Metal Sulfide‐Decorated Carbon Sponge as a Highly Efficient Electrocatalyst and Absorbant for Polysulfide in High‐Loading Li2S Batteries

Owing to its high theoretical specific capacity (1166 mA h g^?1) and particularly its advantage to be paired with a lithium‐metal‐free anode, lithium sulfide (Li₂S) is regarded as a much safer cathode for next‐generation advanced lithium–sulfur (Li–S) batteries. However, the low conductivity of Li₂S and particularly the severe “polysulfide shuttle” of lithium polysulfide (LiPS) dramatically hinder their practical application in Li–S batteries. To address such issues, herein a bifuctional 3D metal sulfide‐decorated carbon sponge (3DTSC), which is constructed by 1D carbon nanowires cross‐linked with 2D graphene nanosheets with high conductivity and polar 0D metal sulfide nanodots with efficient electrocatalytic activity and strong chemical adsorption capability for LiPSs, is presented. Benefiting from the well‐designed multiscale, multidimensional 3D porous nanoarchitecture with high conductivity, and efficient electrocatalytic and absorption ability, the 3DTSC significantly mitigates LiPS shuttle, improves the utilization of Li₂S, and facilitates the transport of electrons and ions. As a result, even with a high Li₂S loading of 8 mg cm^?2, the freestanding 3DTSC‐Li₂S cathode without a polymer binder and metallic current collector delivers outstanding electrochemical performance with a high areal capacity of 8.44 mA h cm^?2.     

Rationalizing Electrocatalysis of Li–S Chemistry by Mediator Design: Progress and Prospects

The lithium–sulfur (Li–S) battery is regarded as a next‐generation energy storage system due to its conspicuous merits in high theoretical capacity (1672 mAh g^?1), overwhelming energy density (2600 Wh kg^?1), and the cost‐effectiveness of sulfur. However, the practical application of Li–S batteries is still handicapped by a multitude of key challenges, mainly pertaining to fatal lithium polysulfide (LiPS) shuttling and sluggish sulfur redox kinetics. In this respect, rationalizing electrocatalytic processes in Li–S chemistry to synergize the entrapment and conversion of LiPSs is of paramount significance. This review summarizes recent progress and well‐developed strategies of the mediator design toward promoted Li–S chemistry. The current advances, existing challenges, and future directions are accordingly highlighted, aiming at providing in‐depth understanding of the sulfur reaction mechanism and guiding the rational mediator design to realize high‐energy and long‐life Li–S batteries.     

High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Safety and the polysulfide shuttle reaction are two major challenges for liquid electrolyte lithium–sulfur (Li–S) batteries. Although use of solid‐state electrolytes can overcome these two challenges, it also brings new challenges by increasing the interface resistance and stress/strain. In this work, the interface resistance and stress/strain of sulfur cathodes are significantly reduced by conformal coating ≈2 nm sulfur (S) onto reduced graphene oxide (rGO). An Li–S full cell consisting of an rGO@S‐Li₁₀GeP₂S₁₂‐acetylene black (AB) composite cathode is evaluated. At 60 °C, the all‐solid‐state Li–S cell demonstrates a similar electrochemical performance as in liquid organic electrolyte, with high rate capacities of 1525.6, 1384.5, 1336.3, 903.2, 502.6, and 204.7 mA h g^?1 at 0.05, 0.1, 0.5, 1.0, 2.0, and 5.0 C, respectively. It can maintain a high and reversible capacity of 830 mA h g^?1 at 1.0 C for 750 cycles. The uniform distribution of the rGO@S nanocomposite in the Li₁₀GeP₂S₁₂‐AB matrix generates uniform volume changes during lithiation/delithiation, significantly reducing the stress/strain, thus extending the cycle life. Minimization of the stress/strain of solid cells is the key for a long cycle life of all‐solid‐state Li–S batteries.     

Polysulfide‐Shuttle Control in Lithium‐Sulfur Batteries with a Chemically/Electrochemically Compatible NaSICON‐Type Solid Electrolyte

A NaSICON‐type Li⁺‐ion conductive membrane with a formula of Li_{1+ x} Y _x Zr_{2? x} (PO₄)₃ (LYZP) (x = 0–0.15) has been explored as a solid‐electrolyte/separator to suppress polysulfide‐crossover in lithium‐sulfur (Li‐S) batteries. The LYZP membrane with a reasonable Li⁺‐ion conductivity shows both favorable chemical compatibility with the lithium polysulfide species and exhibits good electrochemical stability under the operating conditions of the Li‐S batteries. Through an integration of the LYZP solid electrolyte with the liquid electrolyte, the hybrid Li‐S batteries show greatly enhanced cyclability in contrast to the conventional Li‐S batteries with the porous polymer (e.g., Celgard) separator. At a rate of C/5, the hybrid Li ||LYZP|| Li₂S₆ batteries developed in this study (with a Li‐metal anode, a liquid/LYZP hybrid electrolyte, and a dissolved lithium polysulfide cathode) delivers an initial discharge capacity of ≈1000 mA h g^?1 (based on the active sulfur material) and retains ≈90% of the initial capacity after 150 cycles with a low capacity fade‐rate of <0.07% per cycle.     

Hybrid Lithium‐Sulfur Batteries with an Advanced Gel Cathode and Stabilized Lithium‐Metal Anode

The insulating nature of sulfur, polysulfide shuttle effect, and lithium‐metal deterioration cause a decrease in practical energy density and fast capacity fade in lithium‐sulfur (Li‐S) batteries. This study presents an integrated strategy for the development of hybrid Li‐S batteries based on a gel sulfur cathode, a solid electrolyte, and a protective anolyte composed of a highly concentrated salt electrolyte containing mixed additives. The dense solid electrolyte completely blocks polysulfide diffusion, and also makes it possible to investigate the cathode and anode independently. This gel cathode effectively traps the polysulfide active material while maintaining a low electrolyte to sulfur ratio of 5.2 mL g^?1. The anolyte effectively protects the Li metal and suppresses the consumption of liquid electrolyte, enabling stable long‐term cycling for over 700 h in Li symmetric cells. This advanced design can simultaneously suppress the polysulfide shuttle, protect Li metal, and reduce the liquid electrolyte usage. The assembled hybrid batteries exhibit remarkably stable cycling performance over 300 cycles with high capacity. Finally, surface‐sensitive techniques are carried out to directly visualize and probe the interphase formed on the surface of the Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP) pellet, which may help stabilize the solid–liquid interface.     

Highly Solvating Electrolytes for Lithium–Sulfur Batteries

There is a critical need to evaluate lithium–sulfur (Li–S) batteries with practically relevant high sulfur loadings and minimal electrolyte. Under such conditions, the concentration of soluble polysulfide intermediates in the electrolyte drastically increases, which can alter the fundamental nature of the solution‐mediated discharge and thereby the total sulfur utilization. In this work, an investigation into various high donor number (DN) electrolytes that allow for increased polysulfide dissolution is presented, and the way in which this property may in fact be necessary for increasing sulfur utilization at low electrolyte and high loading conditions is demonstrated. The solvents dimethylacetamide, dimethyl sulfoxide, and 1‐methylimidazole are holistically evaluated against dimethoxyethane as electrolyte co‐solvents in Li–S cells, and they are used to investigate chemical and electrochemical properties of polysulfide species at both dilute and practically relevant conditions. The nature of speciation exhibited by lithium polysulfides is found to vary significantly between these concentrations, particularly with regard to the S₃^?? species. Furthermore, the extent of the instability in conventional electrolyte solvents and high DN solvents with both lithium metal and polysulfides is thoroughly investigated. These studies establish a basis for future efforts into rationally designing an optimal electrolyte for a lean electrolyte, high energy density Li–S battery.     

Synergistic Engineering of Defects and Architecture in Binary Metal Chalcogenide toward Fast and Reliable Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have great promise to support the next‐generation energy storage if their sluggish redox kinetics and polysulfide shuttling can be addressed. The rational design of sulfur electrodes plays key roles in tacking these problems and achieving high‐efficiency sulfur electrochemistry. Herein, a synergetic defect and architecture engineering strategy to design highly disordered spinel Ni–Co oxide double‐shelled microspheres (NCO‐HS), which consist of defective spinel NiCo₂O_4–x (x = 0.9 if all nickel is Ni²⁺ and cobalt is Co^2.13+), as the multifunctional sulfur host material is reported. The in situ constructed cation and anion defects endow the NCO‐HS with significantly enhanced electronic conductivity and superior polysulfide adsorbability. Meanwhile, the delicate nanoconstruction offers abundant active interfaces and reduced ion diffusion pathways for efficient Li–S chemistry. Attributed to these synergistic features, the sulfur composite electrode achieves excellent rate performance up to 5 C, remarkable cycling stability over 800 cycles and good areal capacity of 6.3 mAh cm^?2 under high sulfur loading. This proposed strategy based on synergy engineering could also inform material engineering in related energy storage and conversion fields.     

Polysulfide Confinement and Highly Efficient Conversion on Hierarchical Mesoporous Carbon Nanosheets for Li–S Batteries

Lithium–sulfur (Li–S) batteries have attracted increasing attention due to their extremely high theoretical specific capacity and a promising power density. However, practical applications of Li–S batteries are still limited by the relatively low performance, owing to poor conductivity of sulfur itself and discharge products (Li₂S/Li₂S₂) as well as the shuttle effect of the intermediate polysulfide. Herein, honeycomb‐like mesoporous Co, N‐doped carbon nanosheets (MC‐NS) with a high specific surface area and abundant defects are developed which, simultaneously enable polysulfide confinement and highly efficient conversion. Moreover, density functional theory calculations and experiments show that the Co‐N‐C catalytic site as well as defects on the carbon skeleton of the MC‐NS facilitate high efficiency in suppressing the shuttle effect of polysulfides. In situ Raman spectra further demonstrate the enhancement of adsorption ability and conversion efficiency of polysulfides on this host. As a result, the MC‐NS enables much increased specific capacity and cycling stability of Li–S batteries. This work provides a useful strategy for realizing practical applications of high‐performance Li–S batteries.     

Ultrafine Co3Se4 Nanoparticles in Nitrogen‐Doped 3D Carbon Matrix for High‐Stable and Long‐Cycle‐Life Lithium Sulfur Batteries

Lithium–sulfur batteries are a promising high energy output solution for substitution of traditional lithium ion batteries. In recent times research in this field has stepped into the exploration of practical applications. However, their applications are impeded by cycling stability and short life‐span mainly due to the notorious polysulfide shuttle effect. In this work, a multifunctional sulfur host fabricated by grafting highly conductive Co₃Se₄ nanoparticles onto the surface of an N‐doped 3D carbon matrix to inhibit the polysulfide shuttle and improve the sulfur utilization is proposed. By regulating the carbon matrix and the Co₃Se₄ distribution, N‐CN‐750@Co₃Se₄‐0.1 m with abundant polar sites is experimentally and theoretically shown to be a good LiPSs absorbent and a sulfur conversion accelerator. The S/N‐CN‐750@Co₃Se₄‐0.1 m cathode shows excellent sulfur utilization, rate performance, and cyclic durability. A prolonged cycling test of the as‐fabricated S/N‐CN‐750@Co₃Se₄‐0.1 m cathode is carried out at 0.2 C for more than 5 months which delivers a high initial capacity of 1150.3 mAh g^?1 and retains 531.0 mAh g^?1 after 800 cycles with an ultralow capacity reduction of 0.067% per cycle, maintaining Coulombic efficiency of more than 99.3%. The reaction details are characterized and analyzed by ex situ measurements. This work highly emphasizes the potential capabilities of transition‐metal selenides in lithium–sulfur batteries.     

Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) battery is a next generation high energy density battery, but its practical application is hindered by the poor cycling stability derived from the severe shuttling of lithium polysulfides (LiPSs). Catalysis is a promising way to solve this problem, but the rational design of relevant catalysts is still hard to achieve. This paper reports the WS₂–WO₃ heterostructures prepared by in situ sulfurization of WO₃, and by controlling the sulfurization degree, the structure is controlled, which balances the trapping ability (by WO₃) and catalytic activity (by WS₂) toward LiPSs. As a result, the WS₂–WO₃ heterostructures effectively accelerate LiPS conversion and improve sulfur utilization. The Li–S battery with 5 wt% WS₂–WO₃ heterostructures as additives in the cathode shows an excellent rate performance and good cycling stability, revealing a 0.06% capacity decay each cycle over 500 cycles at 0.5 C. By building an interlayer with such heterostructure‐added graphenes, the battery with a high sulfur loading of 5 mg cm^?2 still shows a high capacity retention of 86.1% after 300 cycles at 0.5 C. This work provides a rational way to prepare the metal oxide–sulfide heterostructures with an optimized structure to enhance the performance of Li–S batteries.     

Long‐Life,High‐Rate Lithium–Sulfur Cells with a Carbon‐Free VN Host as an Efficient Polysulfide Adsorbent and Lithium Dendrite Inhibitor

Lithium–sulfur (Li‐S) batteries are a promising next‐generation energy‐storage system, but the polysulfide shuttle and dendritic Li growth seriously hinder their commercial viability. Most of the previous studies have focused on only one of these two issues at a time. To address both the issues simultaneously, presented here is a highly conductive, noncarbon, 3D vanadium nitride (VN) nanowire array as an efficient host for both sulfur cathodes and lithium‐metal anodes. With fast electron and ion transport and high porosity and surface area, VN traps the soluble polysulfides, promotes the redox kinetics of sulfur cathodes, facilitates uniform nucleation/growth of lithium metal, and inhibits lithium dendrite growth at an unprecedented high current density of 10 mA cm^?2 over 200 h of repeated plating/stripping. As a result, VN‐Li||VN‐S full cells constructed with VN as both an anode and cathode host with a negative to positive electrode capacity ratio of only ≈2 deliver remarkable electrochemical performance with a high Coulombic efficiency of ≈99.6% over 850 cycles at a high 4 C rate and a high areal capacity of 4.6 mA h cm^?2. The strategy presented here offers a viable approach to realize high‐energy‐density, safe Li‐metal‐based batteries.     

Updated Metal Compounds (MOFs, ?S, ?OH, ?N, ?C) Used as Cathode Materials for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have the potential to be as efficient and as widespread as lithium‐ion (Li‐ion) batteries, since sulfur electrode has high theoretical capacity (1672 mA h g_sul^?1) and this element is affordable. However, unlike their ubiquitous lithium ion (Li‐ion) counterparts, it is difficult to realize the commercialization of Li‐S battery. Because the shuttle effect of polysulfide inevitably results in the serious capacity degradation. Tremendous progress is devoted to approach this problem from the aspect of physical confinement and chemisorption of polysulfide. Owing to weak intermolecular interactions, physical confinement strategy, however is not effective when the battery is cycled long‐term. Chemisorption of polysulfide that derived from polar–polar interaction, Lewis acid–base interaction, and sulfur‐chain catenation, are proven to significantly suppress the shuttle effect of polysulfide. It is also discovered that the metal compounds have strong chemical interactions with polysulfide. Therefore, this review focuses on latest metal–organic frameworks metal sulfides, metal hydroxides, metal nitrides, metal carbides, and discusses how the chemical interactions couple with the unique properties of these metal compounds to tackle the problem of polysulfide shuttle effect.     

Porphyrin‐Derived Graphene‐Based Nanosheets Enabling Strong Polysulfide Chemisorption and Rapid Kinetics in Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries hold great promise as a next‐generation battery system because of their extremely high theoretical energy density and low cost. However, ready lithium polysulfide (LiPS) diffusion and sluggish redox kinetics hamper their cyclability and rate capability. Herein, porphyrin‐derived graphene‐based nanosheets (PNG) are proposed for Li–S batteries, which are achieved by pyrolyzing a conformal and thin layer of 2D porphyrin organic framework on graphene to form carbon nanosheets with a spatially engineered nitrogen‐dopant‐enriched skin and a highly conductive skeleton. The atomic skin is decorated with fully exposed lithiophilic sites to afford strong chemisorption to LiPSs and improve electrolyte wettability, while graphene substrate provides speedy electron transport to facilitate redox kinetics of sulfur species. The use of PNG as a lightweight interlayer enables efficient operation of Li–S batteries in terms of superb cycle stability (cyclic decay rate of 0.099% during 300 cycles at 0.5 C), good rate capability (988 mAh g^?1 at 2.0 C), and impressive sulfur loading (areal capacity of 8.81 mAh cm^?2 at a sulfur loading of 8.9 mg cm^?2). The distinct interfacial strategy is expected to apply to other conversion reaction batteries relying on dissolution–precipitation mechanisms and requiring interfacial charge‐ and mass‐transport‐mediation concurrently.     

A Conductive Molecular Framework Derived Li2S/N,P‐Codoped Carbon Cathode for Advanced Lithium–Sulfur Batteries

Li₂S is one of the most promising cathode materials for Li‐ion batteries because of its high theoretical capacity and compatibility with Li‐metal‐free anode materials. However, the poor conductivity and electrochemical reactivity lead to low initial capacity and severe capacity decay. In this communication, a nitrogen and phosphorus codoped carbon (N,P–C) framework derived from phytic acid doped polyaniline hydrogel is designed to support Li₂S nanoparticles as a binder‐free cathode for Li–S battery. The porous 3D architecture of N and P codoped carbon provides continuous electron pathways and hierarchically porous channels for Li ion transport. Phosphorus doping can also suppress the shuttle effect through strong interaction between sulfur and the carbon framework, resulting in high Coulombic efficiency. Meanwhile, P doping in the carbon framework plays an important role in improving the reaction kinetics, as it may help catalyze the redox reactions of sulfur species to reduce electrochemical polarization, and enhance the ionic conductivity of Li₂S. As a result, the Li₂S/N,P–C composite electrode delivers a stable capacity of 700 mA h g^?1 with average Coulombic efficiency of 99.4% over 100 cycles at 0.1C and an areal capacity as high as 2 mA h cm^?2 at 0.5C.     

Rational Design of a Dual‐Function Hybrid Cathode Substrate for Lithium–Sulfur Batteries

A unique 3D hybrid sponge with chemically coupled nickel disulfide‐reduced graphene oxide (NiS₂‐RGO) framework is rationally developed as an effective polysulfide reservoir through a biomolecule‐assisted self‐assembly synthesis. An optimized amount of NiS₂ (≈18 wt%) with porous nanoflower‐like morphology is uniformly in situ grown on the RGO substrate, providing abundant active sites to adsorb and localize polysulfides. The improved polysulfide adsorptivity from sulfiphilic NiS₂ is confirmed by experimental data and first‐principle calculations. Moreover, due to the chemical coupling between NiS₂ and RGO formed during the in situ synthesis, the conductive RGO substrate offers a 3D electron pathway to facilitate charge transfer toward the NiS₂‐polysulfide adsorption interface, triggering a fast redox kinetics of polysulfide conversion and excellent rate performance (C/20–4C). Therefore, the self‐assembled hybrid structure simultaneously promotes static polysulfide‐trapping capability and dynamic polysulfide‐conversion reversibility. As a result, the 3D porous sponge enables a high sulfur content (75 wt%) and a remarkably high sulfur loading (up to 21 mg cm^?2) and areal capacity (up to 16 mAh cm^?2), exceeding most of the reported values in the literature involving either RGO or metal sulfides/other metal compounds (sulfur content of <60 wt% and sulfur loading of <3 mg cm^?2).     

A Metal Organic Framework Derived Solid Electrolyte for Lithium–Sulfur Batteries

Lithium–sulfur batteries (LSBs) are currently considered as promising candidates for next‐generation energy storage technologies. However, their practical application is hindered by the critical issue of the polysulfide‐shuttle. Herein, a metal organic framework (MOF)‐derived solid electrolyte is presented to address it. The MOF solid electrolyte is developed based on a Universitetet i Oslo (UIO) structure. By grafting a lithium sulfonate (‐SO₃Li) group to the UIO ligand, both the ionic conductivity and the polysulfide‐suppression capability of the resulting ‐SO₃Li grafted UIO (UIOSLi) solid electrolyte are greatly improved. After integrating a Li‐based ionic liquid (Li‐IL), lithium bis(trifluoromethanesulfonyl)imide in 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, the resulting Li‐IL/UIOSLi solid electrolyte exhibits an ionic conductivity of 3.3 × 10^?4 S cm^?1 at room temperature. Based on its unique structure, the Li‐IL/UIOSLi solid electrolyte effectively restrains the polysulfide shuttle and suppresses lithium dendritic growth. Lithium–sulfur cells with the Li‐IL/UIOSLi solid electrolyte and a Li₂S₆ catholyte show stable cycling performance that preserves 84% of the initial capacity after 250 cycles with a capacity‐fade rate of 0.06% per cycle.     

Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering

The altering of electronic states of metal oxides offers a promising opportunity to realize high‐efficiency surface catalysis, which play a key role in regulating polysulfides (PS) redox in lithium–sulfur (Li–S) batteries. However, little effort has been devoted to understanding the relationship between the electronic state of metal oxides and a catalyst's properties in Li–S cells. Herein, defect‐rich heterojunction electrocatalysts composed of ultrathin TiO_2‐x nanosheets and carbon nanotubes (CNTs) for Li–S batteries are reported. Theoretical simulations indicate that oxygen vacancies and heterojunction can enhance electronic conductivity and chemical adsorption. Spectroscopy and electrochemical techniques further indicate that the rich surface vacancies in TiO_2‐x nanosheets result in highly activated trapping sites for LiPS and lower energy barriers for fast Li ion mobility. Meanwhile, the redistribution of electrons at the heterojunction interfaces realizes accelerated surface electron exchange. Coupled with a polyacrylate terpolymer (LA132) binder, the CNT@TiO_2‐x–S electrodes exhibit a long cycle life of more than 300 cycles at 1 C and a high area capacity of 5.4 mAh cm^?2. This work offers a new perspective on understanding catalyst design in energy storage devices through band engineering.     

Updated Metal Compounds (MOFs, S, OH, N, C) Used as Cathode Materials for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have the potential to be as efficient and as widespread as lithium‐ion (Li‐ion) batteries, since sulfur electrode has high theoretical capacity (1672 mA h g_sul^?1) and this element is affordable. However, unlike their ubiquitous lithium ion (Li‐ion) counterparts, it is difficult to realize the commercialization of Li‐S battery. Because the shuttle effect of polysulfide inevitably results in the serious capacity degradation. Tremendous progress is devoted to approach this problem from the aspect of physical confinement and chemisorption of polysulfide. Owing to weak intermolecular interactions, physical confinement strategy, however is not effective when the battery is cycled long‐term. Chemisorption of polysulfide that derived from polar–polar interaction, Lewis acid–base interaction, and sulfur‐chain catenation, are proven to significantly suppress the shuttle effect of polysulfide. It is also discovered that the metal compounds have strong chemical interactions with polysulfide. Therefore, this review focuses on latest metal–organic frameworks metal sulfides, metal hydroxides, metal nitrides, metal carbides, and discusses how the chemical interactions couple with the unique properties of these metal compounds to tackle the problem of polysulfide shuttle effect.     

Separator Modified by Cobalt‐Embedded Carbon Nanosheets Enabling Chemisorption and Catalytic Effects of Polysulfides for High‐Energy‐Density Lithium‐Sulfur Batteries

Lithium‐sulfur (Li‐S) batteries are considered to be one of the promising next‐generation energy storage systems. Considerable progress has been achieved in sulfur composite cathodes, but high cycling stability and discharging capacity at the expense of volumetric capacity have offset their advantages. Herein, a functional separator is presented by coating cobalt‐embedded nitrogen‐doped porous carbon nanosheets and graphene on one surface of a commercial polypropylene separator. The coating layer not only suppresses the polysulfide shuttle effect through chemical affinity, but also functions as an electrocatalyst to propel catalytic conversion of intercepted polysulfides. The slurry‐bladed carbon nanotubes/sulfur cathode with 90 wt% sulfur deliver high reversible capacity of 1103 mA h g^?1 and volumetric capacity of 1062 mA h cm^?3 at 0.2 C, and the freestanding carbon nanofibers/sulfur cathode provides a high discharging capacity of 1190 mA h g^?1 and volumetric capacity of 1136 mA h cm^?3 at high sulfur content of 78 wt% and sulfur loading of 10.5 mg cm^?2. The electrochemical performance is comparable with or even superior to those in the state‐of‐the‐art carbon‐based sulfur cathodes. The separator reported in this work holds great promise for the development of high‐energy‐density Li‐S batteries.     

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

The detrimental shuttle effect in lithium–sulfur batteries mainly results from the mobility of soluble polysulfide intermediates and their sluggish conversion kinetics. Herein, presented is a multifunctional catalyst with the merits of strong polysulfides adsorption ability, superior polysulfides conversion activity, high specific surface area, and electron conductivity by in situ crafting of the TiO₂‐MXene (Ti₃C₂T_x) heterostructures. The uniformly distributed TiO₂ on MXene sheets act as capturing centers to immobilize polysulfides, the hetero‐interface ensures rapid diffusion of anchored polysulfides from TiO₂ to MXene, and the oxygen‐terminated MXene surface is endowed with high catalytic activity toward polysulfide conversion. The improved lithium–sulfur batteries deliver 800 mAh g^?1 at 2 C and an ultralow capacity decay of 0.028% per cycle over 1000 cycles at 2 C. Even with a high sulfur loading of 5.1 mg cm^?2, the capacity retention of 93% after 200 cycles is still maintained. This work sheds new insights into the design of high‐performance catalysts with manipulated chemical components and tailored surface chemistry to regulate polysulfides in Li–S batteries.