In Situ Electrochemical Synthesis of MXenes without Acid/Alkali Usage in/for an Aqueous Zinc Ion Battery

The traditional method to fabricate a MXene based energy storage device starts from etching MAX phase particles with dangerous acid/alkali etchants to MXenes, followed by device assembly. This is a multistep protocol and is not environmentally friendly. Herein, an all‐in‐one protocol is proposed to integrate synthesis and battery fabrication of MXene. By choosing a special F‐rich electrolyte, MAX V₂AlC is directly exfoliated inside a battery and the obtained V₂CT_X MXene is in situ used to achieve an excellent battery performance. This is a one‐step process with all reactions inside the cell, avoiding any contamination to external environments. Through the lifetime, the device experiences three stages of exfoliation, electrode oxidation, and redox of V₂O₅. While the electrode is changing, the device can always be used as a battery and the performance is continuously enhanced. The resulting aqueous zinc ion battery achieves outstanding cycling stability (4000 cycles) and rate performance (97.5 mAh g^?1 at 64 A g^?1), distinct from all reported aqueous MXene‐based counterparts with pseudo‐capacitive properties, and outperforming most vanadium‐based zinc ion batteries with high capacity. This work sheds light on the green synthesis of MXenes, provides an all‐in‐one protocol for MXene devices, and extends MXenes’ application in the aqueous energy storage field.     

Low‐Temperature Reduction Strategy Synthesized Si/Ti3C2 MXene Composite Anodes for High‐Performance Li‐Ion Batteries

Silicon is attracting enormous attention due to its theoretical capacity of 4200 mAh g^?1 as an anode for Li‐ion batteries (LIBs). It is of fundamental importance and challenge to develop low‐temperature reaction route to controllably synthesize Si/Ti₃C₂ MXene LIBs anodes. Herein, a novel and efficient strategy integrating in situ orthosilicate hydrolysis and a low‐temperature reduction process to synthesize Si/Ti₃C₂ MXene composites is reported. The hydrolysis of tetraethyl orthosilicate leads to homogenous nucleation and growth of SiO₂ nanoparticles on the surface of Ti₃C₂ MXene. Subsequently, SiO₂ nanoparticles are reduced to Si via a low‐temperature (200 °C) reduction route. Importantly, Ti₃C₂ MXene not only provides fast transfer channels for Li⁺ and electrons, but also relieves volume expansion of Si during cycling. Moreover, the characteristics of excellent pseudocapacitive performance and high conductivity of Ti₃C₂ MXene can synergistically contribute to the enhancement of energy storage performance. As expected, Ti₃C₂/Si anode exhibits an outstanding specific capacity of 1849 mAh g^?1 at 100 mA g^?1, even retaining 956 mAh g^?1 at 1 A g^?1. The low‐temperature synthetic route to Si/Ti₃C₂ MXene electrodes and involved battery‐capacitive dual‐model energy storage mechanism has potential in the design of novel high‐performance electrodes for energy storage devices.     

Achieving High Pseudocapacitance of 2D Titanium Carbide (MXene) by Cation Intercalation and Surface Modification

Supercapacitors attract great interest because of the increasing and urgent demand for environment‐friendly high‐power energy sources. Ti₃C₂, a member of MXene family, is a promising electrode material for supercapacitors owing to its excellent chemical and physical properties. However, the highest gravimetric capacitance of the MXene‐based electrodes is still relatively low (245 F g^?1) and the key challenge to improve this is to exploit more pseudocapacitance by increasing the active site concentration. Here, a method to significantly improve the gravimetric capacitance of Ti₃C₂T_x MXenes by cation intercalation and surface modification is reported. After K⁺ intercalation and terminal groups (OH^?/F^?) removing , the intercalation pseudocapacitance is three times higher than the pristine MXene, and MXene sheets exhibit a significant enhancement (about 211% of the origin) in the gravimetric capacitance (517 F g^?1 at a discharge rate of 1 A g^?1). Moreover, the as‐prepared electrodes show above 99% retention over 10 000 cycles. This improved electrochemical performance is attributed to the large interlayer voids of Ti₃C₂ and lowest terminated surface group concentration. This study demonstrates a new strategy applicable to other MXenes (Ti₂CT_x , Nb₂CT_x , etc.) in maximizing their potential applications in energy storage.     

One‐Step Synthesis of 2‐Ethylhexylamine Pillared Vanadium Disulfide Nanoflowers with Ultralarge Interlayer Spacing for High‐Performance Magnesium Storage

Rechargeable magnesium batteries (RMBs) are attractive candidates for large‐scale energy storage owing to the high theoretical specific capacity, rich earth abundance, and good safety characteristics. However, the development of desirable cathode materials for RMBs is constrained by the high polarity and slow intercalation kinetics of Mg²⁺ ions. Herein, it is demonstrated that 2‐ethylhexylamine pillared vanadium disulfide nanoflowers (expanded VS₂) with enlarged interlayer distances exhibit greatly boosted electrochemical performance as a cathode material in RMBs. Through a one‐step solution‐phase synthesis and in situ 2‐ethylhexylamine intercalation process, VS₂ nanoflowers with ultralarge interlayer spacing are prepared. A series of ex situ characterizations verify that the cathode of expanded VS₂ nanoflowers undergoes a reversible intercalation reaction mechanism, followed by a conversion reaction mechanism. Electrochemical kinetics analysis reveal a relatively fast Mg‐ion diffusivity of expanded VS₂ nanoflowers in the order of 10^?11–10^?12 cm² s^?1, and the pseudocapacitive contribution is up to 64% for the total capacity at 1 mV s^?1. The expanded VS₂ nanoflowers show highly reversible discharge capacity (245 mAh g^?1 at 100 mA g^?1), good rate capability (103 mAh g^?1 at 2000 mA g^?1), and stable cycling performance (90 mAh g^?1 after 600 cycles at 1000 mA g^?1).     

Unlocking Few‐Layered Ternary Chalcogenides for High‐Performance Potassium‐Ion Storage

Potassium‐ion batteries (KIBs) have attracted increasing attention for grid‐scale energy storage due to the abundance of potassium resources, low cost, and competitive energy density. The key challenge for KIBs is to develop high‐performance electrode materials. However, the exploration of high‐capacity and ultrastable electrodes for KIBs remains challenging because of the sluggish diffusion kinetics of K⁺ ions during the charging/discharging processes. This study reports for the first time a facile ion‐intercalation‐mediated exfoliation method with Mg²⁺ cations and NO₃^– anions as ion assistants for the fabrication of expanded few‐layered ternary Ta₂NiSe₅ (EF‐TNS) flakes with interlayer spacing up to 1.1 nm and abundant Se sites (NiSe₄ tetrahedra/TaSe₆ octahedra clusters) for superior potassium‐ion storage. The EF‐TNS deliver a high capacity of 315 mAh g^–1, excellent rate capability (121 mAh g^–1 at a current density of 1000 mA g^–1), and ultrastable cycling performance (81.4% capacity retention after 1100 cycles). Detailed theoretical analysis via first‐principles calculations and experimental results elucidate that K⁺ ions intercalate through the expanded interlayers effectively and prefer to transport along zigzag pathways in layered Ta₂NiSe₅. This work provides a new avenue for designing novel ternary intercalation/pseudocapacitance‐type KIBs with high capacity, excellent rate capability, and superior long‐term cycling performance.     

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

The detrimental shuttle effect in lithium–sulfur batteries mainly results from the mobility of soluble polysulfide intermediates and their sluggish conversion kinetics. Herein, presented is a multifunctional catalyst with the merits of strong polysulfides adsorption ability, superior polysulfides conversion activity, high specific surface area, and electron conductivity by in situ crafting of the TiO₂‐MXene (Ti₃C₂T_x) heterostructures. The uniformly distributed TiO₂ on MXene sheets act as capturing centers to immobilize polysulfides, the hetero‐interface ensures rapid diffusion of anchored polysulfides from TiO₂ to MXene, and the oxygen‐terminated MXene surface is endowed with high catalytic activity toward polysulfide conversion. The improved lithium–sulfur batteries deliver 800 mAh g^?1 at 2 C and an ultralow capacity decay of 0.028% per cycle over 1000 cycles at 2 C. Even with a high sulfur loading of 5.1 mg cm^?2, the capacity retention of 93% after 200 cycles is still maintained. This work sheds new insights into the design of high‐performance catalysts with manipulated chemical components and tailored surface chemistry to regulate polysulfides in Li–S batteries.     

Enhanced Li‐Ion Accessibility in MXene Titanium Carbide by Steric Chloride Termination

Pseudocapacitance is a key charge storage mechanism to advanced electrochemical energy storage devices distinguished by the simultaneous achievement of high capacitance and a high charge/discharge rate by using surface redox chemistries. MXene, a family of layered compounds, is a pseudocapacitor‐like electrode material which exhibits charge storage through exceptionally fast ion accessibility to redox sites. Here, the authors demonstrate steric chloride termination in MXene Ti₂CT_x (T_x : surface termination groups) to open the interlayer space between the individual 2D Ti₂CT_x units. The open interlayer space significantly enhances Li‐ion accessibility, leading to high gravimetric and volumetric capacitances (300 F g^?1 and 130 F cm^?3) with less diffusion limitation. A Li‐ion hybrid capacitor consisting of the Ti₂CT_x negative electrode and the LiNi_1/3Co_1/3Mn_1/3O₂ positive electrode displays an unprecedented specific energy density of 160 W h kg^?1 at 220 W kg^?1 based on the total weight of positive and negative active materials.     

Partially Reduced Holey Graphene Oxide as High Performance Anode for Sodium‐Ion Batteries

The current Na⁺ storage performance of carbon‐based materials is still hindered by the sluggish Na⁺ ion transfer kinetics and low capacity. Graphene and its derivatives have been widely investigated as electrode materials in energy storage and conversion systems. However, as anode materials for sodium‐ion batteries (SIBs), the severe π–π restacking of graphene sheets usually results in compact structure with a small interlayer distance and a long ion transfer distance, thus leading to low capacity and poor rate capability. Herein, partially reduced holey graphene oxide is prepared by simple H₂O₂ treatment and subsequent low temperature reduction of graphene oxide, leading to large interlayer distance (0.434 nm), fast ion transport, and larger Na⁺ storage space. The partially remaining oxygenous groups can also contribute to the capacity by redox reaction. As anode material for SIBs, the optimized electrode delivers high reversible capacity, high rate capability (365 and 131 mAh g^?1 at 0.1 and 10 A g^?1, respectively), and good cycling performance (163 mAh g^?1 after 3000 cycles at a current density of 2 A g^?1), which is among the best reported performances for carbon‐based SIB anodes.     

2D Amorphous V2O5/Graphene Heterostructures for High‐Safety Aqueous Zn‐Ion Batteries with Unprecedented Capacity and Ultrahigh Rate Capability

Rechargeable aqueous zinc‐ion batteries (ZIBs) are appealing due to their high safety, zinc abundance, and low cost. However, developing suitable cathode materials remains a great challenge. Herein, a novel 2D heterostructure of ultrathin amorphous vanadium pentoxide uniformly grown on graphene (A‐V₂O₅/G) with a very short ion diffusion pathway, abundant active sites, high electrical conductivity, and exceptional structural stability, is demonstrated for highly reversible aqueous ZIBs (A‐V₂O₅/G‐ZIBs), coupling with unprecedented high capacity, rate capability, long‐term cyclability, and excellent safety. As a result, 2D A‐V₂O₅/G heterostructures for stacked ZIBs at 0.1 A g^?1 display an ultrahigh capacity of 489 mAh g^?1, outperforming all reported ZIBs, with an admirable rate capability of 123 mAh g^?1 even at 70 A g^?1. Furthermore, the new‐concept prototype planar miniaturized zinc‐ion microbatteries (A‐V₂O₅/G‐ZIMBs), demonstrate a high volumetric capacity of 20 mAh cm^?3 at 1 mA cm^?2, long cyclability; holding high capacity retention of 80% after 3500 cycles, and in‐series integration, demonstrative of great potential for highly‐safe microsized power sources. Therefore, the exploration of such 2D heterostructure materials with strong synergy is a reliable strategy for developing safe and high‐performance energy storage devices.     

Enhanced Potassium Ion Battery by Inducing Interlayer Anionic Ligands in MoS1.5Se0.5 Nanosheets with Exploration of the Mechanism

The strategy of inducing interlayer anionic ligands in 2D MoS_1.5Se_0.5 nanosheets is employed to consolidate the interlayer band gap and optimize the electronic structure for the potassium ion battery. It combines complementary advantages from two kinds of anionic ligands with high conductivity and good affinity with potassium ions. The potassium ion diffusion rate is accelerated as well by an optimized lower energy barrier for ion diffusion pathways, with the formation of highly reversible KMo₃Se₃ crystal other than K_0.4MoS₂/K₂MoS_4, which encounters a much slower electro/ion diffusion rate upon discharging. These advances deliver enhanced potassium storage properties with excellent cycling stability, with retained specific capacity of 531.6 mAh g^?1 at a current density of 200 mA g^?1 even after 1000 cycles, and high rate capability with specific capacity of 270.1 mAh g^?1 at 5 A g^?1. The insertion and conversion mechanism are also elucidated by a combination of density functional theory computations and in situ synchrotron measurements.     

Molecular Engineering of Monodisperse SnO2 Nanocrystals Anchored on Doped Graphene with High‐Performance Lithium/Sodium‐Storage Properties in Half/Full Cells

The fabrication of ultrasmall and high‐content SnO₂ nanocrystals anchored on doped graphene can endow SnO₂ with superior electrochemical properties. Herein, an effective strategy, involving molecular engineering of a layer‐by‐layer assembly technique, is proposed to homogeneously anchor SnO₂ nanocrystals on nitrogen/sulfur codoped graphene (NSGS), which serves as an advanced anode material in lithium/sodium‐ion batteries (LIBs/SIBs). Benefiting from novel design and specific structure, the optimized NSGS for LIBs displays high initial capacity (2123.9 mAh g^?1 at 0.1 A g^?1), long‐term cycling performance (only 0.8% loss after 500 cycles), and good rate capability (477.4 mAh g^?1 at 5 A g^?1). In addition, the optimized NSGS for SIBs also delivers high initial capacity (791.7 mAh g^?1 at 0.1 A g^?1) and high reversible capacity (180.2 mAh g^?1 after 500 cycles at 0.5 A g^?1). Meanwhile, based on the detailed analysis of phase transition and electrochemical reaction kinetics, the reaction mechanisms of NSGS in LIBs and SIBs as well as the distinction in LIBs/SIBs are clearly articulated. Notably, to further explore the practical application, Li/Na⁺ full cells are also assembled by coupling the optimized NSGS anode with LiCoO₂ and Na₃V₂(PO₄)₃/C cathodes, respectively.     

A Strategy for Synthesis of Carbon Nitride Induced Chemically Doped 2D MXene for High‐Performance Supercapacitor Electrodes

A step‐by‐step strategy is reported for improving capacitance of supercapacitor electrodes by synthesizing nitrogen‐doped 2D Ti₂CT_x induced by polymeric carbon nitride (p‐C₃N₄), which simultaneously acts as a nitrogen source and intercalant. The NH₂CN (cyanamide) can form p‐C₃N₄ on the surface of Ti₂CT_x nanosheets by a condensation reaction at 500–700 °C. The p‐C₃N₄ and Ti₂CT_x complexes are then heat‐treated to obtain nitrogen‐doped Ti₂CT_x nanosheets. The triazine‐based p‐C₃N₄ decomposes above 700 °C; thus, the nitrogen species can be surely doped into the internal carbon layer and/or defect site of Ti₂CT_x nanosheets at 900 °C. The extended interlayer distance and c‐lattice parameters (c‐LPs of 28.66 Å) of Ti₂CT_x prove that the p‐C₃N₄ grown between layers delaminate the nanosheets of Ti₂CT_x during the doping process. Moreover, 15.48% nitrogen doping in Ti₂CT_x improves the electrochemical performance and energy storage ability. Due to the synergetic effect of delaminated structures and heteroatom compositions, N‐doped Ti₂CT_x shows excellent characteristics as an electrochemical capacitor electrode, such as perfectly rectangular cyclic voltammetry results (CVs, R² = 0.9999), high capacitance (327 F g^?1 at 1 A g^?1, increased by ≈140% over pristine‐Ti₂CT_x), and stable long cyclic performance (96.2% capacitance retention after 5000 cycles) at high current density (5 A g^?1).     

An Ultrastable Presodiated Titanium Disulfide Anode for Aqueous “Rocking‐Chair” Zinc Ion Battery

Rechargeable aqueous Zn‐based batteries are attractive candidates as energy storage technology, but the uncontrollable Zn dendrites, low stripping/plating coulombic efficiency, and inefficient utilization of Zn metal limit the battery reliability and energy density. Herein, for the first time, a novel presodiated TiS₂ (Na_0.14TiS₂) is proposed and investigated as an intercalated anode for aqueous Zn‐ion batteries, showing a capacity of 140 mAh g^?1 with a suitable potential of 0.3 V (vs Zn²⁺/Zn) at 0.05 A g^?1 and superior cyclability of 77% retention over 5000 cycles at 0.5 A g^?1. The remarkable performance originates from the buffer phase formation of Na_0.14TiS₂ after chemically presodiating TiS₂, which not only improves the structural reversibility and stability but also enhances the diffusion coefficient and electronic conductivity, and lowers cation migration barrier, as evidenced by a series of experimental and theoretical studies. Moreover, an aqueous “rocking‐chair” Zn‐ion full battery is successfully demonstrated by this Na_0.14TiS₂ anode and ZnMn₂O₄ cathode, which delivers a capacity of 105 mAh g^?1 (for anode) with an average voltage of 0.95 V at 0.05 A g^?1 and preserves 74% retention after 100 cycles at 0.2 A g^?1, demonstrating the feasibility of Zn‐ion full batteries for energy storage applications.     

Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage

Soft carbon has attracted tremendous attention as an anode in rocking‐chair batteries owing to its exceptional properties including low‐cost, tunable interlayer distance, and favorable electronic conductivity. However, it fails to exhibit decent performance for sodium‐ion storage owing to difficulties in the formation of sodium intercalation compounds. Here, microporous soft carbon nanosheets are developed via a microwave induced exfoliation strategy from a conventional soft carbon compound obtained by pyrolysis of 3,4,9,10‐perylene tetracarboxylic dianhydride. The micropores and defects at the edges synergistically leads to enhanced kinetics and extra sodium‐ion storage sites, which contribute to the capacity increase from 134 to 232 mAh g^?1 and a superior rate capability of 103 mAh g^?1 at 1000 mA g^?1 for sodium‐ion storage. In addition, the capacitance‐dominated sodium‐ion storage mechanism is identified through the kinetics analysis. The in situ X‐ray diffraction analyses are used to reveal that sodium ions intercalate into graphitic layers for the first time. Furthermore, the as‐prepared nanosheets can also function as an outstanding anode for potassium‐ion storage (reversible capacity of 291 mAh g^?1) and dual‐ion full cell (cell‐level capacity of 61 mAh g^?1 and average working voltage of 4.2 V). These properties represent the potential of soft carbon for achieving high‐energy, high‐rate, and low‐cost energy storage systems.     

Nanoflake‐Assembled Hierarchical Na3V2(PO4)3/C Microflowers: Superior Li Storage Performance and Insertion/Extraction Mechanism

Na₃V₂(PO₄)₃ (NVP) has excellent electrochemical stability and fast ion diffusion coefficient due to the 3D Na⁺ ion superionic conductor framework, which make it an attractive cathode material for lithium ion batteries (LIBs). However, the electrochemical performance of NVP needs to be further improved for applications in electric vehicles and hybrid electric vehicles. Here, nanoflake‐assembled hierarchical NVP/C microflowers are synthesized using a facile method. The structure of as‐synthesized materials enhances the electrochemical performance by improving the electron conductivity, increasing electrode–electrolyte contact area, and shortening the diffusion distance. The as‐synthesized material exhibits a high capacity (230 mAh g^?1), excellent cycling stability (83.6% of the initial capacity is retained after 5000 cycles), and remarkable rate performance (91 C) in hybrid LIBs. Meanwhile, the hybrid LIBs with the structure of NVP || 1 m LiPF₆/EC (ethylene carbonate) + DMC (dimethyl carbonate) || NVP and Li₄Ti₅O₁₂ || 1 m LiPF₆/EC + DMC || NVP are assembled and display capacities of 79 and 73 mAh g^?1, respectively. The insertion/extraction mechanism of NVP is systematically investigated, based on in situ X‐ray diffraction. The superior electrochemical performance, the design of hybrid LIBs, and the insertion/extraction mechanism investigation will have profound implications for developing safe and stable, high‐energy, and high‐power LIBs.     

Porosity‐Controlled TiNb2O7 Microspheres with Partial Nitridation as A Practical Negative Electrode for High‐Power Lithium‐Ion Batteries

Titanium niobium oxide (TiNb₂O₇) has been recognized as a promising anode material for lithium‐ion batteries (LIBs) in view of its potential to operate at high rates with improved safety and high theoretical capacity of 387 mAh g^?1. However, it suffers from poor Li⁺ ion diffusivity and low electronic conductivity originated from its wide band gap energy (E_g > 2 eV). Here, porous TiNb₂O₇ microspheres (PTNO MSs) are prepared via a facile solvothermal reaction. PTNO MSs have a particle size of ≈1.2 μm and controllable pore sizes in the range of 5–35 nm. Ammonia gas nitridation treatment is conducted on PTNO MSs to introduce conducting Ti_1?xNb_xN layer on the surface and form nitridated PTNO (NPTNO) MSs. The porous structure and conducting Ti_1?xNb_xN layer enhance the transport kinetics associated with Li⁺ ions and electrons, which leads to significant improvement in electrochemical performance. As a result, the NPTNO electrode shows a high discharge capacity of ≈265 mAh g^?1, remarkable rate capability (≈143 mAh g^?1 at 100 C) and durable long‐term cyclability (≈91% capacity retention over 1000 cycles at 5 C). These results demonstrate the great potential of TiNb₂O₇ as a practical high‐rate anode material for LIBs.     

Amorphous Carbon Coated High Grain Boundary Density Dual Phase Li4Ti5O12‐TiO2: A Nanocomposite Anode Material for Li‐Ion Batteries

This work introduces an effective, inexpensive, and large‐scale production approach to the synthesis of a carbon coated, high grain boundary density, dual phase Li₄Ti₅O₁₂‐TiO₂ nanocomposite anode material for use in rechargeable lithium‐ion batteries. The microstructure and morphology of the Li₄Ti₅O₁₂‐TiO₂‐C product were characterized systematically. The Li₄Ti₅O₁₂‐TiO₂‐C nanocomposite electrode yielded good electrochemical performance in terms of high capacity (166 mAh g^?1 at a current density of 0.5 C), good cycling stability, and excellent rate capability (110 mAh g^?1 at a current density of 10 C up to 100 cycles). The likely contributing factors to the excellent electrochemical performance of the Li₄Ti₅O₁₂‐TiO₂‐C nanocomposite could be related to the improved morphology, including the presence of high grain boundary density among the nanoparticles, carbon layering on each nanocrystal, and grain boundary interface areas embedded in a carbon matrix, where electronic transport properties were tuned by interfacial design and by varying the spacing of interfaces down to the nanoscale regime, in which the grain boundary interface embedded carbon matrix can store electrolyte and allows more channels for the Li+ ion insertion/extraction reaction. This research suggests that carbon‐coated dual phase Li₄Ti₅O₁₂‐TiO₂ nanocomposites could be suitable for use as a high rate performance anode material for lithium‐ion batteries.     

Pseudo‐Zn–Air and Zn‐Ion Intercalation Dual Mechanisms to Realize High‐Areal Capacitance and Long‐Life Energy Storage in Aqueous Zn Battery

Aqueous zinc batteries are considered as promising alternatives to lithium ion batteries owing to their low cost and high safety. However, the developments of state‐of‐the‐art zinc‐ion batteries (ZIB) and zinc–air batteries (ZAB) are limited by the unsatisfied capacities and poor cycling stabilities, respectively. It is of significance in utilizing the long‐cycle life of ZIB and high capacity of ZAB to exploit advanced energy storage systems. Herein, a bulk composite of graphene oxide and vanadium oxide (V₅O₁₂·6H₂O) as cathode material for aqueous Zn batteries in a mild electrolyte is employed. The battery performance is demonstrated to arise from a combination of the reversible cations insertion/extraction in vanadium oxide and especially the electrochemical redox reactions on the surface functional groups of graphene oxide (named as pseudo‐Zn–air mechanism). Along with adjusting the hydroxyl content on the surface of graphene oxide, the specific capacity is significantly increased from 342 mAh g^?1 to a maximum of 496 mAh g^?1 at 100 mA g^?1. The surface‐controlled kinetics occurring in the bulk composite ensure a high areal capacity of 10.6 mAh cm^?2 at a mass loading of 26.5 mg cm^?2, and a capacity retention of 84.7% over 10 000 cycles at a high current density of 10 A g^?1.     

Mechanistic Insight into the Electrochemical Performance of Zn/VO2 Batteries with an Aqueous ZnSO4 Electrolyte

Rechargeable aqueous zinc‐ion batteries (ZIBs) are promising for cheap stationary energy storage. Challenges for Zn‐ion insertion hosts are the large structural changes of the host structure upon Zn‐ion insertion and the divalent Zn‐ion transport, challenging cycle life and power density respectively. Here a new mechanism is demonstrated for the VO₂ cathode toward proton insertion accompanied by Zn‐ion storage through the reversible deposition of Zn₄(OH)₆SO₄·5H₂O on the cathode surface, supported by operando X‐ray diffraction, X‐ray photoelectron spectroscopy, neutron activation analysis, and density functional theory simulations. This leads to an initial discharge capacity of 272 mAh g^?1 at a current density of 3.0 A g^?1, of which 75.5% is maintained after 945 cycles. It is proposed that the competition between proton and Zn‐ion insertion in the VO₂ host is determined by the solvation energy of the salt anion and proton insertion energetics, where proton insertion has the advantage of minimal structural distortion leading to a long cycle life. As the discharge kinetics are capacitive for the first half of the process and diffusion limited for the second half, the VO₂ cathode takes the middle road possessing both fast kinetics and high practical capacities revealing a reaction mechanism that provides new perspective for the development of aqueous ZIBs.     

NaCa0.6V6O16·3H2O as an Ultra‐Stable Cathode for Zn‐Ion Batteries: The Roles of Pre‐Inserted Dual‐Cations and Structural Water in V3O8 Layer

Rechargeable aqueous batteries with Zn²⁺ as a working‐ion are promising candidates for grid‐scale energy storage because of their intrinsic safety, low‐cost, and high energy‐intensity. However, suitable cathode materials with excellent Zn²⁺‐storage cyclability must be found in order for Zinc‐ion batteries (ZIBs) to find practical applications. Herein, NaCa_0.6V₆O₁₆·3H₂O (NaCaVO) barnesite nanobelts are reported as an ultra‐stable ZIB cathode material. The original capacity reaches 347 mAh g^?1 at 0.1 A g^?1, and the capacity retention rate is 94% after 2000 cycles at 2 A g^?1 and 83% after 10 000 cycles at 5 A g^?1, respectively. Through a combined theoretical and experimental approach, it is discovered that the unique V₃O₈ layered structure in NaCaVO is energetically favorable for Zn²⁺ diffusion and the structural water situated between V₃O₈ layers promotes a fast charge‐transfer and bulk migration of Zn²⁺ by enlarging gallery spacing and providing more Zn‐ion storage sites. It is also found that Na⁺ and Ca²⁺ alternately suited in V₃O₈ layers are the essential stabilizers for the layered structure, which play a crucial role in retaining long‐term cycling stability.