Ionogel Electrolytes for High‐Performance Lithium Batteries: A Review

Ionic liquids (ILs) are important electrolytes for applications in electrochemical devices. An emerging trend in ILs research is their hybridization with solid matrices, named ionogels. These ionogels can not only overcome the fluidity of ILs but also exhibit high mechanical strength of the solid matrix. Therefore, they show promise for applications in building lithium batteries. In this review, various types of solid matrices for confining ILs are summarized, including nonmetallic oxides, metal oxides, IL‐tethered nanoparticles, functionalized SiO₂, metal–organic frameworks, and other structural materials. The synthetic strategies for ionogels are first documented, focusing on physical confinement and covalent grafting. Then, the structure, ionic conductivity, thermal stability, and electrochemical stability of ionogels are addressed in detail. Furthermore, the authors highlight the potential applications of state‐of‐art ionogels in lithium batteries. The authors conclude this review by outlining the remaining challenges as well as personal perspectives on this hot area of research.     

Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

Secondary batteries based on metal anodes (e.g., Li, Na, Mg, Zn, and Al) are among the most sought‐after candidates for next‐generation mobile and stationary storage systems because they are able to store a larger amount of energy per unit mass or volume. However, unstable electrodeposition and uncontrolled interfacial reactions occuring in liquid electrolytes cause unsatisfying cell performance and potential safety concerns for the commercial application of these metal anodes. Solid‐state electrolytes (SSEs) having a higher modulus are considered capable of inhibiting difficulties associated with the anodes and may enable building of safe all‐solid‐state metal batteries, yet several challenges, such as insufficient room‐temperature ionic conductivity and poor interfacial stability between the electrode and the electrolyte, hinder the large‐scale development of such batteries. Here, research and development of SSEs including inorganic ceramics, organic solid polymers, and organic–inorganic hybrid/composite materials for metal‐based batteries are reviewed. The comparison of different types of electrolytes is discussed in detail, in the context of electrochemical energy storage applications. Then, the focus of this study is on recent advances in a range of attractive and innovative battery chemistries and technologies that are enabled by SSEs. Finally, the challenges and future perspectives are outlined to foresee the development of SSEs.     

Interfacial Incompatibility and Internal Stresses in All‐Solid‐State Lithium Ion Batteries

Rechargeable Li‐ion batteries (LIBs) are electrochemical storage device widely applied in electric vehicles, mobile electronic devices, etc. However, traditional LIBs containing liquid electrolytes suffer from flammability, poor electrochemical stability, and limited operational temperature range. Replacement of the liquid electrolytes with inorganic solid‐state electrolytes (SSEs) would solve this problem. However, several critical issues, such as poor interfacial compatibility, low ionic conductivity at ambient temperatures, etc., need to be surmounted before the commercialization of all‐solid‐state Li‐ion batteries (ASSLIBs). In this review, a brief historical context for the inorganic SSEs is described first. Then, two critical issues in the ASSLIBs are highlighted: interfacial incompatibility of the electrodes and SSEs and internal stresses. For the interfacial incompatibility, the discussion is focused on the dynamic characterization of the electrode/SSE interfaces, the origin and evolution of the interfacial resistance, and interface engineering to minimize the interfacial resistance. The internal stresses in the ASSLIBs are another major concern because rigid contacts are introduced. Stress generation, stress evolution during battery cycling, stress measurement/simulation, and ways to alleviate the stresses are outlined in detail. Finally, current challenges and perspectives for future development of the inorganic SSEs and ASSLIBs are outlined.     

A Lithium Amide‐Borohydride Solid‐State Electrolyte with Lithium‐Ion Conductivities Comparable to Liquid Electrolytes

High ionic conductivity of up to 6.4 × 10^?3 S cm^?1 near room temperature (40 °C) in lithium amide‐borohydrides is reported, comparable to values of liquid organic electrolytes commonly employed in lithium‐ion batteries. Density functional theory is applied coupled with X‐ray diffraction, calorimetry, and nuclear magnetic resonance experiments to shed light on the conduction mechanism. A Li₄Ti₅O₁₂ half‐cell battery incorporating the lithium amide‐borohydride electrolyte exhibits good rate performance up to 3.5 mA cm^?2 (5 C) and stable cycling over 400 cycles at 1 C at 40 °C, indicating high bulk and interfacial stability. The results demonstrate the potential of lithium amide‐borohydrides as solid‐state electrolytes for high‐power lithium‐ion batteries.     

Solid‐State Prelithiation Enables High‐Performance Li‐Al‐H Anode for Solid‐State Batteries

Lithium alanates exhibit high theoretical specific capacities and appropriate lithiation/delithiation potentials, but suffer from poor reversibility, cycling stability, and rate capability due to their sluggish kinetics and extensive side reactions. Herein, a novel and facile solid‐state prelithiation approach is proposed to in situ prepare a Li₃AlH₆‐Al nanocomposite from a short‐circuited electrochemical reaction between LiAlH₄ and Li with the help of fast electron and Li‐ion conductors (C and P6₃mc LiBH₄). This nanocomposite consists of dispersive Al nanograins and an amorphous Li₃AlH₆ matrix, which enables superior electrochemical performance in solid‐state cells, as much higher specific capacity (2266 mAh g^?1), Coulombic efficiency (88%), cycling stability (71% retention in the 100th cycle), and rate capability (1429 mAh g^?1 at 1 A g^?1) are achieved. In addition, this nanocomposite works well in the solid‐state full cell with LiCoO₂ cathode, demonstrating its promising application prospects. Mechanism analysis reveals that the dispersive Al nanograins and amorphous Li₃AlH₆ matrix can dramatically enhance the lithiation and delithiation kinetics without side reactions, which is mainly responsible for the excellent overall performance. Moreover, this solid‐state prelithiation approach is general and can also be applied to other Li‐poor electrode materials for further modification of their electrochemical behavior.     

Incorporating Solvate and Solid Electrolytes for All‐Solid‐State Li2S Batteries with High Capacity and Long Cycle Life

The development of all‐solid‐state lithium–sulfur batteries is hindered by the poor interfacial properties at solid electrolyte (SE)/electrode interfaces. The interface is modified by employing the highly concentrated solvate electrolyte, (MeCN)₂?LiTFSI:TTE, as an interlayer material at the electrolyte/electrode interfaces. The incorporation of an interlayer significantly improves the cycling performance of solid‐state Li₂S batteries compared to the bare counterpart, exhibiting a specific capacity of 760 mAh g^?1 at cycle 100 (330 mAh g^?1 for the bare cell). Electrochemical impedance spectroscopy shows that the interfacial resistance of the interlayer‐modified cell gradually decreases as a function of cycle number, while the impedance of the bare cell remains almost constant. Cross‐section scanning electron microscopy (SEM)/ energy dispersive X‐ray spectroscopy (EDS) measurements on the interlayer‐modified cell confirm the permeation of solvate into the cathode and the SE with electrochemical cycling, which is related to the decrease in cell impedance. In order to mimic the full permeation of the solvate across the entire cell, the solvate is directly mixed with the SE to form a “solvSEM” electrolyte. The hybrid Li₂S cell using a solvSEM electrolyte exhibits superior cycling performance compared to the solid‐state cells, in terms of Li₂S loading, Li₂S utilization, and cycling stability. The improved performance is due to the favorable ionic contact at the battery interfaces.     

New Na‐Ion Solid Electrolytes Na4−xSn1−xSbxS4 (0.02 ≤ x ≤ 0.33) for All‐Solid‐State Na‐Ion Batteries

Sulfide Na‐ion solid electrolytes (SEs) are key to enable room‐temperature operable all‐solid‐state Na‐ion batteries that are attractive for large‐scale energy storage applications. To date, few sulfide Na‐ion SEs have been developed and most of the SEs developed contain P and suffer from poor chemical stability. Herein, discovery of a new structural class of tetragonal Na_4?xSn_1?xSb_xS₄ (0.02 ≤ x ≤ 0.33) with space group I4₁/acd is described. The evolution of a new phase, distinctly different from Na₄SnS₄ or Na₃SbS₄, allows fast ionic conduction in 3D pathways (0.2–0.5 mS cm^?1 at 30 °C). Moreover, their excellent air stability and reversible dissolution in water and precipitation are highlighted. Specifically, TiS₂/Na–Sn all‐solid‐state Na‐ion batteries using Na_3.75Sn_0.75Sb_0.25S₄ demonstrates high capacity (201 mA h (g of TiS₂)^?1) with excellent reversibility.     

Mixed Phase Solid‐State Plastic Crystal Electrolytes Based on a Phosphonium Cation for Sodium Devices

Na batteries are seen as a feasible alternative technology to lithium ion batteries due to the greater abundance of sodium and potentially similar electrochemical behavior. In this work, mixed phase electrolyte materials based on solid‐state compositions of a tri methylisobutylphosphonium (P_111i4) bis(tri fluromethanesulphonyl)amide (NTf₂) organic ionic plastic crystal (OIPC) and high concentration of NaNTf₂ that support safe, sodium metal electrochemistry are demonstrated. A Na symmetric cell can be cycled efficiently, even in the solid state (at 50 °C and 60 °C), for a 25 mol% (P_111i4NTf₂)–75 mol% NaNTf₂ composition at 0.1 mA cm^?2 for 100 cycles. Thus, these mixed phase materials can be potentially used in Na‐based devices under moderate temperature conditions. It is also investigated that the phase behavior, conductivity, and electrochemical properties of mixtures of NaNTf₂ with this OIPC. It is observed that these mixtures have complex phase behavior. For high compositions of the Na salt, the materials are solid at room temperature and retain a soft solid consistency even at 50 °C with remarkably high conductivity, approaching that of the pure ionic liquid at 50 °C, i.e., 10^?3–10^?2 S cm^?1.     

Design Strategies,Practical Considerations,and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Owing to the ever‐increasing safety concerns about conventional lithium‐ion batteries, whose applications have expanded to include electric vehicles and grid‐scale energy storage, batteries with solidified electrolytes that utilize nonflammable inorganic materials are attracting considerable attention. In particular, owing to their superionic conductivities (as high as ≈10^?2 S cm^?1) and deformability, sulfide materials as the solid electrolytes (SEs) are considered the enabling material for high‐energy bulk‐type all‐solid‐state batteries. Herein the authors provide a brief review on recent progress in sulfide Li‐ and Na‐ion SEs for all‐solid‐state batteries. After the basic principles in designing SEs are considered, the experimental exploration of multicomponent systems and ab initio calculations that accelerate the search for stronger candidates are discussed. Next, other issues and challenges that are critical for practical applications, such as instability in air, electrochemical stability, and compatibility with active materials, are discussed. Then, an emerging progress in liquid‐phase synthesis and solution process of SEs and its relevant prospects in ensuring intimate ionic contacts and fabricating sheet‐type electrodes is highlighted. Finally, an outlook on the future research directions for all‐solid‐state batteries employing sulfide superionic conductors is provided.     

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

All‐solid‐state sodium metal batteries (SSMBs) are of great interest for their high theoretical capacity, nonflammability, and relatively low cost owing partially to the abundance of sodium recourses. However, it is challenging to fabricate SSMBs because compared with their counterparts, which contain lithium metal, sodium metal is mechanically softer and more reactive toward the electrolyte. Herein, the synthesis and electrochemical properties of newly designed sodium‐containing hybrid network solid polymer electrolytes (SPEs) and their application in SSMBs are reported. The hybrid network is synthesized by controlled crosslinking of octakis(3‐glycidyloxypropyldimethylsiloxy)octasilsesquioxane and amine‐terminated polyethylene glycol in existence with sodium perchlorate (NaClO₄). Plating and stripping experiments using symmetric cells show prolonged cycle life of the SPEs, >5150 and 3550 h at current density of 0.1 and 0.5 mA cm^?2, respectively. The results for the first time show that the SPE|sodium metal interface migrates into the SPE phase upon cycling. SSMBs fabricated with the hybrid SPE sandwiched between sodium metal anode and bilayered δ‐Na_xV₂O₅ cathode exhibit record‐high specific capacity for solid sodium‐ion batteries of 305 mAh g^?1 and excellent Coulombic efficiency. This work demonstrates that the hybrid network SPEs are promising for SSMB applications.     

Perovskite Membranes with Vertically Aligned Microchannels for All‐Solid‐State Lithium Batteries

Perovskite‐type solid‐state electrolytes exhibit great potential for the development of all‐solid‐state lithium batteries due to their high Li‐ion conductivity (approaching 10^?3 S cm^?1), wide potential window, and excellent thermal/chemical stability. However, the large solid–solid interfacial resistance between perovskite electrolytes and electrode materials is still a great challenge that hinders the development of high‐performance all‐solid‐state lithium batteries. In this work, a perovskite‐type Li_0.34La_0.51TiO₃ (LLTO) membrane with vertically aligned microchannels is constructed by a phase‐inversion method. The 3D vertically aligned microchannel framework membrane enables more effective Li‐ion transport between the cathode and solid‐state electrolyte than a planar LLTO membrane. A significant decrease in the perovskite/cathode interfacial resistance, from 853 to 133 Ω cm², is observed. It is also demonstrated that full cells utilizing LLTO with vertically aligned microchannels as the electrolyte exhibit a high specific capacity and improved rate performance.     

Reversible Short‐Circuit Behaviors in Garnet‐Based Solid‐State Batteries

Garnet‐based solid‐state electrolytes (SSEs) are attractive for solid‐state lithium metal batteries due to their wide electrochemical window, high conductivity, and excellent stability against lithium metal. However, the risk of short‐circuit encumbers the cycle life and capacity of garnet‐based solid‐state batteries without clear reason or mechanism. Here, reversible short‐circuit behavior in the garnet‐based solid‐state batteries, which differs from the short‐circuit in liquid cells, is reported for the first time. In situ neutron depth profiling is adopted to quantitatively measure Li transport, which helps forecast and confirm the reversible nature of the short‐circuit in garnet‐based batteries. A real‐time Li accumulation monitoring system of NMC//CNT/garnet/Li cell is designed to reveal the Li dendrite formation mechanism. The voltage drops of the CNT monitoring electrode during the charging process indicate the formation of Li dendrites inside the garnet bulk, while the smooth voltage profile during the discharging process demonstrates the disappearance of the short‐circuit. This is the first confirmation of short‐circuit behavior that provides clarification of the Li dendrite formation mechanism in garnet‐based solid‐state batteries, which is shown to be a reversible process caused by the low ionic conductivity and non‐negligible electronic conductivity of garnet SSEs.     

On the Functionality of Coatings for Cathode Active Materials in Thiophosphate‐Based All‐Solid‐State Batteries

The last decade has seen considerable advancements in the development of solid electrolytes for solid‐state battery applications, with particular attention being paid to sulfide superionic conductors. Importantly, the intrinsic electrochemical instability of these high‐performance separators highlights the notion that further progress in the field of solid‐state batteries is contingent on the optimization of component material interfaces in order to secure high energy and power densities, while maintaining device safety and a practical cycle life. On the cathode side, the need for a protective coating to inhibit solid electrolyte degradation is clear; however, a mechanistic understanding of the coating functionality remains unresolved, and there is still much room for improvement regarding the methodology and associated material properties. Herein, the essential requirements for a suitable coating are specified and fundamental considerations are discussed in detail. Additionally, this article will provide an overview of the various material classes, assessment protocols and practical coating methods, as well as an outlook on the development of coatings for cathode active materials in thiophosphate‐based solid‐state batteries.     

Correlating Macro and Atomic Structure with Elastic Properties and Ionic Transport of Glassy Li2S‐P2S5 (LPS) Solid Electrolyte for Solid‐State Li Metal Batteries

A combination of high ionic conductivity and facile processing suggest that sulfide‐based materials are promising solid electrolytes that have the potential to enable Li metal batteries. Although the Li₂S‐P₂S₅ (LPS) family of compounds exhibit desirable characteristics, it is known that Li metal preferentially propagates through microstructural defects, such as particle boundaries and/or pores. Herein, it is demonstrated that a near theoretical density (98% relative density) LPS 75‐25 glassy electrolyte exhibiting high ionic conductivity can be achieved by optimizing the molding pressure and temperature. The optimal molding pressure reduces porosity and particle boundaries while preserving the preferred amorphous structure. Moreover, molecular rearrangements and favorable Li coordination environments for conduction are attained. Consequently, the Young's Modulus approximately doubles (30 GPa) and the ionic conductivity increases by a factor of five (1.1 mS cm^?1) compared to conventional room temperature molding conditions. It is believed that this study can provide mechanistic insight into processing‐structure‐property relationships that can be used as a guide to tune microstructural defects/properties that have been identified to have an effect on the maximum charging current that a solid electrolyte can withstand during cycling without short‐circuiting.     

Building Lithiophilic Ion‐Conduction Highways on Garnet‐Type Solid‐State Li+ Conductors

The integration of highly conductive solid‐state electrolytes (SSEs) into solid‐state cells is still a challenge mainly due to the high impedance existing at the electrolyte/electrode interface. Although solid‐state garnet‐based batteries have been successfully assembled with the assistance of an intermediate layer between the garnet and the Li metal anode, the slow discharging/charging rates of the batteries inhibits practical applications, which require much higher power densities. Here, a crystalline sulfonated‐covalent organic framework (COF) thin layer is grown on the garnet surface via a simple solution process. It not only significantly improves the lithiophilicity of garnet electrolytes via the lithiation of the COF layer with molten Li, but also creates effective Li⁺ diffusion “highways” between the garnet and the Li metal anode. As a result, the interfacial impedance of symmetric solid‐state Li cells is significantly decreased and the cells can be operated at high current densities up to 3 mA cm^?2, which is difficult to achieve with current interfacial modification technologies for SSEs. The solid‐state Li‐ion batteries using LiFePO₄ cathodes, Li anodes, and COF‐modified garnet electrolytes thus exhibit a significantly improved rate capability.     

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

For mass production of all‐solid‐state lithium‐ion batteries (ASLBs) employing highly Li⁺ conductive and mechanically sinterable sulfide solid electrolytes (SEs), the wet‐slurry process is imperative. Unfortunately, the poor chemical stability of sulfide SEs severely restrict available candidates for solvents and in turn polymeric binders. Moreover, the binders interrupt Li⁺‐ionic contacts at interfaces, resulting in the below par electrochemical performance. In this work, a new scalable slurry fabrication protocol for sheet‐type ASLB electrodes made of Li⁺‐conductive polymeric binders is reported. The use of intermediate‐polarity solvent (e.g., dibromomethane) for the slurry allows for accommodating Li₆PS₅Cl and solvate‐ionic‐liquid‐based polymeric binders (NBR‐Li(G3)TFSI, NBR: nitrile?butadiene rubber, G3: triethylene glycol dimethyl ether, LiTFSI: lithium bis(trifluoromethanesulfonyl)imide) together without suffering from undesirable side reactions or phase separation. The LiNi_0.6Co_0.2Mn_0.2O₂ and Li₄Ti₅O₁₂ electrodes employing NBR‐Li(G3)TFSI show high capacities of 174 and 160 mA h g^?1 at 30 °C, respectively, which are far superior to those using conventional NBR (144 and 76 mA h g^?1). Moreover, high areal capacity of 7.4 mA h cm^?2 is highlighted for the LiNi_0.7Co_0.15Mn_0.15O₂ electrodes with ultrahigh mass loading of 45 mg cm^?2. The facilitated Li⁺‐ionic contacts at interfaces paved by NBR‐Li(G3)TFSI are evidenced by the complementary analysis from electrochemical and ⁷Li nuclear magnetic resonance measurements.     

Ni‐Rich Layered Cathode Materials with Electrochemo‐Mechanically Compliant Microstructures for All‐Solid‐State Li Batteries

While Ni‐rich cathode materials combined with highly conductive and mechanically sinterable sulfide solid electrolytes are imperative for practical all‐solid‐state Li batteries (ASLBs), they suffer from poor performance. Moreover, the prevailing wisdom regarding the use of Li[Ni,Co,Mn]O₂ in conventional liquid electrolyte cells, that is, increased capacity upon increased Ni content, at the expense of degraded cycling stability, has not been applied in ASLBs. In this work, the effect of overlooked but dominant electrochemo‐mechanical on the performance of Ni‐rich cathodes in ASLBs are elucidated by complementary analysis. While conventional Li[Ni_0.80Co_0.16Al_0.04]O₂ (NCA80) with randomly oriented grains is prone to severe particle disintegration even at the initial cycle, the radially oriented rod‐shaped grains in full‐concentration gradient Li[Ni_0.75Co_0.10Mn_0.15]O₂ (FCG75) accommodate volume changes, maintaining mechanical integrity. This accounts for their different performance in terms of reversible capacity (156 vs 196 mA h g^?1), initial Coulombic efficiency (71.2 vs 84.9%), and capacity retention (46.9 vs 79.1% after 200 cycles) at 30 °C. The superior interfacial stability for FCG75/Li₆PS₅Cl to for NCA80/Li₆PS₅Cl is also probed. Finally, the reversible operation of FCG75/Li ASLBs is demonstrated. The excellent performance of FCG75 ranks at the highest level in the ASLB field.