Additive‐Free Organic Solar Cells with Power Conversion Efficiency over 10%

Nowadays, solvent additives are widely used in organic solar cells (OSCs) to tune the nano‐morphology of the active blend film and enhance the device performance. With their help, power conversion efficiencies (PCEs) of OSCs have recently stepped over 10%. However, residual additive in the device can induce undesirable morphological change and also accelerate photo‐oxidation degradation of the active blend film. Thereby, their involvements are actually unfavorable for practical applications. Here, a donor material PThBDTP is employed, and PThBDTP:PC71BM based OSCs are fabricated. A PCE of over 10% is achieved without using any additives and film post‐treatments. The device displays a high open‐circuit voltage of 0.977 V, a large short‐circuit current density of 13.49 mA cm^‐2, and a high fill factor of 76.3%. These results represent an important step towards developing high‐efficiency additive‐free OSCs.     

Scalable,Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors

Graphene micro‐supercapacitors (MSCs) are an attractive energy storage technology for powering miniaturized portable electronics. Despite considerable advances in recent years, device fabrication typically requires conventional microfabrication techniques, limiting the translation to cost‐effective and high‐throughput production. To address this issue, we report here a self‐aligned printing process utilizing capillary action of liquid inks in microfluidic channels to realize scalable, high‐fidelity manufacturing of graphene MSCs. Microstructured ink receivers and capillary channels are imprinted on plastic substrates and filled by inkjet printing of functional materials into the receivers. The liquid inks move under capillary flow into the adjoining channels, allowing reliable patterning of electronic materials in complex structures with greatly relaxed printing tolerance. Leveraging this process with pristine graphene and ion gel inks, miniaturized all‐solid‐state graphene MSCs are demonstrated to concurrently achieve outstanding resolution (active footprint: <1 mm², minimum feature size: 20 µm) and yield (44/44 devices), while maintaining a high specific capacitance (268 µF cm^–2) and robust stability to extended cycling and bending, establishing an effective route to scale down device size while scaling up production throughput.     

Ethylene Carbonate‐Free Electrolytes for High‐Nickel Layered Oxide Cathodes in Lithium‐Ion Batteries

Layered lithium nickel oxide (LiNiO₂) can provide very high energy density among intercalation cathode materials for lithium‐ion batteries, but suffers from poor cycle life and thermal‐abuse tolerance with large lithium utilization. In addition to stabilization of the active cathode material, a concurrent development of electrolyte systems of better compatibility is critical to overcome these limitations for practical applications. Here, with nonaqueous electrolytes based on exclusively aprotic acyclic carbonates free of ethylene carbonate (EC), superior electrochemical and thermal characteristics are obtained with an ultrahigh‐nickel cathode (LiNi_0.94Co_0.06O₂), capable of reaching a 235 mA h g^?1 specific capacity. Pouch‐type graphite|LiNi_0.94Co_0.06O₂ cells in EC‐free electrolytes withstand several hundred charge–discharge cycles with minor degradation at both ambient and elevated temperatures. In thermal‐abuse tests, the cathode at full charge, while reacting aggressively with EC‐based electrolytes below 200 °C, shows suppressed self‐heating without EC. Through 3D chemical and structural analyses, the intriguing impact of EC is visualized in aggravating unwanted surface parasitic reactions and irreversible bulk structural degradation of the cathode at high voltages. These results provide important insights in designing high‐energy electrodes for long‐lasting and reliable lithium‐ion batteries.     

Two‐Step Activated Carbon Cloth with Oxygen‐Rich Functional Groups as a High‐Performance Additive‐Free Air Electrode for Flexible Zinc–Air Batteries

A flexible air electrode (FAE) with both high oxygen electrocatalytic activity and excellent flexibility is the key to the performance of various flexible devices, such as Zn–air batteries. A facile two‐step method, mild acid oxidation followed by air calcination that directly activates commercial carbon cloth (CC) to generate uniform nanoporous and super hydrophilic surface structures with optimized oxygen‐rich functional groups and an enhanced surface area, is presented here. Impressively, this two‐step activated CC (CC‐AC) exhibits superior oxygen electrocatalytic activity and durability, outperforming the oxygen‐doped carbon materials reported to date. Especially, CC‐AC delivers an oxygen evolution reaction (OER) overpotential of 360 mV at 10 mA cm^?2 in 1 m KOH, which is among the best performances of metal‐free OER electrocatalysts. The practical application of CC‐AC is presented via its use as an FAE in a flexible rechargeable Zn–air battery. The bendable battery achieves a high open circuit voltage of 1.37 V, a remarkable peak power density of 52.3 mW cm^?3 at 77.5 mA cm^?3, good cycling performance with a small charge–discharge voltage gap of 0.98 V and high flexibility. This study provides a new approach to the design and construction of high‐performance self‐supported metal‐free electrodes.     

Vanadium Oxide Nanowire–Carbon Nanotube Binder‐Free Flexible Electrodes for Supercapacitors

Vanadium pentoxide (V₂O₅) layered nanostructures are known to have very stable crystal structures and high faradaic activity. The low electronic conductivity of V₂O₅ greatly limits the application of vanadium oxide as electrode materials and requires combining with conducting materials using binders. It is well known that the organic binders can degrade the overall performance of electrode materials and need carefully controlled compositions. In this study, we develop a simple method for preparing freestanding carbon nanotube (CNT)‐V₂O₅ nanowire (VNW) composite paper electrodes without using binders. Coin cell type (CR2032) supercapacitors are assembled using the nanocomposite paper electrode as the anode and high surface area carbon fiber electrode (Spectracarb 2225) as the cathode. The supercapacitor with CNT‐VNW composite paper electrode exhibits a power density of 5.26 kW Kg^?1 and an energy density of 46.3 Wh Kg^?1. (Li)VNWs and CNT composite paper electrodes can be fabricated in similar manner and show improved overall performance with a power density of 8.32 kW Kg^?1 and an energy density of 65.9 Wh Kg^?1. The power and energy density values suggest that such flexible hybrid nanocomposite paper electrodes may be useful for high performance electrochemical supercapacitors.     

Current Collecting Grids for ITO‐Free Solar Cells

Indium‐tin‐oxide (ITO) free polymer solar cells prepared by ink jet printing a composite front electrode comprising silver grid lines and a semitransparent PEDOT:PSS conductor are demonstrated. The effect of grid line density is explored for a large series of devices and a careful modeling study enabling the identification of the most rational grid structure is presented. Both optical and light beam induced current (LBIC) mapping of the devices are used to support the power loss model and to follow the evolution of the performance over time. Current generation is found to be evenly distributed over the active area initially progressing to a larger graduation in areas with different performance. Over time coating defects also become much more apparent in the LBIC images.     

Advanced Energy‐Storage Architectures Composed of Spinel Lithium Metal Oxide Nanocrystal on Carbon Textiles

Current battery technologies are known to suffer from kinetic problems associated with the solid‐state diffusion of Li⁺ in intercalation electrodes materials. Not only the use of nanostructure materials but also the design of electrode architectures can lead to more advanced properties. Here, advanced electrode architectures consisting of carbon textiles conformally covered by Li₄Ti₅O₁₂ nanocrystal are rationally designed and synthesized for lithium ion batteries. The efficient two‐step synthesis involves the growth of ultrathin TiO₂ nanosheets on carbon textiles, and subsequent conversion into spinel Li₄Ti₅O₁₂ through chemical lithiation. Importantly, this novel approach is simple and general, and it is used to successfully produce LiMn₂O₄/carbon composites textiles, one of the leading cathode materials for lithium ion batteries. The resulting 3D textile electrode, with various advantages including the direct electronic pathway to current collector, the easy access of electrolyte ions, the reduced Li⁺/e^? diffusion length, delivers excellent rate capability and good cyclic stability over the Li‐ion batteries of conventional configurations.     

Surface Pseudocapacitive Mechanism of Molybdenum Phosphide for High‐Energy and High‐Power Sodium‐Ion Capacitors

Sodium‐based energy storage technologies are potential candidates for large‐scale grid applications owing to the earth abundance and low cost of sodium resources. Transition metal phosphides, e.g. MoP, are promising anode materials for sodium‐ion storage, while their detailed reaction mechanisms remain largely unexplored. Herein, the sodium‐ion storage mechanism of hexagonal MoP is systematically investigated through experimental characterizations, density functional theory calculations, and kinetics analysis. Briefly, it is found that the naturally covered surface amorphous molybdenum oxides layers on the MoP grains undergo a faradaic redox reaction during sodiation and desodiation, while the inner crystalline MoP remains unchanged. Remarkably, the MoP anode exhibits a pseudocapacitive‐dominated behavior, enabling the high‐rate sodium storage performance. By coupling the pseudocapacitive anode with a high‐rate‐battery‐type Na₃V₂O₂(PO₄)₂F@rGO cathode, a novel sodium‐ion full cell delivers a high energy density of 157 Wh kg^?1 at 97 W kg^?1 and even 52 Wh kg^?1 at 9316 W kg^?1. These findings present the deep understanding of the sodium‐ion storage mechanism in hexagonal MoP and offer a potential route for the design of high‐rate sodium‐ion storage materials and devices.     

Highly Defective Layered Double Perovskite Oxide for Efficient Energy Storage via Reversible Pseudocapacitive Oxygen‐Anion Intercalation

The use of perovskite materials as anion‐based intercalation pseudocapacitor electrodes has received significant attention in recent years. Notably, these materials, characterized by high oxygen vacancy concentrations, do not require high surface areas to achieve a high energy storage capacity as a result of the bulk intercalation mechanism. This study reports that reduced PrBaMn₂O_6–δ (r‐PBM), possessing a layered double perovskite structure, exhibits ultrahigh capacitance and functions as an excellent oxygen anion‐intercalation‐type electrode material for supercapacitors. Formation of the layered double perovskite structure, as facilitated by hydrogen treatment, is shown to significantly enhance the capacitance, with the resulting r‐PBM material demonstrating a very high gravimetric capacitance of 1034.8 F g^?1 and an excellent volumetric capacitance of ≈2535.3 F cm^?3 at a current density of 1 A g^?1. The resultant formation of a double perovskite crystal oxide with a specific layered structure leads to the r‐PBM with a substantially higher oxygen diffusion rate and oxygen vacancy concentration. These superior characteristics show immense promise for their application as oxygen anion‐intercalation‐type electrodes in pseudocapacitors.     

Solvent‐Free Synthesis of Thin,Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Thin solid‐state electrolytes with nonflammability, high ionic conductivity, low interfacial resistance, and good processability are urgently required for next‐generation safe, high energy density lithium metal batteries. Here, a 3D Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZTO) self‐supporting framework interconnected by polytetrafluoroethylene (PTFE) binder is prepared through a simple grinding method without any solvent. Subsequently, a garnet‐based composite electrolyte is achieved through filling the flexible 3D LLZTO framework with a succinonitrile solid electrolyte. Due to the high content of garnet ceramic (80.4 wt%) and high heat‐resistance of the PTFE binder, such a composite electrolyte film with nonflammability and high processability exhibits a wide electrochemical window of 4.8 V versus Li/Li⁺ and high ionic transference number of 0.53. The continuous Li⁺ transfer channels between interconnected LLZTO particles and succinonitrile, and the soft electrolyte/electrode interface jointly contribute to a high ambient‐temperature ionic conductivity of 1.2 × 10^?4 S cm^?1 and excellent long‐term stability of the Li symmetric battery (stable at a current density of 0.1 mA cm^?2 for over 500 h). Furthermore, as‐prepared LiFePO₄|Li and LiNi_0.5Mn_0.3Co_0.2O₂|Li batteries based on the thin composite electrolyte exhibit high discharge specific capacities of 153 and 158 mAh g^?1 respectively, and desirable cyclic stabilities at room temperature.     

Facile and Scalable Preparation of Ruthenium Oxide‐Based Flexible Micro‐Supercapacitors

Tremendous efforts have been invested in the development of the internet of things during the past 10 years. Implantable sensors still need embedded miniaturized energy harvesting devices, since commercialized thin films and microbatteries do not provide sufficient power densities and suffer from limited lifetime. Therefore, micro‐supercapacitors are good candidates to store energy and deliver power pulses while providing non‐constant voltage output with time. However, multistep expensive protocols involving mask aligners and sophisticated cleanrooms are used to prepare these devices. Here, a simple and versatile laser‐writing procedure to integrate flexible micro‐supercapacitors and microbatteries on current‐collector‐free polyimide foils is reported, starting from commercial powders. Ruthenium oxide (RuO₂)‐based micro‐supercapacitors are prepared by laser irradiation of a bilayered tetrachloroauric acid (HAuCl₄ · 3H₂O)–cellulose acetate/RuO₂ film deposited by spin‐coating, which leads to adherent Au/RuO₂ electrodes with a unique pillar morphology. The as‐prepared microdevices deliver 27 mF cm^?2/540 F cm^?3 in 1 m H₂SO₄ and retain 80% of the initial capacitance after 10 000 cycles. This simple process is applied to make carbon‐based micro‐supercapacitors, as well as metal oxide based pseudocapacitors and battery electrodes, thus offering a straightforward solution to prepare low‐cost flexible microdevices at a large scale.     

A Flexible Dual‐Ion Battery Based on PVDF‐HFP‐Modified Gel Polymer Electrolyte with Excellent Cycling Performance and Superior Rate Capability

Dual‐ion batteries (DIBs) have attracted increasing attention owing to their merits of high working voltage, low cost, and especially environmental friendliness. However, the cycling stability of most DIBs is still unsatisfying due to the decomposition of conventional liquid carbonate electrolytes under high working voltages. Exploration of gel polymer electrolytes (GPEs) with good electrochemical stability at high voltage is a possible strategy to optimize their cycling stability. A high‐performance flexible DIB based on a poly(vinylidene fluoride‐hexafluoro propylene) GPE codoped with poly(ethylene oxide) and graphene oxide via weak bond interactions is herein reported for the first time. The prepared polymer electrolyte shows a 3D porous network with significantly improved ionic conductivity up to 2.1 × 10^?3 S cm^?1, which is favorable for fast ionic transportation of both cations and anions. As a result, this DIB exhibits excellent cycling stability with a capacity retention of 92% after 2000 cycles at a high current rate of 5C (1C is corresponding to 100 mA g^?1), which is among the best performances of DIBs. Moreover, good flexibility and thermal stability (up to 90 °C) are also achieved for this battery, indicating its potential applications for high‐performance flexible energy storage devices.     

Fatigue‐Free and Bending‐Endurable Flexible Mn‐Doped Na0.5Bi0.5TiO3‐BaTiO3‐BiFeO3 Film Capacitor with an Ultrahigh Energy Storage Performance

As the rapid development of intelligent systems moves toward flexible electronics, capacitors with extraordinary flexibility and an outstanding energy storage performance will open up broad prospects for powering portable/wearable electronics and pulsed power applications. This work presents a simple one‐step process to fabricate a flexible Mn‐doped 0.97(0.93Na_0.5Bi_0.5TiO₃‐0.07BaTiO₃)‐0.03BiFeO₃ (Mn:NBT‐BT‐BFO) inorganic thin film capacitor with the assistance of a 2D fluorophlogopite mica substrate. The film element, which has a high breakdown strength, great relaxor dispersion, and the coexistence of ferroelectric and antiferroelectric phases, has a high recoverable energy storage density (W_rec ≈81.9 J cm^?3), high efficiency (η ≈64.4%), superior frequency stability (500 Hz–20 kHz), excellent antifatigue property (1 × 10⁹ cycles), and a broad operating temperature window (25–200 °C). The all‐inorganic Mn:NBT‐BT‐BFO/Pt/mica capacitor has a prominent mechanical‐bending resistance without obvious deterioration in its corresponding energy storage capability when it is subjected to a bending radius of 2 mm or repeated bending for 10³ cycles. This work is the first demonstration of an all‐inorganic flexible film capacitor and sheds light on dielectric energy storage devices for portable/wearable applications.     

Facile Synthesis of Polycyclic Aromatic Hydrocarbon (PAH)–Based Acceptors with Fine‐Tuned Optoelectronic Properties: Toward Efficient Additive‐Free Nonfullerene Organic Solar Cells

A series of polycyclic aromatic hydrocarbons (PAHs) with extended π‐conjugated cores (from naphthalene, anthracene, pyrene, to perylene) are incorporated into nonfullerene acceptors for the first time. Four different fused‐ring electron acceptors (FREAs), i.e., DTN‐IC‐2Ph , DTA‐IC‐3Ph , DTP‐IC‐4Ph , and DTPy‐IC‐5Ph , are prepared via simple and facile synthetic procedures, yielding a remarkable platform to study the structure–property relationship for nonfullerene solar cells. With the PAH core being extended systematically, the gradually redshifted absorption with enhanced molar extinction coefficient (ε) is realized, the energy level of the highest occupied molecular orbital is up‐shifted, and the electron mobility is greatly enhanced. Meanwhile, the solubility decreases and the molecular packing becomes strengthened. As a result, with an optimized combination of these characteristics, DTP‐IC‐4Ph attains good solubility, high molar extinction coefficient, complementary absorption, suitable morphology, well‐matched energy levels, as well as efficient charge dissociation and transport in blend film. Consequently, the DTP‐IC‐4Ph ‐based solar cells with a donor polymer, poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))] (PBDB‐T) exhibit a promising power conversion efficiency of 10.37% without any additives, which is close to the best performance achieved in additive‐free nonfullerene solar cells (NFSCs). The results demonstrate that the PAH building blocks have great potential for the construction of novel FREAs for efficient additive‐free NFSCs.