Ultrathin 2D TiS2 Nanosheets for High Capacity and Long‐Life Sodium Ion Batteries

Sodium ion batteries are now attracting great attention, mainly because of the abundance of sodium resources and their cheap raw materials. 2D materials possess a unique structure for sodium storage. Among them, transition metal chalcogenides exhibit significant potential for rechargeable battery devices due to their tunable composition, remarkable structural stability, fast ion transport, and robust kinetics. Herein, ultrathin TiS₂ nanosheets are synthesized by a shear‐mixing method and exhibit outstanding cycling performance (386 mAh g^?1 after 200 cycles at 0.2 A g^?1). To clarify the variations of galvanostatic curves and superior cycling performance, the mechanism and morphology changes are systematically investigated. This facile synthesis method is expected to shed light on the preparation of ultrathin 2D materials, whose unique morphologies could easily enable their application in rechargeable batteries.     

Ultrathin MoS2 Nanosheets as Anode Materials for Sodium‐Ion Batteries with Superior Performance

Few‐layer MoS₂ nanosheets are successfully synthesized using a simple and scalable ultrasonic exfoliation technique. The thicknesses of the MoS₂ nanosheets ares about 10 nm as measured by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The unique nanosheet architecture renders the high‐rate transportation of sodium ions due to the short diffusion paths provided by ultrathin thickness and the large interlayer space within the MoS₂ crystal structure (d₍₀₀₂₎ = 6.38 Å). When applied as anode materials in sodium‐ion batteries, MoS₂ nanosheets exhibit a high, reversible sodium storage capacity and excellent cyclability. The MoS₂ nanosheets also demonstrate good electrochemical performance at high current densities.     

Few‐Layer Black Phosphorus Nanosheets as Electrocatalysts for Highly Efficient Oxygen Evolution Reaction

Black phosphorus (BP) is a new rediscovered layered material, which has attracted enormous interests in the field of electrocatalysis. Recent investigations reveal that bulk BP is a promising electrocatalyst for oxygen evolution reactions (OER), whereas its bulk crystal structure restricts sufficient active sites for achieving highly efficient OER catalytic performances. Toward this end, few‐layer BP nanosheets prepared by facile liquid exfoliation are applied as electrocatalysts and exhibit preferable electrocatalytic OER activity in association with structural robustness; subsequently, the dependence of current density and applied bias potential on the concentration of OH^? has also been uncovered. Most importantly, we are aware that reduction in the thickness of BP nanosheets would generate extra active sites from the ultrathin planar structure and complimenting to the electrocatalytic activities. It is further anticipated that the current work might provide further implementation about the OER performance of BP nanosheets, thereby, offering extendable availabilities for BP‐based electrocatalysts in constructing high‐performance OER devices.     

Advanced Composite 2D Energy Materials by Simultaneous Anodic and Cathodic Exfoliation

Composite materials based on graphene and other 2D materials are of considerable interest in the fields of catalysis, electronics, and energy conversion and storage because of the unique structural features and electronic properties of each component and the synergetic effects brought about by the compositing. Approaches to the mass production of 2D materials and their composites in a facile and affordable way are urgently needed to enable their implementation in practical applications. Here a novel electrochemical exfoliation approach to prepare 2D composites is proposed, which combines simultaneous anodic exfoliation of graphite and cathodic exfoliation of other 2D materials (namely MoS₂, MnO₂, and graphitic carbon nitride). The synthesis is carried out in a single‐compartment electrochemical cell to in situ produce functional 2D composite materials. Applications of the as‐prepared 2D composites are demonstrated as (i) effective hydrogen evolution catalysts and (ii) supercapacitor electrode materials. The method enables the compositing of semiconductive, or even insulating, 2D materials with conductive graphene in an easy, cheap, ecofriendly, yet efficient way, liberating the intrinsic functions of 2D materials, which are usually hindered by their poor conductivity. The method is believed to be widely applicable to the family of 2D materials.     

Manipulating Molecular Structure and Morphology to Invoke High‐Performance Sodium Storage of Copper Phosphide

Copper is used as current collector in rechargeable ion batteries due to its outstanding electronic conductivity and low cost. The intrinsic inactivity of copper, however, makes it a poor candidate for an electrode material without further structural modification. To fully utilize its high electronic conductivity, herein, the incorporation of heterogeneous phosphorus combined with building a unique 3D hollow structure is proposed. The as‐prepared copper phosphide hollow nanocubes deliver a stable capacity of 325 mAh·g^?1 at 50 mA·g^?1 and fast charging and discharging via pseudocapacitance behavior. The outstanding electrochemical performance is attributed to the synergetic effects of high electronic conductivity of copper and the high sodium storage capability of phosphorus. In addition, this facile synthesis method is also easily scaled up for practical applications. Thus, copper phosphide is a promising anode material for sodium ion batteries.     

Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells

Solution‐processed few‐layer MoS₂ flakes are exploited as an active buffer layer in hybrid lead–halide perovskite solar cells (PSCs). Glass/FTO/compact‐TiO₂/mesoporous‐TiO₂/CH₃NH₃PbI₃/MoS₂/Spiro‐OMeTAD/Au solar cells are realized with the MoS₂ flakes having a twofold function, acting both as a protective layer, by preventing the formation of shunt contacts between the perovskite and the Au electrode, and as a hole transport layer from the perovskite to the Spiro‐OMeTAD. As prepared PSC demonstrates a power conversion efficiency (η) of 13.3%, along with a higher lifetime stability over 550 h with respect to reference PSC without MoS₂ (Δη/η = ?7% vs. Δη/η = ?34%). Large‐area PSCs (1.05 cm² active area) are also fabricated to demonstrate the scalability of this approach, achieving η of 11.5%. Our results pave the way toward the implementation of MoS₂ as a material able to boost the shelf life of large‐area perovskite solar cells in view of their commercialization.     

Nitrogen‐Doped Wrinkled Carbon Foils Derived from MOF Nanosheets for Superior Sodium Storage

Preparation of hierarchical carbon nanomaterials from metal?organicframeworks (MOFs) offers immense potential in the improvement of energy density, tunability, and stability of functional materials for energy storage and conversion. How interconnected nitrogen (N)‐doped wrinkled carbon foils derived from MOF nanosheets can serve as high‐performance sodium storage materials due to their multiscale porous structure is shown here. The novel N‐doped carbon nanomaterials are synthesized through the pyrolysis of 2D Mn‐based MOFs, which are produced through the assistance of monodentate ligands to enable the planar growth of MOFs. Subsequent acid etching creates hierarchical pores and channels to allow rapid ion transport. The resulting materials achieve high‐rate capability (165 and 150 mA h g^?1 at current densities of 8 and 10 A g^?1, respectively) and high stability (capacity retention 72.8% after 1000 cycling at 1.0 A g^?1), when they are used as anode in sodium‐ion capacitors.     

2D Zn‐Hexamine Coordination Frameworks and Their Derived N‐Rich Porous Carbon Nanosheets for Ultrafast Sodium Storage

Metal‐organic coordination frameworks have been widely used as efficient precursors for the preparation of functional carbon‐based materials with various nanostructures. However, to date, the design of 2D carbon nanostructures from single coordination frameworks remains a great challenge. Herein, an efficient strategy for the fabrication of N‐rich porous carbon nanosheets from 2D Zn‐hexamine coordination framework nanosheets is developed. Remarkably, the N‐doping level of carbon nanosheets can attain 16.54 at%. In addition, the thickness of the carbon nanosheets can effectively be tuned by simply adjusting the molar ratio of the starting materials. As a proof‐of‐concept application, the as‐prepared carbon nanosheets as an anode material for sodium‐ion batteries exhibit an ultrafast sodium storage capability of 194 mAh g^?1 even at 10 A g^?1. As far as it is known, such a high‐rate capability has been rarely achieved in previous studies on carbonaceous anode materials for Na‐ion storage. Moreover, this approach is readily controllable and could be extended to prepare a series of 2D N‐doped carbon‐based nanomaterials on a large scale.     

Charge and Discharge Processes and Sodium Storage in Disodium Pyridine‐2,5‐Dicarboxylate Anode—Insights from Experiments and Theory

A combined experimental and computational study of disodium pyridine‐2,5‐dicarboxylate (Na₂PDC) is presented exploring the possibility of using it as a potential anode for organic sodium‐ion batteries. This electrode material can reversibly insert/release two Na cations per formula unit, resulting in high reversible capacity of 270 mA h g^?1 (236 mA h g^?1 after accounting for the contribution from Super P carbon) with excellent cyclability 225 mA h g^?1, with retention of 83% capacity after 100 cycles, and good rate performance with reversible capacity of 138 mA h g^?1 at a 5 C rate. The performance of disodium pyridine dicarboxylate is therefore found to be superior to that of the related and well investigated disodium terephthalate. The material shows two voltage plateaus at about 0.6 V up to Na₂₊₁PDC and then 0.4 V up to full sodiation, Na₂₊₂PDC. The first plateau is attributed to the coordination of inserted Na to nitrogen atoms with bond formation, i.e., a different mechanism from the terephthalate analog. The subsequent plateau is due to coordination to the carboxylic groups.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.     

Confining Ultrathin 2D Superlattices in Mesoporous Hollow Spheres Renders Ultrafast and High‐Capacity Na‐Ion Storage

Sodium‐ion batteries have attracted ever‐increasing attention in view of the natural abundance of sodium resources. Sluggish sodiation kinetics, nevertheless, remain a tough challenge, in terms of achieving high rate capability and high energy density. Herein, a sheet‐in‐sphere nanoconfiguration of 2D titania–carbon superlattices vertically aligned inside of mesoporous TiO₂@C hollow nanospheres is constructed. In such a design, the ultrathin 2D superlattices consist of ordered alternating monolayers of titania and carbon, enabling interpenetrating pathways for rapid transport of electrons and Na⁺ ions as well as a 2D heterointerface for Na⁺ storage. Kinetics analysis discloses that the combination of 2D heterointerface and mesoporosity results an intercalation pseudocapacitive charge storage mechanism, which triggers ultrafast sodiation kinetics. In situ transmission electron microscope imaging and in situ synchrotron X‐ray diffraction techniques elucidate that the sheet‐in‐sphere architecture can maintain robust mechanical and crystallographic structural stability, resulting an extraordinary high rate capability, remarkable stable cycling with a low capacity fading ratio of 0.04% per cycle over 500 cycles at 0.2 C, and exceptionally long‐term cyclability up to 20 000 cycles at 50 C. This study offers a method for the realization of a high power density and long‐term cyclability battery by designing of a hierarchical nanoarchitecture.     

Ultrathin Anatase TiO2 Nanosheets Embedded with TiO2‐B Nanodomains for Lithium‐Ion Storage: Capacity Enhancement by Phase Boundaries

A new form of TiO₂ microspheres comprised of anatase/TiO₂‐B ultrathin composite nanosheets has been synthesized successfully and used as Li‐ion storage electrode material. By comparison between samples obtained with different annealing temperatures, it is demonstrated that the anatase/TiO₂‐B coherent interfaces may contribute additional lithium storage venues due to a favorable charge separation at the boundary between the two phases. The as‐prepared hierarchical nanostructures show capacities of 180 and 110 mAh g^?1 after 1000 cycles at current densities of 3400 and 8500 mA g^?1. The ultrathin nanosheet structure which provides short lithium diffusion length and high electrode/electrolyte contact area also accounts for the high capacity and long‐cycle stability.     

Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage

Soft carbon has attracted tremendous attention as an anode in rocking‐chair batteries owing to its exceptional properties including low‐cost, tunable interlayer distance, and favorable electronic conductivity. However, it fails to exhibit decent performance for sodium‐ion storage owing to difficulties in the formation of sodium intercalation compounds. Here, microporous soft carbon nanosheets are developed via a microwave induced exfoliation strategy from a conventional soft carbon compound obtained by pyrolysis of 3,4,9,10‐perylene tetracarboxylic dianhydride. The micropores and defects at the edges synergistically leads to enhanced kinetics and extra sodium‐ion storage sites, which contribute to the capacity increase from 134 to 232 mAh g^?1 and a superior rate capability of 103 mAh g^?1 at 1000 mA g^?1 for sodium‐ion storage. In addition, the capacitance‐dominated sodium‐ion storage mechanism is identified through the kinetics analysis. The in situ X‐ray diffraction analyses are used to reveal that sodium ions intercalate into graphitic layers for the first time. Furthermore, the as‐prepared nanosheets can also function as an outstanding anode for potassium‐ion storage (reversible capacity of 291 mAh g^?1) and dual‐ion full cell (cell‐level capacity of 61 mAh g^?1 and average working voltage of 4.2 V). These properties represent the potential of soft carbon for achieving high‐energy, high‐rate, and low‐cost energy storage systems.     

Opening Two‐Dimensional Materials for Energy Conversion and Storage: A Concept

The development of two‐dimensional (2D) materials is experiencing a renaissance since the adventure of graphene. 2D materials typically exhibit strong in‐plane covalent bonding and weak out‐of‐plane van der Waals interactions through the interlayer gap. Opening 2D materials is an effective way to alter the physical and chemical properties, such as band gap, conductivity, optical property, thermoelectric property, photovoltaic property and superconductivity. A larger interlayer distance means more accessible active sites for catalysis, an ion‐accessible surface in the interlayer space, which may greatly enhance the performance of 2D materials for energy conversion and storage. Moreover, opening 2D materials by intercalation can change the band filling state and the Fermi level. This review mainly focuses on the opening of 2D materials and their subsequent applications in energy conversion and storage fields, expecting to promote the development of such a new class of materials, namely expanded 2D materials. The exciting progresses of these expanded materials made in both energy conversion and storage devices including solar cells, thermoelectric devices, electrocatalyst, supercapacitors and rechargeable batteries, is presented and discussed in depth. Furthermore, prospects and further developments in these exciting fields of the expanded 2D materials are also commented.     

Nitrogen‐Doping‐Induced Defects of a Carbon Coating Layer Facilitate Na‐Storage in Electrode Materials

A nitrogen‐doped, carbon‐coated Na₃V₂(PO₄)₃ cathode material is synthesized and the formation of doping type of nitrogen‐doped in carbon coating layer is systemically investigated. Three different carbon‐nitrogen species: pyridinic N, pyrrolic N, and quaternary N are identified. The most important finding is that different carbon‐nitrogen species in the carbon layer have different impacts on the improvement of the electrochemical properties of Na₃V₂(PO₄)₃. Pyridinic N and pyrrolic N significantly increase the electronic conductivity and create numerous extrinsic defects and active sites. Quaternary N only increases the electronic conductivity without creating extrinsic defects. Therefore, it is unexpectedly demonstrated that the Na₃V₂(PO₄)₃/C+N, in which with minimize content of quaternary N or exist most extrinsic defects, exhibits the best electrochemical performance, particularly the rate performance and cycling stability. For example, when the discharging rate increased from 0.2 C to 5 C, its capacity of 101.9 mAh g^?1 decays to 84.3 mAh g^?1 and an amazing capacity retention of 83% is achieved. Moreover, even at higher current density of 5 C, an excellent capacity retention of 93% is maintained even after 100 cycles.     

Anodes and Sodium‐Free Cathodes in Sodium Ion Batteries

The increase in electricity generation poses growing demands on energy storage systems, thus offering a chance for the success of the reliable and cost‐effective energy storage technologies. Sodium ion batteries are emerging as such a technology, which is however not yet mature enough to enter the market. At the crux of building practical sodium ion batteries is the development of electrode materials that promise sufficient cost‐ and performance‐competitiveness. As such, herein, all typical sodium storage materials are discussed, considering their fabrication methods and sodiation mechanisms in detail. A comprehensive cross‐literature and cross‐material comparison, which also includes the related thermodynamic analysis of their sodiation products, is also provided. The review focusses particularly on anodes and sodium‐free cathodes, as they both play the role of the acceptor rather than the donor of sodium ions in their operation in batteries; their difference lies in the (de‐)sodiation voltage. In the discussion, special attention is paid to contradictory observations and interpretations in contemporary sodium ion battery research, since debates on these controversies are likely to fuel future sodium battery research.     

Transition from Diffusion‐Controlled Intercalation into Extrinsically Pseudocapacitive Charge Storage of MoS2 by Nanoscale Heterostructuring

2D nanomaterials have been found to show surface‐dominant phenomena and understanding this behavior is crucial for establishing a relationship between a material's structure and its properties. Here, the transition of molybdenum disulfide (MoS₂) from a diffusion‐controlled intercalation to an emergent surface redox capacitive behavior is demonstrated. The ultrafast pseudocapacitive behavior of MoS₂ becomes more prominent when the layered MoS₂ is downscaled into nanometric sheets and hybridized with reduced graphene oxide (RGO). This extrinsic behavior of the 2D hybrid is promoted by the fast Faradaic charge‐transfer kinetics at the interface. The heterostructure of the 2D hybrid, as observed via high‐angle annular dark field–scanning transmission electron microscopy and Raman mapping, with a 1T MoS₂ phase at the interface and a 2H phase in the bulk is associated with the synergizing capacitive performance. This 1T phase is stabilized by the interactions with the RGO. These results provide fundamental insights into the surface effects of 2D hetero‐nanosheets on emergent electrochemical properties.     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.     

Integrated Intercalation‐Based and Interfacial Sodium Storage in Graphene‐Wrapped Porous Li4Ti5O12 Nanofibers Composite Aerogel

Sodium storage in both solid–liquid and solid–solid interfaces is expected to extend the horizon of sodium‐ion batteries, leading to a new strategy for developing high‐performance energy‐storage materials. Here, a novel composite aerogel with porous Li₄Ti₅O₁₂ (PLTO) nanofibers confined in a highly conductive 3D‐interconnected graphene framework (G‐PLTO) is designed and fabricated for Na storage. A high capacity of 195 mA h g^?1 at 0.2 C and super‐long cycle life up to 12 000 cycles are attained. Electrochemical analysis shows that the intercalation‐based and interfacial Na storage behaviors take effect simultaneously in the G‐PLTO composite aerogel. An integrated Na storage mechanism is proposed. This study ascribes the excellent performance to the unique structure, which not only offers short pathways for Na⁺ diffusion and conductive networks for electron transport, but also guarantees plenty of PLTO–electrolyte and PLTO–graphene interfacial sites for Na⁺ adsorption.