Electron‐Beam‐Related Studies of Halide Perovskites: Challenges and Opportunities

Electron beam microscopy and related characterization techniques play an important role in revealing the microstructural, morphological, physical, and chemical information of halide perovskites and their impact on associated optoelectronic devices. However, electron beam irradiation usually causes damage to these beam‐sensitive materials, negatively impacting their device performance, and complicating this interpretation. In this article, the electron microscopy and spectroscopy techniques are reviewed that are crucial for the understanding of the crystallization and microstructure of halide perovskites. In addition, special attention is paid to assessing and mitigating the electron beam‐induced damage caused by these techniques. Since the halide perovskites are fragile, a protocol involving delicate control of both electron beam dose and dose rate, coupled with careful data analysis, is key to enable the acquisition of reliable structural and compositional information such as atomic‐resolution images, chemical elemental mapping and electron diffraction patterns. Limiting the electron beam dose is critical parameter enabling the characterization of various halide perovskites. Novel methods to unveil the mechanisms of device operation, including charge carrier generation, diffusion, and extraction are presented in scanning electron microscopy studies combined with electron‐beam‐induced current and cathodoluminescence mapping. Future opportunities for electron‐beam‐related characterizations of halide perovskites are also discussed.     

Hybrid Perovskites: Effective Crystal Growth for Optoelectronic Applications

Outstanding material properties of organic‐inorganic hybrid perovskites have triggered a new insight into the next‐generation solar cells. Beyond solar cells, a wide range of controllable properties of hybrid perovskites, particularly depending on crystal growth conditions, enables versatile high‐performance optoelectronic devices such as light‐emitting diodes, photodetectors, and lasers. This article highlights recent progress in the crystallization strategies of organic–inorganic hybrid perovskites for use as effective light harvesters or light emitters. Fundamental background on perovskite crystalline structures and relevant optoelectronic properties such as optical band‐gap, electron‐hole behavior, and energy band alignment are given. A detailed overview of the effective crystallization methods for perovskites, including thermal treatment, additives, solvent mediator, laser irradiation, nanostructure, and crystal dimensionalityis reported offering a comprehensive correlation among perovskite processing conditions, crystalline morphology, and relevant device performance. Finally, future research directions to overcome current practical bottlenecks and move towards reliable high performance perovskite optoelectronic applications are proposed.     

Metal Halide Perovskite Materials for Solar Cells with Long‐Term Stability

Metal halide perovskite solar cells (PSCs) have emerged as promising candidates for photovoltaic technology with their power conversion efficiencies over 23%. For prototypical organic–inorganic metal halide perovskites, their intrinsic instability poses significant challenges to the commercialization of PSCs. Recently, the scientific community has done tremendous work in composition engineering to develop more robust light‐absorbing layers, including mixed‐ion hybrid perovskites, low‐dimensional hybrid perovskites, and all‐inorganic perovskites. This review provides an overview of the impact of these perovskites on the efficiency and long‐term stability of PSCs.     

Perovskite Solar Cells: Can We Go Organic‐Free,Lead‐Free,and Dopant‐Free?

Having demonstrated incredibly fast progress in power conversion efficiency, rising to a level comparable with that of crystalline silicon cells, lead‐based organic–inorganic hybrid perovskite solar cells are now facing the stability tests needed for industrialization. Poor thermal stability (<150 °C) owing to organic constituents and interlayer diffusion of materials (dopants), and environmental incompatibility due to Pb has surged the development of organic‐free, Pb‐free perovskites and dopant‐free hole transport materials (HTMs). The recent rapid increase in efficiency of cells based on inorganic perovskites, crossing 18%, demonstrates the great potential of inorganic perovskites as thermally stable and high‐efficiency cells. Although all kinds of Pb‐free perovskites lag in efficiency in comparison to the hybrid and inorganic perovskites, they also demonstrate better structural and environmental stability. The performance of dopant‐free HTMs matching/surpassing dopant‐containing HTMs makes the former a better choice for stability. Even though the efforts to enhance the stability of Pb‐based hybrid perovskites should continue by different techniques, organic‐free and lead‐free perovskites, and dopant‐free HTMs must be pursued with greater interest for the future. This review describes the present issues and possible strategies to address them, and thus will help to improve the overall performance of robust organic‐free, Pb‐free, and dopant‐free perovskite solar cells.     

Imaging Carrier Dynamics and Transport in Hybrid Perovskites with Transient Absorption Microscopy

In this review, the recent progress in using transient absorption microscopy to image charge transport and dynamics in semiconducting hybrid organic–inorganic perovskites is discussed. The basic principles, instrumentation, and resolution of transient absorption microscopy are outlined. With temporal resolution as high as 10 fs, sub‐diffraction‐limit spatial resolution, and excited‐state structural resolution, these experiments have provided crucial details on charge transport mechanisms that have been previously obscured in conventional ultrafast spectroscopy measurements. Morphology‐dependent mapping unveils spatial heterogeneity in carrier recombination and cooling dynamics. By spatially separating the pump and probe beams, carrier transport across grain boundaries has been directly visualized. Further, femtosecond temporal resolution allows for the examination of nonequilibrium transport directly, revealing extraordinarily long‐range hot carrier migration. The application of transient absorption microscopy is not limited to hybrid perovskites but can also be useful for other polycrystalline materials in which morphology plays an important role in carrier transport.     

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

Energy dispersive X-ray spectroscopy within the scanning transmission electron microscope (STEM) provides accurate elemental analysis with high spatial resolution, and is even capable of providing atomically resolved elemental maps. In this technique, a highly focused electron beam is incident upon a thin sample and the energy of emitted X-rays is measured in order to determine the atomic species of material within the beam path. This elementally sensitive spectroscopy technique can be extended to three dimensional tomographic imaging by acquiring multiple spectrum images with the sample tilted along an axis perpendicular to the electron beam direction.Elemental distributions within single nanoparticles are often important for determining their optical, catalytic and magnetic properties. Techniques such as X-ray tomography and slice and view energy dispersive X-ray mapping in the scanning electron microscope provide elementally sensitive three dimensional imaging but are typically limited to spatial resolutions of > 20 nm. Atom probe tomography provides near atomic resolution but preparing nanoparticle samples for atom probe analysis is often challenging. Thus, elementally sensitive techniques applied within the scanning transmission electron microscope are uniquely placed to study elemental distributions within nanoparticles of dimensions 10-100 nm.Here, energy dispersive X-ray (EDX) spectroscopy within the STEM is applied to investigate the distribution of elements in single AgAu nanoparticles. The surface segregation of both Ag and Au, at different nanoparticle compositions, has been observed.     

The integrative role of cryo electron microscopy in molecular and cellular structural biology

After gradually moving away from preparation methods prone to artefacts such as plastic embedding and negative staining for cell sections and single particles, the field of cryo electron microscopy (cryo‐EM) is now heading off at unprecedented speed towards high‐resolution analysis of biological objects of various sizes. This ‘revolution in resolution’ is happening largely thanks to new developments of new‐generation cameras used for recording the images in the cryo electron microscope which have much increased sensitivity being based on complementary metal oxide semiconductor devices. Combined with advanced image processing and 3D reconstruction, the cryo‐EM analysis of nucleoprotein complexes can provide unprecedented insights at molecular and atomic levels and address regulatory mechanisms in the cell. These advances reinforce the integrative role of cryo‐EM in synergy with other methods such as X‐ray crystallography, fluorescence imaging or focussed‐ion beam milling as exemplified here by some recent studies from our laboratory on ribosomes, viruses, chromatin and nuclear receptors. Such multi‐scale and multi‐resolution approaches allow integrating molecular and cellular levels when applied to purified or in situ macromolecular complexes, thus illustrating the trend of the field towards cellular structural biology.     

Roles of Organic Molecules in Inorganic CsPbX3 Perovskite Solar Cells

Over 25% efficiencies have been achieved by organic–inorganic hybrid perovskite solar cells (PSCs). However, their practical applications are limited by the instability of the hybrid perovskite materials. Replacing hybrid perovskites with inorganic CsPbX₃ perovskites shows great promise to address the above issue and much progress has been made. To achieve high efficiency and stable inorganic CsPbX₃ PSCs, organic molecular engineering has been playing a vital role. Herein, the progress of the organic molecular engineering in inorganic CsPbX₃ PSCs is systematically reviewed. First, structure evolution induced by organic molecular engineering for inorganic CsPbX₃ perovskites is demonstrated. Then, organic molecular engineering in CsPbX₃ PSCs is categorized and reviewed (alloying in perovskite structures, as sacrificial agents, forming 2D structures, and modifying surfaces and interfaces). Finally, future research directions are suggested to further improve the performance of inorganic PSCs.     

MACl‐Assisted Ge Doping of Pb‐Hybrid Perovskite: A Universal Route to Stabilize High Performance Perovskite Solar Cells

Interfacial engineering, grain boundary, and surface passivation in organic–inorganic hybrid perovskite solar cells (HyPSCs) are effective in achieving high performance and enhanced durability. Organic additives and inorganic doping are generally used to chemically modify the surface contacting charge transport layers, and/or grain boundaries so as to reduce the defect density. Here, a simple but tricky one‐step method to dope organic–inorganic hybrid perovskite with Ge for the first time is reported. Unlike Ge doping to all‐inorganic perovskites, application of GeI₂ in organic–inorganic perovskite precursors is challenging due to the extremely poor solubility of GeI₂ in hybrid perovskite ink, leading to failure in the formation of uniform films. However, it is found that addition of methylammonium chloride (MACl) into the precursor remarkably increases the solubility of GeI₂. This MACl‐assisted Ge doping of hybrid perovskites produces high‐quality crystalline film with its surface passivated with nonvolatile GeI₂ (GeO₂) and the volatile MACl additive also improves the uniformity of GeO₂ distribution in the perovskite films. The resulting Ge‐doped mixed cation and mixed halide perovskite films with composition FA_0.83MA_0.17Ge_0.03Pb_0.97(I_0.9Br_0.1)₃ show superior photoluminescence lifetime, power conversion efficiency above 22%, and greater stability toward illumination and humidity, outperforming photovoltaic properties of HyPSCs prepared without the Ge doping.     

Morphology Controlling of All‐Inorganic Perovskite at Low Temperature for Efficient Rigid and Flexible Solar Cells

All‐inorganic cesium lead halide (CsPbX₃) perovskites have emerged as promising photovoltaic materials owing to their superior thermal stability compared to traditional organic–inorganic hybrid counterparts. However, the CsPbX₃ perovskites generally need to be prepared at high‐temperature, which restricts their application in multilayer or flexible solar cells. Herein, the formation of CsPbX₃ perovskites at room‐temperature (RT) induced by dimethylsulphoxide (DMSO) coordination is reported. It is further found that a RT solvent (DMSO) annealing (RTSA) treatment is valid to control the perovskite crystallization dynamics, leading to uniform and void‐free films, and consequently a maximum power conversion efficiency (PCE) of 6.4% in the device indium tin oxide (ITO)/NiO _x /RT‐CsPbI₂Br/C₆₀/Bathocuproine (BCP)/Ag, which is, as far as it is known, the first report of RT solution‐processed CsPbX₃‐based perovskite solar cells (PSCs). Moreover, the efficiency can be boosted up to 10.4% by postannealing the RTSA‐treated perovskite film at an optimal temperature of 120 °C. Profiting from the moderate temperature, flexible PSCs are also demonstrated with a maximum PCE of 7.3% for the first time. These results may stimulate further development of all‐inorganic CsPbX₃ perovskites and their application in flexible electronics.     

A Review and Perspective on Cathodoluminescence Analysis of Halide Perovskites

Halide perovskite solar cells have achieved a certified efficiency of 25.2%, surpassing CdTe and CuInGaSe₂, which have long been regarded as the most‐efficient thin‐film photovoltaic materials. As this exciting class of materials continues to mature, researchers will require characterization techniques capable of exposing the interplay among structure, chemistry, and optoelectronic properties to inform processing strategies and increase both device efficiencies and long‐term stability. Cathodoluminescence microscopy is an ideal technique to provide such information due to the high spatial resolution and robust optical information acquired. Here, the current body of work related to cathodoluminescence analysis of halide perovskite materials for optoelectronic applications is surveyed. This review demonstrates how cathodoluminescence can monitor degradation due to environmental stressors, phase segregation resulting from material processing, and other halide perovskite‐centric material issues. A persistent concern associated with e‐beam‐based analysis of halide perovskites is what effect the electron beam has on the material properties being probed. Addressing this, a detailed discussion is provided on the origin of the cathodoluminescence signal and a review of studies focused on revealing changes in the properties of halide perovskites resulting from e‐beam excitation. Finally, a perspective on future opportunities to expand the role of cathodoluminescence analysis for halide perovskites is provided.     

Effects of Voltage Biasing on Current Extraction in Perovskite Solar Cells

The recent rapid increase in efficiency of organic–inorganic perovskite solar cells (PSCs) has resulted in a need to develop a clear understanding of their stability and working mechanisms. In particular, it has been suggested that ion migration contributes to the commonly observed hysteresis in the current–voltage measurements of PSCs, but the rate of ion migration and its effects on the electronic properties of PSCs remain to be addressed. In this work, electron‐beam‐induced current (EBIC) is used to directly map changes in local current extraction in organic–inorganic PSCs under applied voltage. By combining EBIC mapping, standard current–voltage measurements, and external quantum efficiency measurements, it is shown that between the two potential roles that point defects play in device enhancement under voltage biasing, the effects caused by defect‐mediated ion migration outweigh the effects from the filling of trap states caused by these defects. Evidence is also provided for ion migration preferentially at local features such as extended defects. The measured timescale of tens of seconds for migration across a full device imply that ion migration contributes indirectly to the electronic capacitance of perovskite devices through interface charging.     

Interface Engineering Driven Stabilization of Halide Perovskites against Moisture,Heat, and Light for Optoelectronic Applications

Moisture, heat, and light instabilities of halide perovskites (HPs) represent a serious Achilles' heel that must be overcome, to enable future advancements in perovskite‐based optoelectronic devices such as solar cells and light‐emitting diodes. The instabilities are attributed to the unavoidable fragile ionic bonding between cationic and anionic parts of HPs during their formation. Surface passivation of HPs by various surface‐passivating materials has proven to be an attractive approach to stabilize perovskites against moisture, heat, and light, keeping intact their structural integrity and ionic bonding. Herein, the experimental and theoretical background for degradation mechanisms of HPs is reviewed along with various surface passivating materials to stabilize HPs. Finally, the existing challenges associated with thin‐film and device fabrication and an outlook for improving the stability of perovskites in optoelectronics are presented     

Perovskite Chalcogenides with Optimal Bandgap and Desired Optical Absorption for Photovoltaic Devices

Solar cells with organic‐inorganic lead halide perovskites have achieved great success and their power conversion efficiency (PCE) has reached to 22.1%. To address the toxicology of lead element and some stability issues associated with the organic‐inorganic lead halide perovskites, inorganic lead‐free perovskites have gained more attentions from the photovoltaic research community. Herein, a series of chalcogenide perovskites are proposed as optical absorber materials for thin‐film solar cells. SrSnSe₃ and SrSnS₃ are predicted to be direct bandgap semiconductors with the bandgap value being within the optimal range of 0.9–1.6 eV. Both SrSnSe₃ and SrSnS₃ not only exhibit good optical absorption properties and carrier mobility, but also possess flexible bandgaps that can be continuously tuned within the grange of 0.9–1.6 eV via the element‐mixing strategy, thereby render both perovskites as promising candidates for photovoltaic applications.     

Molecular Engineered Hole‐Extraction Materials to Enable Dopant‐Free,Efficient p‐i‐n Perovskite Solar Cells

Two hole‐extraction materials (HEMs), TPP‐OMeTAD and TPP‐SMeTAD, have been developed to facilitate the fabrication of efficient p‐i‐n perovskite solar cells (PVSCs). By replacing the oxygen atom on HEM with sulfur (from TPP‐OMeTAD to TPP‐SMeTAD), it effectively lowers the highest occupied molecular orbital of the molecule and provides stronger Pb? S interaction with perovskites, leading to efficient charge extraction and surface traps passivation. The TPP‐SMeTAD‐based PVSCs exhibit both improved photovoltaic performance and reduced hysteresis in p‐i‐n PVSCs over those based on TPP‐OMeTAD. This work not only provides new insights on creating perovskite‐HEM heterojunction but also helps in designing new HEM to enable efficient organic–inorganic hybrid PVSCs.     

The Application of Electron Backscatter Diffraction on Halide Perovskite Materials

Recently, the application of electron backscatter diffraction (EBSD) in halide perovskites has enabled the correlation of the micro‐structural arrangement of polycrystalline grains with other properties (optical, electrical, mechanical, and chemical) in a “pixel‐by‐pixel” approach. Most studies so far have used an ultra‐sensitive electron beam detector that has sensitivity thousands of times higher than a traditional scintillator screen and charge coupled device camera, enabling much lower beam currents. An alternative approach has been the use of low vacuum measurement conditions to avoid charge buildup that leads to damage. This review focuses on introducing the classical EBSD technique to the halide perovskite community, where it has been highly underutilized due to beaminduced damage in these relatively unstable materials. Recent research is used to dispel some common misconceptions about grain boundaries in halide perovskites and highlight what has been learned by comparing and correlating EBSD with other techniques. Additionally, the remaining limitations, development challenges, and future of the EBSD technique for halide perovskites are discussed. Successful utilization of the EBSD technique as a common characterization tool in the halide perovskite community will enable scientists and engineers to develop maps of cross correlated properties, helping to unlock the full potential of this complex material system.     

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Recently, the stability of organic–inorganic perovskite thin films under thermal, photo, and moisture stresses has become a major concern for further commercialization due to the high volatility of the organic cations in the prototype perovskite composition (CH₃NH₃PbI₃). All inorganic cesium (Cs) based perovskite is an alternative to avoid the release or decomposition of organic cations. Moreover, substituting Pb with Sn in the organic–inorganic lead halide perovskites has been demonstrated to narrow the bandgap to 1.2–1.4 eV for high‐performance perovskite solar cells. In this work, a series of CsPb_1?xSn_xIBr₂ perovskite alloys via one‐step antisolvent method is demonstrated. These perovskite films present tunable bandgaps from 2.04 to 1.64 eV. Consequently, the CsPb_0.75Sn_0.25IBr₂ with homogeneous and densely crystallized morphology shows a remarkable power conversion efficiency of 11.53% and a high V_oc of 1.21 V with a much improved phase stability and illumination stability. This work provides a possibility for designing and synthesizing novel inorganic halide perovskites as the next generation of photovoltaic materials.     

Localized Traps Limited Recombination in Lead Bromide Perovskites

Traps exert an omnipotent influence over the performance of halide perovskite optoelectronic devices. A clear understanding of the origin and nature of the traps in halide perovskites is the key to controlling them and realizing optimal devices. Herein, the role of localized traps on the optical properties of lead bromide perovskite films is investigated. In the low‐temperature orthorhombic phase of CH₃NH₃PbBr₃ perovskite, band‐edge carrier dynamics exhibit a power‐law decay due to the presence of structural‐disorder‐induced localized traps, which has a depth of ≈40 meV. The continuous distribution of these localized traps gives rise to a broad sub‐band‐gap emission that becomes more prominent in thicker films with a larger trap density. The presence of this emission only from the hybrid organic–inorganic perovskites points to the vital role of organic dipoles in localized trap states formation. This study explicates the nature of these localized traps as well as their nontrivial role in carrier recombination kinetics, which is of fundamental importance in perovskites optoelectronics.     

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

All‐inorganic perovskite semiconductors have recently drawn increasing attention owing to their outstanding thermal stability. Although all‐inorganic perovskite solar cells (PSCs) have achieved significant progress in recent years, they still fall behind their prototype organic–inorganic counterparts owing to severe energy losses. Therefore, there is considerable interest in further improving the performance of all‐inorganic PSCs by synergic optimization of perovskite films and device interfaces. This review article provides an overview of recent progress in inorganic PSCs in terms of lead‐based and lead‐free composition. The physical properties of all‐inorganic perovskite semiconductors as well as the hole/electron transporting materials are discussed to unveil the important role of composition engineering and interface modification. Finally, a discussion of the prospects and challenges for all‐inorganic PSCs in the near future is presented.     

Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells

2D organic–inorganic hybrid Ruddlesden–Popper perovskites have emerged recently as candidates for the light‐absorbing layer in solar cell technology due largely to their impressive operational stability compared with their 3D‐perovskite counterparts. The methods reported to date for the preparation of efficient 2D perovksite layers for solar cells involve a nonscalable spin‐coating step. In this work, a facile, spin‐coating‐free, directly scalable drop‐cast method is reported for depositing precursor solutions that self‐assemble into highly oriented, uniform 2D‐perovskite films in air, yielding perovskite solar cells with power conversion efficiencies (PCE) of up to 14.9% (certified PCE of 14.33% ± 0.34 at 0.078 cm²). This is the highest PCE to date for a solar cell with 2D‐perovskite layers fabricated by nonspin‐coating method. The PCEs of the cells display no evidence of degradation after storage in a nitrogen glovebox for more than 5 months. 2D‐perovskite layer deposition using a slot‐die process is also investigated for the first time. Perovskite solar cells fabricated using batch slot‐die coating on a glass substrate or R2R slot‐die coating on a flexible substrate produced PCEs of 12.5% and 8.0%, respectively.