Metal–Organophosphine Framework‐Derived N,P‐Codoped Carbon‐Confined Cu3P Nanopaticles for Superb Na‐Ion Storage

Metal–organic framework derived approaches are emerging as a viable way to design carbon‐confined transitional metal phosphides (TMPs@C) for energy storage and conversion. However, their preparation generally involves a phosphorization using a large amount of additional P sources, which inevitably releases flammable, poisonous PH₃. Therefore, developing an efficient strategy for eco‐friendly synthesis of TMPs@C is full of challenges. Here, a metal–organophosphine framework (MOPF) derived strategy is developed to allow an eco‐friendly design of TMPs@C without an additional P source, avoiding release of PH₃. To illustrate this strategy, 1,3,5‐triaza‐7‐phosphaadamantane (PTA) ligands and Cu(NO₃)₂ metal centers are employed to construct Cu/PTA‐MOPFs nanosheets. Cu/PTA‐MOPFs can be directly converted to carbon‐confined Cu₃P nanoparticles by annealing. Benefiting from high heteroatom content in PTA, a high doping content of 3.92 at% N and 8.26 at% P can also be achieved in the carbon matrix. As a proof‐of‐concept application, N,P‐codoped carbon‐confined Cu₃P nanoparticles as anodes for Na‐ion storage exhibit a high initial reversible capacity of 332 mA h g^?1 at 50 mA g^?1, and superb rate and cyclic performance. Due to rich coordination modes of organophosphine, MOPFs are expected to become a promising molecular platform for design of various heteroatom‐doped TMPs@C for energy storage and conversion.     

Insights into the Na+ Storage Mechanism of Phosphorus‐Functionalized Hard Carbon as Ultrahigh Capacity Anodes

Hard carbon as a typical anode material for sodium ion batteries has received much attention in terms of its low cost and renewability. Herein, phosphorus‐functionalized hard carbon with a specific “honeycomb briquette” shaped morphology is synthesized via electrospinning technology. When applied as an anode material for Na⁺ storage, it exhibits an impressively high reversible capacity of 393.4 mA h g^?1 with the capacity retention up to 98.2% after 100 cycles. According to first‐principle calculation, the ultrahigh capacity of the as‐prepared anode is ascribed to the enhancement of Na‐absorption through formation of P?O and P? C bonds in graphitic layers when doped with phosphorus. Moreover, the increase of electron density around the Fermi level is found to be mainly caused by O atoms instead of P atoms.     

2D Zn‐Hexamine Coordination Frameworks and Their Derived N‐Rich Porous Carbon Nanosheets for Ultrafast Sodium Storage

Metal‐organic coordination frameworks have been widely used as efficient precursors for the preparation of functional carbon‐based materials with various nanostructures. However, to date, the design of 2D carbon nanostructures from single coordination frameworks remains a great challenge. Herein, an efficient strategy for the fabrication of N‐rich porous carbon nanosheets from 2D Zn‐hexamine coordination framework nanosheets is developed. Remarkably, the N‐doping level of carbon nanosheets can attain 16.54 at%. In addition, the thickness of the carbon nanosheets can effectively be tuned by simply adjusting the molar ratio of the starting materials. As a proof‐of‐concept application, the as‐prepared carbon nanosheets as an anode material for sodium‐ion batteries exhibit an ultrafast sodium storage capability of 194 mAh g^?1 even at 10 A g^?1. As far as it is known, such a high‐rate capability has been rarely achieved in previous studies on carbonaceous anode materials for Na‐ion storage. Moreover, this approach is readily controllable and could be extended to prepare a series of 2D N‐doped carbon‐based nanomaterials on a large scale.     

Pre‐Oxidation‐Tuned Microstructures of Carbon Anodes Derived from Pitch for Enhancing Na Storage Performance

Disordered carbons have captured extensive interest as anode materials for Na‐ion batteries (NIBs) due to the abundant resources, competitive specific capacity, and low cost. Here, a facile strategy of pre‐oxidation is successfully adopted to tune the microstructure of carbon anode to facilitate sodium storage. Pitch is selected as the low‐cost and high carbon yield precursor. An easy pre‐oxidation treatment in air can enable pitch to realize an effective structural conversion from ordered to disordered at further carbonization processes. Compared with the carbonized pristine pitch, the carbonized pre‐oxidation pitch increases the carbon yield from 54 to 67%, the sodium storage capacity from 94.0 to 300.6 mAh g^?1, and the initial Coulombic efficiency from 64.2 to 88.6%. Experiment results reveal that the introduction of oxygen based functional groups is the key to achieve the highly disordered structure, not only ensuring the cross‐linkage during low‐temperature pre‐oxidation process but also suppressing the carbon structure from melting and rearranging in the high‐temperature carbonization process. Most importantly, this facile pre‐oxidation strategy can also be extended to other carbon precursors to facilitate the low‐cost and high‐performance disordered carbon anodes for NIBs and beyond.     

General Dimension‐Controlled Synthesis of Hollow Carbon Embedded with Metal Singe Atoms or Core–Shell Nanoparticles for Energy Storage Applications

Metal–organic framework (MOF) derived carbonaceous nanocomposites have recently received enormous interest due to their intriguing physiochemical properties and diverse energy applications. However, there is a lack of general synthetic approaches that can achieve flexible dimension control while manipulating metal dispersion of MOF derived carbon composites. Herein, the authors present an attractive route for the growth of zeolitic imidazolate frameworks (ZIFs) with different dimensions and types of metal nodes that can be further transformed into either core–shell nanoparticles or metal single atoms. The formation of a ZIF‐8 seed layer on ZnO template is identified as the key step, enabling uniform growth of various ZIF materials (e.g., Zn/Co‐ZIF, Zn/Fe‐ZIF, and ZIF‐7) with different dimensions (1D, 2D, and 3D). Simultaneously, this approach avoids free growth of 0D MOF particles and diminishing of the ZnO template. To demonstrate the importance of dimensional control over the growth of ZIF materials for energy application, the 1D and 2D ZnO@ZIF precursors are converted into carbon nanotube and carbon nanoplate, which are decorated with Co/CoS₂ nanoparticles and Fe single atoms, respectively. Two high dimensional carbon nanocomposites deliver significantly enhanced performances compared to their 0D counterparts when employed as the Li‐ion battery anode and bifunctional oxygen electrocatalyst.     

Flexible Quasi‐Solid‐State Sodium‐Ion Capacitors Developed Using 2D Metal–Organic‐Framework Array as Reactor

Achieving high‐performance Na‐ion capacitors (NICs) has the particular challenge of matching both capacity and kinetics between the anode and cathode. Here a high‐power NIC full device constructed from 2D metal–organic framework (MOFs) array is reported as the reactive template. The MOF array is converted to N‐doped mesoporous carbon nanosheets (mp‐CNSs), which are then uniformly encapsulated with VO₂ and Na₃V₂(PO₄)₃ (NVP) nanoparticles as the electroactive materials. By this method, the high‐power performance of the battery materials is enabled to be enhanced significantly. It is discovered that such hybrid NVP@mp‐CNSs array can render ultrahigh rate capability (up to 200 C, equivalent to discharge within 18 s) and superior cycle performance, which outperforms all NVP‐based Na‐ion battery cathodes reported so far. A quasi‐solid‐state flexible NIC based on the NVP@mp‐CNSs cathode and the VO₂@mp‐CNSs anode is further assembled. This hybrid NIC device delivers both high energy density and power density as well as a good cycle stability (78% retention after 2000 cycles at 1 A g^?1). The results demonstrate the powerfulness of MOF arrays as the reactor for fabricating electrode materials.     

Exploiting the Condensation Reactions of Acetophenone to Engineer Carbon‐Encapsulated Nb2O5 Nanocrystals for High‐Performance Li and Na Energy Storage Systems

Efficient synthetic methods to produce high‐performance electrode‐active materials are crucial for developing energy storage devices for large‐scale applications, such as hybrid supercapacitors (HSCs). Here, an effective approach to obtain controllable carbon‐encapsulated T‐Nb₂O₅ nanocrystals (NCs) is presented, based on the solvothermal treatment of NbCl₅ in acetophenone. Two separate condensation reactions of acetophenone generate an intimate and homogeneous mixture of Nb₂O₅ particles and 1,3,5‐triphenylbenzene (TPB), which acts as a unique carbon precursor. The electrochemical performance of the resulting composites as anode electrode materials can be tuned by varying the Nb₂O₅/TPB ratio. Remarkable performances are achieved for Li‐ion and Na‐ion energy storage systems at high charge–discharge rates (specific capacities of ≈90 mAh g^?1 at 100 C rate for lithium and ≈125 mAh g^?1 at 20 C for sodium). High energy and power densities are also achieved with Li‐ and Na‐ion HSC devices constructed by using the Nb₂O₅/C composites as anode and activated carbon (YPF‐50) as cathode, demonstrating the excellent electrochemical properties of the materials synthesized with this approach.     

Nitrogen‐Doped Wrinkled Carbon Foils Derived from MOF Nanosheets for Superior Sodium Storage

Preparation of hierarchical carbon nanomaterials from metal?organicframeworks (MOFs) offers immense potential in the improvement of energy density, tunability, and stability of functional materials for energy storage and conversion. How interconnected nitrogen (N)‐doped wrinkled carbon foils derived from MOF nanosheets can serve as high‐performance sodium storage materials due to their multiscale porous structure is shown here. The novel N‐doped carbon nanomaterials are synthesized through the pyrolysis of 2D Mn‐based MOFs, which are produced through the assistance of monodentate ligands to enable the planar growth of MOFs. Subsequent acid etching creates hierarchical pores and channels to allow rapid ion transport. The resulting materials achieve high‐rate capability (165 and 150 mA h g^?1 at current densities of 8 and 10 A g^?1, respectively) and high stability (capacity retention 72.8% after 1000 cycling at 1.0 A g^?1), when they are used as anode in sodium‐ion capacitors.     

Side by Side Battery Technologies with Lithium‐Ion Based Batteries

In recent years, the electrochemical power sources community has launched massive research programs, conferences, and workshops on the “post Li battery era.” However, in this report it is shown that the quest for post Li‐ion and Li battery technologies is incorrect in its essence. This is the outcome of a three day discussion on the future technologies that could provide an answer to a question that many ask these days: Which are the technologies that can be regarded as alternative to Li‐ion batteries? The answer to this question is a rather surprising one: Li‐ion battery technology will be here for many years to come, and therefore the use of “post Li‐ion” battery technologies would be misleading. However, there are applications with needs for which Li‐ion batteries will not be able to provide complete technological solutions, as well as lower cost and sustainability. In these specific cases, other battery technologies will play a key role. Here, the term “side‐by‐side technologies” is coined alongside a discussion of its meaning. The progress report does not cover the topic of Li‐metal battery technologies, but covers the technologies of sodium‐ion, multivalent, metal–air, and flow batteries.     

Carbon‐Sheathed MoS2 Nanothorns Epitaxially Grown on CNTs: Electrochemical Application for Highly Stable and Ultrafast Lithium Storage

Molybdenum disulfide (MoS₂), which possesses a layered structure and exhibits a high theoretical capacity, is currently under intensive research as an anode candidate for next generation of Li‐ion batteries. However, unmodified MoS₂ suffers from a poor cycling stability and an inferior rate capability upon charge/discharge processes. Herein, a unique nanocomposite comprising MoS₂ nanothorns epitaxially grown on the backbone of carbon nanotubes (CNTs) and coated by a layer of amorphous carbon is synthesized via a simple method. The epitaxial growth of MoS₂ on CNTs results in a strong chemical coupling between active nanothorns and carbon substrate via C? S bond, providing a high stability as well as a high‐efficiency electron‐conduction/ion‐transportation system on cycling. The outer carbon layer can well‐accommodate the structural strain in the electrode upon lithium‐ion insertion/extraction. When employed as an anode for lithium storage, the prepared material exhibits remarkable electrochemical properties with a high specific capacity of 982 mA h g^?1 at 0.1 A g^?1, as well as excellent long‐cycling stability (905 mA h g^?1 at 1 A g^?1 after 500 cycles) and superior rate capability, confirming its potential application in high‐performance Li‐ion batteries.     

Hierarchical Microcables Constructed by CoP@C⊂Carbon Framework Intertwined with Carbon Nanotubes for Efficient Lithium Storage

Transition‐metal phosphides (TMPs)‐based electrode materials with high capacity have attracted considerable interest as a promising anode material for lithium?ion batteries (LIBs). Herein, a hierarchical cable‐like structure composed of CoP@C core?shell nanoparticles (NPs) encapsulated in one‐dimensional (1D) porous carbon framework intertwined with N‐doped carbon nanotubes (CoP@C?PCF/NCNTs) is synthesized by a self‐templating, self‐catalytic, and subsequent vapor‐phase phosphorization strategy. The unique nanoarchitecture regime provides multiple advantages. The 1D carbon framework allows for quick ion and electron access, maintaining the integrity and accommodating the volume change of the structure during repeated discharging/charging. The internal carbon shell can prevent the direct aggregation of CoP NPs on cycling. The external NCNTs on the surface supply a staggered conductive network to promote electrolyte penetration and charge transportation. Impressively, the as‐fabricated hybrid nanocables deliver a reversible capacity of 712 mAh g^?1 at 0.5 A g^?1 for over 700 cycles with excellent rate capability as an anode material for LIBs. The significantly improved lithium storage properties of CoP@C?PCF/NCNTs reveal the importance of reasonable design and engineering of novel hierarchical structures with higher complexity.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.     

Chemical Immobilization and Conversion of Active Polysulfides Directly by Copper Current Collector: A New Approach to Enabling Stable Room‐Temperature Li‐S and Na‐S Batteries

Room‐temperature Li/Na‐S batteries are promising energy storage solutions, but unfortunately suffer from serious cycling problems rooted in their polysulfide intermediates. The conventional strategy to tackle this issue is to design host materials for trapping polysulfides via weak physical confinement and interfacial chemical interactions. Even though beneficial, their capability for the polysulfide immobilization is still limited. Herein, the unique sulfiphilic nature of metallic Cu is revisited. Upon the exposure to polysulfide in aqueous or aprotic solution, the surface sulfidization rapidly takes place, resulting in the formation of Cu₂S nanoflake arrays with tunable texture. When the sulfidized Cu current collector is directly used as the sulfur‐equivalent cathode, it enables high‐performance Li/Na‐S batteries at room temperature with reasonable high sulfur loading. Specific capacities up to ≈1200 mAh g^?1 for Li‐S and ≈400 mAh g^?1 for Na‐S are measured when normalized to the amount of equivalent sulfur, and can be readily sustained for >1000 cycles.     

Long‐Life,High‐Rate Lithium–Sulfur Cells with a Carbon‐Free VN Host as an Efficient Polysulfide Adsorbent and Lithium Dendrite Inhibitor

Lithium–sulfur (Li‐S) batteries are a promising next‐generation energy‐storage system, but the polysulfide shuttle and dendritic Li growth seriously hinder their commercial viability. Most of the previous studies have focused on only one of these two issues at a time. To address both the issues simultaneously, presented here is a highly conductive, noncarbon, 3D vanadium nitride (VN) nanowire array as an efficient host for both sulfur cathodes and lithium‐metal anodes. With fast electron and ion transport and high porosity and surface area, VN traps the soluble polysulfides, promotes the redox kinetics of sulfur cathodes, facilitates uniform nucleation/growth of lithium metal, and inhibits lithium dendrite growth at an unprecedented high current density of 10 mA cm^?2 over 200 h of repeated plating/stripping. As a result, VN‐Li||VN‐S full cells constructed with VN as both an anode and cathode host with a negative to positive electrode capacity ratio of only ≈2 deliver remarkable electrochemical performance with a high Coulombic efficiency of ≈99.6% over 850 cycles at a high 4 C rate and a high areal capacity of 4.6 mA h cm^?2. The strategy presented here offers a viable approach to realize high‐energy‐density, safe Li‐metal‐based batteries.     

Synthesis and Electrochemical Activity of Some Na(Li)‐Rich Ruthenium Oxides with the Feasibility to Stabilize Ru6+

The capacity of Li‐ion cathode materials has recently been greatly improved by the feasibility to trigger both cationic and anionic redox reactions within the same material. This concept has rapidly been implemented to Na‐ion batteries to boost their energy density. The electrochemical properties of Na₃RuO₄ with Li₃RuO₄ are reported and compared herein. Strikingly, it is found that 3 Na can be extracted from Na₃RuO₄ with the charge compensation mechanism enlisting first the oxidation of Ru⁵⁺ to Ru⁶⁺, leading to Na₂RuO₄, and then the oxidation of oxygen during the rest of the charge. This drastically contrasts with the behavior of the Li counterpart since Ru never reaches that high oxidation state during lithium removal. By comparing the phase diagrams of A_xRuO₄ (A being Li, Na, or K) together with density functional theory calculations, this finding is rationalized and it is demonstrated that this difference is mainly rooted in the size of the alkali cation. The bigger the alkali, the lower the coordination of Ru will be, stabilized by the same higher oxidation states. This work highlights the difference between Li and Na materials toward anionic redox and suggests the unusual coexistence of Ru⁶⁺ and (O₂)^n?, hence setting new challenges to theoreticians and opening opportunities for materials design.     

Reliable and General Route to Inverse Opal Structured Nanohybrids of Carbon‐Confined Transition Metal Sulfides Quantum Dots for High‐Performance Sodium Storage

Sodium‐ion batteries (SIBs) have recently attracted increasing attention as the promising alternative to lithium‐ion batteries due to their multiple advantages of abundant reserves and low cost. However, the development of highly desirable anode materials suitable for SIBs is still hampered by a rather low capacity, poor rate capability, and cycling stability. Herein, a deliberate design to implement reliable and simple fabrication of an inverse opal structured nanohybrid of carbon‐confined various transition metal sulfides quantum dots (QDs) is presented. Comprehensive characterizations demonstrate that the hybrids hold a 3D architecture with uniform dispersion of QDs in a conductive carbon matrix that in turn encapsulates these quantum dots. With Co₉S₈ as an example, such a unique architecture, when applied as the anode of SIBs, endows the hybrids with multiple advantages including a high reversible specific capacity, extraordinary high rate capability, and excellent durability over 2000 cycles charging–discharging process.     

Popcorn Inspired Porous Macrocellular Carbon: Rapid Puffing Fabrication from Rice and Its Applications in Lithium–Sulfur Batteries

The advancement of electrochemical energy storage is closely bound up with the breakthrough of controllable fabrication of energy materials. Inspired by a popcorn fabrication from corn raw, herein a unique porous macrocellular carbon composed of cross‐linked nano/microsheets by a powerful puffing of rice precursor is described. The rice is directly puffed with a volume enlargement of ≈20 times when it is instantaneously released from a sealed environment with a high pressure of 1.0 MPa at 200 °C. Interestingly, when metal (e.g., Ni) nanoparticles are embedded in the puffed rice derived carbon (PRC), high‐quality PRC/metal composites are achieved with attractive properties of a high electrical conductivity of ≈7.2 × 10⁴ S m^?1, a large porosity of 85.1%, and a surface area of 1492.2 m² g^?1. The PRC/Ni are employed as a host in lithium–sulfur batteries. The designed PRC/Ni/S electrode exhibits a high reversible capacity of 1257.2 mA h g^?1 at 0.2 C, a prolonged cycle life (821 mA h g^?1 after 500 cycles), and enhanced rate capability, much better than other counterparts (PRC/S and rGO/S). The excellent properties are attributed to the advantages of PRC/Ni network with a high electrical conductivity, strong adsorption/blocking ability for polysulfides, and interconnected porous framework.     

A Novel Graphene Oxide Wrapped Na2Fe2(SO4)3/C Cathode Composite for Long Life and High Energy Density Sodium‐Ion Batteries

The cathode materials in the Na‐ion battery system are always the key issue obstructing wider application because of their relatively low specific capacity and low energy density. A graphene oxide (GO) wrapped composite, Na₂Fe₂(SO₄)₃@C@GO, is fabricated via a simple freeze‐drying method. The as‐prepared material can deliver a 3.8 V platform with discharge capacity of 107.9 mAh g^?1 at 0.1 C (1 C = 120 mA g^?1) as well as offering capacity retention above 90% at a discharge rate of 0.2 C after 300 cycles. The well‐constructed carbon network provides fast electron transfer rates, and thus, higher power density also can be achieved (75.1 mAh g^?1 at 10 C). The interface contribution of GO and Na₂Fe₂(SO₄)₃ is recognized and studied via density function theory calculation. The Na storage mechanism is also investigated through in situ synchrotron X‐ray diffraction, and pseudocapacitance contributions are also demonstrated. The diffusion coefficient of Na⁺ ions is around 10^?12–10^?10.8 cm² s^?1 during cycling. The higher working voltage of this composite is mainly ascribed to the larger electronegativity of the element S. The research indicates that this well‐constructed composite would be a competitive candidate as a cathode material for Na‐ion batteries.