SD) to investigate the change in HS‐CRP or other parameters under strict metabolic control. Results: Log‐transformed HS‐CRP value (log HS‐CRP) was strongly correlated with BMI (r = 0.448, p < 0.01). Log HS‐CRP was also correlated with the presence of MetS or each component of MetS. Furthermore, a positive significant trend in HS‐CRP levels was shown with an increasing number of MetS components (p < 0.05). Log HS‐CRP showed a significant positive correlation with carotid artery intima‐media thickness (IMT) (r = 0.152, p < 0.01). In multiple step‐wise regression analysis, BMI, hemoglobin A_1c, right IMT, duration of diabetes, and triglyceride were selected as explanatory variables for log HS‐CRP (R² = 0.412). Under strict metabolic control, HS‐CRP was significantly (p < 0.01) lower, together with lower levels of other markers for MetS. The change in HS‐CRP was significantly correlated with the change in BMI (r = 0.161, p = 0.04). Discussion: In subjects with type 2 diabetes, HS‐CRP levels are related to MetS and subclinical atherosclerosis. Strict weight management and metabolic control were associated with a reduction in HS‐CRP levels, and changes in HS‐CRP were related to changes in weight, supporting the hypothesis that lifestyle modification reduces inflammation and the risk of CHD.     

Tunable and Efficient Tin Modified Nitrogen‐Doped Carbon Nanofibers for Electrochemical Reduction of Aqueous Carbon Dioxide

Efficient and selective earth‐abundant catalysts are highly desirable to drive the electrochemical conversion of CO₂ into value‐added chemicals. In this work, a low‐cost Sn modified N‐doped carbon nanofiber hybrid catalyst is developed for switchable CO₂ electroreduction in aqueous medium via a straightforward electrospinning technique coupled with a pyrolysis process. The electrocatalytic performance can be tuned by the structure of Sn species on the N‐doped carbon nanofibers. Sn nanoparticles drive efficient formate formation with a high current density of 11 mA cm^?2 and a faradaic efficiency of 62% at a moderate overpotential of 690 mV. Atomically dispersed Sn species promote conversion of CO₂ to CO with a high faradaic efficiency of 91% at a low overpotential of 490 mV. The interaction between Sn species and pyridinic‐N may play an important role in tuning the catalytic activity and selectivity of these two materials.     

Atomic‐Local Environments of Single‐Atom Catalysts: Synthesis,Electronic Structure,and Activity

Single‐atom catalysts (SACs) hold great promise for maximizing atomic efficiency of supported metals via the ultimate utilization of every single atom. The foreign isolated substitutions anchored on different supports build varieties of local structural centers, changing the physical and chemical properties. Thus, distinct atomic local environments for single‐atom catalysts are essential for determining superior catalytic performance for a wide variety of chemical reactions. The examples of synthesizing single atoms on various supports presented here deepen the understanding of the different structural and electronic properties of SACs, in which the metal single atom does not bind with any other atoms of this metal, but substantially interacts with the support ions. Due to the strong support effects, the ubiquitous aggregation of metal single atoms can be addressed, achieving highly stable SACs. This review discusses recent progress in theoretical electronic effects between atomic dopants and supports, which reveal the electronic structures of various SACs and offers guidance for rational prediction and design of highly stable and reactive SACs. It is argued that tuning this interaction by the selection of the supports toward favorable atomic and electronic structures on the surface should be taken into consideration for the development of more efficient SACs.     

Atomic‐Layer‐Deposited Aluminum and Zirconium Oxides for Surface Passivation of TiO2 in High‐Efficiency Organic Photovoltaics

The reduction in electronic recombination losses by the passivation of surfaces is a key factor enabling high‐efficiency solar cells. Here a strategy to passivate surface trap states of TiO₂ films used as cathode interlayers in organic photovoltaics (OPVs) through applying alumina (Al₂O₃) or zirconia (ZrO₂) insulating nanolayers by thermal atomic layer deposition (ALD) is investigated. The results suggest that the surface traps in TiO₂ are oxygen vacancies, which cause undesirable recombination and high electron extraction barrier, reducing the open‐circuit voltage and the short‐circuit current of the complete OPV device. It is found that the ALD metal oxides enable excellent passivation of the TiO₂ surface followed by a downward shift of the conduction band minimum. OPV devices based on different photoactive layers and using the passivated TiO₂ electron extraction layers exhibit a significant enhancement of more than 30% in their power conversion efficiencies compared to their reference devices without the insulating metal oxide nanolayers. This is a result of significant suppression of charge recombination and enhanced electron extraction rates at the TiO₂/ALD metal oxide/organic interface.     

Ultra‐High Surface Area Activated Porous Asphalt for CO2 Capture through Competitive Adsorption at High Pressures

This study reports an improved method for activating asphalt to produce ultra‐high surface area porous carbons. Pretreatment of asphalt (untreated Gilsonite, uGil ) at 400 °C for 3 h removes the more volatile organic compounds to form pretreated asphalt ( uGil‐P ) material with a larger fraction of higher molecular weight π‐conjugated asphaltenes. Subsequent activation of uGil‐P at 900 °C gives an ultra‐high surface area (4200 m² g^?1) porous carbon material ( uGil‐900 ) with a mixed micro and mesoporous structure. uGil‐900 shows enhanced room temperature CO₂ uptake capacity at 54 bar of 154 wt% (35 mmol g^?1). The CH₄ uptake capacity is 37.5 wt% (24 mmol g^?1) at 300 bar. These are relevant pressures in natural gas production. The room temperature working CO₂ uptake capacity for uGil‐900 is 19.1 mmol g^?1 (84 wt%) at 20 bar and 32.6 mmol g^?1 (143 wt%) at 50 bar. In order to further assess the reliability of uGil‐900 for CO₂ capture at elevated pressures, the authors study competitive sorption of CO₂ and CH₄ on uGil‐900 at pressures from 1 to 20 bar at 25 °C. CO₂/CH₄ displacement constants are measured at 2 to 40 bar, and found to increase significantly with pressure and surface area.     

Nitrogen‐mediated effects of elevated CO2 on intra‐aggregate soil pore structure

Soil pore structure has a strong influence on water retention, and is itself influenced by plant and microbial dynamics such as root proliferation and microbial exudation. Although increased nitrogen (N) availability and elevated atmospheric CO₂ concentrations (eCO₂) often have interacting effects on root and microbial dynamics, it is unclear whether these biotic effects can translate into altered soil pore structure and water retention. This study was based on a long‐term experiment (7 yr at the time of sampling) in which a C₄ pasture grass (Paspalum notatum) was grown on a sandy loam soil while provided factorial additions of N and CO₂. Through an analysis of soil aggregate fractal properties supported by 3D microtomographic imagery, we found that N fertilization induced an increase in intra‐aggregate porosity and a simultaneous shift toward greater accumulation of pore space in larger aggregates. These effects were enhanced by eCO₂ and yielded an increase in water retention at pressure potentials near the wilting point of plants. However, eCO₂ alone induced changes in the opposite direction, with larger aggregates containing less pore space than under control conditions, and water retention decreasing accordingly. Results on biotic factors further suggested that organic matter gains or losses induced the observed structural changes. Based on our results, we postulate that the pore structure of many mineral soils could undergo N‐dependent changes as atmospheric CO₂ concentrations rise, having global‐scale implications for water balance, carbon storage, and related rhizosphere functions.