Graphene Layers‐Wrapped Fe/Fe5C2 Nanoparticles Supported on N‐doped Graphene Nanosheets for Highly Efficient Oxygen Reduction

Synthesis of highly efficient nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) superior to platinum (Pt) is still a big challenge. Herein, a new highly active ORR electrocatalyst is reported based on graphene layers‐wrapped Fe/Fe₅C₂ nanoparticles supported on N‐doped graphene nanosheets (GL‐Fe/Fe₅C₂/NG) through simply annealing a mixture of bulk graphitic carbon nitride (g‐C₃N₄) and ferrocene. An interesting exfoliation–denitrogen mechanism underlying the conversion of bulk g‐C₃N₄ into N‐doped graphene nanosheets is revealed. Owing to the high graphitic degree, optimum N‐doping level and sufficient active sites from the graphene layers‐wrapped Fe/Fe₅C₂ nanoparticles, the as‐prepared GL‐Fe/Fe₅C₂/NG electrocatalyst obtained at 800 °C exhibits outstanding ORR activity with a 20 mV more positive half‐wave potential than the commercial Pt/C catalyst in 0.1 m KOH solution and a comparable onset potential of 0.98 V. This makes GL‐Fe/Fe₅C₂/NG an outstanding electrocatalyst for ORR in alkaline solution.     

NiFe Layered Double Hydroxide Nanoparticles on Co,N‐Codoped Carbon Nanoframes as Efficient Bifunctional Catalysts for Rechargeable Zinc–Air Batteries

The future large‐scale deployment of rechargeable zinc–air batteries requires the development of cheap, stable, and efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a highly efficient bifunctional electrocatalyst is prepared by depositing 3–5 nm NiFe layered double hydroxide (NiFe‐LDH) nanoparticles on Co,N‐codoped carbon nanoframes (Co,N‐CNF). The NiFe‐LDH/Co,N‐CNF electrocatalyst displayed an OER overpotential of 0.312 V at 10 mA cm^?2 and an ORR half‐wave potential of 0.790 V. The outstanding performance of the electrocatalyst is attributable to the high electrical conductivity and excellent ORR activity of Co,N‐CNF, together with the strong anchoring of 3–5 nm NiFe‐LDH nanoparticles, which preserves active sites. Inspired by the excellent OER and ORR performance of NiFe‐LDH/Co,N‐CNF, a prototype rechargeable zinc–air battery is developed. The battery exhibited a low discharge–charge voltage gap (1.0 V at 25 mA cm^?2) and long‐term cycling durability (over 80 h), and superior overall performance to a counterpart battery constructed using a mixture of IrO₂ and Pt/C as the cathode. The strategy developed here can easily be adapted to synthesize other bifunctional CNF‐based hybrid electrodes for ORR and OER, providing a practical route to more efficient rechargeable zinc–air batteries.     

Interpenetrating Triphase Cobalt‐Based Nanocomposites as Efficient Bifunctional Oxygen Electrocatalysts for Long‐Lasting Rechargeable Zn–Air Batteries

Rational construction of atomic‐scale interfaces in multiphase nanocomposites is an intriguing and challenging approach to developing advanced catalysts for both oxygen reduction (ORR) and evolution reactions (OER). Herein, a hybrid of interpenetrating metallic Co and spinel Co₃O₄ “Janus” nanoparticles stitched in porous graphitized shells (Co/Co₃O₄@PGS) is synthesized via ionic exchange and redox between Co²⁺ and 2D metal–organic‐framework nanosheets. This strategy is proven to effectively establish highways for the transfer of electrons and reactants within the hybrid through interfacial engineering. Specifically, the phase interpenetration of mixed Co species and encapsulating porous graphitized shells provides an optimal charge/mass transport environment. Furthermore, the defect‐rich interfaces act as atomic‐traps to achieve exceptional adsorption capability for oxygen reactants. Finally, robust coupling between Co and N through intimate covalent bonds prohibits the detachment of nanoparticles. As a result, Co/Co₃O₄@PGS outperforms state‐of‐the‐art noble‐metal catalysts with a positive half‐wave potential of 0.89 V for ORR and a low potential of 1.58 V at 10 mA cm^?2 for OER. In a practical demonstration, ultrastable cyclability with a record lifetime of over 800 h at 10 mA cm^?2 is achieved by Zn–air batteries with Co/Co₃O₄@PGS within the rechargeable air electrode.     

A density functional theory study on oxygen reduction reaction on nitrogen-doped graphene

Nitrogen (N)-doped carbons reportedly exhibit good electrocatalytic activity for the oxygen reduction reaction (ORR) of fuel cells. This work provides theoretical insights into the ORR mechanism of N-doped graphene by using density functional theory calculations. All possible reaction pathways were investigated, and the transition state of each elementary step was identified. The results showed that OOH reduction was easier than O–OH breaking. OOH reduction followed a direct Eley–Rideal mechanism (the OOH species was in gas phase, but H was chemisorbed on the surface) with a significantly low reaction barrier of 0.09 eV. Pathways for both four-electron and two-electron reductions were possible. The rate-determining step of the two-electron pathway was the reduction of O₂ (formation of OOH), whereas that of the four-electron pathway was the reduction of OH into H₂O. After comparing the barriers of the rate-determining steps of the two pathways, we found that the two-electron pathway was more energetically favored than the four-electron pathway.     

Electronic and Defective Engineering of Electrospun CaMnO3 Nanotubes for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc–Air Batteries

Rational design and massive production of bifunctional catalysts with superior oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities are essential for developing metal–air batteries and fuel cells. Herein, controllable large‐scale synthesis of sulfur‐doped CaMnO₃ nanotubes is demonstrated via an electrospinning technique followed by calcination and sulfurization treatment. The sulfur doping can not only replace oxygen atoms to increase intrinsic electrical conductivity but also introduce abundant oxygen vacancies to provide enough catalytically active sites, which is further demonstrated by density functional theory calculation. The resulting sulfur‐modified CaMnO₃ (CMO/S) exhibits better electrocatalytic activity for ORR and OER in alkaline solution with higher stability performance than the pristine CMO. These results highlight the importance of sulfur treatment as a facile yet effective strategy to improve the ORR and OER catalytic activity of the pristine CaMnO₃. As a proof‐of‐concept, a rechargeable Zn–air battery using the bifunctional catalyst exhibits a small charge–discharge voltage polarization, and long cycling life. Furthermore, a solid‐state flexible and rechargeable Zn–air battery gives superior discharge–charge performance and remarkable stability. Therefore, the CMO/S nanotubes might be a promising replacement to the Pt‐based electrocatalysts for metal–air batteries and fuel cells.     

Insights into Structural Evolution of Lithium Peroxides with Reduced Charge Overpotential in Li−O2 System

Reducing charge–discharge overpotential is of great significance to enhance the efficiency and cyclability of Li?O₂ batteries. Here a dramatically reduced charge overpotential (0.4 V) via a rational design of cathode architecture, which features highly uniform Pt and Pt₃Co nanocrystals embedding within nitrogen‐doped cobalt@graphene heterostructures is successfully achieved. Because of the improvement in the catalytic efficiency for optimizing the electrical and dynamic properties, the cathode design enables promising electrochemical performance. More importantly, the results reveal different overpotentials prompted by different structural evolution of bulk Li₂O₂, which largely depends on the Pt modification approach (surface‐coating and bulk‐doping). This dependence is found to be attributed to the influence of Pt nanocomponents and their dispersion on the formation and decomposition mechanism of Li₂O₂. Density functional theory calculations provide mechanistic insights into the promotional effect of Pt and Pt₃Co on the reduction of the charge overpotential. Finally, an inner relationship between overpotential and electrochemical kinetics is proposed.     

Engineering of a Low‐Cost,Highly Active,and Durable Tantalate–Graphene Hybrid Electrocatalyst for Oxygen Reduction

The oxygen reduction reaction (ORR) is one of the most important reactions in renewable energy conversion and storage devices. The full deployment of these devices depends on the development of highly active, stable, and low‐cost catalysts. Herein, a new hybrid material consisting of Na₂Ta₈O_21?x/Ta₂O₅/Ta₃N₅ nanocrystals grown on N‐doped reduced graphene oxide is reported. This catalyst shows a significantly enhanced ORR activity by ≈4 orders of magnitude in acidic media and by ≈2 orders of magnitude in alkaline media compared to individual Na₂Ta₈O_21?x on graphene. Moreover, it has excellent stability in both acid and alkaline media. It also has much better methanol tolerance than the commercial Pt/C, which is relevant to methanol fuel cells. The high ORR activity arises not only from the synergistic effect among the three Ta phases, but also from the concomitant nitrogen doping of the reduced graphene oxide nanosheets. A correlation between ORR activity and nitrogen content is demonstrated. Deep insights into the mechanism of the synergistic effect among these three Ta‐based phases, which boosts the ORR's kinetics, are acquired by combining specific experiments and density functional theory calculations.     

Novel Route to Fe‐Based Cathode as an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Efficient bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are of great importance for rechargeable metal–air batteries. Herein, FeN_x/C catalysts are synthesized by pyrolysis of thiourea and agarose containing α‐Fe₂O₃ nanoplate as Fe precursor, where α‐Fe₂O₃ nanoplate can prevent the aggregation of carbon sheets to effectively improve the specific surface area during the carbonization process. The FeN_x/C‐700‐20 catalyst displays excellent catalytic performance for both ORR and OER activity in alkaline conditions with more positive onset potential (1.1 V vs the reversible hydrogen electrode) and half‐wave potential, higher stability, and stronger methanol tolerance in alkaline solution, which are all superior to that of the commercial Pt/C catalyst. In this study, the detailed analyses demonstrate that the coexistence of Fe‐based species and high content of Fe‐N_x both play an important role for the catalytic activity. Furthermore, FeN_x/C‐700‐20 as cathode catalyst in Zn–air battery possesses higher charge–discharge stability and power density compared with that of commercial Pt/C catalyst, displaying great potential in practical implementation of for the rechargeable energy devices.     

Bimetallic Zeolitic Imidazolite Framework Derived Carbon Nanotubes Embedded with Co Nanoparticles for Efficient Bifunctional Oxygen Electrocatalyst

Bifunctional oxygen catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with high activities and low‐cost are of prime importance and challenging in the development of fuel cells and rechargeable metal–air batteries. This study reports a porous carbon nanomaterial loaded with cobalt nanoparticles (Co@NC‐x/y) derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework, which exhibits incredibly high activity as bifunctional oxygen catalysts. For instance, the optimal catalyst of Co@NC‐3/1 has the interconnected framework structure between porous carbon and embedded carbon nanotubes, which shows the superb ORR activity with onset potential of ≈1.15 V and half‐wave potential of ≈0.93 V. Moreover, it presents high OER activity that can be further enhanced to over commercial RuO₂ by P‐doped with overpotentials of 1.57 V versus reversible hydrogen electrode at 10 mA cm^?2 and long‐term stability for 2000 circles and a Tafel slope of 85 mV dec^?1. Significantly, the nanomaterial demonstrates better catalytic performance and durability than Pt/C for ORR and commercial RuO₂ and IrO₂ for OER. These findings suggest the importance of a synergistic effect of graphitic carbon, nanotubes, exposed Co–N_x active sites, and interconnected framework structure of various carbons for bifunctional oxygen electrocatalysts.     

Ni3Fe‐N Doped Carbon Sheets as a Bifunctional Electrocatalyst for Air Cathodes

A promising bifunctional electrocatalyst is reported for air cathodes consisting of Ni₃Fe nanoparticles embedded in porous nitrogen‐doped carbon sheets (Ni₃Fe/N‐C sheets) by a facile and effective pyrolysis‐based route with sodium chloride (NaCl) crystals as a template. The Ni₃Fe/N‐C sheets show excellent catalytic activity, selectivity, and durability toward both the oxygen‐reduction and oxygen‐evolution reactions (ORR and OER). They are shown to provide a superior, low‐cost cathode for a rechargeable Zn‐air battery. At a discharge–charge current density of 10 mA cm^?2, the Ni₃Fe/N‐C sheets enable a Zn–air battery to cycle steadily up to 420 h with only a small increase in the round‐trip overpotential, outperforming the more costly Pt/C + IrO₂ mixture catalyst (160 h). With the simplicity and scalability of the synthetic approach and its remarkable bifunctional electrocatalytic performance, the Ni₃Fe/N‐C sheets offer a promising rechargeable air cathode operating at room temperature in an alkaline electrolyte.     

Superior Oxygen Reduction Reaction on Phosphorus‐Doped Carbon Dot/Graphene Aerogel for All‐Solid‐State Flexible Al–Air Batteries

Carbon dots have been recognized as one of the most promising candidates for the oxygen reduction reaction (ORR) in alkaline media. However, the desired ORR performance in metal–air batteries is often limited by the moderate electrocatalytic activity and the lack of a method to realize good dispersion. To address these issues, herein a biomass‐deriving method is reported to achieve the in situ phosphorus doping (P‐doping) of carbon dots and their simultaneous decoration onto graphene matrix. The resultant product, namely P‐doped carbon dot/graphene (P‐CD/G) nanocomposites, can reach an ultrahigh P‐doping level for carbon nanomaterials. The P‐CD/G nanocomposites are found to exhibit excellent ORR activity, which is highly comparable to the commercial Pt/C catalysts. When used as the cathode materials for a primary liquid Al–air battery, the device shows an impressive power density of 157.3 mW cm^?2 (comparing to 151.5 mW cm^?2 of a similar Pt/C battery). Finally, an all‐solid‐state flexible Al–air battery is designed and fabricated based on our new nanocomposites. The device exhibits a stable discharge voltage of ≈1.2 V upon different bending states. This study introduces a unique biomass‐derived material system to replace the noble metal catalysts for future portable and wearable electronic devices.     

Metal–Organic Framework Templated Pd@PdO–Co3O4 Nanocubes as an Efficient Bifunctional Oxygen Electrocatalyst

The development of high‐efficiency bifunctional electrocatalyst for oxygen reduction and evolution reactions (ORR/OER) is critical for rechargeable metal–air batteries, a typical electrochemical energy storage and conversion technology. This work reports a general approach for the synthesis of Pd@PdO–Co₃O₄ nanocubes using the zeolite‐type metal–organic framework (MOF) as a template. The as‐synthesized materials exhibit a high electrocatalytic activity toward OER and ORR, which is comparable to those of commercial RuO₂ and Pt/C electrocatalysts, while its cycle performance and stability are much higher than those of commercial RuO₂ and Pt/C electrocatalysts. Various physicochemical characterizations and density functional theory calculations indicate that the favorable electrochemical performance of the Pd@PdO–Co₃O₄ nanocubes is mainly attributed to the synergistic effect between PdO and the robust hollow structure composed of interconnected crystalline Co₃O₄ nanocubes. This work establishes an efficient approach for the controlled design and synthesis of MOF‐templated hybrid nanomaterials, and provides a great potential for developing high‐performance electrocatalysts in energy storage and conversion.     

Electrochemical CO2 Reduction with Atomic Iron‐Dispersed on Nitrogen‐Doped Graphene

Electrochemical reduction of CO₂ provides an opportunity to reach a carbon‐neutral energy recycling regime, in which CO₂ emissions from fuel use are collected and converted back to fuels. The reduction of CO₂ to CO is the first step toward the synthesis of more complex carbon‐based fuels and chemicals. Therefore, understanding this step is crucial for the development of high‐performance electrocatalyst for CO₂ conversion to higher order products such as hydrocarbons. Here, atomic iron dispersed on nitrogen‐doped graphene (Fe/NG) is synthesized as an efficient electrocatalyst for CO₂ reduction to CO. Fe/NG has a low reduction overpotential with high Faradic efficiency up to 80%. The existence of nitrogen‐confined atomic Fe moieties on the nitrogen‐doped graphene layer is confirmed by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure analysis. The Fe/NG catalysts provide an ideal platform for comparative studies of the effect of the catalytic center on the electrocatalytic performance. The CO₂ reduction reaction mechanism on atomic Fe surrounded by four N atoms (Fe–N₄) embedded in nitrogen‐doped graphene is further investigated through density functional theory calculations, revealing a possible promotional effect of nitrogen doping on graphene.     

Sub‐6 nm Fully Ordered L10‐Pt–Ni–Co Nanoparticles Enhance Oxygen Reduction via Co Doping Induced Ferromagnetism Enhancement and Optimized Surface Strain

Engineering the crystal structure of Pt–M (M = transition metal) nanoalloys to chemically ordered ones has drawn increasing attention in oxygen reduction reaction (ORR) electrocatalysis due to their high resistance against M etching in acid. Although Pt–Ni alloy nanoparticles (NPs) have demonstrated respectable initial ORR activity in acid, their stability remains a big challenge due to the fast etching of Ni. In this work, sub‐6 nm monodisperse chemically ordered L1₀‐Pt–Ni–Co NPs are synthesized for the first time by employing a bifunctional core/shell Pt/NiCoO_x precursor, which could provide abundant O‐vacancies for facilitated Pt/Ni/Co atom diffusion and prevent NP sintering during thermal annealing. Further, Co doping is found to remarkably enhance the ferromagnetism (room temperature coercivity reaching 2.1 kOe) and the consequent chemical ordering of L1₀‐Pt–Ni NPs. As a result, the best‐performing carbon supported L1₀‐PtNi_0.8Co_0.2 catalyst reveals a half‐wave potential (E_1/2) of 0.951 V versus reversible hydrogen electrode in 0.1 m HClO₄ with 23‐times enhancement in mass activity over the commercial Pt/C catalyst along with much improved stability. Density functional theory (DFT) calculations suggest that the L1₀‐PtNi_0.8Co_0.2 core could tune the surface strain of the Pt shell toward optimized Pt–O binding energy and facilitated reaction rate, thereby improving the ORR electrocatalysis.     

Highly Efficient Oxygen Reduction Reaction Activity of Graphitic Tube Encapsulating Nitrided CoxFey Alloy

Nonprecious metals are promising catalysts to avoid the sluggish oxygen reduction reaction (ORR) in next‐generation regenerative fuel cells or metal–air batteries. Therefore, development of nonprecious metal catalysts for ORR is highly desirable. Herein, precise tuning of the atomic ratio of Fe and Co encapsulated in melamine‐derived nitrogen‐rich graphitic tube (NGT) is reported. The Co_1.08Fe_3.34 hybrid with metal? nitrogen bonds ( 1 : Co_1.08Fe_3.34@NGT) shows remarkable ORR catalytic activities (80 mV higher in onset potential and 50 mV higher in half‐wave potential than those of state‐of‐the‐art commercial Pt/C catalysts), high current density, and stability. In acidic solution, 1 also shows compatible performance to commercial Pt/C in terms of ORR activity, current density, stability, and methanol tolerance. The high ORR activity is ascribed to the co‐existence of Fe? N, Co? N, and sufficient metallic FeCo alloys which favor faster electron movement and better adsorption of oxygen molecules on the catalyst surface. In the alkaline anion exchange membrane fuel cell setup, this cell delivers the power density of 117 mW cm^?2, demonstrating its potential use for energy conversion and storage applications.     

NiCoFe‐Layered Double Hydroxides/N‐Doped Graphene Oxide Array Colloid Composite as an Efficient Bifunctional Catalyst for Oxygen Electrocatalytic Reactions

Ternary NiCoFe‐layered double hydroxide (NiCo^IIIFe‐LDH) with Co³⁺ is grafted on nitrogen‐doped graphene oxide (N‐GO) by an in situ growth route. The array‐like colloid composite of NiCo^IIIFe‐LDH/N‐GO is used as a bifunctional catalyst for both oxygen evolution/reduction reactions (OER/ORR). The NiCo^IIIFe‐LDH/N‐GO array has a 3D open structure with less stacking of LDHs and an enlarged specific surface area. The hierarchical structure design and novel material chemistry endow high activity propelling O₂ redox. By exposing more amounts of Ni and Fe active sites, the NiCo^IIIFe‐LDH/N‐GO illustrates a relatively low onset potential (1.41 V vs reversible hydrogen electrode) in 0.1 mol L^?1 KOH solution under the OER process. Furthermore, by introducing high valence Co³⁺, the onset potential of this material in ORR is 0.88 V. The overvoltage difference is 0.769 V between OER and ORR. The key factors for the excellent bifunctional catalytic performance are believed to be the Co with a high valence, the N‐doping of graphene materials, and the highly exposed Ni and Fe active sites in the array‐like colloid composite. This work further demonstrates the possibility to exploit the application potential of LDHs as OER and ORR bifunctional electrochemical catalysts.     

Citrate‐Assisted Growth of NiCo2O4 Nanosheets on Reduced Graphene Oxide for Highly Reversible Lithium Storage

Hybrid nanostructures based on graphene and transition metal oxides hold great promise as high‐performance electrode materials for next‐generation lithium‐ion batteries. In this work, the rational design and fabrication of NiCo₂O₄ nanosheets supported on reduced graphene oxide (denoted as rGO/NiCo₂O₄) is presented as a novel anode material for highly efficient and reversible lithium storage. A solution method is applied to grow Ni‐Co precursor nanosheets on rGO, in which the addition of trisodium citrate is found crucial to guide the formation of uniform Ni‐Co precursor nanosheets. Subsequent thermal treatment results in formation of crystalline NiCo₂O₄ nanosheets on rGO without damaging the morphology. The interconnected NiCo₂O₄ nanosheets form hierarchically porous films on both sides of rGO. Such a hybrid nanostructure would effectively promote the charge transport and withstand volume variation upon prolonged charge/discharge cycling. As a result, the rGO/NiCo₂O₄ nanocomposite demonstrates high reversible capacities of 954.3 and 656.5 mAh g^–1 over 50 cycles at current densities of 200 and 500 mA g^–1 respectively, and remarkable capacity retention at increased current densities.     

Trifunctional Electrocatalysis on Dual‐Doped Graphene Nanorings–Integrated Boxes for Efficient Water Splitting and Zn–Air Batteries

Despite the exciting achievements made in synthesis of monofunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), or hydrogen evolution reaction (HER), it is challenging to develop trifunctional electrocatalysts for both ORR/OER/HER. Herein, N, O‐codoped graphene nanorings‐integrated boxes (denoted NOGB) are crafted via high‐temperature pyrolysis and following acid etching of hybrid precursors containing polymers and Prussian blue analogue cubes. The electrochemical results signified that the resulting NOGB‐800 (800 refers to pyrolysis temperature) is highly active for trifunctional electrocatalysis of ORR/OER/HER. This can be reasonably attributed to the advanced nanostructures (i.e., the hierarchically porous nanostructures on the hollow nanorings) and unique chemical compositions (i.e., N, O‐codoped graphene). More attractively, the rechargeable Zn–air battery based on NOGB‐800 displays maximum power density of 111.9 mW cm^?2 with small charge–discharge potential of 0.72 V and excellent stability of 30 h, comparable with the Pt/C+Ir/C counterpart. The NOGB‐800 could also be utilized as bifunctional electrocatalysts for overall water splitting to yield current density of 10 mA cm^?2 at a voltage of 1.65 V, surpassing most reported electrocatalysts. Therefore, the NOGB‐800 is a promising candidate instead of precious metal–based electrocatalysts for the efficient Zn–air battery and water splitting.     

Effect of annealing on down‐conversion properties of monoclinic Gd2O3:Er3+ nanophosphors

Erbium‐doped nano‐sized Gd₂O₃ phosphor was prepared by a solution combustion method in the presence of urea as a fuel. The phosphor was characterized by X‐ray diffractometry (XRD), Fourier transform infra‐red spectroscopy, energy dispersive X‐ray analysis (EDX) and transmission electron microscopy (TEM). The results of the XRD shows that the phosphor has a monoclinic phase, which was further confirmed by the TEM results. Particle size was calculated by the Debye–Scherrer formula. The erbium‐doped Gd₂O₃ nanophosphor was revealed to have good down‐conversion (DC) properties and the intensity of phosphor could be modified by annealing. The effects of annealing at 900°C on the particle size and luminescence properties were studied and compared with freshly prepared Gd₂O₃:Er³⁺ nanoparticles. The average particle sizes were calculated as 8 and 20 nm for the freshly prepared samples and samples annealed at 900°C for 1 h, respectively. The results show that both freshly prepared and annealed Gd₂O₃:Er³⁺ have monoclinic structure. Copyright © 2014 John Wiley & Sons, Ltd.     

Biaxial Strains Mediated Oxygen Reduction Electrocatalysis on Fenton Reaction Resistant L10‐PtZn Fuel Cell Cathode

PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L1₀ structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H₂O₂ (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L1₀‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L1₀‐PtZn cathode achieves outstanding activity (0.52 A mg_Pt^?1 at 0.9 V_iR‐free, and peak power density of 2.00 W cm^?2) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1? L1₀) transition of PtZn NPs would modulate the surface Pt? Pt distances and optimize Pt? O binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability.