A Coaxial‐Interweaved Hybrid Lithium Metal Anode for Long‐Lifespan Lithium Metal Batteries

Lithium (Li) metal is one of the most promising anode materials to construct next‐generation rechargeable batteries owing to its ultrahigh theoretical capacity and the lowest electrochemical potential. Unfortunately, practical application of Li metal batteries is severely hindered by short lifespan and safety concerns caused by Li dendrite growth during cycling. Herein, a coaxial‐interweaved hybrid Li metal anode is proposed for dendrite inhibition that significantly improves the cycling stability of Li metal batteries. The hybrid Li metal anode is fabricated by Li composition into a 3D interweaved scaffold, where each fiber of the interwoven scaffold is composed of a conductive skeleton and a coaxial lithiophilic layer modified on the surface. The coaxial‐interweaved structure endows the hybrid anode with favored Li affinity to guide uniform Li deposition, sufficient channels for ion transportation and electron conduction, and enhanced stability during Li plating and stripping. Consequently, the hybrid Li metal anode affords high Coulombic efficiency over 98.5% for 750 cycles with dendrite‐free morphologies in half cells and improved capacity retention of 80.1% after 100 cycles in LiFePO₄ full cells. The innovative coaxial‐interweaved hybrid Li metal anode demonstrates multiscale design strategy from lithiophilic modification to scaffold construction and promises the prospect of Li metal batteries for future applications.     

Lithium Difluorophosphate‐Based Dual‐Salt Low Concentration Electrolytes for Lithium Metal Batteries

The safety hazards and low Coulombic efficiency originating from the growth of lithium dendrites and decomposition of the electrolyte restrict the practical application of Li metal batteries (LMBs). Inspired by the low cost of low concentration electrolytes (LCEs) in industrial applications, dual‐salt LCEs employing 0.1 m Li difluorophosphate (LiDFP) and 0.4 m LiBOB/LiFSI/LiTFSI are proposed to construct a robust and conductive interphase on a Li metal anode. Compared with the conventional electrolyte using 1 m LiPF₆, the ionic conductivity of LCEs is reduced but the conductivity decrement of the separator immersed in LCEs is moderate, especially for the LiDFP–LiFSI and LiDFP–LiTFSI electrolytes. The accurate Coulombic efficiency (CE) of the Li||Cu cells increases from 83.3% (electrolyte using 1 m LiPF₆) to 97.6%, 94.5%, and 93.6% for LiDFP–LiBOB, LiDFP–LiFSI, and LiDFP–LiTFSI electrolytes, respectively. The capacity retention of Li||LiFePO₄ cells using the LiDFP–LiBOB electrolyte reaches 95.4% along with a CE over 99.8% after 300 cycles at a current density of 2.0 mA cm^?2 and the capacity reaches 103.7 mAh g^?1 at a current density of up to 16.0 mA cm^?2. This work provides a dual‐salt LCE for practical LMBs and presents a new perspective for the design of electrolytes for LMBs.     

Marginal Magnesium Doping for High‐Performance Lithium Metal Batteries

Due to unparalleled theoretical capacity and operation voltage, metallic Li is considered as the most attractive candidate for lithium‐ion battery anodes. However, Li metal electrodes suffer from uncontrolled dendrite growth and consequent interfacial instability, which result in an unacceptable level of performance in cycling stability and safety. Herein, it is reported that a marginal amount (1.5 at%) of magnesium (Mg) doping alters the surface properties of Li metal foil drastically in such a way that upon Li plating, a highly dense Li whisker layer is induced, instead of sharp dendrites, with enhanced interfacial stability and cycling performance. The effect of Mg doping is explained in terms of increased surface energy, which facilitates plating of Li onto the main surface over the existing whiskers. The present study offers a useful guideline for Li metal batteries, as it largely resolves the longstanding shortcoming of Li metal electrodes without significantly sacrificing their main advantages.     

Stack Pressure Considerations for Room‐Temperature All‐Solid‐State Lithium Metal Batteries

All‐solid‐state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendrit growth at room temperature. While cell parameters such as current density, electrolyte porosity, and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior are still poorly understood. Here, failure mechanisms of lithium metal are investigated in all‐solid‐state batteries as a function of stack pressure, and in situ characterization of the interfacial and morphological properties of the buried lithium is conducted in solid electrolytes. It is found that a low stack pressure of 5 MPa allows reliable plating and stripping in a lithium symmetric cell for more than 1000 h, and a Li | Li₆PS₅Cl | LiNi_0.80Co_0.15Al_0.05O₂ full cell, plating more than 4 µm of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all‐solid‐state batteries at reasonable stack pressures.     

Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries

Safety issues caused by the metallic lithium inside a battery represent one of the main reasons for the lack of commercial availability of rechargeable lithium‐metal batteries. The advantage of anodes based on coated lithium powder (CLiP), compared to plain lithium foil, include the suppression of dendrite formation, as the local current density during stripping/plating is reduced due to the higher surface area. Another performance and safety advantage of lithium powder is the precisely controlled mass loading of the lithium anode during electrode preparation, giving the opportunity to avoid Li excess in the cell. As an additional benefit, the coating makes electrode manufacturing safer and eases handling. Here, electrodes based on coated lithium powder electrodes (CLiP) are introduced for application in lithium‐metal batteries. These electrodes are compared to lithium foil electrodes with respect to cycling stability, coulombic efficiency of lithium stripping/plating, overpotential, and morphology changes during cycling.     

Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes

In recent years, the Li metal anode has regained a position of paramount research interest because of the necessity for employing Li metal in next‐generation battery technologies such as Li‐S and Li‐O₂. Severely limiting this utilization, however, are the rapid capacity degradation and safety issues associated with rechargeable Li metal anodes. A fundamental understanding of the failure mechanism of Li metal at high charge rates has remained elusive due to the complicated interfacial chemistry that occurs between Li metal and liquid electrolytes. Here, it is demonstrated that at high current density the quick formation of a highly resistive solid electrolyte interphase (SEI) entangled with Li metal, which grows towards the bulk Li, dramatically increases up the cell impedance and this is the actual origin of the onset of cell degradation and failure. This is instead of dendritic or mossy Li growing outwards from the metal surface towards/through the separator and/or the consumption of the Li and electrolyte through side reactions. Interphase, in this context, refers to a substantive layer rather than a thin interfacial layer. Discerning the mechanisms and consequences for this interphase formation is crucial for resolving the stability and safety issues associated with Li metal anodes.     

Magnetic Field–Suppressed Lithium Dendrite Growth for Stable Lithium‐Metal Batteries

Lithium metal is the most attractive anode material due to its extremely high specific capacity, minimum potential, and low density. However, uncontrollable growth of lithium dendrite results in severe safety and cycling stability concerns, which hinders the application in next generation secondary batteries. In this paper, a new and facile method imposing a magnetic field to lithium metal anodes is proposed. That is, the lithium ions suffering Lorentz force due to the electromagnetic fields are put into spiral motion causing magnetohydrodynamics (MHD) effect. This MHD effect can effectively promote mass transfer and uniform distribution of lithium ions to suppress the dendrite growth as well as obtain uniform and compact lithium deposition. The results show that the lithium metal electrodes within the magnetic field exhibit excellent cycling and rate performance in a symmetrical battery. Additionally, full batteries using limited lithium metal as anodes and commercial LiFePO₄ as cathodes show improved performance within the magnetic field. In summary, a new and facile strategy of suppressing lithium dendrites using the MHD effect by imposing a magnetic field is proposed, which may be generalized to other advanced alkali metal batteries.     

High‐Energy Aqueous Lithium Batteries

Owing to the high voltage of lithium‐ion batteries (LIBs), the dominating electrolyte is non‐aqueous. The idea of an aqueous rechargeable lithium battery (ARLB) dates back to 1994, but it had attracted little attention due to the narrow stable potential window of aqueous electrolytes, which results in low energy density. However, aqueous electrolytes were employed during the 2000s for the fundamental studies of electrode materials in the absence of side reactions such as the decomposition of organic species. The high solubility of lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) in water has introduced new opportunities for high‐voltage ARLBs. Nonetheless, these ideas are somehow overshadowed by the common perception about the essential limitation of the aqueous electrolyte. The electrochemical behaviour of conventional electrode materials can be substantially tuned in the water‐in‐salt electrolytes. The latest idea of utilising a graphite anode in the aqueous water‐in‐salt electrolytes has paved the way towards not only 4‐V ARLB but also a new generation of Li?S batteries with a higher operating voltage and energy efficiency. Furthermore, aqueous electrolytes can provide a cathodically stable environment for Li?O₂ batteries. The present paper aims to highlight these emerging opportunities possibly leading to a new generation of LIBs, which can be substantially cheaper and safer.     

A Temperature‐Responsive Electrolyte Endowing Superior Safety Characteristic of Lithium Metal Batteries

Lithium metal batteries (LMBs) have attracted wide attention due to their high energy density. However, flammable organic carbonate electrolytes are associated with severe parasitic reactions and huge safety hazards for LMBs. Herein, a smart temperature‐responsive electrolyte is presented that demonstrates two distinct polymerization behaviors in LMBs. Through an anionic polymerization triggered by lithium metal, this electrolyte forms a favorable polymer protection layer on lithium anodes at ambient temperature, leading to a reversible Li plating/stripping behavior over 2000 h, and dendrite‐free morphology even under a current density of 10 mA cm^?2. On suffering from thermal abuse, this electrolyte can be rapidly transformed from liquid into solid by a thermal free radical polymerization, thus realizing significant improvements in safety performance without internal short‐circuit failures thus achieving safe operation even at a temperature of 150 °C. It is noted that no thermal runway occurs even at an extremely high temperature of 280 °C. It is believed that this study not only offers new valuable insights in interfacial chemistry of electrolytes, but also opens up new avenue to develop safe LMBs.     

Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries

Over the last 40 years, metallic lithium as an anode material has been of great interest owing to its high energy density. However, dendritic lithium growth causes serious safety issues. Awareness and understanding of the Li deposition and stripping processes have grown rapidly especially in recent years, and consequently, there have been many attempts to suppress the Li dendrites. Recent developments that have modified the electrolytes and the Li anode in order to inhibit the growth of Li dendrite and improve cycling performance are summarized. It has been shown that current density, solid‐electrolyte interphase (SEI) film, Li⁺ transference number, and shear modulus have significant impact on the growth behavior and the Coulombic efficiency. Various methods have been introduced to increase the surface area of the Li anode, enhance Li⁺ conductivity, form stable SEI film, and improve mechanical strength of electrolytes. These approaches are discussed in details, and the perspectives regarding the future use of Li anode are also outlined. It is hoped that this review will facilitate the future development of Li metal batteries.     

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

Lithium (Li) metal is an ideal anode material for high energy density batteries. However, the low Coulombic efficiency (CE) and the formation of dendrites during repeated plating and stripping processes have hindered its applications in rechargeable Li metal batteries. The accurate measurement of Li CE is a critical factor to predict the cycle life of Li metal batteries, but the measurement of Li CE is affected by various factors that often lead to conflicting values reported in the literature. Here, several parameters that affect the measurement of Li CE are investigated and a more accurate method of determining Li CE is proposed. It is also found that the capacity used for cycling greatly affects the stabilization cycles and the average CE. A higher cycling capacity leads to faster stabilization of Li anode and a higher average CE. With a proper operating protocol, the average Li CE can be increased from 99.0% to 99.5% at a high capacity of 6 mA h cm^?2 (which is suitable for practical applications) when a high‐concentration ether‐based electrolyte is used.     

Ultrathin,Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

All‐solid‐state batteries are promising candidates for the next‐generation safer batteries. However, a number of obstacles have limited the practical application of all‐solid‐state Li batteries (ASSLBs), such as moderate ionic conductivity at room temperature. Here, unlike most of the previous approaches, superior performances of ASSLBs are achieved by greatly reducing the thickness of the solid‐state electrolyte (SSE), where ionic conductivity is no longer a limiting factor. The ultrathin SSE (7.5 µm) is developed by integrating the low‐cost polyethylene separator with polyethylene oxide (PEO)/Li‐salt (PPL). The ultrathin PPL shortens Li⁺ diffusion time and distance within the electrolyte, and provides sufficient Li⁺ conductance for batteries to operate at room temperature. The robust yet flexible polyethylene offers mechanical support for the soft PEO/Li‐salt, effectively preventing short‐circuits even under mechanical deformation. Various ASSLBs with PPL electrolyte show superior electrochemical performance. An initial capacity of 135 mAh g^?1 at room temperature and the high‐rate capacity up to 10 C at 60 °C can be achieved in LiFePO₄/PPL/Li batteries. The high‐energy‐density sulfur cathode and MoS₂ anode employing PPL electrolyte also realize remarkable performance. Moreover, the ASSLB can be assembled by a facile process, which can be easily scaled up to mass production.     

Hollow CuS Nanoboxes as Li‐Free Cathode for High‐Rate and Long‐Life Lithium Metal Batteries

Transition metal sulfides hold promising potentials as Li‐free conversion‐type cathode materials for high energy density lithium metal batteries. However, the practical deployment of these materials is hampered by their poor rate capability and short cycling life. In this work, the authors take the advantage of hollow structure of CuS nanoboxes to accommodate the volume expansion and facilitate the ion diffusion during discharge–charge processes. As a result, the hollow CuS nanoboxes achieve excellent rate performance (≈371 mAh g^?1 at 20 C) and ultra‐long cycle life (>1000 cycles). The structure and valence evolution of the CuS nanobox cathode are identified by scanning electron microscopy, transmission electron microscopy, and X‐ray photoelectron spectroscopy. Furthermore, the lithium storage mechanism is revealed by galvanostatic intermittent titration technique and operando Raman spectroscopy for the initial charge–discharge process and the following reversible processes. These results suggest that the hollow CuS nanobox material is a promising candidate as a low‐cost Li‐free cathode material for high‐rate and long‐life lithium metal batteries.     

Dendrite‐Free and Performance‐Enhanced Lithium Metal Batteries through Optimizing Solvent Compositions and Adding Combinational Additives

The instability of lithium (Li) metal anodes due to dendritic growth and low Coulombic efficiency (CE) hinders the practical application of high‐energy‐density Li metal batteries. Here, the systematic studies of improving the stability of Li metal anodes and the electrochemical performance of Li metal batteries through the addition of combinational additives and the optimization of solvent compositions in dual‐salt/carbonate electrolytes are reported. A dendrite‐free and high CE of 98.1% for Li metal anode is achieved. The well‐protected Li metal anode and the excellent cyclability and rate capability of the 4‐V Li metal batteries are obtained. This is attributed to the formation of a robust, denser, more polymeric, and higher ionic conductive surface film on the Li metal anode via the electrochemical reductive decompositions of the electrolyte components and the ring‐opening polymerization of additives and cyclic carbonate solvents. The key findings of this work indicate that the optimization of solvent compositions and the manipulation of additives are facile and effective ways to enhance the performances of Li metal batteries.     

Regulating the Hidden Solvation‐Ion‐Exchange in Concentrated Electrolytes for Stable and Safe Lithium Metal Batteries

Lithium–sulfur batteries are attractive for automobile and grid applications due to their high theoretical energy density and the abundance of sulfur. Despite the significant progress in cathode development, lithium metal degradation and the polysulfide shuttle remain two critical challenges in the practical application of Li–S batteries. Development of advanced electrolytes has become a promising strategy to simultaneously suppress lithium dendrite formation and prevent polysulfide dissolution. Here, a new class of concentrated siloxane‐based electrolytes, demonstrating significantly improved performance over the widely investigated ether‐based electrolytes are reported in terms of stabilizing the sulfur cathode and Li metal anode as well as minimizing flammability. Through a combination of experimental and computational investigation, it is found that siloxane solvents can effectively regulate a hidden solvation‐ion‐exchange process in the concentrated electrolytes that results from the interactions between cations/anions (e.g., Li⁺, TFSI^?, and S^2?) and solvents. As a result, it could invoke a quasi‐solid‐solid lithiation and enable reversible Li plating/stripping and robust solid‐electrolyte interphase chemistries. The solvation‐ion‐exchange process in the concentrated electrolytes is a key factor in understanding and designing electrolytes for other high‐energy lithium metal batteries.